The Speciation of Aluminum in Environmental Samples

High aluminum content in bone of marine mammals and its relation with source levels and origin

Although aluminum is widely distributed in the earth's crust, its environmental availability and wildlife assimilation rates are only partially known. Here we analyze aluminum concentrations in bone from 10 species of marine mammals inhabiting 3 geographic areas subject to different aluminum inputs: the Río de la Plata estuary (Uruguay), the coastal waters of Mauritania and the Galapagos archipelago (Ecuador). Overall, concentrations were unusually high as compared to those of terrestrial animals, with lowest concentrations in the Galapagos archipelago, then the Río de la Plata estuary and finally Mauritania. The aluminum source varied between regions, prevailing anthropogenic sources in the Río de la Plata Estuary and natural sources (wind-blown dust) in Mauritanian waters. The type of source determined contamination levels: anthropogenic sources were most significant for coastal species and showed a decline with distance of habitat from shoreline, while natural sources had a higher influence on open waters because of the dearth of biogenic silica that eliminates aluminum from the water column. Since aluminum remains in bone for several decades, marine mammal bone reflects historical levels of aluminum and therefore is a good bioindicator of the aluminum concentration of the marine environment.

Enhanced acidogenic fermentation from Al-rich waste activated sludge by combining lysozyme and sodium citrate pretreatment: Perspectives of Al stabilization and enzyme activity

The accumulation of poly aluminum chloride (PAC) in dewatered waste activated sludge (WAS) can cause severe Al pollution and significantly reduce the production of volatile fatty acids (VFAs) from anaerobic fermentation. Herein, the combination of lysozyme and sodium citrate pretreatment was applied to stabilize the aluminum and enhance the VFAs production via anaerobic fermentation. The complexation and stabilization of aluminum by the citrate was efficient, which is conducive to relieving the inhibition of aluminum on lysozymes and other extracellular hydrolases. Compared with the control group, the lysozyme, protease and α-glucosidase activities were obtained at 1.86, 1.72, and 1.15 times, respectively, following the pretreatment. 129.71 mg/g volatile suspended solids (VSS) of soluble proteins and 26.3 mg/g VSS of polysaccharides were obtained within 4 h, together with the degradation of 124 % more proteins and 75 % more polysaccharides within three days. This provided a sufficient number of substrates for VFA production. 588.4 mg COD/g VSS of total VFAs were obtained after the six-day anaerobic fermentation from Al-rich WAS following the combination of lysozyme and sodium citrate pretreatment, which was 7.3 times higher than that of the control group. This study presents a novel approach for enhancing VFA production in anaerobic fermentation as well as reducing risk of Al hazards from Al-rich WAS.

Mobilization of colloids during sediment resuspension and its effect on the release of heavy metals and dissolved organic matter

Natural colloids are important in mobilizing pollutants in aquatic environments. This study investigated the mobilization and aggregation of natural colloids during the sediment resuspension and re-sedimentation processes using nanoparticle tracking analysis. The metals and organic matter in overlying water were divided and examined in dissolved (<0.45 μm), colloidal (3 kDa - 0.45 μm), and truly dissolved (<3 kDa) forms. Excitation emission matrix-parallel factor analysis (EEM-PARAFAC) was used to characterize the dissolved organic matter (DOM). In overlying water, most natural colloids were < 200 nm before resuspension. An evident mobilization of colloids and an increase in colloid size were observed during resuspension. The formation of particles (>0.45 μm) and decreases of small colloids (<200 nm) indicated that resuspension promoted the aggregation of colloids. Mobilization of colloids was accompanied by increases in concentrations of Fe, Al, and organic carbon in colloidal fractions, which could be related to the formation of mineral-organic complexes under an oxic environment. The release of DOM from sediments mainly contributed to the truly dissolved humic-like fraction, and colloidal organic carbon accounted for, on average, 20 % of the total dissolved organic carbon (DOC). Fe and Al had the highest colloidal proportions as they are major compositions of inorganic colloids. Substantial removal of dissolved Al, Fe, Pb, and Zn occurred when colloids aggregated in the overlying water. Although the adsorption of suspended particles may also decrease the concentrations of dissolved metals, the increased proportions of colloidal metals indicated a possible role of colloids in this process. These findings provide insight into the behavior of colloids during the resuspension process and indicate that the aggregation of colloids could promote the removal of dissolved matter.

Preliminary Evidence That Fiji Water Has Protective Effects against Aluminum Toxicity in Honey Bees (Apis mellifera)

Researchers have determined that bioavailable aluminum chloride (AlCl3) may affect honey bee behavior (e.g., foraging patterns and locomotion) and physiology (e.g., abdominal spasms). The purpose of these experiments was to determine if Fiji water reduces the impacts of AlCl3 toxicity in bees by measuring circadian rhythmicity (number of times bees crossed the centerline during the day and night), average daily activity (average number of times bees crossed the centerline per day), and mortality rates (average number of days survived) using an automated monitor apparatus. Overall, the AlCl3 before and after Fiji groups had significantly higher average daily activity and rhythmicity rates compared to their respective AlCl3 before and after deionized water (DI) groups. One of the AlCl3 before DI groups exhibited no difference in rhythmicity rates compared to its respective AlCl3 after Fiji group. Overall, these results suggest that Fiji water might exert protective effects against AlCl3. The AlCl3 groups paired with Fiji water had higher activity and rhythmicity levels compared to the AlCl3 groups paired with DI. It is important for researchers to continue to study aluminum and possible preventatives for aluminum uptake.

Honey bee (Apis mellifera ligustica) acetylcholinesterase enzyme activity and aversive conditioning following aluminum trichloride exposure

Background

Aluminum is the third most prevalent element in the earth’s crust. In most conditions, it is tightly bound to form inaccessible compounds, however in low soil pH, the ionized form of aluminum can be taken up by plant roots and distributed throughout the plant tissue. Following this uptake, nectar and pollen concentrations in low soil pH regions can reach nearly 300 mg/kg. Inhibition of acetylcholinesterase (AChE) has been demonstrated following aluminum exposure in mammal and aquatic invertebrate species. In honey bees, behaviors consistent with AChE inhibition have been previously recorded; however, the physiological mechanism has not been tested, nor has aversive conditioning.

Results

This article presents results of ingested aqueous aluminum chloride exposure on AChE as well as acute exposure effects on aversive conditioning in an Apis mellifera ligustica hive. Contrary to previous findings, AChE activity significantly increased as compared to controls following exposure to 300 mg/L Al3+. In aversive conditioning studies, using an automated shuttlebox, there were time and dose-dependent effects on learning and reduced movement following 75 and 300 mg/L exposures.

Conclusions

These findings, in comparison to previous studies, suggest that aluminum toxicity in honey bees may depend on exposure period, subspecies, and study metrics. Further studies are encouraged at the moderate-high exposure concentrations as there may be multiple variables that affect toxicity which should be teased apart further.

Sorption of Perfluorooctane sulfonate (PFOS) including its isomers on hydrargillite as a function of pH, humic substances and Na2SO4

Perfluorooctane sulfonate (PFOS) is a persistent organic pollutant (POP) and emergent contaminant that are widespread in the environment. Understanding the mechanisms controlling the distribution of PFOS and its isomers between hydrargillite and the water phase is important in order to study their redistribution and mobility in the environment. This study investigated the effects of pH, humic acid, fulvic acid and Na₂SO₄ on sorption of PFOS isomers to hydrargillite. A mixture of PFOS isomers was spiked into water and hydrargillite was added to the system and shaken for one day; the system was tested with different aqueous composition. Concentrations of PFOS isomers in the aqueous phase were quantified using an ultra-performance liquid chromatograph coupled to a triple quadrupole mass spectrometer. Our results showed that the distribution coefficients of PFOS isomers were found to be 0.76, 0.71, 0.93 and 0.90 at pH 6.5, for 3-/4-/5- PFOS, 6-/2-PFOS, L-PFOS and total PFOS respectively. The distribution coefficients increased at lower pH and decreased at alkaline conditions. The presence of humic substances (HS) increased the sorption slightly at the environmental pH of 6.5, although a competition effect was observed during acidic conditions. A tendency of PFOS distribution to hydrargillite in the presence of Na₂SO₄ was like its behavior in the presence of HS although the mechanisms behind the sorption were interpreted differently. This study revealed that L-PFOS was readily sorbed when no other chemicals were added or in 20 mg/L FA or 100 mg/L Na₂SO₄. We suggest that an increase in PFOS sorption in the presence of HS may be due to hydrophobic mechanisms while Na₂SO₄ contributed to increased sorption through ionic strength effects.

Five Aluminum Seasonality Regimes Identified in Chronically Acidified Rivers of Nova Scotia

Despite reductions in acidic deposition, high freshwater Al concentrations continue to threaten acidified ecosystems across the northern hemisphere. Seasonally elevated Al concentrations may pose a particular threat to freshwater organisms. Despite this threat, there is a lack of understanding about the timing and drivers of seasonal Al fluctuations. Here, we address this knowledge gap by identifying seasonal patterns of Al and their drivers in 16 rivers across Nova Scotia, Canada. We identify five distinct Al regimes with different timing of seasonally elevated Al concentrations. Regimes are distinguished by correlation strength and direction between Al and base cations, total organic carbon, turbidity, and discharge. Most notably, regimes are distinguished by a gradient of Al-base cation decoupling as Ca and Mg concentration approaches 1.4 mg L^-1 and 0.6 mg L^-1, respectively. Seasonally elevated Al concentrations exceeded the 0.1-0.2 mg L^-1 World Health Organization drinking water guidelines in all regimes, and inorganic monomeric Al is projected to exceed the 15 μg L^-1 threshold for aquatic health in most rivers. This research highlights the complexity of seasonal Al dynamics and the importance of understanding seasonal variation of Al to quantify the impact of Al on human health, water treatment, and aquatic organisms.

Aluminum distribution heterogeneity and relationship with nitrogen, phosphorus and humic acid content in the eutrophic lake sediment

Increasing amount of aluminum (Al) gets into aquatic ecosystem through anthropogenic activity, but the knowledge about Al migration and relationships with sediments possessing different physico-chemical properties in eutrophic lakes is limited. Here, the Al migration rule and relationships with sediment nutritions in the Hangzhou West Lake, China was investigated, where a certain amount of residual Al-salts can enter because of the pre-treatment of the Qiantang River diversion project every day. Results revealed the obvious spatial distribution heterogeneity of Al in sediment vertical direction and horizontal direction following water flow. The Al content in sediment ranged 0.463-1.154 g kg^-1 in Maojiabu Lake, and ranged 9.862-40.442 g kg^-1 in Xiaonanhu Lake. Higher Al content distributed in upper layer sediment in lake with more disturbance. Total nitrogen (TN) contents were higher 0.917-3.387 mg g^-1 and 0.627-0.786 mg g^-1 in upper layer sediment than that in lower layer in Maojiabu Lake and Xiaonanhu Lake, respectively. Total phosphorus (TP) content ranged 0.779-2.580 mg g^-1, in which IP and Fe/Al-P contributed 24.9-80.8% and 17.0-51.6%, respectively. Correlations between Al content with nutrition, humic acid (HA) etc. of sediment regionally varied in Maojiabu and Xiaonanhu Lake. Spatial distribution of Al-salt in eutrophic lakes closely related with the physico-chemical characteristics of nutrients, humus, human disturbance and water division parameters. Results provides new insight into Al-salts migration and references for Al-risk evaluating in eutrophic lakes.

Honey bees (Apis mellifera spp.) respond to increased aluminum exposure in their foraging choice, motility, and circadian rhythmicity

Aluminum is increasingly globally bioavailable with acidification from industrial emissions and poor mining practices. This bioavailability increases uptake by flora, contaminating products such as fruit, pollen, and nectar. Concentrations of aluminum in fruit and pollen have been reported between 0.05 and 670mg/L in North America. This is particularly concerning for pollinators that ingest pollen and nectar. Honey bees represent a globally present species experiencing decline in Europe and North America. Region specific decline may be a result of differential toxicity of exposure between subspecies. We find that European honey bees (Apis mellifera mellifera) may have differential toxicity as compared to two allopatric Mediterranean subspecies (Apis mellifera carnica and Apis mellifera caucasica) which showed no within subspecies exposure differences. European honey bees were then used in a laboratory experiment and exposed to aluminum in their daily water supply to mimic nectar contamination at several concentrations. After approximately 3 weeks of aluminum ingestion these bees showed significantly shorter captive longevity than controls at concentrations as low as 10.4mg/L and showed a possible hormetic response in motility. We also compared European honey bees to Africanized/European hybrid bees (Apis mellifera mellifera/scutellata hybrid) in short-term free-flight experiments. Neither the European honey bee nor the hybrid showed immediate foraging deficits in flight time, color choice, or floral manipulation after aluminum exposure. We conclude that European honey bees are at the greatest risk of aluminum related decline from chronic ingestion as compared to other subspecies and offer new methods for future use in honey bee toxicology.

Beneficial effects of aluminum enrichment on nitrogen-fixing cyanobacteria in the South China Sea

Few studies focus on the effects of aluminum (Al) on marine nitrogen-fixing cyanobacteria, which play important roles in the ocean nitrogen cycling. To examine the effects of Al on the nitrogen-fixing cyanobacteria, bioassay experiments in the oligotrophic South China Sea (SCS) and culture of Crocosphaera watsonii in the laboratory were conducted. Field data showed that 200 nM Al stimulated the growth and the nitrogenase gene expression of Trichodesmium and unicellular diazotrophic cyanobacterium group A, and the nitrogen fixation rates of the whole community. Laboratory experiments demonstrated that Al stimulated the growth and nitrogen fixation of C. watsonii under phosphorus limited conditions. Both field and laboratory results indicated that Al could stimulate the growth of diazotrophs and nitrogen fixation in oligotrophic oceans such as the SCS, which is likely related to the utilization of phosphorus, implying that Al plays an important role in the ocean nitrogen and carbon cycles by influencing nitrogen fixation.

Sequestration of Aluminium(III) by different natural and synthetic organic and inorganic ligands in aqueous solution

The speciation of Al³⁺ in aqueous solutions containing organic and inorganic ligands important from a biological (citrate (Cit^3-), gluconate (Gluc^-), lactate (Lac^-), silicate (H₂SiO₄^2-), carbonate (CO₃^2-), fluoride (F^-)) and industrial (Gantrez^®; polymethyl-vinyl-ether-co-maleic acids; GTZ S95 and GTZ AN169) point of view is reported. The stability constants of Al³⁺/L^z- complexes (L^z- = ligand with z^- charge) were determined by potentiometry at T = 298.15 K and 0.10 ≤ I/M ≤ 1.00 in NaCl_(aq) (in NaNO_3(aq) only for Al³⁺/GTZ S95 and Al³⁺/Gluc^- acid systems). For Al³⁺/Cit^3-, Al³⁺/Lac^- and Al³⁺/GTZ AN169^4- systems, the investigations were also carried out at 283.15 ≤ T/K ≤ 318.15. The dependence of the thermodynamic parameters on ionic strength and temperature was modelled with a Debye-Hückel type equation. Different speciation schemes of Al³⁺/L^z- systems were obtained, including protonated, simple metal-ligand, polynuclear and hydrolytic mixed species. At I → 0 M and T = 298.15 K the stability trend for the AlL^(3-z) species is: 14.28 ± 0.02, 13.99 ± 0.03, 10.16 ± 0.03, 3.16 ± 0.08, 2.84 ± 0.10 for GTZ S95, GTZ AN169, Cit^3-, Gluc^- and Lac^-, respectively. From the investigations at different temperatures, it results that the entropic contribution is the driving force of the reactions. The sequestering ability of the ligands towards Al³⁺ was investigated determining the pL_0.5 parameter at different experimental conditions, finding the following trend: Cit^3- » Gluc^- > GTZ S95^4- > GTZ AN169^4- > Lac^- for the organic ligands, and pL_0.5: F^- » CO₃^2- > H₂SiO₄^2- for the inorganic ones.

The effects of ingested aqueous aluminum on floral fidelity and foraging strategy in honey bees (Apis mellifera)

Pollinator decline is of international concern because of the economic services these organisms provide. Commonly cited sources of decline are toxicants, habitat fragmentation, and parasites. Toxicant exposure can occur through uptake and distribution from plant tissues and resources such as pollen and nectar. Metals such as aluminum can be distributed to pollinators and other herbivores through this route especially in acidified or mined areas. A free-flying artificial flower patch apparatus was used to understand how two concentrations of aluminum (2mg/L and 20mg/L) may affect the learning, orientation, and foraging behaviors of honey bees (Apis mellifera) in Turkey. The results show that a single dose of aluminum immediately affects the floral decision making of honey bees potentially by altering sucrose perception, increasing activity level, or reducing the likelihood of foraging on safer or uncontaminated resource patches. We conclude that aluminum exposure may be detrimental to foraging behaviors and potentially to other ecologically relevant behaviors.

Aluminium uptake and translocation in Al hyperaccumulator Rumex obtusifolius is affected by low-molecular-weight organic acids content and soil pH

BACKGROUND AND AIMS

High Al resistance of Rumex obtusifolius together with its ability to accumulate Al has never been studied in weakly acidic conditions (pH > 5.8) and is not sufficiently described in real soil conditions. The potential elucidation of the role of organic acids in plant can explain the Al tolerance mechanism.

METHODS

We established a pot experiment with R. obtusifolius planted in slightly acidic and alkaline soils. For the manipulation of Al availability, both soils were untreated and treated by lime and superphosphate. We determined mobile Al concentrations in soils and concentrations of Al and organic acids in organs.

RESULTS

Al availability correlated positively to the extraction of organic acids (citric acid < oxalic acid) in soils. Monovalent Al cations were the most abundant mobile Al forms with positive charge in soils. Liming and superphosphate application were ambiguous measures for changing Al mobility in soils. Elevated transport of total Al from belowground organs into leaves was recorded in both lime-treated soils and in superphosphate-treated alkaline soil as a result of sufficient amount of Ca available from soil solution as well as from superphosphate that can probably modify distribution of total Al in R. obtusifolius as a representative of "oxalate plants." The highest concentrations of Al and organic acids were recorded in the leaves, followed by the stem and belowground organ infusions.

CONCLUSIONS

In alkaline soil, R. obtusifolius is an Al-hyperaccumulator with the highest concentrations of oxalate in leaves, of malate in stems, and of citrate in belowground organs. These organic acids form strong complexes with Al that can play a key role in internal Al tolerance but the used methods did not allow us to distinguish the proportion of total Al-organic complexes to the free organic acids.

Influence of leaching conditions for ecotoxicological classification of ash

The Waste Framework Directive (WFD; 2008/98/EC) states that classification of hazardous ecotoxicological properties of wastes (i.e. criteria H-14), should be based on the Community legislation on chemicals (i.e. CLP Regulation 1272/2008). However, harmonizing the waste and chemical classification may involve drastic changes related to choice of leaching tests as compared to e.g. the current European standard for ecotoxic characterization of waste (CEN 14735). The primary aim of the present study was therefore to evaluate the influence of leaching conditions, i.e. pH (inherent pH (∼10), and 7), liquid to solid (L/S) ratio (10 and 1000 L/kg) and particle size (<4 mm, <1 mm, and <0.125 mm), for subsequent chemical analysis and ecotoxicity testing in relation to classification of municipal waste incineration bottom ash. The hazard potential, based on either comparisons between element levels in leachate and literature toxicity data or ecotoxicity testing of the leachates, was overall significantly higher at low particle size (<0.125 mm) as compared to particle fractions <1mm and <4mm, at pH 10 as compared to pH 7, and at L/S 10 as compared to L/S 1000. These results show that the choice of leaching conditions is crucial for H-14 classification of ash and must be carefully considered in deciding on future guidance procedures in Europe.

Improved understanding of key elements governing the toxicity of energy ash eluates

Ash from incinerated waste consists mainly of a complex mixture of metals and other inorganic elements and should be classified based on its inherent hazardous effects according to EUs Waste Framework Directive. In a previous study, we classified eight eluates from ash materials from Swedish incineration plants, both chemically and ecotoxicologically (using bacteria, algae, crustacean and fish). Based on measured concentrations in the eluates together with literature acute toxicity data on the crustacean Nitocra spinipes we identified six elements (i.e. Zn, Cu, Pb, Al, K and Ca) potentially responsible for the observed ecotoxicity. However, comparing the used test methods with N. spinipes, the acute test was relatively insensitive to the eluates, whereas the (sub)chronic test (i.e. a partial life cycle test, investigating larval development ratio) was very sensitive. The overall aim of this follow-up study was to verify if the pinpointed elements could be responsible for the observed (sub)chronic toxicity of the eluates. Individual effect levels (i.e. NOEC values) for these six elements were therefore generated using the (sub)chronic test. Our results show that for six of the eight eluates, the observed ecotoxicity can be explained by individual elements not classified as ecotoxic (Al, K and Ca) according to chemical legislation. These elements will not be considered using summation models on elements classified as ecotoxic in solid material for the classification of H-14, but will have significant implications using ecotoxicological test methods for this purpose.

DGT measurement of dissolved aluminum species in waters: comparing Chelex-100 and titanium dioxide-based adsorbents

Aluminum is acutely toxic, and elevated concentrations of dissolved Al can have detrimental effects on both terrestrial and aquatic ecosystems. Robust analytical methods that can determine environmentally relevant Al fractions accurately and efficiently are required by the environmental monitoring community. A simple, robust passive sampling method, the diffusive gradients in thin films (DGT) technique, was evaluated for the measurement of dissolved Al species in freshwater and marine water using either Chelex-100 or Metsorb (a titanium dioxide-based binding agent) as the adsorbent. Mass vs time DGT deployments at pH 5.05 (Al(3+) and Al(OH)(2+) dominate) and 8.35 (Al(OH)(4)(-) dominates) demonstrated linear uptake of Al (R(2) = 0.989 and 0.988, respectively) for Metsorb. Similar deployments of Chelex-DGT showed linear uptake at pH 5.05 (R(2) = 0.994); however, at pH 8.35 the mass of Al accumulated was 40-70% lower than predicted, suggesting that Chelex-100 is not suitable for Al measurements at high pH. The Metsorb-DGT measurement was independent of pH (5.0-8.5) and ionic strength (0.001-0.7 mol L(-1) NaNO(3)), whereas the Chelex-DGT measurement was only independent of ionic strength at pH 5.0. At pH 8.4, increasing ionic strength led to considerable underestimation (up to 67%) of Al concentration. Deployments of Metsorb-DGT (up to 4 days) in synthetic freshwater (pH range 5.4-8.1) and synthetic seawater (pH 8.15) resulted in linear mass uptakes, and the concentration measured by DGT agreed well with solution concentrations. Conversely, deployment of Chelex-DGT in synthetic seawater and freshwater (pH ≥7.7 Al(OH)(4)(-) dominant species) resulted in a decrease in accumulated mass with increasing deployment time. In situ field evaluations in fresh, estuarine, and marine waters confirmed that Metsorb-DGT was more accurate than Chelex-DGT for the measurement of dissolved Al in typical environmental waters.

Density functional theory studies on the structures and water-exchange reactions of aqueous Al(III)-oxalate complexes

The structures and water-exchange reactions of aqueous aluminum-oxalate complexes are investigated using density functional theory. The present work includes (1) The structures of Al(C(2)O(4))(H(2)O)(4)(+) and Al(C(2)O(4))(2)(H(2)O)(2)(-) were optimized at the level of B3LYP/6-311+G(d,p). The geometries obtained suggest that the Al-OH(2) bond lengths trans to C(2)O(4)(2-) ligand in Al(C(2)O(4))(H(2)O)(4)(+) are much longer than the Al-OH(2) bond lengths cis to C(2)O(4)(2-). For Al(C(2)O(4))(2)(H(2)O)(2)(-), the close energies between cis and trans isomers imply the coexistence in aqueous solution. The (27)Al NMR and (13)C NMR chemical shifts computed with the consideration of sufficient solvent effect using HF GIAO method and 6-311+G(d,p) basis set are in agreement with the experimental values available, indicating the appropriateness of the applied models; (2) The water-exchange reactions of Al(III)-oxalate complexes were simulated at the same computational level. The results show that water exchange proceeds via dissociative pathway and the activation energy barriers are sensitive to the solvent effect. The energy barriers obtained indicate that the coordinated H(2)O cis to C(2)O(4)(2-) in Al(C(2)O(4))(H(2)O)(4)(+) is more labile than trans H(2)O. The water-exchange rate constants (k(ex)) of trans- and cis-Al(C(2)O(4))(2)(H(2)O)(2)(-) were estimated by four methods and their respective characteristics were explored; (3) The significance of the study on the aqueous aluminum-oxalate complexes to environmental chemistry is discussed. The influences of ubiquitous organic ligands in environment on aluminum chemistry behavior can be elucidated by extending this study to a series of Al(III)-organic system.

Density functional theory study on aqueous aluminum-fluoride complexes: exploration of the intrinsic relationship between water-exchange rate constants and structural parameters for monomer aluminum complexes

Density functional theory (DFT) calculation is carried out to investigate the structures, (19)F and (27)Al NMR chemical shifts of aqueous Al-F complexes and their water-exchange reactions. The following investigations are performed in this paper: (1) the microscopic properties of typical aqueous Al-F complexes are obtained at the level of B3LYP/6-311+G**. Al-OH(2) bond lengths increase with F(-) replacing inner-sphere H(2)O progressively, indicating labilizing effect of F(-) ligand. The Al-OH(2) distance trans to fluoride is longer than other Al-OH(2) distance, accounting for trans effect of F(-) ligand. (19)F and (27)Al NMR chemical shifts are calculated using GIAO method at the HF/6-311+G** level relative to F(H(2)O)(6)(-) and Al(H(2)O)(6)(3+) references, respectively. The results are consistent with available experimental values; (2) the dissociative (D) activated mechanism is observed by modeling water-exchange reaction for [Al(H(2)O)(6-i)F(i)]((3-i)+) (i = 1-4). The activation energy barriers are found to decrease with increasing F(-) substitution, which is in line with experimental rate constants (k(ex)). The log k(ex) of AlF(3)(H(2)O)(3)(0) and AlF(4)(H(2)O)(2)(-) are predicted by three ways. The results indicate that the correlation between log k(ex) and Al-O bond length as well as the given transmission coefficient allows experimental rate constants to be predicted, whereas the correlation between log k(ex) and activation free energy is poor; (3) the environmental significance of this work is elucidated by the extension toward three fields, that is, polyaluminum system, monomer Al-organic system and other metal ions system with high charge-to-radius ratio.