Production of bioflocculant from Klebsiella pneumoniae: evaluation of fish waste extract as substrate and flocculation performance

Production and characterization of efficient bioflocculant in high-turbidity drinking water treatment: Identification of flocculation-related genes

Bioflocculants are eco-friendly water treatment agents produced by bioflocculant-producing strains that are valuable in drinking water turbidity removal. The major challenges in the application of bioflocculants include low flocculation efficiency, high production costs, and unclear flocculation-related genes. In this study, Pseudomonas sp. ZC-41 a highly efficient bioflocculant-producing strain, was isolated from activated sludge to produce polysaccharide-based bioflocculant MBF-ZC with 94.12% flocculation efficiency under more economical culture conditions, which can solve the problem of low flocculation efficiency. Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) confirmed MBF-ZC contained hydroxyl, carboxyl, and amine groups, crucial for flocculation via adsorption bridging effects as the main flocculation mechanism. The 2393 differentially expressed genes (DEGs) in the transcriptome of strain ZC-41 were classified into five co-expression modules, and the turquoise module was associated with flocculation efficiency and bioflocculant yield. Nineteen flocculation-related genes were identified by combining functional pathways related to sugars. In addition, response surface methodology was optimized to achieve the efficiency of 93.57% for turbidity removal from high-turbidity water by bioflocculant. The results not only provide a solid theoretical foundation to solve the challenges of bioflocculants, but also enrich strategies for high-turbidity drinking water treatment.

Isolation and characterization of novel cadmium-resistant Escherichia fergusonii ZSF-15 from industrial effluent for flocculant production and antioxidant enzyme activity

Cadmium (Cd) is a highly toxic metal that frequently contaminates our environment. In this study, the bioflocculant-producing, cadmium-resistant Escherichia fergusonii ZSF-15 was characterized from Paharang drain, Bawa Chak, Faisalabad, Pakistan. The Cd-resistant E. fergusonii was used to determine the bioflocculant production using yeast-peptone-glycerol medium (pH 6.5) supplemented with 50 mg L-1 of Cd. The culture was incubated for 3 days at 37 °C in a rotary shaker at 120 rpm. The fermentation broth was centrifuged at 4000 g for 10 min after the incubation period. The maximum flocculating activity by isolate ZSF-15 was found to be 71.4% after 48 h of incubation. According to the Fourier transform infrared spectroscopy analysis, the bioflocculant produced by strain ZSF-15 was comprised of typical polysaccharide and protein, i.e. hydroxyl, carboxyl, and amino groups. The strain ZSF-15 exhibited bioflocculant activity at range of pH (6-8) and temperature (35-50℃). Maximum flocculation activity (i.e. 71%) was observed at 47℃, whereas 63% flocculation production was observed at pH 8. In the present study, antioxidant enzyme profile of ZSF-15 was also evaluated under cadmium stress. A significant increase in antioxidant enzymes including superoxide dismutase (118%) and ascorbate peroxidase (28%) was observed, whereas contents of catalase (86%), glutathione transferase (13%), and peroxidase (8%) were decreased as compared to control.

Application of xanthan gum as coagulant-aid for decolorization of synthetic Congo red wastewater

In recent years, utilization of polysaccharides as natural coagulant and coagulant-aid has become a topic of interest, due to the nature of biopolymers that are renewable, biodegradable, and non-toxic. In this study, Congo red, as a model dye substance, was treated using polyaluminium chloride (PAC) as the main coagulant and xanthan gum as the coagulant aid. For this purpose, the effect of pH (3-9), xanthan gum dose (0.5-4 mg/L), and the initial concentration of Congo red dye (50-100 mg/L) to the dye removal and sludge volume were investigated. The outcome of this investigation indicates that the best pH for Congo red coagulation occurred at pH 3, due to the charge neutralization mechanism. The addition of coagulant-aid dose increases the %-removal and sludge volume until reaching the best coagulant-aid dose of 2 mg/L that results in a %-removal value of 93.81% and a sludge volume of 23.5 mL/L. Further addition of xanthan gum reduced the %-removal and sludge volume due to the inter-polymer force causing more difficult floc formation. The best initial concentration of dye occurred at a Congo red concentration of 50 mg/L, with a %-removal value of 93.81% with PAC (15 mg/L) and xanthan gum (2 mg/L) coagulants. This value is considerably higher than PAC and xanthan gum only which amounts to 81.16 and 7.18%, respectively. Based on these results, it is apparent that xanthan gum can positively contribute to dye coagulation while reducing the use of harmful inorganic coagulant.

Removal of Malachite Green using carbonized material derived from disposable facemasks: optimization of removal process through Box-Behnken design

Water resources are being heavily contaminated due to the huge load of toxic pollutants released by industrial activities. Among various physical and chemical methods, adsorption is considered as a promising method for rapidly removing contaminants from wastewater. In the present study, a novel carbon-based adsorbent was prepared through controlled pyrolysis of disposable facemasks. The properties of carbonized compound (CC) were characterized by FTIR, XRD, SEM and EDX. The pollutant removal efficiency of CC was initially investigated with synthetic dyes Malachite Green (MG) and Congo Red (CR). The peaks observed in FTIR spectra corresponding to C=O and C=C and C-N functional groups on adsorbed CC surface confirm the interaction between dye and CC. The XRD spectra of CC showed strong peaks at 2θ = 26.629, 27.488, 27.810 and 29.404 which correspond to the disordered graphitic plane. The SEM images of CC showed good porosity nature. A quadratic model was developed through response surface methodology by conducting a series of Box-Behnken design experiments. Adequacy of this model variables was ensured by ANOVA tests at P-value <0.05. The lower P-value (<0.0001) and higher F-value (44.54) of the quadratic model showed it was a significant model for dye removal. Finally, the optimal condition to obtain maximum MG removal (rate >99%) was identified by desirability function as CC 1000 and MG 212 mg/L and adsorption time 180 min. Adsorption kinetic study indicates that a pseudo second-order kinetic model showed the best fit with R²=  0.999.