Production of polyhydroxyalkanoates (PHA) using sludge from different wastewater treatment processes and the potential for medical and pharmaceutical applications

Amino acid preparation and recovery from refractory sludge by the oxidative acid hydrolysis process

After the anaerobic digestion of excess sludge, dissolved organic matter is absorbed and used, but the treatment of refractory sludge is a headache. The oxidative acid (performic acid and hydrochloric acid) hydrolysis process can effectively prepare amino acids from refractory sludge. During the preparation process, insoluble proteins in sludge were turned into soluble proteins and peptides. All of them eventually hydrolyse into amino acids. The optimum conditions in the single-factor experiment were as follows: a temperature of 110°C, a reaction time of 24 h, and a hydrochloric acid (HCl) concentration of 6 M. The results showed that the maximum total yield of amino acids from refractory sludge was 94.76%. In the orthogonal experiment, the maximum total yield of amino acids was 97.20% under the optimum conditions of a temperature of 113.45°C, a reaction time of 26.79 h, and 5.92 M HCl. The recovery rate of purity amino acids was 17.16 g per 100 g of dry sludge. The recovery rate of the hydrochloric acid was approximately 70%. There were 17 kinds of amino acids in the hydrolysate, which could be used as deodorants, food additives, preservatives, and corrosion inhibitors. This new technology is expected to be very effective in the treatment of refractory sludge.

Effects of chemical oxygen demand concentration, pH and operation cycle on polyhydroxyalkanoates synthesis with waste sludge

To reduce the cost of polyhydroxyalkanoate (PHA) production and dispose the amount of waste sludge simultaneously, chemical oxygen demand (COD) concentration, pH and operation cycle were investigated to find the optimal PHA synthesis conditions with waste sludge in this study. The maximum PHA content (31.3% of the cell dry weight (CDW)), as well as the highest PHA conversion rate (0.30 mg COD/mg COD) and PHA-specific synthesis rate (6.12 mg COD/mg CDW·h), was achieved with initial COD concentration, pH value and operation cycle: 6000 mg/L, 8.5 and 24 h. In order to further investigate the process of PHA synthesis, COD removal rate and CDW were also introduced. This study could provide valuable information for increasing the production of PHA with waste sludge.

Polyhydroxyalkanoates: Trends and advances toward biotechnological applications

Plastics are an integral part of most of the daily requirements. Indiscriminate usage and disposal have led to the accumulation of massive quantities of waste. Their non-biodegradable nature makes it increasingly difficult to manage and dispose them. To counter this impending disaster, biodegradable polymers, especially polyhydroxy-alkanoates (PHAs), have been envisaged as potential alternatives. Owing to their unique physicochemical characteristics, PHAs are gaining importance for versatile applications in the agricultural and medical sectors. Applications in the medical sector are more promising because of their commercial viability and sustainability. Despite such potential, their production and commercialization are significant challenges. The major limitations are their poor mechanical strength, production in small quantities, costly feed, and lack of facilities for industrial production. This article provides an overview of the contemporary progress in the field, to attract researchers and stakeholders to further exploit these renewable resources to produce biodegradable plastics on a commercial scale.

Production of polyhydroxyalkanoates using dairy processing waste - A review

Bio-plastics are eco-friendly biopolymers finding tremendous application in the food and pharmaceutical industries. Bio-plastics have suitable physicochemical, mechanical properties, and do not cause any type of hazardous pollution upon disposal but have a high production cost. This can be minimized by screening potential bio-polymers producing strains, selecting inexpensive raw material, optimized cultivation conditions, and upstream processing. These bio-plastics specifically microbial-produced bio-polymers such as polyhydroxyalkanoates (PHAs) find application in food industries as packaging material owing to their desirable water barrier and gas permeability properties. The present review deals with the production, recovery, purification, characterization, and applications of PHAs. This is a comprehensive first review will also focus on different strategies adopted for efficient PHA production using dairy processing waste, its biosynthetic mechanism, metabolic engineering, kinetic aspects, and also biodegradability testing at the lab and pilot plant level. In addition to that, the authors will be emphasizing more on novel PHAs nanocomposites synthesis strategies and their commercial applicability.

Microbial Polyhydroxyalkanoates Granules: An Approach Targeting Biopolymer for Medical Applications and Developing Bone Scaffolds

Microbial polyhydroxyalkanoates (PHA) are proteinaceous storage granules ranging from 100 nm to 500 nm. Bacillus sp. serve as unique bioplastic sources of short-chain length and medium-chain length PHA showcasing properties such as biodegradability, thermostability, and appreciable mechanical strength. The PHA can be enhanced by adding functional groups to make it a more industrially useful biomaterial. PHA blends with hydroxyapatite to form nanocomposites with desirable features of compressibility. The reinforced matrices result in nanocomposites that possess significantly improved mechanical and thermal properties both in solid and melt states along with enhanced gas barrier properties compared to conventional filler composites. These superior qualities extend the polymeric composites' applications to aggressive environments where the neat polymers are likely to fail. This nanocomposite can be used in different industries as nanofillers, drug carriers for packaging essential hormones and microcapsules, etc. For fabricating a bone scaffold, electrospun nanofibrils made from biocomposite of hydroxyapatite and polyhydroxy butyrate, a form of PHA, can be incorporated with the targeted tissue. The other methods for making a polymer scaffold, includes gas foaming, lyophilization, sol-gel, and solvent casting method. In this review, PHA as a sustainable eco-friendly NextGen biomaterial from bacterial sources especially Bacillus cereus, and its application for fabricating bone scaffold using different strategies for bone regeneration have been discussed.

Bio-based production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with modulated monomeric fraction in Escherichia coli

In this study, we applied metabolic engineering and bioprocessing strategies to enhance heterologous production of an important biodegradable copolymer, i.e., poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), with a modulated 3-hydroxyvalerate (3-HV) monomeric fraction from structurally unrelated carbon of glycerol in engineered Escherichia coli under different oxygenic conditions. We used our previously derived propanologenic (i.e., 1-propanol-producing) E. coli strain with an activated genomic Sleeping beauty mutase (Sbm) operon as a host for heterologous expression of the phaCAB operon. The 3-HV monomeric fraction was modulated by regulating dissimilated carbon flux channeling from the tricarboxylic acid (TCA) cycle into the Sbm pathway for biosynthesis of propionyl-CoA, which is a key precursor to (R)-3-hydroxyvaleryl-CoA (3-HV-CoA) monomer. The carbon flux channeling was regulated either by manipulating a selection of genes involved in the TCA cycle or varying oxygenic condition of the bacterial culture. With these consolidated strategies being implemented, we successfully achieved high-level PHBV biosynthesis with a wide range of 3-HV monomeric fraction from ~ 4 to 50 mol%, potentially enabling the fine-tuning of PHBV mechanical properties at the biosynthesis stage. We envision that similar strategies can be applied to enhance bio-based production of chemicals derived from succinyl-CoA. KEY POINTS: • TCA cycle engineering was applied to enhance 3-HV monomeric fraction in E. coli. • Effects of oxygenic conditions on 3-HV incorporation into PHBV in E. coli were investigated. • Bacterial cultivation for high-level PHBV production in engineered E. coli was performed.

Comparative genomics of Sphingopyxis spp. unravelled functional attributes

Members of genus Sphingopyxis are known to thrive in diverse environments. Genomes of 21 Sphingopyxis strains were selected. Phylogenetic analysis was performed using GGDC, AAI and core-SNP showed agreement at sub-species level. Based on our results, we propose that both S. baekryungensis DSM16222 and Sphingopyxis sp. LPB0140 strains should not be included under genus Sphingopyxis. Core-analysis revealed, 1422 genes were shared which included essential pathways and genes for conferring adaptation against stress environment. Polyhydroxybutyrate degradation, anaerobic respiration, type IV secretion were notable abundant pathways and exopolysaccharide, hyaluronic acid production and toxin-antitoxin system were differentially present families. Interestingly, genome of S. witflariensis DSM14551, Sphingopyxis sp. MG and Sphingopyxis sp. FD7 provided a hint of probable pathogenic abilities. Protein-Protein Interactome depicted that membrane proteins and stress response has close integration with core-proteins while aromatic compounds degradation and virulence ability formed a separate network. Thus, these should be considered as strain specific attributes.

Production of bioplastic through food waste valorization

The tremendous amount of food waste from diverse sources is an environmental burden if disposed of inappropriately. Thus, implementation of a biorefinery platform for food waste is an ideal option to pursue (e.g., production of value-added products while reducing the volume of waste). The adoption of such a process is expected to reduce the production cost of biodegradable plastics (e.g., compared to conventional routes of production using overpriced pure substrates (e.g., glucose)). This review focuses on current technologies for the production of polyhydroxyalkanoates (PHA) from food waste. Technical details were also described to offer clear insights into diverse pretreatments for preparation of raw materials for the actual production of bioplastic (from food wastes). In this respect, particular attention was paid to fermentation technologies based on pure and mixed cultures. A clear description on the chemical modification of starch, cellulose, chitin, and caprolactone is also provided with a number of case studies (covering PHA-based products) along with a discussion on the prospects of food waste valorization approaches and their economic/technical viability.