Design of a RADA16-based self-assembling peptide nanofiber scaffold for biomedical applications

Regenerative endodontic therapy: From laboratory bench to clinical practice

BACKGROUND

Maintaining the vitality and functionality of dental pulp is paramount for tooth integrity, longevity, and homeostasis. Aiming to treat irreversible pulpitis and necrosis, there has been a paradigm shift from conventional root canal treatment towards regenerative endodontic therapy.

AIM OF REVIEW

This extensive and multipart review presents crucial laboratory and practical issues related to pulp-dentin complex regeneration aimed towards advancing clinical translation of regenerative endodontic therapy and enhancing human life quality.

KEY SCIENTIFIC CONCEPTS OF REVIEW

In this multipart review paper, we first present a panorama of emerging potential tissue engineering strategies for pulp-dentin complex regeneration from cell transplantation and cell homing perspectives, emphasizing the critical regenerative components of stem cells, biomaterials, and conducive microenvironments. Then, this review provides details about current clinically practiced pulp regenerative/reparative approaches, including direct pulp capping and root revascularization, with a specific focus on the remaining hurdles and bright prospects in developing such therapies. Next, special attention was devoted to discussing the innovative biomimetic perspectives opened in establishing functional tissues by employing exosomes and cell aggregates, which will benefit the clinical translation of dental pulp engineering protocols. Finally, we summarize careful consideration that should be given to basic research and clinical applications of regenerative endodontics. In particular, this review article highlights significant challenges associated with residual infection and inflammation and identifies future insightful directions in creating antibacterial and immunomodulatory microenvironments so that clinicians and researchers can comprehensively understand crucial clinical aspects of regenerative endodontic procedures.

Self-assembling peptide hydrogel scaffold integrating stem cell-derived exosomes for infected bone defects

Infected bone defect (IBD) is a great challenge in orthopedics, which involves in bone loss and infection. Here, a self-assembling hydrogel scaffold (named AMP-RAD/EXO), integrating antimicrobial peptides(AMPs), RADA16 and BMSCs exosomes with an innovative strategy, is developed and applied in IBD treatment for sustained antimicrobial ability, accelerating osteoblasts proliferation and promoting bone regeneration. AMPs present an excellent ability to inhibit infection, RADA16 is a self-assembling peptide hydrogel for AMPs delivery, and BMSCs exosomes can promote the bone regeneration. The prepared AMP-RAD/EXO exhibited a polyporous 3D structure for imbibition of BMSCs exosomes and migration of osteoblasts. In vitro studies indicate AMP-RAD/EXO can inhibit the growth of Staphylococcus aureus, accelerate the proliferation and migration of BMSCs. More importantly, in vivo results also prove that AMP-RAD/EXO exhibit an excellent effect on IBD treatment. Thus, the prepared AMP-RAD/EXO provides a multifunctional scaffold concept for bone tissue engineering technology.

Peptide-Based Hydrogel for Nanosystems Encapsulation: the Next Generation of Localized Delivery Systems for the Treatment of Intestinal Inflammations

Conventional therapies for inflammatory bowel diseases are mainly based on systemic treatments which cause side effects and toxicity over long-term administration. Nanoparticles appear as a valid alternative to allow a preferential accumulation in inflamed tissues following oral administration while reducing systemic drug exposure. To increase their residence time in the inflamed intestine, the nanoparticles are here associated with a hydrogel matrix. A bioadhesive peptide-based hydrogel is mixed with nanoemulsions, creating a hybrid lipid-polymer nanocomposite. Mucopenetrating nanoemulsions of 100 nm are embedded in a scaffold constituted of the self-assembling peptide hydrogel product PuraStat. The nanocomposite is fully characterized to study the impact of lipid particles in the hydrogel structure. Rheological measurements and circular dichroism analyses are performed to investigate the system's microstructure and physical properties. Biodistribution studies demonstrate that the nanocomposite acts as a depot in the stomach and facilitates the slow release of the nanoemulsions in the intestine. Efficacy studies upon oral administration of the drug-loaded system show the improvement of the disease score in a mouse model of intestinal inflammation.

Transforming growth factor-β1-loaded RADA-16 hydrogel scaffold for effective cartilage regeneration

Cartilage repair remains a major challenge in clinical trials. These current cartilage repair materials can not effectively promote chondrocyte generation, limiting their practical application in cartilage repair. In this work, we develop an implantable scaffold of RADA-16 peptide hydrogel incorporated with TGF-β1 to provide a microenvironment for stem cell-directed differentiation and chondrocyte adhesion growth. The longest release of growth factor TGF-β1 release can reach up to 600 h under physiological conditions. TGF-β1/RADA-16 hydrogel was demonstrated to be a lamellar porous structure. Based on the cell culture with hBMSCs, TGF-β1/RADA-16 hydrogel showed excellent ability to promote cell proliferation, directed differentiation into chondrocytes, and functional protein secretion. Within 14 days, 80% of hBMSCs were observed to be directed to differentiate into vigorous chondrocytes in the co-culture of TGF-β1/RADA-16 hydrogels with hBMSCs. Specifically, these newly generated chondrocytes can secrete and accumulate large amounts of collagen II within 28 days, which can effectively promote the formation of cartilage tissue. Finally, the exploration of RADA-16 hydrogel-based scaffolds incorporated with TGF-β1 bioactive species would further greatly promote the practical clinical trials of cartilage remediation, which might have excellent potential to promote cartilage regeneration in areas of cartilage damage.

Osteopontine-derived functional fragments coupled to RADA16 self-assembled peptide hydrogels promotes bone and vascular regeneration in vivo

Biomaterial scaffolds have been widely used in tissue engineering. A functionalized self-assembled peptide scaffold named RADA16-OPD was designed by linking the short functional motif of osteopontine (OPN)-derived functional fragments SVVYGLR (OPD) to the C-terminus of the self-assembled peptide RADA16. Atomic force microscopy (AFM) was used to analyze the self-assembling peptide's structural composition. The live/dead staining results showed that RADA16-OPD is not toxic to rASC. After creating a rat skull defect model artificially, micro-CT results revealed that the defect area treated with RADA16-OPD hydrogel had higher bone volume/total volume (BV/TV), a higher trabecular number (TB.N.), and higher bone density (BMD) at different treatment time points. Histological evaluation found that there was more new bone and mature collagen production in the RADA16-OPD group. Meanwhile, the RADA16-OPD group had higher expression of alkaline phosphatase (ALP) and osteocalcin (OCN) than the other two groups. Additionally, immunofluorescence revealed that the RADA16-OPD group had higher levels of platelet/endothelial cell adhesion molecule 1 (CD31) expression than the other two groups. It demonstrated the potential for clinical use of the RADA16-OPD peptide scaffold by promoting bone regeneration and blood vessel development in vivo.

Designed modular protein hydrogels for biofabrication

Designing proteins that fold and assemble over different length scales provides a way to tailor the mechanical properties and biological performance of hydrogels. In this study, we designed modular proteins that self-assemble into fibrillar networks and, as a result, form hydrogel materials with novel properties. We incorporated distinct functionalities by connecting separate self-assembling (A block) and cell-binding (B block) domains into single macromolecules. The number of self-assembling domains affects the rigidity of the fibers and the final storage modulus G' of the materials. The mechanical properties of the hydrogels could be tuned over a broad range (G' = 0.1 - 10 kPa), making them suitable for the cultivation and differentiation of multiple cell types, including cortical neurons and human mesenchymal stem cells. Moreover, we confirmed the bioavailability of cell attachment domains in the hydrogels that can be further tailored for specific cell types or other biological applications. Finally, we demonstrate the versatility of the designed proteins for application in biofabrication as 3D scaffolds that support cell growth and guide their function. STATEMENT OF SIGNIFICANCE: Designed proteins that enable the decoupling of biophysical and biochemical properties within the final material could enable modular biomaterial engineering. In this context, we present a designed modular protein platform that integrates self-assembling domains (A blocks) and cell-binding domains (B blocks) within a single biopolymer. The linking of assembly domains and cell-binding domains this way provided independent tuning of mechanical properties and inclusion of biofunctional domains. We demonstrate the use of this platform for biofabrication, including neural cell culture and 3D printing of scaffolds for mesenchymal stem cell culture and differentiation. Overall, this work highlights how informed design of biopolymer sequences can enable the modular design of protein-based hydrogels with independently tunable biophysical and biochemical properties.

Experimental Study on Rapid Hemostasis Using Peptide Hydrogels

Uncontrolled hemorrhaging resulting from trauma, surgery, and disease-associated or drug-induced blood disorders can cause significant morbidities and mortalities in civilian and military populations. Self-assembling peptide nanofibers are particularly attractive due to their rapid and efficient hemostasis, biocompatibility, and wound-healing properties. In this study, we designed two types of 12-residue peptides by using a strong fishnet-like peptide sequence and a pro-cell adhesion sequence (Arg-Gly-Asp, RGD). The peptides are HN2-X-Ser-Phe-Cys-Phe-Lys-Phe-Glu-X-Arg-Gly-Asp-OH (where X is Pro or Tyr), which dissolve in deionized (DI) water and form stable and transparent functional hydrogels. Transmission electron microscopy and scanning electron microscopy demonstrated that the two peptides self-assemble into nanowebs and nanofibers, forming a fishnet-like and three-dimensional network structure. Circular dichroism and Fourier transform infrared spectroscopy analysis demonstrated that the self-assembled peptides mainly adopt a β-sheet structure with β-turn and α-helix as auxiliary assembly growth. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and SEM analysis showed that the cell survival rates were very good, delivering an obvious promotion of cell proliferation of fibroblasts and hepatocytes. Importantly, in vivo hemostasis delivered that the self-assembled peptide nanowebs and nanofibers had a good hemostatic effect on rat saphenous vein and liver bleeding, achieving 38 s faster hemostasis, which was better than commercial "Instantaneous" hemostatic powder. Accoupling the fast hemostasis and effective promotion of liver defect rapid repair, the peptide self-assembly strategy offers a clinically promising treatment option for life-threatening liver bleeding and serves as a renewed impetus for the development of peptide hydrogels as effective hemostatic agents.

RADA-16-based Self-assembled Peptide Nanofiber Scaffolds Loaded with TGF-β1 Enhance the Chondrogenic Differentiation Potential of BMSCs In vitro

OBJECTIVE

At present, cartilage repair does not offer ideal efficacy. Fortunately, recent studies have claimed that RADA-16 peptide is an attractive therapeutic strategy for repairing cartilage defects. Therefore, this study tried to explore the effect of RADA-16 loaded with transforming growth factor-beta (TGF-β) 1 on cartilage differentiation of bone marrow mesenchymal stem cells (BMSCs).

METHODS

First, the RADA-16 peptide was synthesized by solid phase peptide, and a well-defined hydrogel was formed by supramolecular peptide self-assembly. Then, TGF-β1 (loading concentration of 10 ng/mL) was loaded into RADA-16, with scanning electron microscopy to observe the morphology of the TGF-β1/RADA-16 hydrogel and detect its related properties. Next, BMSCs were isolated from bone marrow samples and identified. TGF-β1/RADA-16 was co-cultured with L929, BMSCs, and C28/I2 cells, respectively, and the survival and proliferation ability of the cells was determined by live/dead cell staining and MTT assay. Chondrogenic differentiation and sGAG production of BMSCs were determined by Alcian blue staining and Blyscan assay, the expression of cartilage-associated genes by qRT-PCR, and the levels of inflammatory factors by ELISA. As for mechanism investigation, the Smad and ERK/MAPK signaling pathways were detected by western blot.

RESULTS

RADA-16 hydrogel exhibited a well-distributed and interconnected porous surface structure, with a loading rate of 91.9% for TGF-β1. The TGF-β1/RADA-16 hydrogel had good release and degradation properties, and had no negative effect on the survival and proliferation ability of BMSCs, L929, and C28/I2 cells. Importantly, TGF-β1/RADA-16 hydrogel significantly accelerated chondrogenic differentiation and sGAG generation in BMSCs, and decreased pro-inflammatory factor production. In addition, the hydrogel also significantly activated the Smad and ERK/MAPK pathways of BMSCs.

CONCLUSION

RADA-16 loaded with TGF-β1 has good biological properties and can enhance the chondrogenic differentiation ability of BMSCs.

Nanobiomaterials: exploring mechanistic roles in combating microbial infections and cancer

The initiation of the "nanotechnology era" within the past decade has been prominently marked by advancements in biomaterials. This intersection has opened up numerous possibilities for enhancing the detection, diagnosis, and treatment of various illnesses by leveraging the synergy between biomaterials and nanotechnology. The term "nano biomaterials" referring to biomaterials featuring constituent or surface feature sizes below 100 nm, presents a realm of extraordinary materials endowed with unique structures and properties. Beyond addressing common biomedical challenges, these nano biomaterials contribute unprecedented insights and principles that enrich our understanding of biology, medicine, and materials science. A critical evaluation of recent technological progress in employing biomaterials in medicine is essential, along with an exploration of potential future trends. Nanotechnology breakthroughs have yielded novel surfaces, materials, and configurations with notable applications in the biomedical domain. The integration of nanotechnology has already begun to enhance traditional biomedical practices across diverse fields such as tissue engineering, intelligent systems, the utilization of nanocomposites in implant design, controlled release systems, biosensors, and more. This mini review encapsulates insights into biomaterials, encompassing their types, synthesis methods, and the roles of organic and inorganic nanoparticles, elucidating their mechanisms of action. Furthermore, the focus is squarely placed on nano biomaterials and their versatile applications, with a particular emphasis on their roles in anticancer and antimicrobial interventions. This review underscores the dynamic landscape of nanotechnology, envisioning a future where nano biomaterials play a pivotal role in advancing medical applications, particularly in combating cancer and microbial infections.

Evaluation of a Peptide Hydrogel as a Chondro-Instructive Three-Dimensional Microenvironment

Articular cartilage injuries are inherently irreversible, even with the advancement in current therapeutic options. Alternative approaches, such as the use of mesenchymal stem/stromal cells (MSCs) and tissue engineering techniques, have gained prominence. MSCs represent an ideal source of cells due to their low immunogenicity, paracrine activity, and ability to differentiate. Among biomaterials, self-assembling peptide hydrogels (SAPH) are interesting given their characteristics such as good biocompatibility and tunable properties. Herein we associate human adipose-derived stem cells (hASCs) with a commercial SAPH, Puramatrix™, to evaluate how this three-dimensional microenvironment affects cell behavior and its ability to undergo chondrogenic differentiation. We demonstrate that the Puramatrix™ hydrogel comprises a highly porous matrix permissible for hASC adhesion and in vitro expansion. The morphology and cell growth dynamics of hASCs were affected when cultured on the hydrogel but had minimal alteration in their immunophenotype. Interestingly, hASCs spontaneously formed cell aggregates throughout culturing. Analysis of glycosaminoglycan production and gene expression revealed a noteworthy and donor-dependent trend suggesting that Puramatrix™ hydrogel may have a natural capacity to support the chondrogenic differentiation of hASCs. Altogether, the results provide a more comprehensive understanding of the potential applications and limitations of the Puramatrix™ hydrogel in developing functional cartilage tissue constructs.

Application of 3D- printed hydrogels in wound healing and regenerative medicine

Hydrogels are three-dimensional polymer networks with hydrophilic properties. The modifiable properties of hydrogels and the structure resembling living tissue allow their versatile application. Therefore, increasing attention is focused on the use of hydrogels as bioinks for three-dimensional (3D) printing in tissue engineering. Bioprinting involves the fabrication of complex structures from several types of materials, cells, and bioactive compounds. Stem cells (SC), such as mesenchymal stromal cells (MSCs) are frequently employed in 3D constructs. SCs have desirable biological properties such as the ability to differentiate into various types of tissue and high proliferative capacity. Encapsulating SCs in 3D hydrogel constructs enhances their reparative abilities and improves the likelihood of reaching target tissues. In addition, created constructs can simulate the tissue environment and mimic biological signals. Importantly, the immunogenicity of scaffolds is minimized through the use of patient-specific cells and the biocompatibility and biodegradability of the employed biopolymers. Regenerative medicine is taking advantage of the aforementioned capabilities in regenerating various tissues- muscle, bones, nerves, heart, skin, and cartilage.

Self-assembling RADA16 peptide hydrogel supports hemostasis, synechiae reduction, and wound healing in a sheep model of endoscopic nasal surgery

OBJECTIVES

Complications of endoscopic sinus/nasal turbinate surgery include postoperative hemorrhage, synechiae formation, and poor wound healing. Our primary objectives were to evaluate whether a topical hydrogel based on self-assembling RADA16 peptides: i) reduces bleeding and synechiae formation, and ii) supports wound healing, using a sheep nasal surgery model.

METHODS

Thirty sheep received endoscopic surgery-created bilateral nasal mucosal injuries on the middle turbinate/opposing septum. Injuries were randomly assigned RADA16, Gelatin-thrombin, or no treatment. Outcomes included intra-operative hemostasis, scar tissue/synechiae formation and wound healing at 2 weeks and the 6-week study terminus, and histopathology.

RESULTS

Intra-operative hemostasis time improved with RADA16 and Gelatin-thrombin versus Control wounds (139.7±56.2 s, 145.4±58.1 s, and 224.0±69.9 s, respectively; p < 0.0001 for both comparisons). Two-week synechiae scores (maximum 4 points) were similar in Controls (2.9±1.8 points) and Gelatin-thrombin (3.1±1.6 points) wounds (p > 0.05), but were reduced in RADA16 sites by 91% versus Controls and 92% versus Gelatin-thrombin treatment (0.3±0.6 points; p < 0.0001 for both comparisons). Six-week synechiae scores were similar in Control (1.1±1.7 points) and Gelatin-thrombin (1.7±2.0 points) wounds (p > 0.05), but reduced 100% in RADA16-treated wounds. Synechiae occurred in fewer RADA16-treated sites at 2 weeks (20%) versus Gelatin-thrombin (80%) and Controls (75%; p < 0.01) and at 6 weeks (0%, 50% and 35%, respectively; p < 0.01). RADA16 was associated with significantly lower 6-week histopathology scores, driven by reduced submucosal fibrosis and angiogenesis.

CONCLUSION

Although RADA16 and Gelatin-thrombin similarly accelerated hemostasis in this sheep endoscopic sinus surgery model, only RADA16 reduced postoperative synechiae formation at 2 weeks with an absence of synechiae at 6 weeks. Histology suggested RADA16 enhanced mucosal regeneration.

Engineered hydrogels for peripheral nerve repair

Peripheral nerve injury (PNI) is a complex disease that often appears in young adults. It is characterized by a high incidence, limited treatment options, and poor clinical outcomes. This disease not only causes dysfunction and psychological disorders in patients but also brings a heavy burden to the society. Currently, autologous nerve grafting is the gold standard in clinical treatment, but complications, such as the limited source of donor tissue and scar tissue formation, often further limit the therapeutic effect. Recently, a growing number of studies have used tissue-engineered materials to create a natural microenvironment similar to the nervous system and thus promote the regeneration of neural tissue and the recovery of impaired neural function with promising results. Hydrogels are often used as materials for the culture and differentiation of neurogenic cells due to their unique physical and chemical properties. Hydrogels can provide three-dimensional hydration networks that can be integrated into a variety of sizes and shapes to suit the morphology of neural tissues. In this review, we discuss the recent advances of engineered hydrogels for peripheral nerve repair and analyze the role of several different therapeutic strategies of hydrogels in PNI through the application characteristics of hydrogels in nerve tissue engineering (NTE). Furthermore, the prospects and challenges of the application of hydrogels in the treatment of PNI are also discussed.

Self-Assembling Peptide RADA16 Nanofiber Scaffold Hydrogel-Wrapped Concentrated Growth Factors in Osteogenesis of MC3T3

Concentrated growth factors (CGFs) are widely used in surgery with bone grafting, but the release of growth factors from CGFs is rapid. RADA16, a self-assembling peptide, can form a scaffold that is similar to the extracellular matrix. Based on the properties of RADA16 and CGF, we hypothesized that the RADA16 nanofiber scaffold hydrogel could enhance the function of CGFs and that the RADA16 nanofiber scaffold hydrogel-wrapped CGFs (RADA16-CGFs) would perform a good osteoinductive function. This study aimed to investigate the osteoinductive function of RADA16-CGFs. Scanning electron microscopy, rheometry, and ELISA were performed, and MC3T3-E1 cells were used to test cell adhesion, cytotoxicity, and mineralization after administration with RADA16-CGFs. We found that RADA16 endowed with the sustained release of growth factors from CGFs, which can help maximize the function of CGFs in osteoinduction. The application of the atoxic RADA16 nanofiber scaffold hydrogel with CGFs can be a new therapeutic strategy for the treatment of alveolar bone loss and other problems that require bone regeneration.

Release systems based on self-assembling RADA16-I hydrogels with a signal sequence which improves wound healing processes

Self-assembling peptides can be used for the regeneration of severely damaged skin. They can act as scaffolds for skin cells and as a reservoir of active compounds, to accelerate scarless wound healing. To overcome repeated administration of peptides which accelerate healing, we report development of three new peptide biomaterials based on the RADA16-I hydrogel functionalized with a sequence (AAPV) cleaved by human neutrophil elastase and short biologically active peptide motifs, namely GHK, KGHK and RDKVYR. The peptide hybrids were investigated for their structural aspects using circular dichroism, thioflavin T assay, transmission electron microscopy, and atomic force microscopy, as well as their rheological properties and stability in different fluids such as water or plasma, and their susceptibility to digestion by enzymes present in the wound environment. In addition, the morphology of the RADA-peptide hydrogels was examined with a unique technique called scanning electron cryomicroscopy. These experiments enabled us to verify if the designed peptides increased the bioactivity of the gel without disturbing its gelling processes. We demonstrate that the physicochemical properties of the designed hybrids were similar to those of the original RADA16-I. The materials behaved as expected, leaving the active motif free when treated with elastase. XTT and LDH tests on fibroblasts and keratinocytes were performed to assess the cytotoxicity of the RADA16-I hybrids, while the viability of cells treated with RADA16-I hybrids was evaluated in a model of human dermal fibroblasts. The hybrid peptides revealed no cytotoxicity; the cells grew and proliferated better than after treatment with RADA16-I alone. Improved wound healing following topical delivery of RADA-GHK and RADA-KGHK was demonstrated using a model of dorsal skin injury in mice and histological analyses. The presented results indicate further research is warranted into the engineered peptides as scaffolds for wound healing and tissue engineering.

Repair of critical-sized rat cranial defects with RADA16-W9 self-assembled peptide hydrogel

Bone defects are common in orthopaedics and there is an urgent need to explore effective bone repair materials with osteoinductive activity. Peptide self-assembled nanomaterials have a fibrous structure like that of the extracellular matrix and are ideal bionic scaffold materials. In this study, a short peptide WP9QY (W9) with strong osteoinductive effect was tagged to a self-assembled peptide RADA16 molecule through solid phase synthesis to design a RADA16-W9 peptide gel scaffold. A rat cranial defect was used as a research model to explore the effect of this peptide material on the repair of bone defects in vivo. The structure characteristic of the functional self-assembling peptide nanofiber hydrogel scaffold RADA16-W9 was evaluated by atomic force microscopy (AFM). Then adipose stem cells (ASCs) were isolated from Sprague-Dawley (SD) rat and cultured. the cellular compatibility of scaffold was evaluated through Live/Dead assay. Furthermore, we explore the effects of hydrogels in vivo with the critical-sized mouse calvarial defect model. Micro-CT analysis showed that the RADA16-W9 group had higher levels of bone volume/total volume (BV/TV) (P < 0.05)，Trabecular number(TB.N) (P < 0.05)，bone mineral density (BMD)(P < 0.05) and trabecular thickness (Tb. Th) (P < 0.05) compared with the RADA16 and PBS groups. Hematoxylin and eosin (H&E) staining showed that RADA16-W9 group had the highest bone regeneration level. Histochemical staining showed significantly higher expression levels of osteogenic factors such as alkaline phosphatase (ALP) and osteocalcin (OCN) in the RADA16-W9 group than in the other two groups (P < 0.05). Reverse transcription polymerase chain reaction (RT-PCR) quantification showed higher mRNA expression levels of osteogenic-related genes ALP, Runt-related transcription factor 2(Runx2), OCN, Osteopontin (OPN) in the RADA16-W9 group than in the RADA16 and PBS groups (P < 0.05). The live/dead staining results showed that RADA16-W9 is not toxic to rASCs and has good biocompatibility. In vivo experiments show that it accelerates the process of bone reconstruction, significantly promoting bone regeneration and can be used to develop a molecular drug for bone defect repair.

An injectable hydrogel scaffold with IL-1β-activated MSC-derived exosomes for the treatment of endometritis

Chronic endometritis is a common gynecological disease resulting from various long-term recurrent infections, and is closely related to myositis, miscarriage, and even infertility. There is still no satisfactory treatment method currently in clinical therapy. Mesenchymal stem cell (MSC)-derived exosomes, an important kind of paracrine product, have been used to treat inflammatory diseases due to their promising immunomodulatory function and tissue repair ability similar to MSCs. Considering that the exosome contents and functions are regulated by the MSC status and the MSC status is significantly influenced by its surrounding microenvironment, we propose a hypothesis that exosomes derived from inflammation-simulated MSCs will possess stronger inhibition ability for inflammation. Herein, we used IL-1β to activate rat bone MSCs for obtaining β-exo and constructed an injectable polypeptide hydrogel scaffold by loading β-exo (β-exo@pep) for an in situ slow release of β-exo. The results showed that the polypeptide hydrogel can provide a sustained release of exosomes in 14 days. The β-exo@pep composite hydrogel can more effectively inhibit the production of inflammatory factors such as TNF-α, IL-1β, and IFN-γ, while it can promote the production of anti-inflammatory factors such as Arg-1, IL-6, and IL-10. The β-exo@pep composite hydrogel significantly promoted cell migration, invasion, and vessel tube formation in vitro. The experiments in a rat model of endometritis proved that the β-exo@pep composite scaffold possessed excellent ability towards anti-inflammation and endometrial regeneration. The research studies on the molecular mechanism revealed that the protein expressions of HMGB1 and phosphorylated IKB-α and p65 are down-regulated in the cells treated with β-exo@pep, indicating the involvement of the NF-κB signaling pathway. This study provides an effective method for the treatment of chronic endometritis, which is promising for clinical use.

Exosomes and Nano-SDF Scaffold as a Cell-Free-Based Treatment Strategy Improve Traumatic Brain Injury Mechanisms by Decreasing Oxidative Stress, Neuroinflammation, and Increasing Neurogenesis

Traumatic brain injury (TBI) causes a variety of complex pathological changes in brain parenchymal tissue by increasing neuroinflammatory and apoptosis responses. Currently, there is no treatment to resolve the consequences related to TBI. Recently, an extensive literature has grown up around the theme of bystander effects of stem cells, a mechanism of stem cells without the need for cell transplantation, which is called cell-free therapy. The purpose of this investigation was to determine the efficacy of a cell-free-based therapy strategy using exosomes derived from human neural stem cells (hNSCs) and a novel nano-scaffold in rats subjected to TBI. In this study, a series of in vitro and in vivo experiments from behavior tests to gene expression was performed to define the effect of exosomes in combination with a three-dimensional (3D) nano-scaffold containing a bio-motif of SDF1α (Nano-SDF). Application of exosomes with Nano-SDF significantly decreased oxidative stress in serum and brain samples. Moreover, treatment with exosomes and Nano-SDF significantly reduced the expression of Toll-like receptor 4 and its downstream signaling pathway, including NF-kβ and interleukin-1β. We also found that the cell-free-based therapy strategy could decrease reactive gliosis at the injury site. Interestingly, we showed that exosomes with Nano-SDF increased neurogenesis in the sub-ventricular zone of the lateral ventricle, indicating a bio-bridge mechanism. To sum up, the most obvious finding to emerge from this study is that a cell-free-based therapy strategy can be an effective option for future practice in the course of TBI.

Advances in the development and optimization strategies of the hemostatic biomaterials

Most injuries are accompanied by acute bleeding. Hemostasis is necessary to relieve pain and reduce mortality in these accidents. In recent years, the traditional hemostatic materials, including inorganic, protein-based, polysaccharide-based and synthetic materials have been widely used in the clinic. The most prominent of these are biodegradable collagen sponges (Helistat^®, United States), gelatin sponges (Ethicon^®, SURGIFOAM^®, United States), chitosan (AllaQuixTM, ChitoSAMTM, United States), cellulose (Tabotamp^®, SURGICEL^®, United States), and the newly investigated extracellular matrix gels, etc. Although these materials have excellent hemostatic properties, they also have their advantages and disadvantages. In this review, the performance characteristics, hemostatic effects, applications and hemostatic mechanisms of various biomaterials mentioned above are presented, followed by several strategies to improve hemostasis, including modification of single materials, blending of multiple materials, design of self-assembled peptides and their hybrid materials. Finally, the exploration of more novel hemostatic biomaterials and relative coagulation mechanisms will be essential for future research on hemostatic methods.

Self-assembling peptides as immunomodulatory biomaterials

Self-assembling peptides are a type of biomaterial rapidly emerging in the fields of biomedicine and material sciences due to their promise in biocompatibility and effectiveness at controlled release. These self-assembling peptides can form diverse nanostructures in response to molecular interactions, making them versatile materials. Once assembled, the peptides can mimic biological functions and provide a combinatorial delivery of therapeutics such as cytokines and drugs. These self-assembling peptides are showing success in biomedical settings yet face unique challenges that must be addressed to be widely applied in the clinic. Herein, we describe self-assembling peptides' characteristics and current applications in immunomodulatory therapeutics.

Modification Strategies for Ionic Complementary Self-Assembling Peptides: Taking RADA16-I as an Example

Ion-complementary self-assembling peptides have been studied in many fields for their distinct advantages, mainly due to their self-assembly properties. However, their shortcomings, such as insufficient specific activity and poor mechanical properties, also limited their application. For the better and wider application of these promising biomaterials, ion-complementary self-assembling peptides can be modified with their self-assembly properties not being destroyed to the greatest extent. The modification strategies were reviewed by taking RADA16-I as an example. For insufficient specific activity, RADA16-I can be structurally modified with active motifs derived from the active domain of the extracellular matrix or other related active factors. For weak mechanical properties, materials with strong mechanical properties or that can undergo chemical crosslinking were used to mix with RADA16-I to enhance the mechanical properties of RADA16-I. To improve the performance of RADA16-I as drug carriers, appropriate adjustment of the RADA16-I sequence and/or modification of the RADA16-I-related delivery system with polymer materials or specific molecules can be considered to achieve sustained and controlled release of specific drugs or active factors. The modification strategies reviewed in this paper may provide some references for further basic research and clinical application of ion-complementary self-assembling peptides and their derivatives.

Biomaterial and tissue-engineering strategies for the treatment of brain neurodegeneration

The incidence of neurodegenerative diseases is increasing due to changing age demographics and the incidence of sports-related traumatic brain injury is tending to increase over time. Currently approved medicines for neurodegenerative diseases only temporarily reduce the symptoms but cannot cure or delay disease progression. Cell transplantation strategies offer an alternative approach to facilitating central nervous system repair, but efficacy is limited by low in vivo survival rates of cells that are injected in suspension. Transplanting cells that are attached to or encapsulated within a suitable biomaterial construct has the advantage of enhancing cell survival in vivo. A variety of biomaterials have been used to make constructs in different types that included nanoparticles, nanotubes, microspheres, microscale fibrous scaffolds, as well as scaffolds made of gels and in the form of micro-columns. Among these, Tween 80-methoxy poly(ethylene glycol)-poly(lactic-co-glycolic acid) nanoparticles loaded with rhynchophylline had higher transport across a blood-brain barrier model and decreased cell death in an in vitro model of Alzheimer’s disease than rhynchophylline or untreated nanoparticles with rhynchophylline. In an in vitro model of Parkinson’s disease, trans-activating transcriptor bioconjugated with zwitterionic polymer poly(2-methacryoyloxyethyl phosphorylcholine) and protein-based nanoparticles loaded with non-Fe hemin had a similar protective ability as free non-Fe hemin. A positive effect on neuron survival in several in vivo models of Parkinson’s disease was associated with the use of biomaterial constructs such as trans-activating transcriptor bioconjugated with zwitterionic polymer poly(2-methacryoyloxyethyl phosphorylcholine) and protein-based nanoparticles loaded with non-Fe hemin, carbon nanotubes with olfactory bulb stem cells, poly(lactic-co-glycolic acid) microspheres with attached DI-MIAMI cells, ventral midbrain neurons mixed with short fibers of poly-(L-lactic acid) scaffolds and reacted with xyloglucan with/without glial-derived neurotrophic factor, ventral midbrain neurons mixed with Fmoc-DIKVAV hydrogel with/without glial-derived neurotrophic factor. Further studies with in vivo models of Alzheimer’s disease and Parkinson’s disease are warranted especially using transplantation of cells in agarose micro-columns with an inner lumen filled with an appropriate extracellular matrix material.

Recent advances in biopolymer-based hemostatic materials

Hemorrhage is the leading cause of trauma-related deaths, in hospital and pre-hospital settings. Hemostasis is a complex mechanism that involves a cascade of clotting factors and proteins that result in the formation of a strong clot. In certain surgical and emergency situations, hemostatic agents are needed to achieve faster blood coagulation to prevent the patient from experiencing a severe hemorrhagic shock. Therefore, it is critical to consider appropriate materials and designs for hemostatic agents. Many materials have been fabricated as hemostatic agents, including synthetic and naturally derived polymers. However, compared to synthetic polymers, natural polymers or biopolymers, which include polysaccharides and polypeptides, have greater biocompatibility, biodegradability, and processibility. Thus, in this review, we focus on biopolymer-based hemostatic agents of different forms, such as powder, particles, sponges, and hydrogels. Finally, we discuss biopolymer-based hemostats currently in clinical trials and offer insight into next-generation hemostats for clinical translation.

Recent Advances in Designing Fibrous Biomaterials for the Domain of Biomedical, Clinical, and Environmental Applications

Unique properties and potential applications of nanofibers have emerged as innovative approaches and opportunities in the biomedical, healthcare, environmental, and biosensor fields. Electrospinning and centrifugal spinning strategies have gained considerable attention among all kinds of strategies to produce nanofibers. These techniques produce nanofibers with high porosity and surface area, adequate pore architecture, and diverse chemical compositions. The extraordinary characteristics of nanofibers have unveiled new gates in nanomedicine to establish innovative fiber-based formulations for biomedical use, healthcare, and a wide range of other applications. The present review aims to provide a comprehensive overview of nanofibers and their broad range of applications, including drug delivery, biomedical scaffolds, tissue/bone-tissue engineering, dental applications, and environmental remediation in a single place. The review begins with a brief introduction followed by potential applications of nanofibers. Finally, the future perspectives and current challenges of nanofibers are demonstrated. This review will help researchers to engineer more efficient multifunctional nanofibers with improved characteristics for their effective use in broad areas. We strongly believe this review is a reader's delight and will help in dealing with the fundamental principles and applications of nanofiber-based scaffolds. This review will assist students and a broad range of scientific communities to understand the significance of nanofibers in several domains of nanotechnology, nanomedicine, biotechnology, and environmental remediation, which will set a benchmark for further research.

Biomimetic Hydrogel Scaffolds with Copper Peptide-Functionalized RADA16 Nanofiber Improve Wound Healing in Diabetes

Wound healing in diabetes is retarded by the dysfunctional local microenvironment. Although there are many studies using hydrogels as substitutes for natural extracellular matrices (ECMs), hydrogels that can mimic both the structure and functions of natural ECM remain a challenge. Self-assembling peptide RADA16 nanofiber has distinct advantageous to provide a biomimetic extracellular matrix nanofiber structure. However, it is still lack of biological cues to promote angiogenesis that is of vital significance for diabetic wounds healing. With a customized copper peptide GHK functionalized RADA16, an integrated approach using functionalized RADA16 nanofiber to chelate copper ion, has been innovatively proposed in this present study. The acquired composite hydrogel held the biomimetic nanofiber architecture, and exhibited promoting angiogenesis by both enhancing adhesion and proliferation of endothelial cells (EC) in vitro and neovascularization in vivo. It showed that the functionalized nanofiber scaffolds significantly accelerated wound closure, collagen deposition, and tissue remodeling both in healthy and diabetic mice. Furthermore, immunohistochemical analysis gave evidence that an upregulated expression of eNOS and CD31 in the copper peptide-functionalized RADA16 treated group. It can be envisioned that this scaffold can serve as a promising dressing for diabetic wound healing. This article is protected by copyright. All rights reserved.

Human Adipose-Derived Stem Cells Combined with Nano-Hydrogel Promote Functional Recovery after Spinal Cord Injury in Rats

Simple Summary

Nerve regeneration and functional recovery after spinal cord injury (SCI) are worldwide problems. Scientists have achieved encouraging results in the repair of spinal cord injuries using natural or synthetic materials. In this paper, we report that nano-hydrogel combined with human adipose-derived stem cells regulate the inflammatory microenvironment, protect neurons and axons, and promote motor function recovery. In addition, three proteins related to neuronal and axonal growth were screened by Liquid chromatography-mass spectrometry. These results provide evidence for clinical treatment of spinal cord injury.

Abstract

The treatment of spinal cord injury aims to reconstruct the fiber connection and restore the interrupted neural pathways. Adipose mesenchymal stem cells (ADSCs) can promote the recovery of motor functions in spinal cord injury. However, poor survival of ADSCs and leakage outside of the injury site after local transplantation reduce the number of cells, which seriously attenuates the cumulative effect. We performed heterotopic transplantation on rats with severe spinal cord injury using human ADSCs loaded within self-assembly hydrogel RADA16-RGD (R: arginine; A: alanine; D: aspartic acid; G: glycine). Our results indicate that the combined transplantation of human ADSCs with RADA16-RGD improved the survival of ADSCs at the injured site. The inflammatory reaction was inhibited, with improved survival of the neurons and increased residual area of nerve fibers and myelin protein. The functional behaviors were promoted, as determined by the Basso, Beattie, and Bresnahan (BBB) locomotor rating scale score and electrophysiological measurements. ADSCs can promote the repair of spinal cord injury. This study provides new ideas for the treatment of spinal cord injury.

Enhancement of DPP-IV inhibitory activity and the capacity for enabling GLP-1 secretion through RADA16-assisted molecular designed rapeseed peptide nanogels

The potential of pentapeptide IPQVS (RAP1) and octapeptide ELHQEEPL (RAP2) derived from rapeseed napin as natural dipeptidyl-peptidase IV (DPP-IV) inhibitors is promising. The objective was to develop a nanogel strategy to resist the hydrolysis of digestive and intestinal enzymes to enhance the DPP-IV inhibitory activity of RAP1 and RAP2, and stimulate glucagon-like peptide 1 (GLP-1) secretion of RAP2 by a RADA16-assisted molecular design. The linker of double Gly was used in the connection of RADA16 and the functional oligopeptide region (RAP1 and RAP2). Compared to the original oligopeptides, DPP-IV IC₅₀ of the nanogels RADA16-RAP1 and RADA16-RAP2 decreased by 26.43% and 17.46% in Caco-2 cell monolayers, respectively. The results showed that the two nanogel peptides with no toxicity to cells had higher contents of stable β-sheet structures (increased by 5.6-fold and 5.2-fold, respectively) than the original oligopeptides, and a self-assembled fibrous morphology. Rheological results suggested that the nanogels RADA16-RAP1 and RADA16-RAP2 exhibit good rheological properties for potential injectable applications; the storage modulus (G') was 10 times higher than the low modulus (G''). Furthermore, the RAP2 and its RADA16-assisted nanogel peptide at the concentration of 250 μM significantly (P < 0.05) increased the release of GLP-1 by 35.46% through the calcium-sensing receptor pathway in the enteroendocrine STC-1 cells. Hence, the innovative and harmless nanogels with the sequence of RADA16-GG-X_n have the potential for use by oral and injection administration for treating or relieving type 2 diabetes.

Facelift Patients Receiving Intraoperative Administration of a Self-assembling Hemostat Agent Experienced Minimal Bruising and No Acute Hematomas: A Pilot Study

Background

Hematomas are consistently cited as the most common complication of facelift surgery, with reported incidence rates ranging from 1% to 9% despite preventative measures. A self-assembling RADA16 peptide solution (PuraSinus, 3-D Matrix, Newton, MA) designed to aid in wound healing, adhesion prevention, and bleeding control has demonstrated hemostatic control of intra- and postoperative bleeding associated with various surgical procedures, including nasal and sinus surgery.

Objectives

To report surgical experience using novel application of RADA16 hemostatic agent in facelift procedures.

Methods

Through exploring incorporation of RADA16 hemostatic agent into standard of care, 15 higher-risk facelift patients were treated intraoperatively between December 2020 and July 2021. Postoperative follow-up was on post-procedure day 1 and 3 and at approximately one week. During follow-up, potential complications were assessed subjectively, including hematoma, swelling, and bruising; postoperative observations recorded; and photographs taken.

Results

Among facelift patients receiving intraoperative RADA16 hemostatic agent there were no hematomas or protracted ecchymosis events. The only significant complication was one patient admitted for intravenous hydration due to post-operative nausea and vomiting. All patients had minimal bruising or a dramatic absence of bruising and experienced no hemorrhage or hematoma. Through surgical experience, technique for RADA16 hemostatic agent placement was optimized and procedural details are provided.

Conclusions

Intraoperative administration of topical RADA16 hemostatic agent appears to deter acute hematoma and hemorrhage formation and early experience suggests that RADA16 hemostatic agent may also attenuate post-operative bruising in facelift patients. These observations warrant further investigation in a larger randomized controlled study.

Level of Evidence: 4

An injectable thermosensitive hydrogel with self-assembled peptide coupled with antimicrobial peptide for enhanced wound healing

Wound dressing based on thermosensitive hydrogel shows advantages over performed traditional dressings such as rapid reversible sol-gel-sol transition property and the capacity of filling the irregular wound area. Herein, RA-Amps...

PuraStat RADA16 Self-Assembling Peptide Reduces Postoperative Abdominal Adhesion Formation in a Rabbit Cecal Sidewall Injury Model

Objective: To evaluate the effect of PuraStat (2.5% RADA16) administration on postoperative abdominal adhesion formation in an in vivo model.

Methods: Anesthetized New Zealand white rabbits underwent cecal sidewall abrasion surgery in which the cecal serosa and juxtaposed parietal peritoneum were abraded after access through an abdominal midline incision. Eight animals were randomized to receive PuraStat administration at the interface of the injured tissues before incision closure, and five animals served as untreated controls. Treated animals received 3–12 ml PuraStat solution per lesion. Animals were sacrificed 14 days after surgery and examined for adhesion formation at the wound site.

Results: At study terminus, adhesions were identified in 90% (9/10) of abraded cecum/peritoneal wound sites in untreated controls versus 25% (4/16) of PuraStat-treated sites (p = 0.004). Mean ± SD Total Adhesion Score (average of the values for extent + strength of the adhesion in both defects per animal; maximum score = 14 points) was significantly 76% lower in PuraStat-treated animals (2.0 ± 3.0 points) compared to untreated controls (8.2 ± 1.9 points) (p = 0.029). Mean adhesion coverage area of wound sites was 79% lower in PuraStat-treated animals than controls (p < 0.001), and mean adhesion durability was 72% lower in PuraStat-treated animals versus controls (p = 0.005). Remnant hydrogel was observed at the wound sites of 75% of treated animals at postoperative Day 14.

Conclusion: PuraStat treatment has a positive protective effect in the cecal sidewall injury model, and significantly reduces abdominal adhesion formation at the interface of the injured cecum and overlying peritoneal sidewall defect.

Bio-Scaffolds as Cell or Exosome Carriers for Nerve Injury Repair

Central and peripheral nerve injuries can lead to permanent paralysis and organ dysfunction. In recent years, many cell and exosome implantation techniques have been developed in an attempt to restore function after nerve injury with promising but generally unsatisfactory clinical results. Clinical outcome may be enhanced by bio-scaffolds specifically fabricated to provide the appropriate three-dimensional (3D) conduit, growth-permissive substrate, and trophic factor support required for cell survival and regeneration. In rodents, these scaffolds have been shown to promote axonal regrowth and restore limb motor function following experimental spinal cord or sciatic nerve injury. Combining the appropriate cell/exosome and scaffold type may thus achieve tissue repair and regeneration with safety and efficacy sufficient for routine clinical application. In this review, we describe the efficacies of bio-scaffolds composed of various natural polysaccharides (alginate, chitin, chitosan, and hyaluronic acid), protein polymers (gelatin, collagen, silk fibroin, fibrin, and keratin), and self-assembling peptides for repair of nerve injury. In addition, we review the capacities of these constructs for supporting in vitro cell-adhesion, mechano-transduction, proliferation, and differentiation as well as the in vivo properties critical for a successful clinical outcome, including controlled degradation and re-absorption. Finally, we describe recent advances in 3D bio-printing for nerve regeneration.

Functionalized self-assembled peptide RAD/Dentonin hydrogel scaffold promotes dental pulp regeneration

RADA16-I is an ion-complementary self-assembled peptide with a regular folded secondary conformation and can be assembled into an ordered nanostructure. Dentonin is an extracellular matrix phosphate glycoprotein functional peptide motif-containing RGD and SGDG motifs. In this experiment, we propose to combine RAD and Dentonin to form a functionalized self-assembled peptide RAD/Dentonin hydrogel scaffold. Furthermore, we expect that the RAD with the addition of functional motif Dentonin can promote pulp regeneration. The study analyzed the physicochemical properties of RAD/Dentonin through circular dichroism, morphology scanning, and rheology. Besides, we examined the scaffold's biocompatibility by immunofluorescent staining, CCK-8 method, Live/Dead fluorescent staining, and 3D reconstruction. Finally, we applied ALP activity assay, RT-qPCR, and Alizarin red S staining to detect the effect of RAD/Dentonin on the odontogenic differentiation of human dental pulp stem cells (hDPSCs). The results showed that RAD/Dentonin spontaneously assembles into a hydrogel with aβ-sheet-based nanofiber network structure.In vitro, RAD/Dentonin has superior biocompatibility and enhances adhesive proliferation, migration, odontogenic differentiation, and mineralization deposition of hDPSCs. In conclusion, the novel self-assembled peptide RAD/Dentonin is a new scaffold material suitable for cell culture and has promising applications as a scaffold for endodontic tissue engineering.

Self-Assembling Peptides: From Design to Biomedical Applications

Self-assembling peptides could be considered a novel class of agents able to harvest an array of micro/nanostructures that are highly attractive in the biomedical field. By modifying their amino acid composition, it is possible to mime several biological functions; when assembled in micro/nanostructures, they can be used for a variety of purposes such as tissue regeneration and engineering or drug delivery to improve drug release and/or stability and to reduce side effects. Other significant advantages of self-assembled peptides involve their biocompatibility and their ability to efficiently target molecular recognition sites. Due to their intrinsic characteristics, self-assembled peptide micro/nanostructures are capable to load both hydrophobic and hydrophilic drugs, and they are suitable to achieve a triggered drug delivery at disease sites by inserting in their structure's stimuli-responsive moieties. The focus of this review was to summarize the most recent and significant studies on self-assembled peptides with an emphasis on their application in the biomedical field.

"PP-type" self-assembling peptides with superior rheological properties

The ionic-complementary self-assembling peptides discovered by Zhang Shuguang have solution-to-gel (sol-gel) transition capacity and one such peptide RADA16 has been commercialized into hemostatic agents. However, their sol-gel transition ability was not obvious because the peptide aqueous solution with a concentration greater than 1% w/v appeared to be thick and viscous. The current report describes PP-type self-assembling peptides. In addition to the ionic-complementary sequence, they have prolines at both ends of the sequence. This feature has led to better solubility, lower viscosity of the peptide solution, and simplified synthesis and purification processes while maintaining the great gelling performance of the ionic-complementary peptides. The PP-type peptides self-assembled into a well-organized nanofiber scaffold as shown by TEM. Among the PP-type peptides, the PRVDP9 sequence peptide was tested as a hemostatic agent and a mucosal elevating agent. The results were comparable to the classic RADA16. The PP-type self-assembling peptides have superior sol-gel transition ability. Therefore, it is predicted that they will be more suitable to be transported through catheters or endoscopes and have higher commercialization potential as compared with the classic self-assembling peptide sequences.

Repair of Peripheral Nerve Injury Using Hydrogels Based on Self-Assembled Peptides

Peripheral nerve injury often occurs in young adults and is characterized by complex regeneration mechanisms, poor prognosis, and slow recovery, which not only creates psychological obstacles for the patients but also causes a significant burden on society, making it a fundamental problem in clinical medicine. Various steps are needed to promote regeneration of the peripheral nerve. As a bioremediation material, self-assembled peptide (SAP) hydrogels have attracted international attention. They can not only be designed with different characteristics but also be applied in the repair of peripheral nerve injury by promoting cell proliferation or drug-loaded sustained release. SAP hydrogels are widely used in tissue engineering and have become the focus of research. They have extensive application prospects and are of great potential biological value. In this paper, the application of SAP hydrogel in peripheral nerve injury repair is reviewed, and the latest progress in peptide composites and fabrication techniques are discussed.

Unravelling the antimicrobial activity of peptide hydrogel systems: current and future perspectives

The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: β-hairpin/β-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.

Clinical Use of the Self-Assembling Peptide RADA16: A Review of Current and Future Trends in Biomedicine

RADA16 is a synthetic peptide that exists as a viscous solution in an acidic formulation. In an acidic aqueous environment, the peptides spontaneously self-assemble into β-sheet nanofibers. Upon exposure and buffering of RADA16 solution to the physiological pH of biological fluids such as blood, interstitial fluid and lymph, the nanofibers begin physically crosslinking within seconds into a stable interwoven transparent hydrogel 3-D matrix. The RADA16 nanofiber hydrogel structure closely resembles the 3-dimensional architecture of native extracellular matrices. These properties make RADA16 formulations ideal topical hemostatic agents for controlling bleeding during surgery and to prevent post-operative rebleeding. A commercial RADA16 formulation is currently used for hemostasis in cardiovascular, gastrointestinal, and otorhinolaryngological surgical procedures, and studies are underway to investigate its use in wound healing and adhesion reduction. Straightforward application of viscous RADA16 into areas that are not easily accessible circumvents technical challenges in difficult-to-reach bleeding sites. The transparent hydrogel allows clear visualization of the surgical field and facilitates suture line assessment and revision. The shear-thinning and thixotropic properties of RADA16 allow its easy application through a narrow nozzle such as an endoscopic catheter. RADA16 hydrogels can fill tissue voids and do not swell so can be safely used in close proximity to pressure-sensitive tissues and in enclosed non-expandable regions. By definition, the synthetic peptide avoids potential microbiological contamination and immune responses that may occur with animal-, plant-, or mineral-derived topical hemostats. In vitro experiments, animal studies, and recent clinical experiences suggest that RADA16 nanofibrous hydrogels can act as surrogate extracellular matrices that support cellular behavior and interactions essential for wound healing and for tissue regenerative applications. In the future, the unique nature of RADA16 may also allow us to use it as a depot for precisely regulated drug and biopharmaceutical delivery.

Advances in 3D peptide hydrogel models in cancer research

In vitro cell culture models on monolayer surfaces (2D) have been widely adapted for identification of chemopreventive food compounds and food safety evaluation. However, the low correlation between 2D models and in vivo animal models has always been a concern; this gap is mainly caused by the lack of a three-dimensional (3D) extracellular microenvironment. In 2D models, cell behaviors and functionalities are altered, resulting in varied responses to external conditions (i.e., antioxidants) and hence leading to low predictability. Peptide hydrogel 3D scaffolding technologies, such as PGmatrix for cell culture, have been recently reported to grow organoid-like spheroids physiologically mimicking the 3D microenvironment that can be used as an in vitro 3D model for investigating cell activities, which is anticipated to improve the prediction rate. Thus, this review focuses on advances in 3D peptide hydrogels aiming to introduce 3D cell culture tools as in vitro 3D models for cancer-related research regarding food safety and nutraceuticals.

Modern World Applications for Nano-Bio Materials: Tissue Engineering and COVID-19

Over the past years, biomaterials-based nano cues with multi-functional characteristics have been engineered with high interest. The ease in fine tunability with maintained compliance makes an array of nano-bio materials supreme candidates for the biomedical sector of the modern world. Moreover, the multi-functional dimensions of nano-bio elements also help to maintain or even improve the patients' life quality most securely by lowering or diminishing the adverse effects of in practice therapeutic modalities. Therefore, engineering highly efficient, reliable, compatible, and recyclable biomaterials-based novel corrective cues with multipurpose applications is essential and a core demand to tackle many human health-related challenges, e.g., the current COVID-19 pandemic. Moreover, robust engineering design and properly exploited nano-bio materials deliver wide-ranging openings for experimentation in the field of interdisciplinary and multidisciplinary scientific research. In this context, herein, it is reviewed the applications and potential on tissue engineering and therapeutics of COVID-19 of several biomaterials. Following a brief introduction is a discussion of the drug delivery routes and mechanisms of biomaterials-based nano cues with suitable examples. The second half of the review focuses on the mainstream applications changing the dynamics of 21st century materials. In the end, current challenges and recommendations are given for a healthy and foreseeable future.

Temperature-responsive supramolecular hydrogels

Hydrogels comprise a class of soft materials which are extremely useful in a number of contexts, for example as matrix-mimetic biomaterials for applications in regenerative medicine and drug delivery. One particular subclass of hydrogels consists of materials prepared through non-covalent physical crosslinking afforded by supramolecular recognition motifs. The dynamic, reversible, and equilibrium-governed features of these molecular-scale motifs often transcend length-scales to endow the resulting hydrogels with these same properties on the bulk scale. In efforts to engineer hydrogels of all types with more precise or application-specific uses, inclusion of stimuli-responsive sol-gel transformations has been broadly explored. In the context of biomedical uses, temperature is an interesting stimulus which has been the focus of numerous hydrogel designs, supramolecular or otherwise. Most supramolecular motifs are inherently temperature-sensitive, with elevated temperatures commonly disfavoring motif formation and/or accelerating its dissociation. In addition, supramolecular motifs have also been incorporated for physical crosslinking in conjunction with polymeric or macromeric building blocks which themselves exhibit temperature-responsive changes to their properties. Through molecular-scale engineering of supramolecular recognition, and selection of a particular motif or polymeric/macromeric backbone, it is thus possible to devise a number of supramolecular hydrogel materials to empower a variety of future biomedical applications.

Recent advances in guar gum based drug delivery systems and their administrative routes

Guar gum-based drug carrier systems have gained attention for the delivery of various therapeutic agents via different administration routes for attaining controlled and sustained release. Guar gum offers a safe and effective system for drug delivery due to its natural occurrence, easy availability, biocompatibility, and biodegradability, besides simple and mild preparation techniques. Furthermore, the possibility of using various routes such as oral, buccal, transdermal, intravenous, and gene delivery further diversify guar gum applications in the biomedical field. This review delineates the recent investigation on guar gum-based drug carrier systems like hydrogels, nanoparticles, nanocomposites, and scaffolds along with their related delivery routes. Also, the inclusion of data of the loading and subsequent release of the drugs enables to explore the noble and improved drug targeting therapies.

Peptide-Protein Interactions: From Drug Design to Supramolecular Biomaterials

The self-recognition and self-assembly of biomolecules are spontaneous processes that occur in Nature and allow the formation of ordered structures, at the nanoscale or even at the macroscale, under thermodynamic and kinetic equilibrium as a consequence of specific and local interactions. In particular, peptides and peptidomimetics play an elected role, as they may allow a rational approach to elucidate biological mechanisms to develop new drugs, biomaterials, catalysts, or semiconductors. The forces that rule self-recognition and self-assembly processes are weak interactions, such as hydrogen bonding, electrostatic attractions, and van der Waals forces, and they underlie the formation of the secondary structure (e.g., α-helix, β-sheet, polyproline II helix), which plays a key role in all biological processes. Here, we present recent and significant examples whereby design was successfully applied to attain the desired structural motifs toward function. These studies are important to understand the main interactions ruling the biological processes and the onset of many pathologies. The types of secondary structure adopted by peptides during self-assembly have a fundamental importance not only on the type of nano- or macro-structure formed but also on the properties of biomaterials, such as the types of interaction, encapsulation, non-covalent interaction, or covalent interaction, which are ultimately useful for applications in drug delivery.

Treatment with functionalized designer self-assembling peptide hydrogels promotes healing of experimental periodontal defects

BACKGROUND/OBJECTIVES

It has been reported that self-assembling peptide (SAP) hydrogels with functionalized motifs enhance proliferation and migration of host cells. How these designer SAP hydrogels perform in the treatment of periodontal defects remains unknown. This study aimed to test the potential of local application of designer SAP hydrogels with two different functionalized motifs in the treatment of experimental periodontal defects.

MATERIAL AND METHODS

In vitro, viability/proliferation of rat periodontal ligament-derived cells (PDLCs) cultured on an SAP hydrogel RADA16 and RADA16 with functionalized motifs, PRG (integrin binding sequence) and PDS (laminin cell adhesion motif), was assessed. Cell morphology was analyzed by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). In vivo, standardized periodontal defects were made mesially in the maxillary first molars of Wistar rats. Defects received RADA16, PRG, PDS or left unfilled. At 2 or 4 weeks postoperatively, healing was assessed by microcomputed tomography, histological and immunohistochemical methods.

RESULTS

Viability/proliferation of PDLCs was significantly greater on PRG than on RADA16 or PDS at 72 hours. rPDLCs in the PRG group showed enhanced elongations and cell protrusions. In vivo, at 4 weeks, bone volume fractions in the PRG and PDS groups were significantly greater than the RADA16 group. Histologically, bone formation was more clearly observed in the PRG and PDS groups compared with the RADA16 group. At 4 weeks, epithelial downgrowth in the hydrogel groups was significantly reduced compared to the Unfilled group. In Azan-Mallory staining, PDL-like bundles ran in oblique direction in the hydrogel groups. At 2 weeks, in the area near the root, proliferating cell nuclear antigen (PCNA)-positive cells were detected significantly more in the PRG group than other groups. At 4 weeks, in the middle part of the defect, a significantly greater level of vascular endothelial growth factor (VEGF)-positive cells and α-smooth muscle actin (SMA)-positive blood vessels were observed in the PRG group than in other groups.

CONCLUSION

The results indicate that local application of the functionalized designer SAP hydrogels, especially PRG, promotes periodontal healing by increasing cell proliferation and angiogenesis.

A Customized Self-Assembling Peptide Hydrogel-Wrapped Stem Cell Factor Targeting Pulp Regeneration Rich in Vascular-Like Structures

Pulp regeneration is to replace the inflamed/necrotic pulp tissue with regenerated pulp-like tissue to rejuvenate the teeth. Self-assembling peptide hydrogels RADA16-I (Ac-(RADA16-I)₄-CONH₂) can provide a three-dimensional environment for cells. The stem cell factor (SCF) plays a crucial role in homing stem cells. Combining these advantages, our study investigated the effects of SCF-RADA16-I on adhesion, proliferation, and migration of human dental pulp stem cells (DPSCs) and the angiogenesis of human umbilical vein endothelial cells (HUVECs). The β-sheet and grid structure were observed by circular dichroism (CD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Cytoskeleton staining, living cell staining, cell viability, cell migration, angiogenesis, and western blot assays were performed, and the results indicated that all the SCF groups were superior to the corresponding non-SCF groups in cell adhesion, proliferation, migration, and angiogenesis. RADA16-I provided a three-dimensional environment for DPSCs. Besides, the SCF promoted HUVECs to form more vascular-like structures and release more vascular endothelial growth factor A. In summary, the SCF-loaded RADA16-I scaffold improved adhesion, proliferation, and migration of DPSCs and the formation of more vascular-like structures of HUVECs. SCF-RADA16-I holds promise for guided pulp regeneration, and it can potentially be applied widely in tissue engineering and translational medicine in the future.