1
|
Study on the Mechanism of the Reversible Color Change of Polyacrylic Acid Modified Gold Nanoparticles Responding to pH. MATERIALS 2021; 14:ma14133679. [PMID: 34279250 PMCID: PMC8269886 DOI: 10.3390/ma14133679] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/07/2021] [Revised: 06/06/2021] [Accepted: 06/24/2021] [Indexed: 11/29/2022]
Abstract
In view of various explanations regarding the pH response of the nanocomposite of gold nanoparticles (AuNPs) modified with polyacrylic acid (PAA) molecules in reported literature, in this work, AuNPs with a size of 20 nm saturatedly loaded with PAA molecules (AuNPs-PAAs) were used to investigate the following aspects of this issue. We investigated the effects of pH on the stability of AuNPs-PAAs in the presence of salt, CTAB, poly (sodium styrenesulfonate) (PSS), ethanol, and free PAA, respectively. Common techniques were undertaken to evaluate the stability, including UV-Vis spectroscopy, Zeta potential analysis, and TEM. The results show that AuNPs-PAAs could respond to pH variations, having a reversible aggregation-to-disaggregation, accompanying their Zeta potential change. The proposed corresponding mechanism was that this reversible change was attributes to the net charge variation of AuNPs-PAAs induced by a reversible protonation-to-deprotonation of PAA rather than the conformational change. It was found that salt, CTAB, PSS, and free PAA could strengthen the dispersity of AuNPs-PAAs, even though their absolute Zeta potential values were decreased to small values or dropped to nearly zero. This abnormal phenomenon was explained by solvation. It was also found that AuNPs-PAAs have an opposite pH response in aqueous and ethanol solutions, justifying the solvation effect. All these results revealed the conformational stability of PAAs immobilized on AuNPs. The methods and the findings of this investigation give some new insights to understand the pH-response of AuNPs-PAAs composites and the design of AuNPs-PAAs-based functional sensors.
Collapse
|
2
|
Gupta N, Kozlovskaya V, Dolmat M, Kharlampieva E. Shape Recovery of Spherical Hydrogen-Bonded Multilayer Capsules after Osmotically Induced Deformation. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:10910-10919. [PMID: 31356750 DOI: 10.1021/acs.langmuir.9b01795] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The mechanical properties of microparticles intended for in vivo applications as drug delivery vehicles are among important parameters that influence their circulation in the blood and govern particle biodistribution. We report on the synthesis of soft but mechanically robust spherical capsules via a hydrogen-bonded multilayer assembly of (poly(N-vinylpyrrolidone), Mw = 10 000 g mol-1) with (poly(methacrylic acid) Mw = 100 000 g mol-1)) (PVPON/PMAA)n in methanol using 4 μm nonporous silica microparticles as sacrificial templates, where n = 5 and 10 and represents the bilayer number. The mechanical properties of (PVPON/PMAA)n spherical capsules were assessed using the osmotic pressure difference method and resulted in an elasticity modulus of 97 ± 8 MPa, which is in the range of Young's modulus for elastomeric networks. We also found that hydrogen-bonded (PVPON/PMAA)10 capsules demonstrated almost complete recovery from a concave buckled inward shape induced by the osmotic pressure difference from the addition of polystyrene sulfonate (PSS) to the capsule solution to their initial spherical shape within 12 h after the PSS solution was rinsed off. The permeability measurements through the capsule shell using fluorescently labeled dextran molecular probes revealed that the average mesh size of the hydrogen-bonded network assembled in methanol is in the range of 3 to 9 nm and is not permeable to FITC-dextran with a molecular weight of >40 000 g mol-1. Our study shows that physically cross-linked polyelectrolyte multilayer capsules are capable of withstanding large deformations, which is essential to the development of adaptable particles for controlled delivery.
Collapse
|
3
|
Boas M, Vasilyev G, Vilensky R, Cohen Y, Zussman E. Structure and Rheology of Polyelectrolyte Complexes in the Presence of a Hydrogen-Bonded Co-Solvent. Polymers (Basel) 2019; 11:polym11061053. [PMID: 31212925 PMCID: PMC6630629 DOI: 10.3390/polym11061053] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2019] [Revised: 06/06/2019] [Accepted: 06/12/2019] [Indexed: 11/25/2022] Open
Abstract
Intermolecular interactions as well as macromolecular conformation affect the rheological and microstructural properties of polyelectrolyte complexes (PECs) solutions. The properties of semi-dilute solutions of weakly charged PECs can be controlled by the degree of ionization and solvent composition. In this work, we examined the effect of ethanol as a co-solvent on PECs composed of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) at low pH. The aqueous PECs solution was turbid, indicating formation of large aggregates, whereas PECs solution in water/ethanol (60:40 w/w) was transparent, implying no aggregation, and demonstrated higher relative viscosity than the aqueous solution, implying pronounced network formation. Imaging PECs solution by transmission electron microscopy (TEM) demonstrated aggregation, whereas the solution prepared with the mixed solvent revealed almost no phase contrast. Small-angle X-ray scattering (SAXS) of PECs in the aqueous solution indicated the presence of aggregates, while PECs in mixed solvent demonstrated a swelled macromolecular conformation with diminished aggregation. PECs with no ionic interactions in the mixed solvent assumes a homogenous network structure, which enables PECs solution processing by electrospinning.
Collapse
Affiliation(s)
- Mor Boas
- NanoEngineering Group, Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel.
| | - Gleb Vasilyev
- NanoEngineering Group, Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel.
| | - Rita Vilensky
- NanoEngineering Group, Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel.
| | - Yachin Cohen
- Faculty of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel.
| | - Eyal Zussman
- NanoEngineering Group, Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel.
| |
Collapse
|
4
|
|
5
|
Morales D, Podolsky I, Mailen RW, Shay T, Dickey MD, Velev OD. Ionoprinted Multi-Responsive Hydrogel Actuators. MICROMACHINES 2016; 7:E98. [PMID: 30404273 PMCID: PMC6190308 DOI: 10.3390/mi7060098] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/27/2016] [Revised: 05/16/2016] [Accepted: 05/17/2016] [Indexed: 11/23/2022]
Abstract
We report multi-responsive and double-folding bilayer hydrogel sheet actuators, whose directional bending response is tuned by modulating the solvent quality and temperature and where locally crosslinked regions, induced by ionoprinting, enable the actuators to invert their bending axis. The sheets are made multi-responsive by combining two stimuli responsive gels that incur opposing and complementary swelling and shrinking responses to the same stimulus. The lower critical solution temperature (LCST) can be tuned to specific temperatures depending on the EtOH concentration, enabling the actuators to change direction isothermally. Higher EtOH concentrations cause upper critical solution temperature (UCST) behavior in the poly(N-isopropylacrylamide) (pNIPAAm) gel networks, which can induce an amplifying effect during bilayer bending. External ionoprints reliably and repeatedly invert the gel bilayer bending axis between water and EtOH. Placing the ionoprint at the gel/gel interface can lead to opposite shape conformations, but with no clear trend in the bending behavior. We hypothesize that this is due to the ionoprint passing through the neutral axis of the bilayer during shrinking in hot water. Finally, we demonstrate the ability of the actuators to achieve shapes unique to the specific external conditions towards developing more responsive and adaptive soft actuator devices.
Collapse
Affiliation(s)
- Daniel Morales
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| | - Igor Podolsky
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| | - Russell W Mailen
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| | - Timothy Shay
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| | - Michael D Dickey
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| | - Orlin D Velev
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA.
| |
Collapse
|
6
|
Sappidi P, Natarajan U. Polyelectrolyte conformational transition in aqueous solvent mixture influenced by hydrophobic interactions and hydrogen bonding effects: PAA-water-ethanol. J Mol Graph Model 2015; 64:60-74. [PMID: 26803232 DOI: 10.1016/j.jmgm.2015.12.004] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2015] [Revised: 11/18/2015] [Accepted: 12/18/2015] [Indexed: 10/22/2022]
Abstract
Molecular dynamics simulations of poly(acrylic acid) PAA chain in water-ethanol mixture were performed for un-ionized and ionized cases at different degree-of-ionization 0%, 80% and 100% of PAA chain by Na(+) counter-ions and co-solvent (ethanol) concentration in the range 0-90vol% ethanol. Aspects of structure and dynamics were investigated via atom pair correlation functions, number and relaxation of hydrogen bonds, nearest-neighbor coordination numbers, and dihedral angle distribution function for back-bone and side-groups of the chain. With increase in ethanol concentration, chain swelling is observed for un-ionized chain (f=0) and on the contrary chain shrinkage is observed for partially and fully ionized cases (i.e., f=0.8 and 1). For un-ionized PAA, with increase in ethanol fraction ϕeth the number of PAA-ethanol hydrogen bonds increases while PAA-water decreases. Increase in ϕeth leads to PAA chain expansion for un-ionized case and chain shrinkage for ionized case, in agreement with experimental observations on this system. For ionized-PAA case, chain shrinkage is found to be influenced by intermolecular hydrogen bonding with water as well as ethanol. The localization of ethanol molecules near the un-ionized PAA backbone at higher levels of ethanol is facilitated by a displacement of water molecules indicating presence of specific ethanol hydration shell, as confirmed by results of the RDF curves and coordination number calculations. This behavior, controlled by hydrogen bonding provides a significant contribution to such a conformational transition behavior of the polyelectrolyte chain. The interactions between counter-ions and charges on the PAA chain also influence chain collapse. The underlying origins of polyelectrolyte chain collapse in water-alcohol mixtures are brought out for the first time via explicit MD simulations by this study.
Collapse
Affiliation(s)
- Praveenkumar Sappidi
- Macromolecular Modeling and Simulation Lab, Department of Chemical Engineering, Indian Institute of Technology (IIT) Madras, Chennai 600036, India
| | - Upendra Natarajan
- Macromolecular Modeling and Simulation Lab, Department of Chemical Engineering, Indian Institute of Technology (IIT) Madras, Chennai 600036, India.
| |
Collapse
|
7
|
Tisserant JN, Reissner PA, Beyer H, Fedoryshyn Y, Stemmer A. Water-Mediated Assembly of Gold Nanoparticles into Aligned One-Dimensional Superstructures. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:7220-7. [PMID: 26072942 DOI: 10.1021/acs.langmuir.5b01135] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
This Article shows that water in ethanol colloids of gold nanoparticles enhances the formation of linear clusters and, more important for applications in electronics, determines their assembly on surfaces. We show by dynamic light scattering that ethanol colloids contain mainly monomers and dimers and that wormlike superstructures are mostly absent, despite UV-vis evidence of aggregation. Water added to the colloid as a cosolvent was found to enhance the number of clusters as well as their average size, confirming its role in linear self-assembly, on the scale of a few particles. Water adsorbed from the atmosphere during coating was also found to be a powerful lever to tune self-assembly on surfaces. By varying the relative humidity, a sharp transition from branched to linear superstructures was observed, showing the importance of water as a cosolvent in the formation of cluster superstructures. We show that one-dimensional superstructures may form due to long-range mobility of precursor clusters on wet surfaces, allowing their rearrangement. The understanding of the phenomenon allows us to statistically align both clusters and resulting superstructures on patterned substrates, opening the way to rapid screening in molecular electronics.
Collapse
Affiliation(s)
| | - Patrick A Reissner
- †Nanotechnology Group, ETH Zurich, Säumerstrasse 4, CH-8803 Rüschlikon, Switzerland
| | - Hannes Beyer
- †Nanotechnology Group, ETH Zurich, Säumerstrasse 4, CH-8803 Rüschlikon, Switzerland
| | - Yuriy Fedoryshyn
- ‡Institute of Electromagnetic Fields, ETH Zurich, Gloriastrasse 35, CH-8092 Zurich, Switzerland
| | - Andreas Stemmer
- †Nanotechnology Group, ETH Zurich, Säumerstrasse 4, CH-8803 Rüschlikon, Switzerland
| |
Collapse
|
8
|
Sappidi P, Natarajan U. Influence of hydrogen bonding on the structural transition of poly(methacrylic acid) chain in water–ethanol solution by molecular dynamics simulations. MOLECULAR SIMULATION 2014. [DOI: 10.1080/08927022.2014.992018] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
9
|
Wu C. Hydrogen bonding in stereoregular poly(methyl methacrylate)/poly(vinyl chloride) blends as studied by molecular dynamics simulations. MOLECULAR SIMULATION 2014. [DOI: 10.1080/08927022.2014.899695] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|