Performance and dynamic characteristics of microbial communities in an internal circulation reactor for treating brewery wastewater

Approaches in Design of Laboratory-Scale UASB Reactors

Up-flow Anaerobic Sludge Blanket (UASB) reactors are popular tools in wastewater treatment systems due to the ability to work with high feed rates and wastes with high concentration of organic contaminants. While full-scale industrial applications of UASB reactors are developed and described in the available literature, laboratory-scale designs utilized for treatability testing are not well described. The majority of published studies do not describe the laboratory UASB construction details or do use reactors that already had developed a trophic network in microbial consortia under laboratory environment and therefore are more stable. The absence of defined guidelines for geometry design, selection of materials, construction, operation rules, and, especially, the start-up conditions, significantly hamper researchers who desire to conduct treatability testing using UASB reactors in laboratory scale. In this article, we compiled and analyzed the information available in the refereed literature concerning UASB reactors used in laboratory environment, where information on geometry and/or operational conditions were provided in detail. We utilized the information available in the literature and the experience gained in our laboratory (Sustainable Waste to Bioproducts Engineering Center) to suggest a unified operation flowchart and for design, construction, operation, and monitoring for a laboratory-scale UASB reactors.

Performance, kinetics behaviors and microbial community of internal circulation anaerobic reactor treating wastewater with high organic loading rate: Role of external hydraulic circulation

Performance of internal circulation anaerobic reactor (IC) treating wastewater at high organic loading rate (OLR) and role of external hydraulic circulation were evaluated. When the OLR was increased from 2.50 to 18.94kgCOD/m³/d, COD removal decreased to 85% slightly and methane production increased to 4.49L/L/d with the upflow velocity of 1.0m/h resulted from the additional hydraulic circulation. Withdrawal of external hydraulic circulation led to decrease of COD removal to lower than 60% drastically and methane production by 81%. Accumulation of volatile fatty acids caused decline of pH to below 6.0 and the shift of substrate metabolic pathway to the hybrid fermentation. In addition, both maximum methane production rate and maximum substrate degradation rate obtained from mathematical models decreased significantly. Hydrogenotrophic methanogens including Methanobacterium and Methanocorpusculum predominated in the anaerobic sludge and the shift of microbial community was also observed.

Combined ultrasonic and bioleaching treatment of hospital waste incinerator bottom ash with simultaneous extraction of selected metals

The mineralogy, as well as elemental composition, of the incinerated hospital waste (HW) ashes are not well known and need to be investigated for the safe handling and disposal of such ash. A study was conducted to investigate the chemical composition, mineralogy and bioleaching of selected metals from incinerated HW bottom ash using Aspergillus niger under the combined effect ofultrasonic radiation. Different techniques were utilized to determine the elemental composition (Electron Dispersive X-ray Spectroscopy [EDX], atomic absorption spectrophotometry, inductively coupled plasma-optical emission spectroscopy, ultraviolet-visible light spectrophotometer) and mineralogy (X-ray Diffraction) of the raw sample, as well as the bioleached samples. Chemical leaching tests were performed to determine the effect of different organic acids on metals dissolution. Microbes were tested for acid production and leaching capabilities of selected metals from medical waste (MW) bottom ash. Wet chemical and EDX analyses showed that the ash was enriched with metallic elements like Na, K, Ca, Fe and Al with a concentration range of 22-115 (g/kg). Furthermore, the ash contained heavy metals such as Cu, Cr, Ni, Sn and Ti in the range of 0.51-21.74 (mg/kg). Citric and oxalic acids generated by fungi could be important leaching agents acting to dissolve these metals. Under ultrasonic treatment, metals dissolution by the acidic metabolites was at its maximum after just 9 d of leaching. The results showed that the dissolution of metals was much higher in citric and oxalic acid than with other acids. Extraction of metals from incinerated MW ash indicated that this ash may be a potential source of metals in the future.