Effect of TiO2 nanoparticles on UASB biomass activity and dewatered sludge

Nanomaterials for biogas augmentation towards renewable and sustainable energy production: A critical review

Nanotechnology is considered one of the most significant advancements in science and technology over the last few decades. However, the contemporary use of nanomaterials in bioenergy production is very deficient. This study evaluates the application of nanomaterials for biogas production from different kinds of waste. A state-of-the-art comprehensive review is carried out to elaborate on the deployment of different categories of nano-additives (metal oxides, zero-valent metals, various compounds, carbon-based nanomaterials, nano-composites, and nano-ash) in several kinds of biodegradable waste, including cattle manure, wastewater sludge, municipal solid waste, lake sediments, and sanitary landfills. This study discusses the pros and cons of nano-additives on biogas production from the anaerobic digestion process. Several all-inclusive tables are presented to appraise the literature on different nanomaterials used for biogas production from biomass. Future perspectives to increase biogas production via nano-additives are presented, and the conclusion is drawn on the productivity of biogas based on various nanomaterials. A qualitative review of relevant literature published in the last 50 years is conducted using the bibliometric technique for the first time in literature. About 14,000 research articles are included in this analysis, indexed on the Web of Science. The analysis revealed that the last decade (2010–20) was the golden era for biogas literature, as 84.4% of total publications were published in this timeline. Moreover, it was observed that nanomaterials had revolutionized the field of anaerobic digestion, methane production, and waste activated sludge; and are currently the central pivot of the research community. The toxicity of nanomaterials adversely affects anaerobic bacteria; therefore, using bioactive nanomaterials is emerging as the best alternative. Conducting optimization studies by varying substrate and nanomaterials’ size, concentration and shape is still a field. Furthermore, collecting and disposing nanomaterials at the end of the anaerobic process is a critical environmental challenge to technology implementation that needs to be addressed before the nanomaterials assisted anaerobic process could pave its path to the large-scale industrial sector.

Unveiling the distinctive role of titanium dioxide nanoparticles in aerobic sludge digestion

Aerobic digestion is considered to be a common process for the stabilization of waste activated sludge (WAS) in the small-sized wastewater treatment systems, while the broad application of titanium dioxide nanoparticles (TiO₂ NPs) results in their unavoidable existence in WAS aerobic digestion, with its role in aerobic sludge digestion being never documented. This study set up a series of aerobic sludge digesters to evaluate the previously unknown role of TiO₂ NPs on the performance of the digesters. The volatile solids (VS) degradation percentage increased from 21.9 ± 0.6% to 26.9 ± 0.1% - 30.0 ± 0.3% with the different contents of TiO₂ NPs (0, 1, 20 and 50 mg/L). Similarly, the total inorganic nitrogen production increased from 23.1 ± 0.3 to 31.0 ± 0.1 mg N/g VS with the rising TiO₂ NPs concentrations from 0 to 50 mg/L. The microbial analysis suggested that TiO₂ NPs contributed to the accumulation of specific microbes correlated with the degradation of organic substances and the conversion of nitrogen compounds. Model-based analysis showed the higher biodegradability and hydrolysis rate of sludge with TiO₂ NPs. Further mechanistic studies indicated that the enhancement of WAS solubilization and the degradation of recalcitrant substances (e.g., humic acid and cellulose) contributed to the better performance of experimental aerobic digesters, which was confirmed by the fourier transformation infrared spectroscopy (FTIR) indicating the converting of these materials into biodegradable substrates for digestion with TiO₂ NPs. It could be inferred from this investigation that aerobic digestion rather than anaerobic digestion would be a more suitable treatment method for sludge containing TiO₂ NPs.

Response of an aerobic denitrifier to titanium dioxide nanoparticles exposure

The cytotoxicity of titanium dioxide nanoparticles (TiO₂ NPs) to microorganisms has attracted great attention over the past few decades. As an important participator in the nitrogen cycle, aerobic denitrifiers have been proven to be negatively affected by TiO₂ NPs, but the mechanism of this effect remains unclear. In this study, the bacteria-nanoparticle interaction was investigated by exposing an aerobic denitrifier, Pseudomonas stutzeri PCN-1 to different concentrations of TiO₂ NPs at the dark condition, in order to investigate the cytotoxicity mechanism. The results illustrated that aerobic denitrification was inhibited at different TiO₂ NPs concentrations from 1 to 128 mg/L, accompanied by the postponement of nitrate reduction and the accumulations of nitrite and nitrous oxide. But this inhibitory effect was mitigated with increasing TiO₂ NPs concentrations. Further studies revealed that expressions of aerobic denitrification genes were also inhibited with the presence of TiO₂ NPs, and the inhibition effect on napA and nirS genes was more significant than that on nosZ and cnorB, which might directly bring about the delayed nitrate reduction and hindered nitrite transfer. Moreover, the decreased toxicities at higher TiO₂ NPs concentrations could be attributed to the formation of larger aggregates (>1000 nm), which greatly reduced the chance for direct interactions between NPs and bacterial membranes, as well as the interruption of denitrifying genes expressions. These findings were meaningful for the formation of deep insights into the mechanism of TiO₂ NPs cytotoxicity as well as the development of strategies to control the negative effect of nanoparticles in the environment.Aerobic denitrification characteristics of strain PCN-1 under different carbon sources.

Improvement of Methane Production from Sugar Beet Wastes Using TiO2 and Fe3O4 Nanoparticles and Chitosan Micropowder Additives

An experimental study was performed to measure biogas production from sugar beet waste, which is, in fact, the chopped parts of the sugar beet not going through the sugar extraction process, at different additive concentrations. Medium molecular weight chitosan in microsize and TiO₂ and Fe₃O₄ nanoparticles were added to ten experimental reactors to investigate their effect on the anaerobic digestion process. Three different concentrations of 0.01, 0.04, and 0.12% w/w were used for each additive. Biogas production and methane content were compared with a control sample containing no additive. Adding chitosan in powder form did not help the process nor improved methanogenic activities. The results showed no effect on anaerobic digestion by the addition of TiO₂ nanoparticles in the mentioned concentrations, whereas adding Fe₃O₄ nanoparticles led to a slight increase in methane production and in volatile solid and total solid reduction. The maximum enhancement in methane and biogas production in the sample containing 0.04% Fe₃O₄, as compared with the control sample, reached 19.77% and 15.09%, respectively.

Photodegradation performance and mechanism of 4-nonylphenol by WO3/TiO2 and TiO2 nanotube array photoelectrodes

TiO₂ Nanotube arrays (TNA) and WO₃-coated TNA photoelectrodes were fabricated using an in situ anodization and pulse electrochemical deposition technology. The performance of the TNA photoelectrodes in the photocatalytic (PC) and photoelectrocatalytic (PEC) degradation of 4-nonylphenol (4-NP) was investigated. The effects of the initial pH and the anions on the degradation rates and reaction mechanism of 4-NP were studied by the photoluminescence (PL) spectra and electrochemical impedance spectra (EIS). The degradation of 4-NP was fitted to a first-order reaction, and the apparent kinetic constants were 1.9 × 10^-2 min^-1 for TNA photoelectrodes and 2.4 × 10^-2 min^-1 for WO₃/TNA photoelectrodes. When a bias potential of 1.0 V was applied, the values for TNA and WO₃/TNA photoelectrodes increased to 2.5 × 10^-2 and 3.0 × 10^-2 min^-1, respectively. The degradation of 4-NP was controlled by a charge-transfer process one. WO₃-decorated TNA photoelectrodes could increase the adsorption of 4-NP and promote its degradation. For the TNA and WO₃/TNAs photoelectrodes, acid and alkaline solutions could facilitate the formation of hydroxyl radicals, whereas the removal of 4-NP was inhibited. The presence of [Formula: see text] , Cl^-, [Formula: see text] and [Formula: see text] has a negative effect on the formation of •OH, so did the removal of 4-NP. For the TNA photoelectrodes, the inhibition effect of [Formula: see text] on the formation of hydroxyl radicals and the removal of 4-NP was the most serious compared with that of [Formula: see text], Cl^- and [Formula: see text] , while for the WO₃/TNA photoelectrodes the inhibition effect of [Formula: see text] on the removal of 4-NP was maximum.