Insights into the applicability of microbial fuel cells in wastewater treatment plants for a sustainable generation of electricity

Critical analysis on the transformation and upgrading strategy of Chinese municipal wastewater treatment plants: Towards sustainable water remediation and zero carbon emissions

In the light of circular economy aspects, processing of large-scale municipal wastewater treatment plants (WWTPs) needs reconsideration to limit the overuse of energy, implement of non-green technologies and emit abundant greenhouse gas. Along with the huge increase in the worldwide population and agro-industrial activities, global environmental organizations have issued several recent roles to boost scientific and industrial communities towards sustainable development. Over recent years, China has imposed national and regional standards to control and manage the discharged liquid and solid waste, as well as to achieve carbon peaking and carbon neutrality. The aim of this report is to analyze the current state of Chinese WWTPs routing and related issues such as climate change and air pollution. The used strategies in Chinese WWTPs and upgrading trends were critically discussed. Several points were addressed including the performance, environmental impact, and energy demand of bio-enhanced technologies, including hydrolytic acidification pretreatment, efficient (toxic) strain treatment, and anaerobic ammonia oxidation denitrification technology, as well as advanced treatment technologies composed of physical and chemical treatment technologies, biological treatment technology and combined treatment technology. Discussion and critical analysis based on the current data and national policies were provided and employed to develop the future development trend of municipal WWTPs in China from the construction of sustainable and "Zero carbon" WWTPs.

Sequential anaerobic-aerobic treatment of rice mill wastewater and simultaneous power generation in microbial fuel cell

Microbial fuel cells (MFCs) have attracted widespread interest due to their capability to generate power while treating wastewater. In the present investigation, rice mill wastewater (RMW) was treated in a dual-chamber MFC with a biological cathode (MFCB), in which anaerobic treatment was provided in the anode compartment, and aerobic treatment was enployed in the cathode compartment. The performance was compared with an identical MFC with an abiotic cathode (MFCA). During continuous operation, the hydraulic retention time (HRT) of the anode compartments of both MFCs was kept at 12 h. The maximum volumetric power density obtained in MFCB (379.53 mW/m3) was lower than MFCA (791.72 mW/m3). Similarly, the maximum open-circuit voltage (OCV) and operating voltages were 0.519 V and 0.170 V for MFCB, while for the MFCA, they were 0.774 V and 0.251 V, respectively. The internal resistance of MFCA was 372.34 Ω while the MFCB showed a higher internal resistance of 533.89 Ω. The linear sweep voltammetry and cyclic voltammetry also demonstrated high electrochemical activity in MFCA compared to MFCB. However, MFCB has shown a higher chemical oxygen demand (COD) removal efficiency (96.8%) than MFCA (88.4%) under steady-state conditions. Both anaerobic and aerobic degradation of organic substrates significantly reduced the COD of RMW. Furthermore, the absence of an expensive catalyst in the cathode substantially reduces the cost of the system. The electrical performance of the system can be enhanced by employing novel cathode material with surface modification.

Customized Multichannel Measurement System for Microbial Fuel Cell Characterization

This work presents the development of an automatic and customized measuring system employing sigma-delta analog-to-digital converters and transimpedance amplifiers for precise measurements of voltage and current signals generated by microbial fuel cells (MFCs). The system can perform multi-step discharge protocols to accurately measure the power output of MFCs, and has been calibrated to ensure high precision and low noise measurements. One of the key features of the proposed measuring system is its ability to conduct long-term measurements with variable time steps. Moreover, it is portable and cost-effective, making it ideal for use in laboratories without sophisticated bench instrumentation. The system is expandable, ranging from 2 to 12 channels by adding dual-channel boards, which allows for testing of multiple MFCs simultaneously. The functionality of the system was tested using a six-channel setup, and the results demonstrated its ability to detect and distinguish current signals from different MFCs with varying output characteristics. The power measurements obtained using the system also allow for the determination of the output resistance of the MFCs being tested. Overall, the developed measuring system is a useful tool for characterizing the performance of MFCs, and can be helpful in the optimization and development of sustainable energy production technologies.

Platinum nanoparticles embedded into polyaniline on carbon cloth: improvement of oxygen reduction at cathode of microbial fuel cell used for conversion of medicinal plant wastes into bio-energy

A microbial fuel cell is a biological electrochemical system that extracts electrons stored in organic matter by oxidation using catalytic properties of microorganisms at bioanode. The major problem in such device, is however limited power production due to slow kinetic of oxygen reduction at cathode. It is worthwhile to develop new materials that fulfil these requirements. The polymerization of aniline onto carbon cloth for effective electrodeposition of platinum nanoparticles has been carried out by chronoamperometry and cyclic voltammetry. Three materials were thus elaborated, namely pristine carbon cloth, carbon cloth modified with platinum and carbon cloth modified by polymerization of aniline for immobilization of Pt-nanoparticles. The FTIR spectroscopy analysis revealed characteristic band located in 1720-1650 cm^-1, attributed to imine function, main component in skeleton of polymer PANI chain. The modified materials have been utilized as cathode in cell inoculated with medicinal plant wastes for improvement of oxygen reduction. Modified cathode with CC-PANI-Pt proved higher performances in all respects: increase of cell voltage from 338 to 765 mV and power density from 862 to 1510 mW/m² and abatement of COD of microbial inoculum leachate to 88%. Another feature of cell with modified cathode CC-PANI-Pt, was the enormous electric charge density harvested upon oxidation of 1 mL of acetate 7.62 C/cm² compared to that of cell with pristine CC cathode 0.54 C/cm². Nevertheless, coulombic efficiency for conversion of medicinal plant wastes into bioenergy was relatively lower 9%, making in evidence that elaborated electrochemical device was rather efficient and benificial environmentally than energetically.

Biotechnologies to Bridge the Schism in the Bioeconomy

Schism is the new normal for the bioeconomy concept. Since its proliferation in governments, the concept has been adapted to fit national or regional exigencies. Earlier this century the knowledge-based bioeconomy (KBBE) in Europe was seen as a technical and knowledge fix in the evolving sustainability landscape. At the OECD, the concept was further honed by imagining a future where biotechnologies contribute significantly to economic growth and development. Countries started to make national bioeconomy strategies. Some countries have diverged and made the bioeconomy both much larger and more general, involving a wide variety of sectors, such as industry, energy, healthcare, agriculture, aquaculture, forestry and fishing. Whatever the approach, what seems to be consistent is the need to reconcile environmental, social and economic sustainability. This paper attempts to establish one schism that could have ramifications for the future development of the bioeconomy. Some countries, including some of the largest economies but not exclusively so, are clearly following a biotechnology model, whereas others are clearly not. In the wake of the COVID-19 pandemic, biotechnologies offer outstanding potential in healthcare, although this sector is by no means included in all bioeconomy strategies. The paper also attempts to clarify how biotechnologies can address the grand challenges and the United Nations Sustainable Development Goals. The communities of scientists seem to have no difficulty with this, but citizens and governments find it more difficult. In fact, some biotechnologies are already well established, whereas others are emerging and more controversial.

Controlling the Carbon-Bio Interface via Glycan Functional Adlayers for Applications in Microbial Fuel Cell Bioanodes

Surface modification of electrodes with glycans was investigated as a strategy for modulating the development of electrocatalytic biofilms for microbial fuel cell applications. Covalent attachment of phenyl-mannoside and phenyl-lactoside adlayers on graphite rod electrodes was achieved via electrochemically assisted grafting of aryldiazonium cations from solution. To test the effects of the specific bio-functionalities, modified and unmodified graphite rods were used as anodes in two-chamber microbial fuel cell devices. Devices were set up with wastewater as inoculum and acetate as nutrient and their performance, in terms of output potential (open circuit and 1 kΩ load) and peak power output, was monitored over two months. The presence of glycans was found to lead to significant differences in startup times and peak power outputs. Lactosides were found to inhibit the development of biofilms when compared to bare graphite. Mannosides were found, instead, to promote exoelectrogenic biofilm adhesion and anode colonization, a finding that is supported by quartz crystal microbalance experiments in inoculum media. These differences were observed despite both adlayers possessing thickness in the nm range and similar hydrophilic character. This suggests that specific glycan-mediated bioaffinity interactions can be leveraged to direct the development of biotic electrocatalysts in bioelectrochemical systems and microbial fuel cell devices.

Promoting bacteria-anode interfacial electron transfer by palladium nano-complex in double chamber microbial fuel cell

The slow electron transfer between microbial outer membrane and electrode surface is considered one of the limitations of Microbial Fuel Cell (MFC) performance. The aim of the present work is to assess the role of palladium α-lipoic acid nanocomplex compound (PLAC) in promoting bacteria-anode interfacial electron transfer, by studying the dielectric properties of Shewanella oneidensis WW-1 cell membrane and its contribution to biofilm formation on the anode. The results showed that adding PLAC increased bacterial cell membrane permeability and outer cell surface charge. Exopolysaccharides (EPS) and surface-bound proteins increased 2.27 and 1.14 fold, respectively upon adding 0.25% v/v PLAC. Dynamic Light Scattering (DLS) showed uniform distribution of Shewanella-PLAC biocomposite size while Zeta potential and Fourier Transform Infrared (FTIR) Spectroscopy results suggest that PLAC diffused inside the cells. Transmission Electron Microscope (TEM) images reveal Exopolysaccharide (EPS) mat around the cells when PLAC was added to the cells, also confirmed by the FTIR spectrum. Scanning Electron Microscope and Atomic Force Microscope (AFM) confirmed the thickness of biofilm in the presence of PLAC. The average voltage reached 492 mV (external resistance 1 KΩ) over 35 days using 0.25% v/v PLAC as compared to a few hours in MFCs lacking PLAC. The results suggest that the addition of PLAC assisted in interfacial direct electron transfer through enhancing biofilm formation, moreover, its hydrophilic/lipophilic nature facilitated the electron shuttling process from within the bacterial cell to the electrode surface suggesting the involvement of mediated electron transfer as well.

Convenient non-invasive electrochemical techniques to monitor microbial processes: current state and perspectives

Real-time electrochemical monitoring in bioprocesses is an improvement over existing systems because it is versatile and provides more information to the user than periodic measurements of cell density or metabolic activity. Real-time electrochemical monitoring provides the ability to monitor the physiological status of actively growing cells related to electron transfer activity and potential changes in the proton gradient of the cells. Voltammetric and amperometric techniques offer opportunities to monitor electron transfer reactions when electrogenic microbes are used in microbial fuel cells or bioelectrochemical synthesis. Impedance techniques provide the ability to monitor the physiological status of a wide range of microorganisms in conventional bioprocesses. Impedance techniques involve scanning a range of frequencies to define physiological activity in terms of equivalent electrical circuits, thereby enabling the use of computer modeling to evaluate specific growth parameters. Electrochemical monitoring of microbial activity has applications throughout the biotechnology industry for generating real-time data and offers the potential for automated process controls for specific bioprocesses.

Tungsten oxide as electrocatalyst for improved power generation and wastewater treatment in microbial fuel cell

Microbial fuel cell (MFC) is a device that oxidizes the organic matter present in wastewater and simultaneously generates electricity from it. For practical applications, the power production of MFCs needs to be enhanced and the use of novel anode and cathode catalyst can certainly help in this regard. Such a novel catalyst, WO₃, was explored as both anode and cathode catalyst in this study. Performance of MFCs was enhanced when WO₃ was used as an electrocatalyst. The maximum power density of MFC was increased by five times when WO₃ was used as anode catalyst and by four times when it was used as cathode catalyst as compared to control MFC using electrode without any catalyst. Almost six times increment in maximum power production of MFC was observed when WO₃ was used as catalyst on both the electrodes. Electrochemical analysis of WO₃ also proved that it could enhance the current density of the modified electrode owing to its electrochemical catalytic properties. Furthermore, chemical oxygen demand (COD) removal of MFC having WO₃ coated electrodes was also observed to be higher, thus suggesting an overall enhancement in the performance of MFC by the use of WO₃ as an electrocatalyst.