Impact of initial sludge pH on enhancing the dewaterability of waste activated sludge by zero-valent iron-activated peroxydisulphate

Enhanced sludge dewaterability using a bifunctional hybrid coagulant

The combination of coagulation and addition of skeleton builder is a popular pretreatment method to improve the dewaterability of sludge. In this study, a novel bifunctional inorganic/organic hybrid coagulant (CS-Si@ATP) was designed and obtained by chemically coupling a cationic starch (CS) with a popular clay, that is, attapulgite (ATP), via a silane coupling agent (APTES) for one-step conditioning of sludge. CS-Si@ATP can evidently enhance the sludge dewatering performance compared with CS, ATP, and their simple combination due to the distinct dual functions of this hybrid coagulant. The tentacle-like cationic CS in CS-Si@ATP shows efficient charge neutralization effect to aggregate and precipitate the suspended solids for further formation of compact sludge cakes. Meanwhile, the internal ATP with a stable and rigid structure acts as the skeleton builder to notably improve the filterability and permeability of the sludge cakes. The synergistic effects of CS and ATP in CS-Si@ATP, i.e., the charge neutralization of CS and the skeleton construction of ATP, cause the evidently enhanced sludge dewaterability, with a filter cake moisture content approximately 78.30% after the mechanical dewatering at 0.05 MPa. In comparison with the traditional two-step combination process by separated addition of CS and ATP, the one-step addition of CS-Si@ATP can reduce the required ATP dose nearly an order of magnitude. Thus, CS-Si@ATP has the notable advantages of simple operation, efficient utilization of ATP and evident reduction of disposal cost. This study provides an environmentally friendly and cost-effective coagulant to further improve the dewaterability of sludge.

Degradation of rhodamine B by persulfate activated with green tea iron nanoparticles

Green iron tea nanoparticles (GT-Fe NPs) were used as persulfate(PS) activators to oxidize rhodamine B (RhB) in this study. Optimized oxidative degradation condition was 0.033 mM Fe, 5 mM PS at pH 3.0 and 298 K with an initial RhB content of 50 mg/L. After 120 min of RhB degradation utilizing GT-Fe NPs activated PS, 99% of RhB reduction was achieved, while 98% RhB reduction with PS activated by citric acid-Fe²⁺(CA-Fe) with the same amount of Fe²⁺. This RhB reduction was due to the delayed release of Fe(II) in the GT-Fe NPs. The addition of GT-Fe NPs enhanced the synthesis of OH· and SO₄^-· while inhibiting the formation of O₂^-·. A possible RhB degradation pathway was the chromophore destruction and ring-opening processes using GT-Fe NPs/PS, which produced a range of low molecular weight carboxylic acids (oxalic acid, lactic acid, acetic acid, and formic acid). GT-Fe NPs seem to be a promising persulfate activator in comparison to common activators such as CA-Fe.

Application of persulfate-based oxidation processes to address diverse sustainability challenges: A critical review

Over the past years, persulfate (PS) is widely applied due to their high versatility and efficacy in decontamination and sterilization. While treatment of organic chemicals, remediation of soil and groundwater, sludge treatment, disinfection on pathogen microorganisms have been covered by most published reviews, there are no comprehensive and specific reviews on its application to address diverse sustainability challenges, including solid waste treatment, resources recovery and regeneration of ecomaterials. PS applications mainly rely on direct oxidation by PS itself or the reactive sulfate radical (SO₄^•-) or hydroxyl radical (^•OH) from the activation of peroxodisulfate (PDS, S₂O₈^2-) or peroxymonosulfate (PMS, HSO₅^-) in SO₄^•--based advanced oxidation processes (SO₄^•--AOPs). From a broader perspective of environmental cleanup and sustainability, this review summarizes the various applications of PS except pollutant decontamination and elaborates the possible reaction mechanisms. Additionally, the differences between PS treatment and conventional technologies are highlighted. Challenges, research needs and future prospect are thus discussed to promote the development of the applications of PS-based oxidation processes in niche environmental fields. In all, this review is a call to pay more attention to the possibilities of PS application in practical resource reutilization and environmental protection except widely reported pollutant degradation.

Application of Advanced Oxidation Technology in Sludge Conditioning and Dewatering: A Critical Review

Sludge dewatering is an important link in sludge treatment. In practical engineering, the dewatering effect of unconditioned sludge is very poor. The use of advanced oxidation technology can improve sludge dewatering performance, reduce sludge capacity, and remove micro-pollutants, which is beneficial for sludge post-treatment and disposal. Based on the current status of sludge conditioning and dehydration, the characteristics of the advanced oxidation method for sludge dehydration were systematically explained using various free radical reaction mechanisms and dehydration conditions. The effects of various advanced oxidation technologies on sludge conditioning and dewatering has been extensively discussed. Finally, the application prospects of the advanced oxidation technology in sludge conditioning and dewatering are presented.

Simultaneously attenuating antibiotic resistance genes and improving the dewaterability of sewage sludge by conditioning with Fenton's reagent: the pivotal role of sludge pre-acidification

Fenton conditioning processes have been recently employed to improve the dewaterability of sewage sludge. However, it remains unclear whether the conditioning with Fenton's reagent would simultaneously attenuate antibiotic resistance genes (ARGs) in sludge and improve sludge dewaterability. It was found in the present study that sludge pre-acidification played a pivotal role in simultaneously removing ARGs and improving sludge dewaterability by conditioning with Fenton's reagent. When the sewage sludge was pre-acidified to pH = 3.0 and was then conditioned using Fenton's reagent, the absolute abundances of the total ARGs and the total mobile genic elements (MGEs) in conditioned sludge were reduced by 1.85-2.10 and 2.84-3.12 log units, respectively. Additionally, sludge capillary suction time (CST) and specific resistance to filtration (SRF) were drastically reduced, and the moisture content (MC) in dewatered sludge cake was reduced to only 60.61-69.95%. Such effective attenuation of ARGs and MGEs in conditioned sludge led to their removal in both the dewatered sludge cakes and dewatering filtrate. However, only the improvement of sludge dewaterability was attained by sludge conditioning with Fenton's reagent but without sludge pre-acidification. During the conditioning treatment, the removal of loosely bound extracellular polymeric substance (EPS) and tightly bound EPS in conditioned sludge contributed to the improvement of sludge dewaterability, and the damage of sludge microbial cells was highly correlated with the attenuation of antibiotic resistance. Thus, sludge pre-acidification combined with conditioning using Fenton's reagent can be employed to simultaneously attenuate the antibiotic resistance in sewage sludge and improve sludge dewaterability.

DETA impregnated attapulgite hybrid ZIF-8 composite as an adsorbent for the adsorption of aspirin and ibuprofen in aqueous solution

The diethylenetriamine (DETA) impregnated modified attapulgite hybrid ZIF-8 composite is a new type of amine impregnated hybrid MOF adsorbent, which has an excellent ability to remove aspirin and ibuprofen from aqueous solution.