Iodomethane human health risk characterization

Natural Deep Eutectic Solvents as Absorbing Solution and Preparation Solvent of Perovskite Nanocrystals Simultaneously for CH3I Gas Visual Sensing

Methyl iodide (CH3I) gas as a toxic gas causes great harm to organisms due to its high volatility and high reactivity with biological nucleophiles. Unfortunately, the sensing and detection of CH3I gas are challenging because of the diffusive nature of the gases and its low concentrations in the environment. Herein, we have developed a fast, green, and sensitive CH3I gas visual sensing method based on the capture technology of toxic gases by natural deep eutectic solvents (NADESs) coupled to the halide rapid exchange capability of perovskite nanocrystals (PNCs). In this strategy, NADESs are used as an absorption solution to adsorb gaseous CH3I, while simultaneously exposing I- through the action of the nucleophilic reagent; then, CsPbBr3 PNCs were synthesized in NADESs and used as sensing material to achieve I- exchange. Benefiting from the capture and enrichment of CH3I gas, the sensitivity of the gas sensor was highly improved. The sensor exhibited the lowest detection limit (limits of detection) of 164.15 μmol/m3, below the minimum safe level for human inhalation, which is 200 μmol/m3. This breakthrough offers greater possibilities for the quantitative detection of CH3I gas.

Rapid production of the anaesthetic mepivacaine through continuous, portable technology

Local anaesthetics such as mepivacaine are key molecules in the medical sector, so ensuring their supply chain is crucial for every health care system. Rapid production of mepivacaine from readily available commercial reagents and (non-dry) solvents under safe conditions using portable, continuous apparatus could make an impactful difference in underdeveloped countries. In this work, we report a continuous platform for synthesising mepivacaine, one of the most widely used anaesthetics for minor surgeries. With a focus on sustainability, reaction efficiency and seamless implementation, this platform afforded the drug in 44% isolated yield following a concomitant distillation-crystallisation on a gram scale after N-functionalisation and amide coupling, with full recovery of the solvents and excess reagents. The use of flow chemistry as an enabling tool allowed the use of "forbidden" chemistry which is typically challenging for preparative and large scale reactions in batch mode. Overall, this continuous platform presents a promising and sustainable approach that has the potential to meet the demands of the healthcare industry.

An experimental, computational, and uncertainty analysis study of the rates of iodoalkane trapping by DABCO in solution phase organic media

NMR spectroscopy was used to measure the rates of the first and second substitution reactions between iodoalkane (R = Me, 1-butyl) and DABCO in methanol, acetonitrile and DMSO. Most of the reactions were recorded at three different temperatures, which permitted calculation of the activation parameters from Eyring and Arrhenius plots. Additionally, the reaction rate and heat of reaction for 1-iodobutane + DABCO in acetonitrile and DMSO were also measured using calorimetry. To help interpret experimental results, ab initio calculations were performed on the reactant, product, and transition state entities to understand structures, reaction enthalpies and activation parameters. Markov chain Monte Carlo statistical sampling was used to determine a distribution of kinetic rates with respect to the uncertainties in measured concentrations and correlations between parameters imposed by a kinetics model. The reactions with 1-iodobutane are found to be slower in all cases compared to reactions under similar conditions for iodomethane. This is due to steric crowding around the reaction centre for the larger butyl group compared to methyl which results in a larger activation energy for the reaction.

Rapid and efficient syntheses of tryptophans using a continuous-flow quaternization-substitution reaction of gramines with a chiral nucleophilic glycine equivalent

A continuous-flow quaternization reaction of gramines with MeI (<1 min) followed by a substitution reaction with a chiral nucleophilic glycine-derived Ni-complex (S)-2 (<1 min) has successfully been developed to afford the corresponding alkylated Ni-complexes 3 in good yields with excellent diastereoselectivity, based on the results of a one-pot quaternization-substitution reaction of gramines with (S)-2 in a batch process. The continuous-flow process allowed the safe and efficient scale-up synthesis of 3j (84% yield, 99% de, 540 g h^-1) to give 7-azatryptophan derivative (S)-4j readily by an acid-catalyzed hydrolysis reaction followed by protection with an Fmoc group. The present method for the rapid and efficient syntheses of enantiopure unnatural tryptophan derivatives from various gramines and (S)-2 will be useful to further promote peptide and protein drug discovery and development research.

Thyroid homeostasis in B6C3F1 mice upon sub-chronic exposure to trifluoroiodomethane (CF3I)

Trifluoroiodomethane (CF₃I) is a fire suppressant gas with potential for use in low global-warming refrigerant blends. Data from studies in rats suggest that the most sensitive health effect of CF₃I is thyroid hormone perturbation, but the rat is a particularly sensitive species for disruption of thyroid homeostasis. Mice appear to be less sensitive than rats but still a conservative model with respect to humans. The purpose of this study was to test tolerance and thyroid response to CF₃I in B6C3F1 male mice. Male mice were exposed to CF₃I for 6 h per day, for 28 days, via whole body exposure at concentrations of 2500, 5000 and 10,000 ppm. A 16-day recovery period was included to evaluate reversibility. No adverse clinical signs were observed throughout the study, and body weights were unaffected by exposure. CF₃I exposure had no effect on thyroid histology. An increase in relative thyroid weight was observed at 10,000 ppm on day 28 but not in a separate group of animals evaluated on day 29, and thyroid weight was not different from controls at 44 days. Slight and sporadic changes in serum triiodothyronine, thyroxine, and thyroid-stimulating hormone were observed but did not follow a consistent pattern with respect to timing, dose, or direction. Overall, exposure at up to 10,000 ppm (1.0%) of CF₃I gas for 28 days produced no overt general toxicity and only transient, recoverable effects on thyroid weight and hormones at certain concentrations. On the basis of the effect of CF₃I exposure on the thyroid, including evaluation of thyroid histopathology, the no observed adverse effect level for this study is 10,000 ppm. Considering the apparently greater toxicity reported in prior studies in male rats, our data suggest a species difference between rats and mice in terms of susceptibility to CF₃I-induced thyroid hormone perturbation.

Development of an in vitro approach to point-of-contact inhalation toxicity testing of volatile compounds, using organotypic culture and air-liquid interface exposure

In vitro chemical risk assessment using human cells is emerging as an alternative to in vivo animal testing with reduced costs, fewer animal welfare concerns, and the possibility of greater human health relevance. In vitro inhalation toxicity testing of volatile compounds poses particular challenges. Here we report our efforts to establish a testing protocol in our own lab using the EpiAirway bronchial epithelium cell culture model and the Vitrocell 12/12 system for air-liquid interface (ALI) exposures. For purposes of method development, we used methyl iodide (MeI) as a test compound. We examined viability, cytotoxicity, and epithelial integrity responses. Dose-dependent, reproducible responses were observed with all assays. EpiAirway and BEAS-2B cytotoxicity responses to acute exposure were roughly similar, but EpiAirway was more resistant than BEAS-2B by the viability measurement, suggesting a proliferative response at low MeI concentrations. If wells were sealed to prevent evaporation, in-solution MeI concentration-response could be used to predict the response to MeI vapor within 2-fold by converting from the media- to the air-concentration at equilibrium using the blood:air partition coefficient for MeI. The long-term stability of EpiAirway cultures enabled repeated exposures over a 5-d period, which produced responses at lower concentrations than did acute exposure.

N-Methylation and Trideuteromethylation of Amines via Magnesium-Catalyzed Reduction of Cyclic and Linear Carbamates

A new reduction of carbamates to N-methyl amines is presented. The magnesium-catalyzed reduction reaction allows the conversion of cyclic and linear carbamates, including N-Boc protected amines, into the corresponding N-methyl amines and amino alcohols which are of significant interest due to their presence in many biologically active molecules. Furthermore, the reduction can be extended to the formation of N-trideuteromethyl labeled amines.

Development and Application of a Recyclable High-Load Magnetic Co/C Hybrid ROMP-Derived Benzenesulfonyl Chloride Reagent and Utility of Corresponding Analogues

The development and application of high-load, recyclable magnetic Co/C hybrid ROMP-derived benzenesulfonyl chloride and analogues is reported. The regeneration and utility of these reagents in the methylation/alkylation of various carboxylic acids is demonstrated via efficient retrieval of the magnetic reagent with a neodymium magnet. Additional reactions employing the analogue sulfonic acid and in situ generated magnetic benzenesulfonyl azide are also reported.

Aerobic Copper-Catalyzed O-Methylation with Methylboronic Acid

The oxidative coupling of alkylboronic acids with oxygen nucleophiles offers a strategy for replacing toxic, electrophilic alkylating reagents. Although the Chan-Lam reaction has been widely applied in the arylation of heteroatom nucleophiles, O-alkylation with boronic acids is rare. We report a Cu-catalyzed nondecarboxylative methylation of carboxylic acids with methylboronic acid that proceeds in air with no additional oxidant. An isotope-labeling study supports an oxidative cross-coupling mechanism, in analogy to that proposed for Chan-Lam arylation.

Advances in Inhalation Dosimetry Models and Methods for Occupational Risk Assessment and Exposure Limit Derivation

The purpose of this article is to provide an overview and practical guide to occupational health professionals concerning the derivation and use of dose estimates in risk assessment for development of occupational exposure limits (OELs) for inhaled substances. Dosimetry is the study and practice of measuring or estimating the internal dose of a substance in individuals or a population. Dosimetry thus provides an essential link to understanding the relationship between an external exposure and a biological response. Use of dosimetry principles and tools can improve the accuracy of risk assessment, and reduce the uncertainty, by providing reliable estimates of the internal dose at the target tissue. This is accomplished through specific measurement data or predictive models, when available, or the use of basic dosimetry principles for broad classes of materials. Accurate dose estimation is essential not only for dose-response assessment, but also for interspecies extrapolation and for risk characterization at given exposures. Inhalation dosimetry is the focus of this paper since it is a major route of exposure in the workplace. Practical examples of dose estimation and OEL derivation are provided for inhaled gases and particulates.