Imprinted hydrophilic nanospheres as drug delivery systems for 5-fluorouracil sustained release

Research progresses on carboxymethyl xanthan gum: Review of synthesis, physicochemical properties, rheological characterization and applications in drug delivery

Xanthan gum is a nonionic polysaccharide widely explored in biomedical, nutraceutical, and pharmaceutical fields. XG suffers from several drawbacks like poor dissolution, lower bioavailability and an inability to form hydrogels. The carboxymethyl derivative of XG, CMX, has better solubility, dissolution, and bioavailability characteristics. Moreover, due to its anionic character, it forms water insoluble hydrogels upon crosslinking with metal cations. CMX hydrogels are used to prepare matrix tablets, microparticles, beads, and films. CMX hydrogels has been used in drug delivery and tissue engineering fields. CMX hydrogels are used for sustained gastrointestinal, colon targeted, and transdermal delivery of drugs. CMX nanoparticles have been used for targeted delivery of anticancer drugs to tumor cells. CMX hydrogels have already made significant strides in drug delivery and tissue engineering fields. Further understanding of the physicochemical properties and rheological characteristics of CMX would enable researchers to explore newer applications of CMX. This review article thus aims to discuss the synthesis, physicochemical properties, and rheological characteristics of CMX. The article also gives critical insights on the versatility of CMX as a drug delivery carrier and presents prospective trends on applications of CMX.

Optimized molecular imprints in gamma-irradiated collagen shields of an antifungal drug: In vitro characterization, in-vivo bioavailability enhancement

The purpose of this manuscript is to develop sustained release molecularly imprinted voriconazole (VOR) that were loaded into collagen shield (CS) for ocular treatment of fungal keratitis. Various molecularly imprinted polymer (MIP) formulae were prepared by a precipitation polymerization technique. Different monomers and crosslinkers were tested to obtain better binding capacity. Two promising formulae; (F1: VOR: Acrylamide: ethylene glycol dimethacrylate (EGDMA): benzoyl peroxide (BPO) in the molar ratio of 1:5:15:1.6 mM, respectively) and (F3: VOR: Acrylamide: methyl methacrylic acid (MMA): EGDMA: BPO in the molar ratio 1:2.5:2.5:15:1.6 mM, respectively) were selected according to their binding capacities (82.79% ± 0.86, and 94.90% ± 1.25 respectively), and their release profiles over 48 h in simulated tears fluid (STF) (41.64 ± 1.92, and 85.39 ± 1.64 respectively). Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were carried out. The selected CS (F1 CS and F3 CS) showed sustained release profiles (57.38%± 0.72, and 98.51%±0.49 respectively) over 72 h in STF. Results of trans-corneal permeation and antifungal activity were enhanced for the optimized formula (F3 CS) compared to (F1 CS) and drug solution. Furthermore, in vivo pharmacokinetic studies were conducted showing significant increase in C_max, delayed T_max and promoted relative bioavailability. After ocular insertion of F3 CS in male albino rabbits, histopathological studies were attained to assure the safety of the formula. Finally, optimized VOR-MIP-CS could provide promising ocular drug delivery systems (DDS).

Anti-EGFR-mAb and 5-Fluorouracil Conjugated Polymeric Nanoparticles for Colorectal Cancer

BACKGROUND

Due to the higher intake of junk food and unhealthy lifestyle, the percentage of U.S. adults aged 50 to 75 years who were up-to-date with colorectal cancer screening increased 1.4 percentage points, from 67.4% in 2016 to 68.8% in 2018. This represents an additional 3.5 million adults screened for colorectal cancer. This is a severe concern of this research, and an attempt was made to prepare a target-specific formulation that could circumvent chemotherapy-related compilation and improvise higher cellular uptake. The fundamental agenda of this research was to prepare and develop Anti-EGFR mAb and 5-Fluorouracil (5-FU) fabricated polymeric nanoparticles for colorectal cancer.

OBJECTIVE

The main objective of this research was to prepare and evaluate more target specific formulation for the treatment of colorectal cancer. PLGA and PEG-based polymeric nanoparticles are capable of preventing opsonization via the reticuloendothelial system. Hence, prepared polymeric nanoparticles are capable of higher cellular uptake.

METHODS

The Poly(d,1-lactide-co-glycolide) (PLGA) and Polyethylene Glycol (PEG) were combined utilizing the ring-opening polymerization method. The presence of PEG prevents opsonization and distinguished blood concentration along with enhanced targeting. The presence of PLGA benefits in the sustained release of polymeric formulations. The optimized formulation (5-FU-PLGA- PEG-NP) was lyophilized using 4% trehalose (cryoprotectants) and conjugated with Anti- EGFR mAb on its surface to produce Anti-EGFR-5-FU-PLGA-PEG-NP; the final formulation, which increases target specificity and drug delivery system of nanoparticles.

RESULTS

The spherical shaped optimized formulation, 5-FU-PLGA-PEG-NP-3 was found to have higher percentage drug entrapment efficacy (71.23%), higher percentage drug content (1.98 ± 0.34%) with minimum particles size (252.3nm) and anionic zeta potential (-31.23mV). The IC₅₀ value of Anti-EGFR-5-FU-PLGA-PEG-NP was 1.01μg/mL after 48 hours incubation period in the HCT 116 cell line, indicating higher anticancer effects of the final formulation.

CONCLUSION

From the outcomes of various experiments, it was concluded that Anti-EGFR-5-FUPLGA- PEG-NP has biphasic drug release kinetics, higher cellular uptake and higher cytotoxicity. Therefore, anti-EGFR-5-FU-PLGA-PEG-NP holds excellent potential for drug delivery to EGFR positive colorectal cancer cells.

Carboxyl-fentanyl detection using optical fibre grating-based sensors functionalised with molecularly imprinted nanoparticles

Butyrylfentanyl is a new designer drug reported with growing use and related deaths. Routine toxicological analyses of this novel synthetic opioid drug have not been established yet. This work reports a fibre optic sensor that measures carboxyl-fentanyl which is the major metabolite of butyrylfentanyl presented in blood, providing a promising tool for detecting butyrylfentanyl intoxication. A long period fibre grating (LPG) sensor array operating at phase-matching condition is deployed in combination with a state-of-the-art molecular imprinting technique. Nano-sized molecularly imprinted polymers (nanoMIPs) are synthesised via a solid-phase approach and coated on the surface of an LPG array. An LPG array consists of two parts: a detection and a reference LPG. The former is functionalised with nanoMIPs prior to the measurements, whilst the latter is used to take into account the temperature response of the detection LPG. The developed sensor exhibits a gradual response over increasing concentrations of carboxyl-fentanyl from 0 to 1000 ng/mL with a minimal detected concentration of 50 ng/mL, that corresponds to a wavelength shift of 1.20 ± 0.2 nm. The Langmuir adsorption isotherm is applied to fit the analytical data which reveal a binding constant of 2.03 μM^-1. The developed sensor shows high selectivity in detecting carboxyl-fentanyl among other drugs and potential interferents including morphine, cocaine, glucose and albumin. It shows a certain degree of cross-response to fentanyl which shares the same binding sites as carboxyl-fentanyl and therefore can be potentially used to detect fentanyl.

The influence of cross-linking agent onto adsorption properties, release behavior and cytotoxicity of doxorubicin-imprinted microparticles

Molecularly imprinted polymers (MIPs) are synthetic polymers that possess cavities selective towards their molecular templates and have found many applications in separation science, drug delivery, and catalysis. Here, we report the synthesis of doxorubicin-imprinted microparticles cross-linked with two different compounds (ethylene glycol dimethacrylate or trimethylolpropane trimethacrylate) and examination of their physicochemical properties. During the synthesis methacrylic acid was used as functional monomer and 2-hydroxyethyl methacrylate was added into polymerization mixture to increase hydrophilicity of the obtained materials and therefore improve interactions with aqueous release medium. The influence of initial concentration and contact time onto doxorubicin adsorption by obtained MIPs microparticles have been investigated. The microparticles obtained using ethylene glycol dimethacrylate as a cross-linker showed 3 times higher adsorption properties towards doxorubicin, than the ones obtained using trimethylolpropane trimethacrylate cross-linker. The release kinetics of doxorubicin from drug-loaded MIPs microparticles has been proven to be dependent upon cross-linker used and pH of the release medium. For drug-loaded MIPs microparticles obtained using both cross-linkers the IC₅₀ values measured for cancer cell were comparable to the ones measured for pure doxorubicin, whereas the cytotoxicity towards normal HDF cell lines was lower.

Supramolecular Tripeptide Hydrogel Assembly with 5-Fluorouracil

In this work, we present Thioflavin T fluorescence, transmission electron microscopy (TEM), circular dichroism (CD), Fourier-transformed infrared (FT-IR), and oscillatory rheometry studies applied to an antineoplastic drug, 5-fluorouracil (5-FU), embedded in a heterochiral tripeptide hydrogel to obtain a drug delivery supramolecular system. The release of 5-fluorouracil was monitored over time by reverse-phase high-performance liquid chromatography (HPLC) and its interaction with the tripeptide assemblies was probed by all-atom molecular dynamics simulations.

Reviewing two decades of nanomedicine implementations in targeted treatment and diagnosis of pancreatic cancer: An emphasis on state of art

Pancreatic cancer is nowadays the most life-threatening cancer type worldwide. The problem of poor diagnosis, anti-neoplastics resistance and biopharmaceutical drawbacks of effective anti-cancer drugs lead to worsen disease state. Nanotechnology-based carrier systems used in both imaging and treatment procedures had solved many of these problems. It is critical to develop advanced detection method to save patients from being too late diagnosed. Targeting the pancreatic cancer cells as well helped in decreasing the side effects associated with normal cells destruction. Drug resistance is another challenge in pancreatic cancer management that can be solved by thorough understanding of the microenvironment associated with the disease to design creative nanocarriers. This is the first article to review multifaceted approaches of nanomedicine in pancreatic cancer detection and management. Additionally, mortality rates in selected Arab and European countries were illustrated herein. An emphasis was given on therapeutic and diagnostic challenges and different nanotechnologies adopted to overcome. The four main approaches encompassed nanomedicine for herbal treatment, nanomedicine of synthetic anti-cancer drugs, metal nanoparticles as a distinct treatment policy and nanotechnology for cancer diagnosis. Future research perspectives have been finally proposed.

Molecular Imprinting Prevents Environmental Contamination and Body Toxicity from Anticancer Drugs: An Update

Cancer has been responsible for high morbidity and mortality globally. The treatment of cancer is possible using different kinds of therapies using anticancer drugs if it is diagnosed at the right time. Nevertheless, their appropriate administration for maximum therapeutic effect and their elimination from the patient's body causing environmental problems are two big issues which could be successfully abated using molecular imprinted polymers (MIPs) owing to their unique features. In this review, we have compiled and discussed the works on the determination and controlled release of anticancer drugs based on MIPs. We also highlighted the current challenges and remedies, and the future direction of MIPs in this area.

Antitumor activity of a molecularly imprinted nanopreparation of 5-flurouracil against Ehrlich's carcinoma solid tumors grown in mice: Comparison to free 5-flurouracil

Recently, nanotechnology has received great attention in war against cancer. The present study investigated the antitumor efficacy of molecularly imprinted nanopreparation of 5-fluorouracil (nano-5-FU) against Ehrlich ascites carcinoma (EAC) solid tumors grown in mice. Tumor cells were transplanted into female albino mice. Mice were allocated into 5 groups; Group 1: control EAC bearing mice. Groups 2&3: EAC-bearing mice treated orally with 5-FU (5 and 10 mg/kg) twice weekly. Groups 4&5: EAC bearing mice treated with nano-5-FU (5 and 10 mg/kg) twice weekly. Treatment with nano-5-FU showed higher antitumor effect compared to free 5-FU as indicated by enhanced apoptosis and reduction in tumor weight. Additionally, lower number of mitotic figures and greater area for necrosis were observed in the tumor specimens alongside with a decline in the number of intratumoral proliferating nuclei in comparison to free 5-FU. Furthermore, the results showed a significant down-regulation in tumoral expression of caspase-3 and vascular endothelial growth factor. Together, these results further support the potential of using nanotechnology to enhance anticancer efficacy of 5-FU.

FIB and MIP: understanding nanoscale porosity in molecularly imprinted polymers via 3D FIB/SEM tomography

We present combined focused ion beam/scanning electron beam (FIB/SEM) tomography as innovative method for differentiating and visualizing the distribution and connectivity of pores within molecularly imprinted polymers (MIPs) and non-imprinted control polymers (NIPs). FIB/SEM tomography is used in cell biology for elucidating three-dimensional structures such as organelles, but has not yet been extensively applied for visualizing the heterogeneity of nanoscopic pore networks, interconnectivity, and tortuosity in polymers. To our best knowledge, the present study is the first application of this strategy for analyzing the nanoscale porosity of MIPs. MIPs imprinted for propranolol - and the corresponding NIPs - were investigated establishing FIB/SEM tomography as a viable future strategy complementing conventional isotherm studies. For visualizing and understanding the properties of pore networks in detail, polymer particles were stained with osmium tetroxide (OsO₄) vapor, and embedded in epoxy resin. Staining with OsO₄ provides excellent contrast during high-resolution SEM imaging. After optimizing the threshold to discriminate between the stained polymer matrix, and pores filled with epoxy resin, a 3D model of the sampled volume may be established for deriving not only the pore volume and pore surface area, but also to visualize the interconnectivity and tortuosity of the pores within the sampled polymer volume. Detailed studies using different types of cross-linkers and the effect of hydrolysis on the resulting polymer properties have been investigated. In comparison of MIP and NIP, it could be unambiguously shown that the interconnectivity of the visualized pores in MIPs is significantly higher vs. the non-imprinted polymer, and that the pore volume and pore area is 34% and approx. 35% higher within the MIP matrix. This confirms that the templating process not only induces selective binding sites, but indeed also affects the physical properties of such polymers down to the nanoscale, and that additional chemical modification, e.g., via hydrolysis clearly affects that nature of the polymer.

Development of Molecularly Imprinted Olanzapine Nano-particles: In Vitro Characterization and In Vivo Evaluation

Molecularly imprinted nano-particles (MINPs) selective for olanzapine were prepared using methacrylic acid (MA) as monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, and 2,2-azobis (2-isobutyronitrile) (AIBN) as the initiator in 36 different ratios. The reaction runs with considerable fine powder formation were selected for further binding and selectivity studies. The MINP with the best selectivity (MINP-32) was chosen for further structural characterization by Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), adsorption-desorption isotherm for specific surface area, volume and average pore diameter determination. All characterization methods confirmed the successful formation of MINP. The optimum conditions for maximum template loading on the MINP-32 were found by experimental design using response surface methodology (RSM) and choosing absorbent amount, pH, and time as the main factors. MINPs with maximum template loading also indicated significant selectivity between template and its analog (clozapine). The release profile demonstrated a maximum release of about 95% after 288 h for MINP-32 in comparison with about 94% after 120 h for non-MINP-32. The same slow release of drug from MINP-32 was also observed during animal study of the plasma level of template, 20-28 μg/ml versus 5-10 μg/ml. The MINP-32 of this study represents a desirable ability to keep the memory of the template with significant selectivity and good capability to control the release of template in vitro and in vivo and hence could be a promising drug delivery system.

Selective cholesterol adsorption by molecular imprinted polymeric nanospheres and application to GIMS

Molecular imprinted polymers (MIPs) are tailor-made materials with selective recognition to the target. The goals of this study were to prepare cholesterol imprinted polymeric nanospheres (CIPNs) and optimize their adsorption parameters and also to use CIPNs for adsorption of cholesterol (CHO), which is an important physiological biomacromolecule, from gastrointestinal mimicking solution (GIMS). Pre-polymerization complex was prepared using CHO as template and N-methacryloylamido-(l)-phenylalanine methyl ester (MAPA). This complex was polymerized with 2-hydroxyethyl methacrylate (HEMA). CHO was removed by MeOH and tetrahydrofuran (THF). Adsorption studies were performed after chacterization studies to interrogate the effects of time, initial concentration, temperature, and ionic strength on CHO adsorption onto CIPNs. Maximum adsorption capacity (714.17mg/g) was higher than that of cholesterol imprinted polymers in literature. Pseudo-second-order kinetics and Langmuir isotherm fitted best with the adsorption onto CIPNs. 86% of adsorbed cholesterol was desorbed with MeOH:HAc (80:20, v/v) and CIPNs were used in adsorption-desorption cycle for 5-times with a decrease as 12.28%. CHO analogues; estron, estradiol, testosterone, and progesterone were used for competitive adsorption. The relative selectivity coefficients of CINPs for cholesterol/estron and cholesterol/testosterone were 3.84 and 10.47 times greater than the one of non-imprinted polymeric nanospheres (NIPNs) in methanol, respectively.

In vitro/in vivo study of novel anti-cancer, biodegradable cross-linked tannic acid for fabrication of 5-fluorouracil-targeting drug delivery nano-device based on a molecular imprinted polymer

The structure of a 5-fluorouracil carrier and fluorescent image of an animal after injection under a magnetic field.

Molecularly imprinted polymeric micro- and nano-particles for the targeted delivery of active molecules

Molecular imprinting (MI) represents a strategy to introduce a 'molecular memory' in a polymeric system obtaining materials with specific recognition properties. MI particles can be used as drug delivery systems providing a targeted release and thus reducing the side effects. The introduction of molecular recognition properties on a polymeric drug carrier represents a challenge in the development of targeted delivery systems to increase their efficiency. This review will summarize the limited number of drug delivery MI particles described in the literature along with an overview of potential solutions for a larger exploitation of MI particles as targeted drug delivery carriers. Molecularly imprinted drug carriers can be considered interesting candidates to significantly improve the efficiency of a controlled drug treatment.

A Critical Review on Clinical Application of Separation Techniques for Selective Recognition of Uracil and 5-Fluorouracil

The most important objectives that are frequently found in bio-analytical chemistry involve applying tools to relevant medical/biological problems and refining these applications. Developing a reliable sample preparation step, for the medical and biological fields is another primary objective in analytical chemistry, in order to extract and isolate the analytes of interest from complex biological matrices. Since, main inborn errors of metabolism (IEM) diagnosable through uracil analysis and the therapeutic monitoring of toxic 5-fluoruracil (an important anti-cancerous drug) in dihydropyrimidine dehydrogenase deficient patients, require an ultra-sensitive, reproducible, selective, and accurate analytical techniques for their measurements. Therefore, keeping in view, the diagnostic value of uracil and 5-fluoruracil measurements, this article refines several analytical techniques involved in selective recognition and quantification of uracil and 5-fluoruracil from biological and pharmaceutical samples. The prospective study revealed that implementation of molecularly imprinted polymer as a solid-phase material for sample preparation and preconcentration of uracil and 5-fluoruracil had proven to be effective as it could obviates problems related to tedious separation techniques, owing to protein binding and drastic interferences, from the complex matrices in real samples such as blood plasma, serum samples.

5-Fluorouracil delivery from metal-ion mediated molecularly imprinted cryogel discs

The objective of this study is to prepare imprinted cryogel discs for delivery of 5-fluorouracil. The coordinate bond interactions are utilized to accomplish a coordination complex between metal-chelate monomer N-methacryloyl-L-histidine and 5-FU with the assistance of Cu(2+) ion. The complex is copolymerized with hydroxyethyl methacrylate to produce poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-histidine methyl ester) cryogel discs. The cryogel discs are characterized thoroughly by performing swelling tests, scanning electron microscopy, differential scanning calorimetry and X-ray diffraction studies. In vitro delivery studies are performed to investigate the effects of cross-linker ratio, medium pH and drug concentration. 5-FU imprinted cryogel discs have highly macroporous structures. Drug molecules are homogeneously dispersed in the 5-FU imprinted cryogel matrix. The cumulative release of 5-FU decreased by increasing the cross-linker density in the polymer matrix. Delivery rate of 5-FU varied with different pH values in a coordination complex since metal ion acts as a Lewis acid, and the ligand, i.e. 5-FU acts as a Lewis base. The cumulative release of 5-FU increased with increasing drug concentration in polymer matrix. The nature of the 5-FU transport mechanism is non-Fickian.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Molecular imprinted polymers as drug delivery vehicles

This review is aimed to discuss the molecular imprinted polymer (MIP)-based drug delivery systems (DDS). Molecular imprinted polymers have proved to possess the potential and also as a suitable material in several areas over a long period of time. However, only recently it has been employed for pharmaceuticals and biomedical applications, particularly as drug delivery vehicles due to properties including selective recognition generated from imprinting the desired analyte, favorable in harsh experimental conditions, and feedback-controlled recognitive drug release. Hence, this review will discuss their synthesis, the reason they are selected as drug delivery vehicles and for their applications in several drug administration routes (i.e. transdermal, ocular and gastrointestinal or stimuli-reactive routes).

Preparation and characterization of molecularly imprinted poly(hydroxyethyl methacrylate) microspheres for sustained release of gatifloxacin

Molecularly imprinted poly(hydroxyethyl methacrylate) microspheres (PHEMA MIPMs) were prepared via precipitation polymerization in this article, using gatifloxacin (GFLX), hydroxyethyl methacrylate (HEMA), and ethylene glycol dimethacrylate (EGDMA) as template molecule, functional monomer and cross-linker, respectively. The effects of reaction medium, initial total monomers, cross-linker and molecular imprinting on the polymerization were investigated systematically. The interaction between GFLX and HEMA in pre-solution was studied by UV-Visible spectrophotometer, both size and morphology of products were characterized by a scanning electron microscope. When the total initial monomer concentration was 1 vol%, EGDMA content was 70 mol%, a group of uniform PHEMA MIPMs were prepared at different GFLX/MAA molar ratios, with diameter range from 2.06 ± 0.07 to 2.82 ± 0.20 μm. The results of drug loading and in vitro release experiments demonstrated that PHEMA MIPMs could achieve a higher GFLX loading content and a more acceptable sustained release than non-imprinted ones.

Carbon nanotubes hybrid hydrogels in drug delivery: a perspective review

The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability) with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior). The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review.

Synthesis of chitosan–gelatin molecularly imprinted membranes for extraction ofl-tyrosine

CS-GEL-l-tyr MIMs were prepared in aqueous phase using CS and GEL as functional polymers. The effect of crosslinking agent, PEG concentration and imprinting molecular content were examined. The results indicated that the MIMs have special selectivity to template moleculesl-tyrosine, can effectively separatel-tyrosine from other substances in the water phase and the permeability rate was 13.42%.

Quercetin-imprinted nanospheres as novel drug delivery devices

In this work, molecularly imprinted nanospheres for controlled/sustained release of quercetin were synthesized employing methacrylic acid and ethylene glycoldymethacrylate as functional monomer and crosslinking agent, respectively. One pot precipitation polymerization was chosen as polymerization technique to obtain nanosized materials with spherical shape. Morphological and hydrophilic properties by scanning electron microscopy and water content measurements were determined, and recognition and selectivity properties of the imprinted materials were tested using the template quercetin and its structural analogue, the flavonoid catechin. Finally, the applicability of the obtained materials as drug delivery devices was evaluated by performing in vitro release studies in plasma simulating fluids and cytotoxicity testson HeLa cells.

Molecularly imprinted polymers in drug delivery: state of art and future perspectives

INTRODUCTION

Molecularly imprinted polymers (MIPs) are synthetic receptors, characterized by a high selectivity for the selected template. Among the different applications of MIPs, their use as controlled/sustained drug delivery devices has been extensively explored, even though the optimization of such devices needs to be performed before they are applied in clinical practice.

AREAS COVERED

Within drug delivery, one of the most promising fields is the possibility to modulate the drug release profile in response to a specific external stimulus; MIPs represent potentially suitable vehicles, because of the possibility to insert a stimuli-responsive co-monomer in their structure. This review discusses recent advances in the use of external stimuli to modulate drug release, as well as the synthetic strategies devoted to increase the water compatibility of these systems, which is a base requirement for their application in biomedicine.

EXPERT OPINION

Although it is easy to imagine imprinted polymers for biomedical applications, several aspects have to be further investigated, such as the in vivo studies, efficiency and biocompatibility. However, we think that in the next few years it will possible to see unprecedented progress in the preparation of such systems and the translational application of these intelligent structures in medicine.

Molecularly imprinted polymers for the selective extraction of glycyrrhizic acid from liquorice roots

A new Molecularly Imprinted Solid Phase Extraction (MISPE) protocol was developed for the selective extraction and purification of glycyrrhizic acid (GL) from liquorice roots. Non-covalent MIP were synthesized using methacrylic acid (MAA), 2-(dimethylamino)ethyl methacrilate (DMAEM) or 2-hydroxyethylmetacrylate (HEMA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent.

After the evaluation of the selectivity of the GL imprinted polymers, the performance of these materials as Solid Phase Extraction (SPE) sorbents was investigated. MIP having HEMA as functional monomer were found to be able to selectively extract almost 80% of GL content in liquorice roots. The proposed MISPE-HPLC procedure has good precision, thus it can be successfully used for the purification of GL from natural sources.