Development of porous ceramsite from construction and demolition waste

Comparative life cycle assessment of natural and recycled aggregate concrete: A review

Recycled aggregate concrete (RAC), mainly made from recycled materials such as construction and demolition waste (CDW), has emerged as a sustainable alternative to natural aggregate concrete (NAC). While RAC offers potential benefits in waste reduction and resource conservation, a comprehensive understanding of its environmental impact and sustainability compared to NAC has been lacking. This study addresses this gap by conducting a thorough review and analysis of comparative Life Cycle Assessment (LCA) studies between RAC and NAC. This paper synthesizes current literature to evaluate the environmental impact of both materials throughout their life cycles, from raw material extraction to disposal. It examines key factors such as energy consumption, greenhouse gas emissions, and resource depletion to provide a thorough comprehension of the effects on the environment of each concrete type throughout their life cycles. Challenges in using RAC as a sustainable concrete option, such as sourcing and quality control, are also discussed, along with recommendations for future research and industry practices. The findings indicate that the environmental impact of RAC compared to NAC is significantly influenced by transport distances and modes. In addition, the choice of functional units in LCAs substantially affects the comparison between RAC and NAC, with strength reliability offering a clear benefit by addressing concrete property variability and better reflecting real-world conditions.

Application of Carrier Materials in Self-Healing Cement-Based Materials Based on Microbial-Induced Mineralization

Microbially induced calcium carbonate precipitation (MICP) technology has attracted widespread research attention owing to its application in crack healing for cement-based materials in an intelligent and environmentally friendly manner. However, the high internal alkalinity, low nutrient content, and dense structure of cement-based materials have restricted its application in self-healing cement-based materials. Various carrier materials have been widely used for the immobilization of microorganisms in recent years. Carrier materials have significantly increased the ability of microorganisms to withstand extreme conditions (high temperature, high alkali, etc.) and have provided new ideas for the compatibility of microorganisms with cement-based materials. In this study, the basic principles of microbial self-healing technology in cement-based materials and microbial immobilization methods and the influencing factors are introduced, followed by a review of the research progress and application effects of different types of carrier materials, such as aggregate, low-alkali cementitious materials, organic materials, and microcapsules. Finally, the current problems and promising development directions of microbial carrier materials are summarized to provide useful references for the future development of microbial carriers and self-healing cement-based materials.

A novel process for preparing fireproofing materials from various industrial wastes

In the current study, the possibility of incorporating various industrial wastes into fireproofing materials was investigated. It was found that the newly developed materials showed excellent air sealing and fireproofing performance, with air permeability coefficients 3 to 4 orders of magnitude smaller than traditional fire prevention materials. The influence of different parameters on the air permeability was investigated, and the air sealing mechanisms were clarified through microstructure analysis. In addition, the workability and mechanical properties of the fireproofing materials for practical application in coal mine were studied. The new materials derived from industrial wastes had a compact and monolithic structure, and the excellent air tightness could be attributed to the pozzolanic activity of the industrial wastes and the film-forming property of organic polymers. Among the industrial wastes examined, a special coal fly ash with high pozzolanic activity and little free calcium oxide derived the best product with air permeability coefficient, tensile strength and breaking elongation of 4.17 × 10^-8 m²/s, 2.14 MPa and 48.90%, respectively. This study provides an economical, environmentally friendly and promising approach for industrial wastes recycling.

Applicability of recycled aggregates in concrete piles for soft soil improvement

The expressive generation of construction and demolition waste is stimulating several studies for reusing this material. The improvement of soft soils by concrete compaction piles has been widely applied for 40 years in some Brazilian cities. This technique is used to improve the bearing capacity of soft soils, allowing executing shallow foundations instead of deep foundations. The compaction piles use a high volume of material. This article explored the possibility of using recycled aggregates from construction waste to replace the natural aggregates in order to improve the bearing capacity of the soft soil, regarding its compressive strength. Construction wastes from different stages of a construction were used in order to make samples of concrete with recycled aggregates. The strength of concretes with natural aggregates was compared with the strength of concretes with recycled (fine and coarse) aggregates. Results show that all samples met the minimum compressive strength specified for compaction piles used to improve the bearing capacity of soft soils. The concrete with recycled aggregate from the structural stage had even higher resistances than the concrete with natural aggregates. This behaviour was attributed to the large amount of cementitious materials in the composition of this type of concrete. It was also observed that concrete with recycled fine aggregate has a superior resistance to concrete with recycled coarse aggregate.

Development of a hybrid model to predict construction and demolition waste: China as a case study

Construction and demolition waste (C&DW) is currently a worldwide issue, and the situation is the worst in China due to a rapid increase in the construction industry and the short life span of China's buildings. To create an opportunity out of this problem, comprehensive prevention measures and effective management strategies are urgently needed. One major gap in the literature of waste management is a lack of estimations on future C&DW generation. Therefore, this paper presents a forecasting procedure for C&DW in China that can forecast the quantity of each component in such waste. The proposed approach is based on a GM-SVR model that improves the forecasting effectiveness of the gray model (GM), which is achieved by adjusting the residual series by a support vector regression (SVR) method and a transition matrix that aims to estimate the discharge of each component in the C&DW. Through the proposed method, future C&DW volume are listed and analyzed containing their potential components and distribution in different provinces in China. Besides, model testing process provides mathematical evidence to validate the proposed model is an effective way to give future information of C&DW for policy makers.