Mineral oil in food, cosmetic products, and in products regulated by other legislations

Lipid-based eye drop formulations for the management of evaporative dry eyes

Dry eye disease is a progressive prevalent ocular surface disorder that arises from various factors and is characterized by insufficient quality and/or quantity of tears. The underlying pathophysiology is intricate and can progress to chronic, difficult-to-treat conditions. Multiple strategies and therapeutic approaches are utilized in its management that target one or more etiopathological components of dry eyes, which may include aqueous tear deficiency or evaporative dry eyes. The primary focus of this paper is on treatment alternatives that utilize lipids for the treatment of evaporative dry eyes. This may arise from either abnormal lipid production or inadequate lipid spreading caused by meibomian gland dysfunction. The hypothesis behind the development of these lipid-containing eye drops is that if they can imitate the lipid layer, they may be able to help in the management of the signs and symptoms of evaporative dry eyes. The lipids used in commercial formulations for dry eyes are mineral oil, castor oil, phospholipids, omega-3 fatty acid, and medium-chain triglycerides. The literature suggests the potential of lipid-containing eye drops to alleviate some of the signs and symptoms and enhance the quality of life for individuals suffering from evaporative dry eyes.

A Study on Mineral Oil Hydrocarbons (MOH) Contamination in Pig Diets and Its Transfer to Back Fat and Loin Tissues

This study assessed saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) levels in grower-finisher feeds for pigs supplemented with 5% crude palm oil (CP), crude olive pomace oil (COP), olive pomace acid oil (OPA), or a blend of CP and OPA (50:50, w/w); the contribution of the lipid source to that contamination; and the ability of pigs to accumulate MOH in back fat and loin tissues after 60 days of trial. MOSH and MOAH were analyzed with liquid chromatography (LC)-gas chromatography (GC)-flame ionization detection (FID) after sample preparation. Among the lipid sources, CP had the lowest MOH levels, but CP feeds showed the highest contamination. This, along with the different MOSH profiles, indicated the presence of more significant contamination sources in the feeds than the lipid source. The higher MOH contamination in CP feeds was reflected in the highest MOSH levels in pig back fat, whereas MOAH were not detected in animal tissues. Also, MOSH bioaccumulation in pig tissues was influenced by the carbon chain length. In conclusion, feed manufacturing processes can determine the MOSH contamination present in animal adipose tissues that can be included in human diets.

Toxicological Assessment of Higher Olefins in OECD TG 422 Repeated Dose and Reproductive /Developmental Toxicity Screening Tests in Han Wistar Rats

Higher olefins (HO) are used primarily as intermediates in the production of other chemicals, such as polymers, fatty acids, plasticizer alcohols, surfactants, lubricants, amine oxides, and detergent alcohols. The potential toxicity of five HO (i.e., 1-Octene, Nonene, Decene, Hexadecene, and 1-Octadecene) with carbon ranging from C8 to C18 was examined in a combined repeated dose and reproduction/developmental toxicity screening study (OECD TG 422). These five HO were administered to Han Wistar rats by gavage at 0 (controls), 100, 300, and 1000 mg/kg bw/day. As a group of substances, adaptive changes in the liver (liver weight increase without pathological evidence), as well as increased kidney weight in male rats, were observed in HO with carbon numbers from C8 to C10. The overall systemic no observed adverse effect level (NOAEL) for all HO was determined at 1000 mg/kg bw/day. In the reproductive/developmental toxicity assessment, offspring viability, size, and weights were reduced in litters from females treated with Nonene at 1000 mg/kg bw/day. The overall no observed effects level (NOEL) for reproductive toxicity was considered to be 300 mg/kg bw/day for Nonene and 1000 mg/kg bw/day for the other four HO, respectively. These data significantly enrich the database on the toxicity of linear and branched HO, allowing comparison with similar data published on a range of linear and branched HO. Comparisons between structural class and study outcome provide further supportive data in order to validate the read-across hypothesis as part of an overall holistic testing strategy.

Evaluating the in vitro developmental toxicity potency of a series of petroleum substance extracts using new approach methodologies (NAMs)

The present study evaluates the in vitro developmental toxicity and the possible underlying mode of action of DMSO extracts of a series of highly complex petroleum substances in the mouse embryonic stem cell test (mEST), the zebrafish embryotoxicity test (ZET) and the aryl hydrocarbon receptor reporter gene assay (AhR CALUX assay). Results show that two out of sixteen samples tested, both being poorly refined products that may contain a substantial amount of 3- to 7-ring polycyclic aromatic compounds (PACs), induced sustained AhR activation in the AhR CALUX assay, and concentration-dependent developmental toxicity in both mEST and ZET. The other samples tested, representing highly refined petroleum substances and petroleum-derived waxes (containing typically a very low amount or no PACs at all), were negative in all assays applied, pointing to their inability to induce developmental toxicity in vitro. The refining processes applied during the production of highly refined petroleum products, such as solvent extraction and hydrotreatment which focus on the removal of undesired constituents, including 3- to 7-ring PACs, abolish the in vitro developmental toxicity. In conclusion, the obtained results support the hypothesis that 3- to 7-ring PACs are the primary inducers of the developmental toxicity induced by some (i.e., poorly refined) petroleum substances and that the observed effect is partially AhR-mediated.

Veterinary Autogenous Vaccines for Poultry in Europe-Many Ways to Crack an Egg

In the past decade, European animal farming has increasingly used autogenous vaccines for the prevention of nonnotifiable diseases. In Europe, these vaccines are exclusively inactivated bacterial and viral vaccines, with a set of specific regulations that differentiate them from conventional vaccines. The highest number of applications most likely occurs in poultry, as these animal species are farmed in the highest numbers compared with other types of food-producing animals. In 2019, autogenous vaccines came within the scope of harmonized European regulation for the first time, although many important aspects are still missing and need to be further developed. Consequently, several important legal provisions remain in national legislations and can vary tremendously between different member states of the European Union. The inclusion of autogenous vaccines in the management of certain diseases of poultry is justified by the nonavailability of licensed vaccines and the evolution and diversity of antigens in the field that are not covered by licensed vaccines. In addition, these vaccines aid in reducing the use of antibiotics. The methods for isolating and typing pathogenic isolates to obtain relevant antigens are pathogen specific and require a careful approach based on clinical evidence. Manufacturing processes are optimized according to regulatory standards, and they represent the most critical factor influencing the quality of autogenous vaccines and their placement on the market. This review presents the important requirements for manufacturing autogenous vaccines for poultry in addition to the relevant regulatory considerations. The results from a survey of several European Union member states regarding specific provisions within their national legislations are also presented.

Update of the risk assessment of mineral oil hydrocarbons in food

Mineral oil hydrocarbons (MOH) are composed of saturated hydrocarbons (MOSH) and aromatic hydrocarbons (MOAH). Due to the complexity of the MOH composition, their complete chemical characterisation is not possible. MOSH accumulation is observed in various tissues, with species-specific differences. Formation of liver epithelioid lipogranulomas and inflammation, as well as increased liver and spleen weights, are observed in Fischer 344 (F344) rats, but not in Sprague-Dawley (SD) rats. These effects are related to specific accumulation of wax components in the liver of F344 rats, which is not observed in SD rats or humans. The CONTAM Panel concluded that F344 rats are not an appropriate model for effects of MOSH with wax components. A NOAEL of 236 mg/kg body weight (bw) per day, corresponding to the highest tested dose in F344 rats of a white mineral oil product virtually free of wax components, was selected as relevant reference point (RP). The highest dietary exposure to MOSH was estimated for the young population, with lower bound-upper bound (LB-UB) means and 95th percentiles of 0.085-0.126 and 0.157-0.212 mg/kg bw per day, respectively. Considering a margin of exposure approach, the Panel concluded that the present dietary exposure to MOSH does not raise concern for human health for all age classes. Genotoxicity and carcinogenicity are associated with MOAH with three or more aromatic rings. For this subfraction, a surrogate RP of 0.49 mg/kg bw per day, calculated from data on eight polycyclic aromatic hydrocarbons, was considered. The highest dietary exposure to MOAH was also in the young population, with LB-UB mean and 95th percentile estimations of 0.003-0.031 and 0.011-0.059 mg/kg bw per day, respectively. Based on two scenarios on three or more ring MOAH contents in the diet and lacking toxicological information on effects of 1 and 2 ring MOAH, a possible concern for human health was raised.

Chemoselective derivatisation and ultrahigh resolution mass spectrometry for the determination of hydroxyl functional groups within complex bio-oils

Bio-oils are a renewable alternative resource for the production of fine chemicals and fuels. Bio-oils are characterised by a high content of oxygenated compounds with a diverse array of different chemical functionalities. Here, we performed a chemical reaction to transform the hydroxyl group of the various components in a bio-oil prior to characterisation with ultrahigh resolution mass spectrometry (UHRMS). The derivatisations were first evaluated using twenty lignin-representative standards with different structural features. Our results indicate a highly chemoselective transformation of the hydroxyl group despite the presence of other functional groups. Mono- and di-acetate products were observed in acetone-acetic anhydride (acetone-Ac₂O) mixtures for non-sterically hindered phenols, catechols and benzene diols. Dimethyl sulfoxide-Ac₂O (DMSO-Ac₂O) reactions favoured the oxidation of primary and secondary alcohols and the formation of methylthiomethyl (MTM) products of phenols. The derivatisations were then performed in a complex bio-oil sample to gain insights into the hydroxyl group profile of the bio-oil. Our results indicate that the bio-oil before derivatisation is composed of 4500 elemental compositions containing 1-12 oxygen atoms. After the derivatisation in DMSO-Ac₂O mixtures, the total number of compositions increased approximately five-fold. The reaction was indicative of the variety of hydroxyl group profiles within the sample in particular the presence of phenols that were ortho and para substituted, non-hindered phenols (about 34%), aromatic alcohols (including benzylic and other non-phenolic alcohols) (25%), and aliphatic alcohols (6.3%) could be inferred. Phenolic compositions are known as coke precursors in catalytic pyrolysis and upgrading processes. Thus, the combination of chemoselective derivatisations in conjunction with UHRMS can be a valuable resource to outline the hydroxyl group profile in elemental chemical compositions in complex mixtures.

The role of comprehensive two-dimensional gas chromatography in mineral oil determination

Mineral oil hydrocarbons (MOH) contain a wide structural diversity of molecules, for which the reference method of analysis is the online coupled liquid chromatography-gas chromatography with flame ionization detection (LC-GC-FID). These compounds are very heterogeneous from a toxicological viewpoint, and an accurate risk assessment when dealing with a MOH contamination can only be performed if sufficient information is available on the types of structures present (i.e., number of carbons, degree of alkylation, number of aromatic rings). Unfortunately, the separation performances of the current LC-GC-FID method are insufficient for such characterization, not even mentioning the possible coelution of interfering compounds which additionally hinder MOH determination. Comprehensive two-dimensional gas chromatography (GC × GC), while mostly used for confirmation purposes in the past, starts to prove its relevance for overcoming the weaknesses of the LC-GC method and reaching even better the analytical requirements defined in the latest EFSA opinion. The present paper therefore aims at highlighting how GC × GC has contributed to the understanding of the MOH topic, how it has developed to meet the requirements of MOH determination, and how it could play a role in the field for overcoming many of the current analytical and toxicological challenges related to the topic.

Performance of a membrane fabricated from high-density polyethylene waste for dye separation in water

Industrial growth can have a good impact on a country's economic growth, but it can also cause environmental problems, including water pollution. About 80% of industrial wastewater is discharged into the environment without treatment, of which 17-20% is dominated by dyes, such as methylene blue (MB) and methyl orange (MO) from the textile industry. Only about 5% of a textile dye is used in the dyeing process and the rest is discarded. This problem, of course, requires special handling considering the harmful effects to health. On the other hand, the abundance of plastic waste is increasing by 14% or 85 000 tons per year. This problem must be solved due to its film-forming properties. High-density polyethylene (HDPE) is one type of plastic used as a membrane material. Therefore, in this study, HDPE plastic waste was utilized as a membrane for dye removal. In this study, HDPE plastic waste was fabricated via a thermal-induced phase-separation method using mineral oil as a solvent at various concentrations of 8%, 10%, 13%, and 15% (w/w). All the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and contact angle measurements. The results showed that the HDPE membrane at a concentration of 15% displayed the best performance compared to the others in terms of MB rejection. The negative charge (-36.9) of the HDPE membrane was more effective for cationic dye removal compared to the anionic dye. The flux and rejection of HDPE 15% for 100 ppm MB and MO removal were 2.71 and 4.93 L m^-2 h^-1, and 99.72% and 89.8%, respectively. The pure water flux of the membrane was 15.01 L m^-2 h^-1 and the tensile strength was 0.3435 MPa.

[Aspects of sustainability of topical therapy]

BACKGROUND

Topical compounds are an important treatment option in dermatology. Many ingredients and packaging do not yet sufficiently fulfill sustainable criteria.

OBJECTIVES

This article aims to provide a compact overview of sustainability criteria of topical compounds and packaging.

MATERIALS AND METHODS

Based on a selective literature search and personal experience, common ingredients and packaging of topical preparations are summarized.

RESULTS

Topical preparations often contain mineral oils, acrylates, silicones and polyethylene glycols (PEG), which show poor biodegradability and may accumulate in the environment. As an alternative to these non-renewable substances, plant-based fats, oils, and waxes can be used. Biopolymers such as plant-based gum, agar-agar, pectin, and biologically produced hyaluronic acid are an alternative to plastic polymers. The environmental footprint of glass as packaging material is overestimated. Currently, plastics and aluminum may be preferable when recycled correctly.

CONCLUSION

The production of topical formulations without using mineral oils, silicones, acrylates, and PEGs is technically challenging. A sustainable packaging material that fulfills all relevant functionalities is not yet available. Packaging should meet high requirements regarding ecological, economic, and social factors. Better performance with respect to new opportunities in recycling and waste management should be incorporated. Overall, the legislative authorities should provide relevant incentives for more sustainable topical compounds and packaging.

Combination of Multidimensional Instrumental Analysis and the Ames Test for the Toxicological Evaluation of Mineral Oil Aromatic Hydrocarbons

Mineral oil aromatic hydrocarbons (MOAHs) include mutagenic and carcinogenic substances and are considered a potential health risk. Current methods address the total MOAH content but cannot address the actual toxicological hazard of individual components. This work presents a combined methodology closing those gaps: high-performance liquid chromatography (HPLC) coupled to gas chromatography with flame ionization detection was used to determine the MOAH content. To characterize present substance classes, comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry was applied. Preparative HPLC separated MOAHs into subgroups, which were tested with a miniaturized Ames test evaluating DNA reactivity of isolated fractions. Combining these methods allowed a correlation between present subgroups and DNA reactivity. The developed approach was applied to a mineral oil and distinguished between not DNA-reactive mono- and diaromatics and DNA-reactive tri- and polyaromatics, providing a proof of concept. Hereinafter, it will be applied to diverse sample matrices including mineral oils, food, and food contact materials.

Lack of human-relevant adversity of MOSH retained in tissues: Analysis of adversity and implications for regulatory assessment

Mineral oils (food grade white oil or liquid paraffin) have historically been safely used in a number of sensitive end-uses, including pharmaceutical, cosmetic and food. Recent concern that certain mineral hydrocarbons (branched and cyclo-alkanes) may accumulate in human tissues has prevented European Food Safety Authority (EFSA) from deriving guidance values for food exposures. Analysis of human and animal tissue indicate that an unresolved cloud of mostly highly branched alkanes and alkylated cycloalkanes within the C20-C35 range is consistently present in all tissues. This critical review thoroughly assesses the retention of "mineral oil saturated hydrocarbons" (MOSH) in human and animal tissues and evaluates if the presence of MOSH is considered adverse and appropriate to use for risk assessment, generation of guidance values for food exposure and/or generation of derivation of health-based guidance values. An adversity framework was utilized to perform an in-depth weight of the evidence analysis, and it was concluded that mere presence of MOSH does not translate to hazard identification, and is not considered adverse. In light of this conclusion, it would not be appropriate to utilize this endpoint as the point of departure to calculate a health guidance value.

In-situ oligomerization of lactic acid within broiler skin extracted elastin/collagen matrix for the efficacy of ointment base

Elastin and collagen were isolated from waste broil skin and modified with l-lactic acid oligomer for the efficacy of substituting petroleum based ointment base matrix. Paraffin wax, which is one of the most extensively used petroleum ointment derivative is well known for its incompatibility with the skin. Chronically it clogs the skin pores, which subsequently affects the release of moisture. To mitigate this problem, a novel approach has been followed to synthesize a fully green and biocompatible ointment base matrix. The extracted Elastin and Collagen (which exists naturally in our skin) and lactic acid monomer (commonly known as a part of a body fluid) mixed at different proportion and used to synthesize a lactic acid modified elastin/collagen (OLLA-m-ELN/COL) bioconjugate matrix with lubricating characteristics via in-situ polycondensation reaction. The macromolecular interaction between Amide I group of elastin/collagen and C=O of a lactic acid oligomer was confirmed by FTIR analysis. Organoleptic analysis, spreadability, pH, and viscosity were analyzed. The six-mass loss stages which was observed in the ELN/COL matrix was changed into a single mass loss for the synthesized bioconjugate with improved thermal stability. The thermal stability improvement can be correlated with the formation of secondary macromolecular interaction.

Use of mineral oil in IVF culture systems: physico-chemical aspects, management, and safety

PURPOSE

The study aims to summarize current knowledge on the use of oil in embryo culture systems, with a focus on proper management of different types of oil and possible impact on culture systems.

METHODS

PubMed was used to search the MEDLINE database for peer-reviewed English-language original articles and reviews concerning the use of oil in embryo culture systems. Searches were performed by adopting "embryo," "culture media," "oil," and "contaminants" as main terms. The most relevant publications were assessed and discussed critically.

RESULTS

Oils used in IVF are complex mixtures of straight-chain hydrocarbons, cyclic and aromatic hydrocarbons, and unsaturated hydrocarbons, whose precise composition influences their chemical and physical properties. Possible presence of contaminants suggests their storage at 4 °C in the dark to prevent peroxidation. Washing, generally performed by manufacturers prior to commercialization, may remove trace chemical contaminants. Oils reduce evaporation from culture media at rates depending on their chemical physical properties, culture system parameters, and incubator atmosphere. Contaminants - mainly metal ion and plastic components derived from refinement processes and storage - can pass to the aqueous phase of culture systems and affect embryo development.

CONCLUSIONS

Oils are essential components of culture systems. Their original quality and composition, storage, handling, and use can affect embryo development with significant efficiency and safety implications.

The effect of alkyl substitution on the oxidative metabolism and mutagenicity of phenanthrene

Alkyl-substituted PAHs may be present in certain petroleum-derived products and in the environment and may eventually end up in consumer products, such as foodstuffs, cosmetics and pharmaceuticals. Safety concerns over possible exposure to alkylated PAHs have emerged. Bioactivation is a prerequisite for the mutagenicity and carcinogenicity of PAHs and has been extensively studied for non-substituted PAHs, while data on the bioactivation of alkyl-substituted PAHs are scarce. The present study investigated the effect of alkyl substitution on the CYP 450-mediated metabolism of phenanthrene and eight of its alkylated congeners by quantifying metabolite formation in rat and human liver microsomal incubations. Furthermore, the mutagenicity of four selected methylated phenanthrenes was compared to that of phenanthrene using the Ames test. The obtained results support the hypothesis that alkyl substitution shifts the oxidative metabolism from the aromatic ring to the alkyl side chain. Increasing the length of the alkyl chain reduced overall metabolism with metabolic conversion for 1-n-dodecyl-phenanthrene (C12) being negligible. 1- and 9-methyl-phenanthrene, in which the methyl group generates an additional bay region-like structural motif, showed mutagenicity toward Salmonella typhimurium TA98 and TA 100, whereas phenanthrene and also 2- and 3-methyl-phenanthrene, without such an additional bay region-like structural motif, tested negative. It is concluded that the position of the alkylation affects the metabolism and resulting mutagenicity of phenanthrene with the mutagenicity increasing in cases where the alkyl substituent creates an additional bay region-like structural motif, in spite of the extra possibilities for side chain oxidation.

Relevance of animal studies in the toxicological assessment of oil and wax hydrocarbons. Solving the puzzle for a new outlook in risk assessment

Paraffin waxes and white mineral oils are distinct petroleum products separated from a common feedstock by crystallization, where only n-alkanes, iso- and cyclo-alkanes with a linear backbone of ∼ 20 carbon atoms long, selectively crystalize out from the oil to form the wax, which is solid at room temperature, whereas oils remain liquid. Up until the 90's, these differences were reflected in separated regulatory assessments. A paradigm shift occurred when Fischer 344 rats (F-344) developed liver epithelioid granuloma following exposure to low and medium viscosity oils or waxes. This lesion was used as common denominator between these products to be jointly assessed under the common term "mineral hydrocarbons - MHC", obviating compositional differences. This regulatory paradigm dominated for the next 30 years, exacerbated by the EFSA 2012 evaluation using the analytical term "MOSH" (mineral oil saturated hydrocarbons) which encompassed these products under single chromatography fraction. The reconstruction of historical developments, together with recent EFSA-sponsored studies of toxicity and accumulation and supporting literature, has allowed us to understand the etiology of the F-344 rat hepatic epithelioid granuloma, which is presented in an adverse outcome pathway (AOP). Considering chemical composition, it clearly demonstrates that the hepatic effects in F-344 rats caused by linear alkanes of waxes are irrelevant for humans. Waxes are thus not MOSH and should thus be evaluated on their own merit. The term MOSH should not include n-alkanes and be exclusively used to mineral oil fractions when considering their chemical makeup for a relevant human hazard assessment.

Atmospheric Solids Analysis Probe (ASAP) and Atmospheric Pressure Gas Chromatography (APGC) coupled to Quadrupole Time of Flight Mass Spectrometry (QTOF-MS) as alternative techniques to trace aromatic markers of mineral oils in food packaging

The aim of this work was to select and identify the best markers of aromatic hydrocarbon mineral oil (MOAH) in food packaging. For this purpose, a series of mineral oils was initially analysed. Polycyclic Aromatic Hydrocarbons (PAHs) and the alkylated isomers of Methylnaphthalene (MNS), Diisopropylnaphtalene (DIPNs), Dibenzothiophenes (DBTS), Methyldibenzothiophene (MDBTs), Dimethyldibenzothiophenes (DMDBTs) and Benzonaphthiophenes (BNTS) were then explored. Their presence was confirmed by direct analysis of several mineral oils by Atmospheric Solids Analysis Probe Quadrupole-Time of Flight Mass Spectrometry (ASAP-QTOF-MS). Atmospheric Pressure Gas Chromatography Quadrupole-Time of Flight Mass Spectrometry (APGC-QTOF-MS) was used to confirm the markers in different samples of oils, recycled PET (rPET), recycled cardboard and packaging of couscous and semolina to confirm the contamination. 27 markers were found in the mineral oil samples, 22 of them in rPET, 8 in recycled board and no MOAH were found in packaging of couscous and semolina.

Investigation and probabilistic health risk assessment of trace elements in good sale lip cosmetics crawled by Python from Chinese e-commerce market

A growing body of evidence suggests that the lip products are polluted by heavy metals, which would inevitably cause safety problems with long-term exposure, but few studies have focused on their deeper health risk assessments. This study sets out to identify the lip cosmetics in good sale from Chinese e-commerce market utilizing Python crawler and then explore the probabilistic health risks caused by 6 trace elements in 34 most popular lip cosmetics with Monte Carlo simulation. The results found that there was no obvious non-carcinogenic risk to humans. As for high users, the carcinogenic risk levels of Cr exceeded the acceptable risk recommended by USEPA, approximately 10% and 25% for lipsticks and lip glosses, respectively. Cr was regarded as the priority metal for risk control in the present study. Finally, it was recommended that the minimum use period limit for using up one lip product ranged from 0.54 months to 5.74 months. Overall, this study appears to be the first to conduct a probabilistic health risk assessment of trace elements in lip products, which would be of significance for policy makers to take effective strategies to minimize exposure health risk and contamination.

Exposure Assessment of Toxicologically Relevant Volatile Organic Compounds Emitted from Polymer-Based Costume Masks

Plastic costume masks regularly exhibit unpleasant odors that may be associated with the emissions of volatile organic compounds (VOCs). Upon inhalation, VOCs might adversely affect the wearer's health if the exposure exceeds regulatory threshold values. The VOCs emitted from a selection of costume masks (n = 12) were characterized semiquantitatively with a screening method based on GC/MS measurements in dynamic headspace sampling mode. Furthermore, odors associated with the masks were evaluated by a sensory panel. Two masks emitted particularly high concentrations of ethylbenzene, xylenes, and cyclohexanone and exhibited the most intense and unpleasant odors, which were described as rubber-like, pungent, and leather-like. To simulate and assess the inhalation exposures for wearers of these masks, an innovative experimental setup based on a doll's head was developed, with sampling of emitted volatiles on adsorption material and subsequent analysis by thermal desorption-GC/MS. The measured inhalable concentrations of cyclohexanone exceeded the derived no-effect level (DNEL) for systemic effects on the general population over several hours of wearing, and also after repeated use. Importantly, the cyclohexanone DNEL was reevaluated in relation to a recent study on inhalation toxicity in rodents and was found to be significantly lower (1.4 mg·m^-3) compared to the industry-derived values (10-20 mg·m^-3), thus aggravating the health risks associated with inhalation exposure from some of the costume masks tested. Finally, a comparison of the inhalable concentrations derived from the simulated exposure assessments with those derived from measurements in miniaturized emission test chambers indicate that microchambers represent a useful tool for high-throughput analysis. The influences of temperature and inhalation/exhalation flow rates on VOC exposures were also studied.

Do Claims about the Naturalness and Dose of Cosmetics Ingredients Affect the Public’s Perception of Their Safety?

Media articles have claimed that “synthetic mineral oil saturated hydrocarbons (MOSH)”, which are used in many cosmetics such as lip balms, are unsafe at any dose and should be replaced with natural alternatives. This paper examines whether these claims are correct and whether the perceived safety of these substances is influenced by the language used in the media. To achieve these goals, it first provides an extensive review of the toxicology literature, finding no support that MOSHs are unsafe at current usage levels. It then reviews the psychology literature to examine the effects of labelling a cosmetic ingredient as “natural” rather than “synthetic” and the effects of dose information. A 2 × 2 between-subjects experiments involving adult lip balm users shows that, as hypothesized, the perceived safety of lip balms increases when they are described as containing “naturally sourced mineral oil” rather than “synthetic mineral oil saturated hydrocarbon (MOSH)”, which are both correct descriptions. In addition, the perceived safety increases when the substance is described as being present in a low vs. a high dose, regardless of whether it was described as natural or synthetic. Overall, safety perceptions for common cosmetic substances can be significantly influenced by the language used in media reporting.

Sunflower seed oil containing ginseng stem-leaf saponins (E515-D) is a safe adjuvant for Newcastle disease vaccine

Vaccination is an effective method to prevent Newcastle disease (ND) in chickens. Marcol 52 and #10 white oil are mineral-based adjuvants and can be found in commercial inactivated ND virus vaccines. The present study demonstrated that a vegetable origin oil E515-D had lower polycyclic aromatic hydrocarbons and higher flash point than the commercial products Marcol 52 and #10 white oil. E515-D could be mixed with an aqueous phase containing ND virus antigen to form a stable water-in-oil vaccine emulsion and exhibited more potent adjuvant effects on the immune response than Marcol 52 and #10 white oil. Moreover, the absorption of E515-D-adjuvanted vaccine was faster than absorption of Marcol 52- and #10 white oil-adjuvanted vaccines when ND virus vaccines were injected in broilers. Therefore, E515-D was safe and could be a suitable adjuvant used in vaccines for food animals. In addition，E515-D is not easy to be flammable during shipping and storage owing to its higher flash point.