Antifouling properties of layer by layer DNA coatings

Biofilm formation of Pseudomonas aeruginosa in spaceflight is minimized on lubricant impregnated surfaces

The undesirable, yet inevitable, presence of bacterial biofilms in spacecraft poses a risk to the proper functioning of systems and to astronauts' health. To mitigate the risks that arise from them, it is important to understand biofilms' behavior in microgravity. As part of the Space Biofilms project, biofilms of Pseudomonas aeruginosa were grown in spaceflight over material surfaces. Stainless Steel 316 (SS316) and passivated SS316 were tested for their relevance as spaceflight hardware components, while a lubricant impregnated surface (LIS) was tested as potential biofilm control strategy. The morphology and gene expression of biofilms were characterized. Biofilms in microgravity are less robust than on Earth. LIS strongly inhibits biofilm formation compared to SS. Furthermore, this effect is even greater in spaceflight than on Earth, making LIS a promising option for spacecraft use. Transcriptomic profiles for the different conditions are presented, and potential mechanisms of biofilm reduction on LIS are discussed.

Factors Influencing Pseudomonas aeruginosa Initial Adhesion and Evolution at the Dodecane-Water Interface

Bacterial adhesion and evolution at the oil-water interface are important for a broad range of applications such as food manufacturing and microbial-enhanced oil recovery, etc. However, our understanding on bacterial interfacial adhesion and evolution, particularly at the single-cell level, is still far from complete. In this work, by employing Pseudomonas aeruginosa PAO1 at the dodecane-water interface as a model system, we have studied the effects of different factors on bacterial interfacial adhesion and the dynamic evolution of bacterial interfacial behavior at the single-cell level. The results show that PAO1 cells displayed a chemotactic behavior toward dodecane. Among the tested factors, bacterial initial interfacial attachment showed a negative correlation with the secreted cell-surface associated lipopolysaccharide and Psl while a positive correlation with type IV pili. Adding nonbiological surfactant Pluronic F-127, as expected, greatly reduced the cell interfacial adhesion. More importantly, the dynamics analysis of cell attachment/detachment at the dodecane-water interface over a long-time scale revealed a reversible to irreversible attachment transition of cells. This transition is accompanied with the interface aging resulting from bacterial activities, which led to an increase of the interfacial viscoelasticity with time and finally the formation of the gel-like interface. Further analysis demonstrated the important role of exopolysaccharides in the latter process. Our findings provide more details of bacterial oil-water interfacial behavior at the single-cell level and may shed light on developing new strategies for controlling bacterial colonization at the oil-water interface.

A visible-light activated ROS generator multilayer film for antibacterial coatings

The current scenario of antibiotic-resistant bacteria and pandemics caused by viruses makes research in the area of antibacterial and antiviral materials and surfaces more urgent than ever. In this regard, salicylideneimine based tetracoordinate boron-containing organic compounds are emerging as a new class of photosensitizers for singlet oxygen generation. However, the inherent inability of small organic molecules to be processed limits their potential use in functional coatings. Here we show the synthesis of a novel polymer functionalized with diiodosalicylideneimine-boron difluoride (PEI-BF2) and its utility for surface coating inside glass vials via layer-by-layer (LbL) assembly. The multilayer thin films are characterized using AFM and UV-Vis spectroscopy and the resultant coatings display excellent stability. The multilayer coating could be activated using visible light, and owing to the photocatalytic activity of the incorporated PEI-BF2, the surface coating is able to generate singlet oxygen efficiently upon light irradiation. Further, the multilayer coated surfaces exhibit remarkable antimicrobial activity towards both Gram-positive and Gram-negative bacteria under a variety of conditions. Thus, owing to the simple synthesis and the convenient methodology adopted for the preparation of multilayer coatings, the material reported here could pave the way for the development of sunlight activated large area self-sterile surfaces.

Dental Materials for Oral Microbiota Dysbiosis: An Update

The balance or dysbiosis of the microbial community is a major factor in maintaining human health or causing disease. The unique microenvironment of the oral cavity provides optimal conditions for colonization and proliferation of microbiota, regulated through complex biological signaling systems and interactions with the host. Once the oral microbiota is out of balance, microorganisms produce virulence factors and metabolites, which will cause dental caries, periodontal disease, etc. Microbial metabolism and host immune response change the local microenvironment in turn and further promote the excessive proliferation of dominant microbes in dysbiosis. As the product of interdisciplinary development of materials science, stomatology, and biomedical engineering, oral biomaterials are playing an increasingly important role in regulating the balance of the oral microbiome and treating oral diseases. In this perspective, we discuss the mechanisms underlying the pathogenesis of oral microbiota dysbiosis and introduce emerging materials focusing on oral microbiota dysbiosis in recent years, including inorganic materials, organic materials, and some biomolecules. In addition, the limitations of the current study and possible research trends are also summarized. It is hoped that this review can provide reference and enlightenment for subsequent research on effective treatment strategies for diseases related to oral microbiota dysbiosis.

Cellulosic biofilm formation of Komagataeibacter in kombucha at oil-water interfaces

Bacteria forming biofilms at oil-water interfaces have diverse metabolism, they use hydrocarbons as a carbon and energy source. Kombucha is a fermented drink obtained from a complex symbiotic culture of bacteria and yeast, where acetic acid bacteria present in kombucha use sugars as a carbon source to produce cellulosic biofilms. We hypothesize that Komagataeibacteraceae in kombucha can adsorb to and use hydrocarbons as the sole energy source to produce cellulosic biofilms. Hence we characterized a kombucha culture, studied bacterial adsorption and cellulosic biofilm formation of kombucha at the n-decane or mineral oil-kombucha suspension interface. The cellulosic biofilms were imaged using fluorescence microscopy and cryo-scanning electron microscopy, and their time-dependent rheology was measured.

Komagataeibacter, the dominant bacterial genus in the kombucha culture, produced cellulosic biofilms with reduced cellulose biomass yield at the oil-kombucha suspension interfaces compared to at the air-kombucha suspension interface. The presence of biosurfactants in the supernatant secreted by the kombucha microbes led to a larger and faster decrease in the interfacial tension on both oil types, leading to the formation of stable and elastic biofilm membranes. The difference in interfacial tension reduction was insignificant already after 2 h of biofilm formation at the mineral oil-kombucha suspension interface compared to kombucha microbes resuspended without biosurfactants but persisted for longer than 24 h in contact with n-decane. We also demonstrate that Komagataeibacter in kombucha can produce elastic cellulosic biofilms using hydrocarbons from the oil interface as the sole source of carbon and energy. Thus Komagataeibacter and kombucha shows the potential of this system for producing valued bacterial cellulose through remediation of hydrocarbon waste.

Sequence Does Not Matter: The Biomedical Applications of DNA-Based Coatings and Cores

Biomedical applications of DNA are diverse but are usually associated with specific recognition of target nucleotide sequences or proteins and with gene delivery for therapeutic or biotechnological purposes. However, other aspects of DNA functionalities, like its nontoxicity, biodegradability, polyelectrolyte nature, stability, thermo-responsivity and charge transfer ability that are rather independent of its sequence, have recently become highly appreciated in material science and biomedicine. Whereas the latest achievements in structural DNA nanotechnology associated with DNA sequence recognition and Watson–Crick base pairing between complementary nucleotides are regularly reviewed, the recent uses of DNA as a raw material in biomedicine have not been summarized. This review paper describes the main biomedical applications of DNA that do not involve any synthesis or extraction of oligo- or polynucleotides with specified sequences. These sequence-independent applications currently include some types of drug delivery systems, biocompatible coatings, fire retardant and antimicrobial coatings and biosensors. The reinforcement of DNA properties by DNA complexation with nanoparticles is also described as a field of further research.

DNA Polyelectrolyte Multilayer Coatings Are Antifouling and Promote Mammalian Cell Adhesion

The ability of bacteria to adhere to and form biofilms on implant surfaces is the primary cause of implant failure. Implant-associated infections are difficult to treat, as the biofilm mode of growth protects microorganisms from the host’s immune response and antibiotics. Therefore, modifications of implant surfaces that can prevent or delay bacterial adhesion and biofilm formation are highly desired. In addition, the attachment and spreading of bone cells are required for successful tissue integration in orthopedic and dental applications. We propose that polyanionic DNA with a negatively charged phosphate backbone could provide a dual function to repel bacterial adhesion and support host tissue cell attachment. To this end, we developed polyelectrolyte multilayer coatings using chitosan (CS) and DNA on biomaterial surfaces via a layer-by-layer technique. The assembly of these coatings was characterized. Further, we evaluated staphylococcal adhesion and biofilm growth on the coatings as well as cytotoxicity for osteoblast-like cells (SaOS-2 cells), and we correlated these to the layer structure. The CS-DNA multilayer coatings impaired the biofilm formation of Staphylococcus by ~90% on both PMMA and titanium surfaces. The presence of cationic CS as the top layer did not hinder the bacteria-repelling property of the DNA in the coating. The CS-DNA multilayer coatings demonstrated no cytotoxic effect on SaOS-2 cells. Thus, DNA polyelectrolyte multilayer coatings could reduce infection risk while promoting host tissue cell attachment on medical implants.

Anti-fouling poly adenine coating combined with highly specific CD20 epitope mimetic peptide for rituximab detection in clinical patients' plasma

In this study, a high-performance anti-fouling coating based on poly adenine (polyA_n) as well as a highly specific cluster of differentiation 20 (CD20) epitope mimetic peptide (CN14) were employed to synergistically construct a facile biosensor for the rapid and sensitive determination of rituximab in lymphoma patients' plasma. The well-designed and optimized polyA_n coating displayed excellent stability, hydrophilicity, thanks to its intrinsic affinity with gold surface and thoroughly exposed hydrophilic phosphate groups. Moreover, the proposed strategy avoids the necessity to modify binding groups (e.g. thiol), making it more facile, repeatable and efficient. When dealing with complex clinical plasma samples, the polyA_n coating demonstrated better anti-fouling performance and lower background signal in comparison with mercaptan and bovine serum albumin coatings. The dissociation constant (~60 nM) between CN14 and rituximab was measured by microscale thermophoresis and their binding mechanism was further explained using computer simulation. The constructed GE/CN14/polyA₂₀ biosensor displayed satisfactory performance with detection limit of 35.26 ng/mL. Finally, the proposed biosensor was successfully applied for rapidly determining rituximab in lymphoma patients' plasma, and exhibited comparable accuracy to the commercial ELISA, but has advantages including a shorter detection time, wider detection range and lower cost. It's worth noting that the anti-fouling polyA_n coating can be tailored according to the surface property of sensing interface and can be easily expanded to other gold electrode related biosensors.