Wastewater nutrient removal in a mixed microalgae-bacteria culture: effect of light and temperature on the microalgae-bacteria competition

Performance evaluation of species varied fixed bed biofilm reactor for wastewater treatment of Dhobi Khola outfall, Setopul, Kathmandu, Nepal

The sustainability of wastewater treatment plants poses significant challenges for developing countries, necessitating substantial investment for operation and maintenance. Biofilm reactors seeded with specific species of microorganisms were investigated under controlled environmental conditions. However, the performance evaluation of such reactors under natural conditions remains largely underexplored. This study investigated wastewater treatment capabilities of bench-scale fixed bed biofilm reactors, employing various species (Wastewater Microbes, Pseudomonas, Algae, and a co-culture of Algae and Pseudomonas). The reactors (Treatments and Control) were filled with 28 mm nominal-size local aggregates as packing media, operated under different contact times, and subjected to varying concentrations of heavy metals (Zn, Cd). To assess the reactor performances, the Bland-Altman Plot and Chemical Oxygen Demand (COD) removal kinetics were evaluated. The results revealed that the reactor initiated with a co-culture exhibited the optimal COD removal efficiency, reaching 84 ± 1 %. The reactor initially seeded with wastewater microbes exhibited the highest heavy metal elimination, achieving 94 ± 1 % and 88 ± 1 % removal for Zn and Cd respectively. The wastewater-seeded reactor demonstrated the zero-order COD removal kinetic coefficient (k) of 46.41 mg/L/h at an average influent COD concentration of 558 mg/L at 10 h contact time. While Pseudomonas-seeded reactor demonstrated k = 0.73 mg/L/h at 20 h contact time with 69 mg/L influent COD and heavy metal concentrations Zn = 26 mg/L and Cd = 3.57 mg/L. The findings of this study suggest that variations in environmental conditions, contact time, and heavy metal concentration have minimal impact on the pollutant removal efficacy of the reactors, and provide robust evidence for their viability as a sustainable alternative in municipal wastewater treatment. The study also identifies the possibility of treating specific wastewater characteristics by altering the dominant species in the reactors, paving the way for further research on the efficacy of other microbial genomes in fixed bed biofilm reactors.

Algae and indigenous bacteria consortium in treatment of shrimp wastewater: A study for resource recovery in sustainable aquaculture system

Shrimp production facilities produce large quantities of wastewater, which consists of organic and inorganic pollutants. High concentrations of these pollutants in shrimp wastewater cause serious environmental problems and, therefore, a method of treating this wastewater is an important research topic. This study investigated the impact of algae and indigenous bacteria on treating shrimp wastewater. A total of four different microalgae cultures, including Chlorococcum minutus, Porphyridum cruentum, Chlorella vulgaris and Chlorella reinhardtii along with two cyanobacterial cultures, Microcystis aeruginosa and Fishcherella muscicola were used with indigenous bacterial cultures to treat shrimp wastewater. The highest soluble chemical oxygen demand (sCOD) removal rate (95%) was observed in the samples that were incubated using F. muscicola. Total dissolved nitrogen was degraded >90% in the C. vulgaris, M. aeruginosa, and C. reinhardtii seeded samples. Dissolved organic nitrogen removal was significantly higher for C. vulgaris (93%) as compared to other treatments. Similarly, phosphate degradation was very successful for all the algae-bacteria consortium (>99%). Moreover, the degradation kinetics were calculated, and the lowest half-life (t1/2) for sCOD (5 days) was recorded for the samples seeded with M. aeruginosa. Similarly, treatment with F. muscicola and C. reinhardtii showed the lowest t1/2 of NH3-N (2.9 days) and phosphate (2.7 days) values. Overall, the results from this study suggest that the symbiotic relationship between indigenous bacteria and algae significantly enhanced the process of shrimp wastewater treatment within 21 days of incubation. The outcome of this study supports resource recovery in the aquaculture sector and could be beneficial to treat a large-scale shrimp facility's wastewater worldwide.

Low-Cost Greywater Treatment Using Polyculture Microalgae-Microalgal Growth, Organics, and Nutrient Removal Subject to pH and Temperature Variations During the Treatment

Organics and nutrient removal studies are rarely done using polyculture microalgae, and that too in outdoor conditions, as they are often not deemed effective for wastewater treatment purposes. This study examined the organics and nutrient removal efficiency of polyculture microalgae cultivated in greywater. The reactor was operated in outdoor conditions. Hence, it was subjected to natural pH and temperature variations. A growth rate of 0.05 g L-1 day-1 was observed for temperatures up to 37 °C, beyond which the growth rate declined by 0.07 g L-1 day-1. During the treatment, the pH of the system was observed to be between 7.4 and 8.4. However, the growth rate would again pick up (0.05 g L-1 day-1) when the pH and temperature moved towards the optimum range, indicating that the polycultures adapt very quickly to their environment. The maximum biomass concentration reached 0.82 gL-1. The highest removal efficiency of organic carbon, ammonia, and phosphate was 80.7, 61.9, and 58.4%, respectively. Nitrate and nitrite concentrations remained ≤ 1.3 mgL-1 and ≤ 2 mgL-1, respectively, indicating the absence of nitrification/denitrification and ammonia volatilization. The mass balance of microalgae indicated that the primary removal mechanism of nitrogen and phosphorus removal was assimilation by the microalgae. The study proved polyculture microalgae to be as effective as some monoculture species in wastewater treatment, which require costlier controlled growth conditions. The high organics and nutrient removal by polycultures in outdoor conditions could pave the way to reducing wastewater treatment costs.

Enhanced biological phosphorus removal sustained by aeration-free filamentous microalgal-bacterial granular sludge

The microalgal-bacterial granular sludge (MBGS) based enhanced biological phosphorus removal (EBPR) (MBGS-EBPR) was recently proposed as a sustainable wastewater treatment process. Previous work showed the possibility of obtaining an MBGS-EBPR process starting from mature MBGS and phosphate-accumulating organisms (PAOs) enriched aerobic granular sludge (AGS) and validated the effectiveness of removing carbon/nitrogen/phosphorus with mechanical aeration. The present work evaluated whether the same could be achieved starting from conventional activated sludge and operating under aeration-free conditions in an alternating dark/light photo-sequencing batch reactor (PSBR). We successfully cultivated filamentous MBGS with a high settling rate (34.5 m/h) and fast solid-liquid separation performance, which could be attributed to the proliferation of filamentous cyanobacteria and stimulation of extracellular polymeric substances (EPS) production. The process achieved near-complete steady-state removal of carbon (97.2 ± 1.9 %), nitrogen (93.9 ± 0.7 %), and phosphorus (97.7 ± 1.7 %). Moreover, improved phosphorus release/uptake driven by photosynthetic oxygenation under dark/light cycles suggests the enrichment of PAOs and the establishment of MBGS-EBPR. Batch tests showed similar phosphorus release rates in the dark but significantly lower phosphorus uptake rates in the presence of light when the filamentous granules were disrupted. This indicates that the filamentous structure of MBGS has minor limitations on substrate mass transfer while exerting protective effects on PAOs, thus playing an important role in sustaining the function of aeration-free EBPR. Microbial assays further indicated that the enrichment of filamentous cyanobacteria (Synechocystis, Leptoolybya, and Nodosilinea), putative PAOs and EPS producers (Hydrogenophaga, Thauera, Flavobacterium, and Bdellovibrio) promoted the development of filamentous MBGS and enabled the high-efficient pollutant removal. This work provides a feasible and cost-effective strategy for the startup and operation of this innovative process.

Advanced treatment of antibiotic-polluted wastewater by a consortium composed of bacteria and mixed cyanobacteria

This study constructed a cyanobacteria-bacteria consortium using a mixture of non-toxic cyanobacteria (Synechococcus sp. and Chroococcus sp.) immobilized in calcium alginate and native bacteria in wastewater. The consortium was used for the advanced treatment of sulfamethoxazole-polluted wastewater and the production of cyanobacterial lipid. Mixed cyanobacteria increased the abundances of denitrifying bacteria and phosphorus-accumulating bacteria as well as stimulated various functional enzymes in the wastewater bacterial community, which efficiently removed 70.01-71.86% of TN, 91.45-97.04% of TP and 70.72-76.85% of COD from the wastewater. The removal efficiency of 55.29-69.90% for sulfamethoxazole was mainly attributed to the upregulation of genes encoding oxidases, reductases, oxidoreductases and transferases in two cyanobacterial species as well as the increased abundances of Stenotrophomonas, Sediminibacterium, Arenimonas, Novosphingobium, Flavobacterium and Hydrogenophaga in wastewater bacterial community. Transcriptomic responses proved that mixed cyanobacteria presented an elevated lipid productivity of 33.90 mg/L/day as an adaptive stress response to sulfamethoxazole. Sediminibacterium, Flavobacterium and Exiguobacterium in the wastewater bacterial community may also promote cyanobacterial lipid synthesis through symbiosis. Results of this study proved that the mixed cyanobacteria-bacteria consortium was a promising approach for advanced wastewater treatment coupled to cyanobacterial lipid production.

Cultivation of microalgae-bacteria consortium by waste gas-waste water to achieve CO2 fixation, wastewater purification and bioproducts production

The cultivation of microalgae and microalgae-bacteria consortia provide a potential efficient strategy to fix CO2 from waste gas, treat wastewater and produce value-added products subsequently. This paper reviews recent developments in CO2 fixation and wastewater treatment by single microalgae, mixed microalgae and microalgae-bacteria consortia, as well as compares and summarizes the differences in utilizing different microorganisms from different aspects. Compared to monoculture of microalgae, a mixed microalgae and microalgae-bacteria consortium may mitigate environmental risk, obtain high biomass, and improve the efficiency of nutrient removal. The applied microalgae include Chlorella sp., Scenedesmus sp., Pediastrum sp., and Phormidium sp. among others, and most strains belong to Chlorophyta and Cyanophyta. The bacteria in microalgae-bacteria consortia are mainly from activated sludge and specific sewage sources. Bioengineer in CBB cycle in microalgae cells provide effective strategy to achieve improvement of CO2 fixation or a high yield of high-value products. The mechanisms of CO2 fixation and nutrient removal by different microbial systems are also explored and concluded, the importance of microalgae in the technology is proven. After cultivation, microalgae biomass can be harvested through physical, chemical, biological and magnetic separation methods and used to produce high-value by-products, such as biofuel, feed, food, biochar, fertilizer, and pharmaceutical bio-compounds. Although this technology has brought many benefits, some challenging obstacles and limitation remain for industrialization and commercializing.

An insight on pollutant removal mechanisms in phycoremediation of textile wastewater

Pollutants, including dyes and heavy metals from textile industrial discharge, adversely affect the surface and groundwater resources, and pose a severe risk to the living organisms in the ecosystem. Phycoremediation of wastewater is now an emerging trend, as it is colossally available, inexpensive, eco-friendly, and has many other benefits, with high removal efficiency for undesirable substances, when compared to conventional treatment methods. Algae have a good binding affinity toward nutrients and toxic compounds because of various functional groups on its cell surface by following the mechanisms such as biosorption, bioaccumulation, or alternate biodegradation pathway. Algae-based treatments generate bioenergy feedstock as sludge, mitigate CO2, synthesize high-value-added products, and release oxygenated effluent. Algae when converted into activated carbon also show good potential against contaminants, because of its higher binding efficiency and surface area. This review provides an extensive analysis of different mechanisms involved in removal of undesirable and hazardous substances from textile wastewater using algae as green technology. It could be founded that both biosorption and biodegradation mechanisms were responsible for the removal of dye, organic, and inorganic pollutants. But for the heavy metals removal, biosorption results in higher removal efficiency. Overall, phycoremediation is a convenient technique for substantial conserving of energy demand, reducing greenhouse gas emissions, and removing pollutants.

Phycoremediation of heavy metals and production of biofuel from generated algal biomass: a review

Due to human activity and natural processes, heavy metal contamination frequently affects the earth's water resources. The pollution can be categorized as resistant and persistent since it poses a significant risk to terrestrial and marine biological systems and human health. Because of this, several appeals and demands have been made worldwide to try and clean up these contaminants. Through bioremediation, algal cells are frequently employed to adsorb and eliminate heavy metals from the environment. Bioremediation is seen as a desirable strategy with few adverse effects and low cost. Activities and procedures for bioremediation involving algal cells depend on various environmental factors, including salinity, pH, temperature, the concentration of heavy metals, the amount of alga biomass, and food availability. Additionally, the effectiveness of removing heavy metals from the environment by assessing how environmental circumstances affect algal activities. The main issues discussed are (1) heavy metal pollution of water bodies, the role of algal cells in heavy metal removal, the methods by which algae cells take up and store heavy metals, and the process of turning the algae biomass produced into biofuel. (2) To overcome the environmental factors and improve heavy metals bioremediation, many strategies are applied, such as immobilizing the cells, consortium culture, and using dry mass rather than living cells. (3) The processes for converting produced algal biomass into biofuels like biodiesel and biomethanol. The present study discusses the life cycle assessment and the limitations of biofuel products from algae biomass.

Microalgal co-cultivation -recent methods, trends in omic-studies, applications, and future challenges

The burgeoning human population has resulted in an augmented demand for raw materials and energy sources, which in turn has led to a deleterious environmental impact marked by elevated greenhouse gas (GHG) emissions, acidification of water bodies, and escalating global temperatures. Therefore, it is imperative that modern society develop sustainable technologies to avert future environmental degradation and generate alternative bioproduct-producing technologies. A promising approach to tackling this challenge involves utilizing natural microbial consortia or designing synthetic communities of microorganisms as a foundation to develop diverse and sustainable applications for bioproduct production, wastewater treatment, GHG emission reduction, energy crisis alleviation, and soil fertility enhancement. Microalgae, which are photosynthetic microorganisms that inhabit aquatic environments and exhibit a high capacity for CO2 fixation, are particularly appealing in this context. They can convert light energy and atmospheric CO2 or industrial flue gases into valuable biomass and organic chemicals, thereby contributing to GHG emission reduction. To date, most microalgae cultivation studies have focused on monoculture systems. However, maintaining a microalgae monoculture system can be challenging due to contamination by other microorganisms (e.g., yeasts, fungi, bacteria, and other microalgae species), which can lead to low productivity, culture collapse, and low-quality biomass. Co-culture systems, which produce robust microorganism consortia or communities, present a compelling strategy for addressing contamination problems. In recent years, research and development of innovative co-cultivation techniques have substantially increased. Nevertheless, many microalgae co-culturing technologies remain in the developmental phase and have yet to be scaled and commercialized. Accordingly, this review presents a thorough literature review of research conducted in the last few decades, exploring the advantages and disadvantages of microalgae co-cultivation systems that involve microalgae-bacteria, microalgae-fungi, and microalgae-microalgae/algae systems. The manuscript also addresses diverse uses of co-culture systems, and growing methods, and includes one of the most exciting research areas in co-culturing systems, which are omic studies that elucidate different interaction mechanisms among microbial communities. Finally, the manuscript discusses the economic viability, future challenges, and prospects of microalgal co-cultivation methods.

Microeukaryotic predators shape the wastewater microbiome

The physicochemical parameters that shape the prokaryotic community composition in wastewater have been extensively studied. In contrast, it is poorly understood whether and how biotic interactions affect the prokaryotic community composition in wastewater. We used metatranscriptomics data from a bioreactor sampled weekly over 14 months to investigate the wastewater microbiome, including often neglected microeukaryotes. Our analysis revealed that while prokaryotes are unaffected by seasonal changes in water temperature, they are impacted by a seasonal, temperature-induced change in the microeukaryotic community. Our findings suggest that selective predation pressure exerted by microeukaryotes is a significant factor shaping the prokaryotic community in wastewater. This study underscores the importance of investigating the entire wastewater microbiome to develop a comprehensive understanding of wastewater treatment.

Optimization of the culture of Chlorella sorokiniana PA.91 by RSM: effect of temperature, light intensity, and MgAC-NPs

The unique physicochemical properties of magnesium amino clay nanoparticles (MgAC-NPs) tends to be beneficial in the application as a co-additive in treating microalgae. Also, MgAC-NPs can create oxidative stress in the environment, concurrently elective control bacteria in mixotrophic culture, and stimulate CO₂ biofixation. The condition of the cultivation of newly isolated strains, Chlorella sorokiniana PA.91, was optimized for the first time for MgAC-NPs at various temperatures and light intensities in the culture medium of municipal wastewater (MWW) by central composite design in the response surface methodology (RSM-CCD). This study examined synthesized MgAC-NP with their FE-SEM, EDX, XRD, and FT-IR characteristics. The synthesized MgAC-NPs were naturally stable, cubic shaped, and within the size range of 30-60 nm. The optimization results show that at culture conditions of 20 °C, 37 μmol m^-2 s^-1, and 0.05 g L^-1, microalga MgAC-NPs have the best growth productivity and biomass performance. Maximum dry biomass weight (55.41%), specific growth rate (30.26%), chlorophyll (81.26%), and carotenoids (35.71%) were achieved under the optimized condition. Experimental results displayed that C.S. PA.91 has a high capacity for lipid extraction (1.36 g L^-1) and significant lipid efficiency (45.1%). Also, in 0.2 and 0.05 g L^-1 of the MgAC-NPs, COD removal efficiency 91.1% and 81.34% from C.S. PA.91 showed, respectively. These results showed the potential of C.S. PA.91-MgAC-NPs for nutrient removal in wastewater treatment plants and their quality as sources of biodiesel.

Accurate assessment of the effect of Rhodamine 6G solution as a spectral converter on biomass production of microalgae Chlorella sp., nitrate uptake, and energy consumption by the light source

Spectral conversion of light introduced as a new technique to manage incoming light photons into the culture medium of photosynthetic microorganisms which can increase biomass production. In this work, a much more accurate value of the effect of spectral conversion on the growth of Chlorella sp. was obtained. For this purpose, the light source and Rhodamine 6G solution, as a spectral converter, was placed in the center of the culture flask, which was covered with aluminum foil. The loss of photons was largely avoided due to the additional homogeneous distribution of light. Modification of white light using the solution has increased biomass productivity up to 300%. Also, for biomass productivity of 1 mg L^-1 day^-1, the energy consumption of the white light source was reduced up to 75%. Nitrate uptake has also increased up to 28%, and intracellular lipid content has decreased, as well.

Interaction of Scenedesmus quadricauda and native bacteria in marine biopharmaceutical wastewater for desirable lipid production and wastewater treatment

Improving knowledge of the alga-bacterium interaction can promote the wastewater treatment. The untreated marine biopharmaceutical wastewater (containing native bacteria) was used directly for culturing microalgae. Unlike previous studies on specific bacteria in algal-bacterial co-culture systems, the effect of native bacteria in wastewater on microalgae growth was investigated in this study. The results showed that the coexistence of native bacteria greatly promoted the microalgae growth, ultimately producing biomass of 0.64 g/L and biomass productivity of 56.18 mg/L·d. Moreover, the lipid accumulation in the algae + bacteria group was 1.31 and 1.13 times higher than those of BG11 and pure algae, respectively, mainly attributed to the fact that bacteria provided a good environment for microalgae growth by using extracellular substances released from microalgae for their own growth, and providing micromolecules of organic matter and other required elements to microalgae. This study would lay the theoretical foundation for improving biopharmaceutical wastewater treatment.

Microalgae-based wastewater treatment: Mechanisms, challenges, recent advances, and future prospects

The rapid expansion of both the global economy and the human population has led to a shortage of water resources suitable for direct human consumption. As a result, water remediation will inexorably become the primary focus on a global scale. Microalgae can be grown in various types of wastewaters (WW). They have a high potential to remove contaminants from the effluents of industries and urban areas. This review focuses on recent advances on WW remediation through microalgae cultivation. Attention has already been paid to microalgae-based wastewater treatment (WWT) due to its low energy requirements, the strong ability of microalgae to thrive under diverse environmental conditions, and the potential to transform WW nutrients into high-value compounds. It turned out that microalgae-based WWT is an economical and sustainable solution. Moreover, different types of toxins are removed by microalgae through biosorption, bioaccumulation, and biodegradation processes. Examples are toxins from agricultural runoffs and textile and pharmaceutical industrial effluents. Microalgae have the potential to mitigate carbon dioxide and make use of the micronutrients that are present in the effluents. This review paper highlights the application of microalgae in WW remediation and the remediation of diverse types of pollutants commonly present in WW through different mechanisms, simultaneous resource recovery, and efficient microalgae-based co-culturing systems along with bottlenecks and prospects.

Understanding the influence of free nitrous acid on microalgal-bacterial consortium in wastewater treatment: A critical review

Microalgal-bacterial consortium (MBC) constitutes a sustainable and efficient alternative to the conventional activated sludge process for wastewater treatment (WWT). Recently, integrating the MBC process with nitritation (i.e., shortcut MBC) has been proposed to achieve added benefits of reduced carbon and aeration requirements. In the shortcut MBC system, nitrite or free nitrous acid (FNA) accumulation exerts antimicrobial influences that disrupt the stable process performance. In this review, the formation and interactions that influence the performance of the MBC were firstly summarized. Then the influence of FNA on microalgal and bacterial monocultures and related mechanisms together with the knowledge gaps of FNA influence on the shortcut MBC were highlighted. Other challenges and future perspectives that impact the scale-up of the shortcut MBC for WWT were illustrated. A potential roadmap is proposed on how to maximize the stable operation of the shortcut MBC system for sustainable WWT and high-value biomass production.

Phosphorous removal and recovery from urban wastewater: Current practices and new directions

Phosphate rocks are an irreplaceable resource to produce fertilizers, but their availability will not be enough to meet the increasing demands of agriculture for food production. At the same time, the accumulation of phosphorous discharged by municipal wastewater treatment plants (WWTPs) is one of the main causes of eutrophication. In a perspective of circular economy, WWTPs play a key role in phosphorous management. Indeed, phosphorus removal and recovery from WWTPs can both reduce the occurrence of eutrophication and contribute to meeting the demand for phosphorus-based fertilizers. Phosphorous removal and recovery are interconnected phases in WWTP with the former generally involved in the mainstream treatment, while the latter on the side streams. Indeed, by reducing phosphorus concentration in the WWTP side streams, a further improvement of the overall phosphorus removal from the WWTP influent can be obtained. Many studies and patents have been recently focused on treatments and processes aimed at the removal and recovery of phosphorous from wastewater and sewage sludge. Notably, new advances on biological and material sciences are constantly put at the service of conventional or unconventional wastewater treatments to increase the phosphorous removal efficiency and/or reduce the treatment costs. Similarly, many studies have been devoted to the development of processes aimed at the recovery of phosphorus from wastewaters and sludge to produce fertilizers, and a wide range of recovery percentages is reported as a function of the different technologies applied (from 10-25% up to 70-90% of the phosphorous in the WWTP influent). In view of forthcoming and inevitable regulations on phosphorous removal and recovery from WWTP streams, this review summarizes the main recent advances in this field to provide the scientific and technical community with an updated and useful tool for choosing the best strategy to adopt during the design or upgrading of WWTPs.

Advanced HRT-Controller Aimed at Optimising Nitrogen Recovery by Microalgae: Application in an Outdoor Flat-Panel Membrane Photobioreactor

A fuzzy knowledge-based controller of hydraulic retention time (HRT) was designed and tested in an outdoor membrane photobioreactor (MPBR) to improve nitrogen recovery from a microalgae cultivation system, maintaining the algae as photosynthetically active as possible and limiting their competition with other microorganisms. The hourly flow of the MPBR system was optimised by adjusting the influent flow rate to the outdoor environmental conditions which microalgae were exposed to at any moment and to the nitrogen uptake capacity of the culture. A semi-empirical photosynthetically active radiation (PAR) prediction model was calibrated using total cloud cover (TCC) forecast. Dissolved oxygen, standardised to 25 °C (DO25), was used as an on-line indicator of microalgae photosynthetic activity. Different indexes, based on suspended solids (SS), DO25, and predicted and real PAR, were used as input variables, while the initial HRT of each operating day (HRT0) and the variation of HRT (ΔHRT) served as output variables. The nitrogen recovery efficiency, measured as nitrogen recovery rate (NRR) per nitrogen loading rate (NLR) in pseudo-steady state conditions, was improved by 45% when the HRT-controller was set in comparison to fixed 1.25-d HRT. Consequently, the average effluent total soluble nitrogen (TSN) concentration in the MPBR was reduced by 47%, accomplishing the discharge requirements of the EU Directive 91/271/EEC.

Assessing and modeling nitrite inhibition in microalgae-bacteria consortia for wastewater treatment by means of photo-respirometric and chlorophyll fluorescence techniques

Total nitrite (TNO₂ = HNO₂ + NO^-₂) accumulation due to the activity of ammonia-oxidizing bacteria (AOB) was monitored in microalgae-bacteria consortia, and the inhibitory effect of nitrite/free nitrous acid (NO₂-N/FNA) on microalgae photosynthesis and inhibition mechanism was studied. A culture of Scenedesmus was used to run two sets of batch reactors at different pH and TNO₂ concentrations to evaluate the toxic potential of NO₂-N and FNA. Photo-respirometric tests showed that NO₂-N accumulation has a negative impact on net oxygen production rate (OPR_NET). Chlorophyll a fluorescence analysis was used to examine the biochemical effects of NO₂-N stress and the mechanism of NO₂-N inhibition. The electron transport rate (ETR), non-photochemical quenching (NPQ), and JIP-test revealed that the electron transport chain between Photosystems II and I (PS II and PS I) was hindered at NO₂-N concentrations above 25 g N m^-3. Electron acceptor Q_A was not able to reoxidize and could not transfer electrons to the next electron acceptor, Q_B, accumulating P₆₈₀⁺ (excited PS II reaction center) and limiting oxygen production. A semi-continuous reactor containing a Scenedesmus culture was monitored by photo-respirometry tests and Chlorophyll a fluorescence to calibrate NO₂-N inhibition (5-35 g N m^-3). Non-competitive inhibition and Hill-type models were compared to select the best-fitting inhibition equations. Inhibition was correctly modeled by the Hill-type model and a half inhibition constant (K_I) for OPR_NET, NPQ, maximum photosynthetic rate (ETR_MAX) and the performance index PI_ABS was 23.7 ± 1.2, 26.36 ± 1.10, 39 ± 2 and 26.5 ± 0.4, respectively.

Removal of protozoan (oo)cysts and bacteria during microalgae harvesting: Outcomes from a lab-scale experiment

The efficiency of microalgae harvesting on the removal of Giardia spp. cysts, Cryptosporidium spp. oocysts, total coliforms, Escherichia coli, Enterococcus spp. and Clostridium spp. was assessed in lab-scale experiments (Jartest and Flotatest) using effluent from a flat panel photobioreactor used for Chlorella sorokiniana cultivation. Three harvesting methods were evaluated: (1) flocculation induced by pH modulation followed by sedimentation (pH-SED), (2) flocculation induced by pH modulation followed by dissolved air flotation (pH-DAF), and (3) coagulation using an organic coagulant (Tanfloc SG) followed by dissolved air flotation (Coag-DAF). The results indicated that the three harvesting methods were efficient in removing protozoan (oo)cysts and bacteria, achieving percentages of removal higher than 97% for all the analyzed pathogens. Among the three methods, pH-SED showed the best removal performance: 99.60% (2.5 log) for Giardia spp. cysts, 100% (>6.3 log) for total coliforms, 100% (>4.6 log) for Escherichia coli, 100% (>5.8 log) for Enterococcus spp. and 99.96% (3.6 log) for Clostridium spp. Clostridium spp. seemed to be more tolerant to the harvesting methods than the other groups of bacteria analyzed in the study, and its presence was positively correlated to the presence of Giardia spp. cysts.

Emerging role of microalgae in heavy metal bioremediation

Microalgae have been publicized for their diversified dominance responsiveness and bioaccumulation potential toward pollutants in an ecosystem. Also, algal's incredible capability as biocatalysts in environmental appliances has been well elucidated owing to their robustness and simple nutritional demand. Additionally, microalgae can deliver various collections of bio-based chemical compounds helpful for diversified applications, especially as green alternatives. The environment has been contaminated with various polluting agents; one principal polluting agent is heavy metals which are carcinogenic and show toxicity even in minimal quantity, cause unsatisfactory threats to the environmental ecosystem, including human and animal health. There is a prominent tendency to apply microalgae in the phytoremediation of heavy metals compounds because of its vast benefits, including great accessibility, cost-effective, excellent toxic metal eliminating efficiency, and nontoxic to the ecosystem. This review uncovers the most recent advancements and mechanisms associated with the bioremediation process and biosorption interaction of substantial harmful synthetic compounds processing microalgae species. Furthermore, future challenges and prospects in the utilization of microalgae in heavy metals bioremediation are also explored. The current review aims to give valuable information to aid the advancement of robust and proficient future microalgae-based heavy metal bioremediation innovations and summarizing a wide range of benefits socioeconomic scope to be employed in heavy metal compound removal in environment system.

Understanding the by-product formation potential during phenol oxidation from in-situ electro-generated radicals by microalgae harvesting

Advanced oxidation processes have gained colossal attention owing to the prospect of accessible mineralization, but by-product formation and its toxicity evaluation are still inconclusive. The present study demonstrated the performance of electrochemical oxidation process supported with graphite electrodes for the oxidation of phenol from modulated coke oven wastewater. The results suggested that the hydrogen peroxide along with the in-situ synthesized oxidizing agents has the ability to increase the phenol mineralization 1.5 times and by-product toxicity potential on microalgae, Scenedesmus sp. CBIIT(ISM) also revealed that chlorophyll-a synthesis has increased after the electro-oxidation process in coke oven wastewater. The experimental results for phenol mineralization and by-product formation were validated using a mass spectrophotometer.

Anaerobic membrane bioreactors for wastewater treatment: Challenges and opportunities

Anaerobic membrane bioreactors (AnMBRs) have become a new mature technology and entered into the wastewater market, but there are several challenges to be addressed for wide applications. In this review, we discuss challenges and potentials of AnMBRs focusing on wastewater treatment. Nitrogen and dissolved methane control, membrane fouling and its control, and membrane associated cost including energy consumption are main bottlenecks to facilitating AnMBR application in wastewater treatment. Accumulation of dissolved methane in AnMBR permeate decreases the benefit of methane energy and contributes to methane gas emissions to atmosphere. Separate control units for nitrogen and dissolved methane add system complexity and increase capital and operating and maintenance (O & M) costs in AnMBR-centered wastewater treatment. Alternatively, methane-based denitrification can be an ideal nitrogen control process due to simultaneous removal of nitrogen and dissolved methane. Membrane fouling and energy associated with membrane fouling control are major limitations, in addition to membrane cost. More efforts are required to decrease capital and O & M costs associated with the control of dissolved methane nitrogen and membrane fouling to facilitate AnMBRs for wastewater treatment. PRACTITIONER POINTS: AnMBRs can accelerate anaerobic wastewater treatment including dilute wastewater. Nitrogen and dissolved methane control is detrimental for AnMBR application to wastewater treatment. Membrane biofilm reactors using gas-permeable membranes are suitable for simultaneous nitrogen and dissolved methane control. High capital and O & M costs from membranes are a major bottleneck to wide application of AnMBRs. Dynamic membranes could be an option to reduce capital and O & M costs for AnMBRs.

Nutrient and pathogen removal from anaerobically treated black water by microalgae

The demand for systems that efficiently and sustainably recover value-added compounds and materials from waste streams is a major challenge. The use of wastewater as a source for recovery of carbon and nutrients is an attractive and sustainable alternative. In this study, anaerobically treated black water was treated in photobioreactors (PBRs) inoculated with Chlorella sorokiniana, and the process was investigated in terms of phosphorus and nitrogen removal, biomass growth, and the removal of pathogens. The consumption of bicarbonate (alkalinity) and acetate (volatile fatty acids) as carbon sources by microalgae was investigated. The average nutrient removal achieved was 66% for N and 74% for P. A high consumption of alkalinity (83%) and volatile organic acids (76%) was observed, which suggests that these compounds were used as a source of carbon. The biomass production was 73 mg L^-1 day^-1, with a mean biomass of 0.7 g L^-1 at the end of the batch treatment. At the end of the experiments, a log removal/inactivation of 0.51 log for total coliforms and 2.73 log for Escherichia coli (E. coli) was observed. The configuration used, a flat-panel PBR operated in batch mode without CO₂ supplementation, is a cost-effective and environmentally sustainable method for recovering of nutrients and production of algal biomass.

Mineral pollutants removal through immobilized microalgae-bacterial flocs in a multitrophic microreactor

Microalgae-bacterial flocs (MaB-flocs) immobilization technique using polyvinyl alcohol (PVA) crosslinked with sodium alginate represent a novel approach for sustainable pollutants removal. The present work was performed to evaluate the performance of a multitrophic batch reactor at microscale for treating two synthetic wastewater solutions prepared with two different initial Chemical Oxygen Demand (COD): 200 mg.L^-1 and 450 mg.L^-1, respectively. Three MaB-flocs concentrations were entrapped into PVA-alginate beads: C₁ (2%, v/v), C₂ (5%, v/v) and C₃ (10%, v/v), without O₂ supply, during three periods 2, 4 and 6 days of batch incubation. PVA-alginate beads containing the highest concentration C₃ of MaB-flocs improved the performance of the microreactor to remove significantly NH₄⁺ and PO₄^3- of about 61% and 82%, respectively, from wastewater more than two other concentrations used. This result confirms that C₃ of MaB-flocs displays not only a good potential for nutrients removals but also the highest MaB-flocs morphological progression after 6 days of treatment with the highest COD of 450 mg.L^-1. The feasibility of the PVA-alginate for cells immobilization, investigated through microscopy analysis, reveals that the evolution of multicellularity in MaB-flocs, for all experiments.

Indigenous microalgae biomass cultivation in continuous reactor with anaerobic effluent: effect of dilution rate on productivity, nutrient removal and bioindicators

Effluents from municipal wastewater treatment have been long recognized as suitable media for the cultivation of microalgae biomass. However, few studies report data concerning biomass productivity in continuous reactors using unsterilized wastewater effluents. This study focuses on indigenous microalgae strains that grow with native bacteria and are applicable for biomass production and tertiary wastewater treatment in continuous growth mode. Initially, five Chlorophyta strains were isolated and grown in batch mode to single out a potential inoculum for the experiments in continuous growth mode. The isolate Chlorella sp. L06 was selected and evaluated based on five dilution rates from 0.1 to 0.5 day^-1 on continuous growth reactor using unsterilized secondary effluent as culture medium. Maximal volumetric biomass productivity of 283 mg L^-1 day^-1 was achieved at 0.3 day^-1 without CO₂ addition or air bubbling. Carbohydrates were the major fraction of the dried biomass, followed by proteins and then lipids. The highest removal rates of total nitrogen and phosphorus from the liquid phase were 13.0 and 1.4 mg L^-1 day^-1, respectively, and were obtained at 0.4 day^-1. The maximal decay rate for E. coli (2.9 day^-1) was achieved both at 0.3 and 0.4 day^-1. Conclusively, Chlorella sp. L06 cultivation in unsterilized secondary effluent can be adjusted depending on the objective: for biomass production, a dilution rate of approximately 0.3 day^-1 is recommended; and for tertiary treatment a rate of 0.4 day^-1 is suggested.

Emerging prospects of mixotrophic microalgae: Way forward to sustainable bioprocess for environmental remediation and cost-effective biofuels

Algal bioremediation becoming most fascinating to produce biomass as biofuels feedstock while remediating wastes, also improving carbon-footprint through carbon capturing and utilization (CCU) technology. Non-algae process however offers effective treatment but metabolic CO₂ emission is major drawback towards sustainable bioprocess. Mixotrophic cultivation strategy (MCS) enables to treat organic and inorganic wastes which broadly extend microalgae application towards cleaner and sustainable bioeconomy. Latest focus of global think-tanks to encourage bioprocess holding promise of sustainability via CCU ability as important trait. Several high CO₂ emitting industries forced to improve their carbon-footprints. MCS driven microalgae treatment could be best solution for those industries. This review covers recent updates on MCS applications for waste-to-value (biofuels) and environment remediation. Moreover, recommendations to fill knowledge gaps, and commercial algal biofuel could be cost-effectiveness and sustainable technology for biocircular economy if fuelled by waste streams from other industries.

Nutrient Recovery from Anaerobically Treated Blackwater and Improving Its Effluent Quality through Microalgae Biomass Production

The blackwater stream of domestic wastewater contains energy and the majority of nutrients that can contribute to a circular economy. Hygienically safe and odor-free nutrient solution produced from anaerobically treated source-separated blackwater through an integrated post-treatment unit can be used as a source of liquid fertilizer. However, the high water content in the liquid fertilizer represents a storage or transportation challenge when utilized on agricultural areas, which are often situated far from the urban areas. Integration of microalgae into treated source-separated blackwater (BW) has been shown to effectively assimilate and recover phosphorus (P) and nitrogen (N) in the form of green biomass to be used as slow release biofertilizer and hence close the nutrient loop. With this objective, a lab-scale flat panel photobioreactor was used to cultivate Chlorella sorokiniana strain NIVA CHL 176 in a chemostat mode of operation. The growth of C. sorokiniana on treated source-separated blackwater as a substrate was monitored by measuring dry biomass concentration at a dilution rate of 1.38 d−1, temperature of 37 °C and pH of 7. The results indicate that the N and P recovery rates of C. sorokiniana were 99 mg N L−1d−1 and 8 mg P L−1d−1 for 10% treated BW and reached 213 mg N L−1d−1 and 35 mg P L−1d−1, respectively when using 20% treated BW as a substrate. The corresponding biomass yield on light, N and P on the 20% treated BW substrate were 0.37 g (mol photon)−1, 9.1 g g−1 and 54.1 g g−1, respectively, and up to 99% of N and P were removed from the blackwater.

Effect of ambient temperature variations on an indigenous microalgae-nitrifying bacteria culture dominated by Chlorella

Two outdoor photobioreactors were operated to evaluate the effect of variable ambient temperature on an indigenous microalgae-nitrifying bacteria culture dominated by Chlorella. Four experiments were carried out in different seasons, maintaining the temperature-controlled PBR at around 25 °C (by either heating or cooling), while the temperature in the non-temperature-controlled PBR was allowed to vary with the ambient conditions. Temperatures in the range of 15-30 °C had no significant effect on the microalgae cultivation performance. However, when the temperature rose to 30-35 °C microalgae viability was significantly reduced. Sudden temperature rises triggered AOB growth in the indigenous microalgae culture, which worsened microalgae performance, especially when AOB activity made the system ammonium-limited. Microalgae activity could be recovered after a short temperature peak over 30 °C once the temperature dropped, but stopped when the temperature was maintained around 28-30 °C for several days.

Optimising an outdoor membrane photobioreactor for tertiary sewage treatment

The operation of an outdoor membrane photobioreactor plant which treated the effluent of an anaerobic membrane bioreactor was optimised. Biomass retention times of 4.5, 6, and 9 days were tested. At a biomass retention time of 4.5 days, maximum nitrogen recovery rate:light irradiance ratios, photosynthetic efficiencies and carbon biofixations of 51.7 ± 14.3 mg N·mol^-1, 4.4 ± 1.6% and 0.50 ± 0.05 kg CO₂·m³_influent, respectively, were attained. Minimum membrane fouling rates were achieved when operating at the shortest biomass retention time because of the lower solid concentration and the negligible amount of cyanobacteria and protozoa. Hydraulic retention times of 3.5, 2, and 1.5 days were tested at the optimum biomass retention times of 4.5 days under non-nutrient limited conditions, showing no significant differences in the nutrient recovery rates, photosynthetic efficiencies and membrane fouling rates. However, nitrogen recovery rate:light irradiance ratios and photosynthetic efficiency significantly decreased when hydraulic retention time was further shortened to 1 day, probably due to a rise in the substrate turbidity which reduced the light availability in the culture. Optimal carbon biofixations and theoretical energy recoveries from the biomass were obtained at hydraulic retention time of 3.5 days, which accounted for 0.55 ± 0.05 kg CO₂·m^-3_influent and 0.443 ± 0.103 kWh·m^-3_influent, respectively.

Outdoor flat-panel membrane photobioreactor to treat the effluent of an anaerobic membrane bioreactor. Influence of operating, design, and environmental conditions

As microalgae have the ability to simultaneously remove nutrients from wastewater streams while producing valuable biomass, microalgae-based wastewater treatment is a win-win strategy. Although recent advances have been made in this field in lab conditions, the transition to outdoor conditions on an industrial scale must be further investigated. In this work an outdoor pilot-scale membrane photobioreactor plant was operated for tertiary sewage treatment. The effects of different parameters on microalgae performance were studied including: temperature, light irradiance (solar and artificial irradiance), hydraulic retention time (HRT), biomass retention time (BRT), air sparging system and influent nutrient concentration. In addition the competition between microalgae and ammonium oxidising bacteria for ammonium was also evaluated. Maximum nitrogen and phosphorus removal rates of 12.5 ± 4.2 mgN·L^-1·d^-1 and 1.5 ± 0.4 mgP·L^-1·d^-1, respectively, were achieved at a BRT of 4.5 days and HRT of 2.5 days, while a maximum biomass productivity of 78 ± 13 mgVSS·L^-1·d^-1 (VSS: volatile suspended solids) was reached. While the results obtained so far are promising, they need to be improved to make the transition to industrial scale operations feasible.