Electrochemical oxidation of the poultry manure anaerobic digested effluents for enhancing pollutants removal by Chlorella vulgaris

Integrating electrochemical pretreatment with microalgae treatment for nitrogen and phosphorus removal and resource recovery from swine wastewater

This study integrates electrochemical pretreatment with microalgae (Scenedesmus obliquus) treatment to enhance nitrogen and phosphorus removal and resource recovery from swine wastewater. By optimizing electrochemical and microalgae treatment conditions, the dilution factor and the hydraulic retention time for microalgae treatment were reduced to 5 times and 7 days, respectively. Under the optimized operational conditions, removal efficiencies of total nitrogen and ammonia could reach over 89 %and 96 %,respectively, and the removal efficiency of total phosphorus was over 99 %. The study also found that aluminum was more suitable than iron for anode as it produced fewer residues. Additionally, the electrochemical pretreatment reduced Cu2+ and Zn2+ concentrations, mitigating negative impacts on microalgal growth. The microalgae biomass harvested from developed processes was rich in saturated fatty acids, which was desirable for biodiesel production. This approach addresses the challenges of nutrient removal for swine wastewater treatment with high quality biomass recovery.

Influencing factors for nutrient removal from piggery digestate by coupling microalgae and electric field

Microalgae show great potential for nutrient removal from piggery digestate. However, full-strength piggery digestate have been found to severely inhibit microalgal growth. In this study, microalgae were coupled into the electric field (EF)system to form an electric field-microalgae system (EFMS). The effects of EF characteristics and environmental conditions on the growth of Desmodesmus sp. CHX1 and the removal of nitrogen and phosphorus in EFMS were explored. The results indicated that the optimal EF parameters for forming a fine EFMS were electrode of Zn (anode)/graphite (cathode), electric frequency of three times per day (10 min/time) and voltage of 12 V. The suitable light intensity and microalgae inoculation concentration for the EFMS were 180 μmol photons/(m²·s) and 0.2 g/L, respectively. Ammonium nitrogen and total phosphorus removal efficiencies were 65.38% and 96.16% in the piggery digestate by EFMS under optimal conditions. These results indicate that EFMS is a promising technology for nutrient removal from piggery digestate.

Integration of pre-precipitation optimizing performance of culture medium prepared from salvaged cyanobacterial slurry

Cyanobacterial slurry is a waste biomass produced in the remediation of eutrophic lakes; it is obtained in large volume and is difficult to treat, but it has the potential to be used as raw material for culture medium for oil-producing microalgae. In this study, three kinds of oil-producing microalgae were tested, including Chlorella vulgaris, Scenedesmus obliquus, and Nannochloropsis oculate. On the basis of the medium preparation method "hydrothermal oxidation + ultrafiltration," the pre-precipitation phenomenon induced by pH adjustment was implemented to modify the culture medium and improve its performance. Ammonia nitrogen and macromolecules (mainly humic substances) were found to possibly have a joint-influence mechanism upon microalgae. Pre-precipitation changed the nitrogen species distribution in the medium and lowered the concentration of macromolecules, which improved the ability of microalgae to use different forms of nitrogen. This promoted the growth of, and oil production by, the microalgae.

Microalgae-based livestock wastewater treatment (MbWT) as a circular bioeconomy approach: Enhancement of biomass productivity, pollutant removal and high-value compound production

The intensive livestock activities that are carried out worldwide to feed the growing human population have led to significant environmental problems, such as soil degradation, surface and groundwater pollution. Livestock wastewater (LW) contains high loads of organic matter, nitrogen (N) and phosphorus (P). These compounds can promote cultural eutrophication of water bodies and pose environmental and human hazards. Therefore, humanity faces an enormous challenge to adequately treat LW and avoid the overexploitation of natural resources. This can be accomplished through circular bioeconomy approaches, which aim to achieve sustainable production using biological resources, such as LW, as feedstock. Circular bioeconomy uses innovative processes to produce biomaterials and bioenergy, while lowering the consumption of virgin resources. Microalgae-based wastewater treatment (MbWT) has recently received special attention due to its low energy demand, the robust capacity of microalgae to grow under different environmental conditions and the possibility to recover and transform wastewater nutrients into highly valuable bioactive compounds. Some of the high-value products that may be obtained through MbWT are biomass and pigments for human food and animal feed, nutraceuticals, biofuels, polyunsaturated fatty acids, carotenoids, phycobiliproteins and fertilizers. This article reviews recent advances in MbWT of LW (including swine, cattle and poultry wastewater). Additionally, the most significant factors affecting nutrient removal and biomass productivity in MbWT are addressed, including: (1) microbiological aspects, such as the microalgae strain used for MbWT and the interactions between microbial populations; (2) physical parameters, such as temperature, light intensity and photoperiods; and (3) chemical parameters, such as the C/N ratio, pH and the presence of inhibitory compounds. Finally, different strategies to enhance nutrient removal and biomass productivity, such as acclimation, UV mutagenesis and multiple microalgae culture stages (including monocultures and multicultures) are discussed.

Removal, potential reaction pathways, and overall cost analysis of various pollution parameters and toxic odor compounds from the effluents of turkey processing plant using TiO2-assisted UV/O3 process

In the present study, removal of hazardous toxic odor compounds with color, COD and turbidity were concurrently investigated for the effluents of a turkey processing plant located in Bolu, Turkey. A hybrid TiO₂-assisted photo-ozonation (UV/TiO₂/O₃) process was set to address this issue. Subsequently, a comprehensive GC/MS method was developed for quantification of odor compounds. Finally, a complete overall cost analysis was incorporated with the findings of the study to demonstrate an economic analysis of the process. Descriptive results showed that the effluents had high pollution content in terms of color (0.374 IU; b = -0.06), COD (146 mg/L O₂) and turbidity (15.52 NTU). Moreover, dimethyl silanediol (DS, 34.3%), acetic acid (AA, 20.5%), and diisobutyl phthalate (DP, 32.5%) were determined as major odor compounds of the effluents. After UV/TiO₂/O₃ process, DS, AA, and DP were reduced to 12.4%, 12.0%, and 8.4%, respectively under the operating conditions of ozone dose of 16 mg/L, initial pH of 7.5, reaction time of 25 min, and catalyst dose of 3 g/L TiO₂. At the same conditions removal efficiencies of color, COD and turbidity were obtained %99, %85, and 78%, respectively. These values demonstrated the accuracy of UV/TiO₂/O₃ process in terms of removal of hazardous odor compounds and the other pollution parameters. Studies on reaction mechanism showed that main degradation mechanism occurred in three ways: formation of long-chained cyclic compounds from DS (1), formation of acetamide and ammonium acetate from AA (2), and formation of phthallic acid from DP (3). Finally, overall cost analysis showed that the current process costed 0.014 $ per 1 L of treated effluent and this value showed that the current process met the economic criteria in terms of feasibility.