Fabrication and characterisation of self-applicating heparin sodium microneedle patches

Design and formulation of fast-dissolving microneedles for the rapid transdermal delivery of lorazepam

This study investigates lorazepam-loaded dissolving microneedles (LMNs) as a fast-acting and minimally invasive treatment for status epilepticus. The LMNs were developed using a micro-moulding technique with an optimised combination of PVP K30, Dextran 40 and Pullulan. Their stability was confirmed through Fourier transform infra-red (FTIR) spectroscopy and X-ray diffraction (XRD) analysis. The Parafilm® membrane insertion test demonstrated 100% penetration efficiency, verifying their ability to effectively pierce the skin. Scanning electron microscopy (SEM) imaging revealed well-defined microneedles with precise dimensions (800 µm height, 200 µm base and 500 µm pitch). The LMNs rapidly dissolved in the subdermal layer of porcine skin. An ex vivo drug diffusion study showed that 3-5% of the encapsulated lorazepam was released within 30 min, with a cumulative release of 79.3% over 24 h. An acute dermal irritation study confirmed the biocompatibility and skin tolerance of the LMNs. Additionally, an in vivo anti-convulsant efficacy study in Albino Wistar rats subjected to maximal electroshock seizures demonstrated significant anticonvulsant effects (p < .05), confirming efficient systemic delivery of lorazepam. These findings highlight LMNs as a rapid-acting, non-invasive transdermal drug delivery system for managing status epilepticus, particularly in ambulatory care settings.

Recent advances in microneedles for enhanced functional angiogenesis and vascular drug delivery

Many therapeutic applications use the transdermal method to avoid the severe restrictions associated with oral medication delivery. Given the limitations of traditional drug delivery via skin, transdermal microneedle (MN) arrays have been reported to be versatile and very efficient devices due to their outstanding characteristics such as painless penetration, affordability, excellent medicinal efficacy, and relative safety. MNs have recently received increased attention for their ability to cure vascular illnesses such as hypertension and thrombosis, as well as promote wound healing via the angiogenesis impact. The integrant of method manufacturing and biodegradable material allows for the modification of MN form and drug release pattern, hence increasing the flexibility of such drug delivery. In this review, we focused on recent improvements in MN-mediated transdermal administration of protein and peptide medicines for improved functional angiogenesis and vascular therapy. We also provide an overview of the present applications of MNs-mediated transdermal protein and peptide administration, particularly in the realm of vascular system disease therapy. Finally, the current state of clinical translation and a forecast for future progress are provided.

Hispidulin-rich fraction of Clerodendrum fragrans Wild. (Sesewanua) dissolving microneedle as antithrombosis candidate: A proof of concept study

Existing conventional antithrombosis drugs have caused many side effects, opening up opportunities for the development of new thrombotic drugs. There is potential to use the hispidulin-rich fraction of sesewanua (HRFS) as a new antithrombotic. The oral route limitation of hispidulin, as a low water solubility and non-polar compound, can be addressed. This study explores the potential of HRFS in the form of dissolving microneedles (DMN). The formula was created using polymers such as polyvinyl alcohol (PVA), polyvinyl pyrrolidone K-30 (PVP), and non-ionic surfactant. Ex vivo permeation studies found that 184.95 µg/cm2 of hispidulin was released 60 h after the best formulation. After 14 days of applying HRFS-DMN, the anticoagulant and antioxidant activity in male albino rats showed higher Activated Partial Thromboplastin Time (aPTT) and Prothrombin Time (PT) values and lower Inter Cellular Adhesion Molecule-1 (ICAM-1) values. No statistically significant differences were found between the effects of two and four HRFS-DMN and the injection of heparin at a dosage of 200 IU per kilogram. However, notable distinctions were observed when comparing HRFS-DMN to negative controls, oral and quercetin as positive controls at anti-ICAM activity. The findings confirmed the feasibility of HRFS-DMN for thrombosis and its effectiveness in delivering Hispidulin (HIS) into the bloodstream. This DMN is non-irritating, safe, and painless, showing promising outcomes in enhancing the efficacy of thrombosis treatment via the transdermal route.

Particulate atomisation design methods for the development and engineering of advanced drug delivery systems: A review

The role and opportunities presented by particulate technologies (due to novel processing methods and advanced materials) have multiplied over the last few decades, leading to promising and ideal properties for drug delivery. For example, the dissolution and bioavailability of poorly soluble drug substances and achieving site- specific drug delivery with a desired release profile are crucial aspects of forming (to some extent) state-of-the-art platforms. Atomisation techniques are intended to achieve efficient control over particle size, improved processing time, improved drug loading efficiency, and the opportunity to encapsulate a broad range of viable yet sensitive therapeutic moieties. Particulate engineering through atomization is accomplished by employing various mechanisms such as air, no air, centrifugal, electrohydrodynamic, acoustic, and supercritical fluid driven processes. These driving forces overcome capillary stresses (e.g., liquid viscosity, surface tension) and transform formulation media (liquid) into fine droplets. More frequently, solvent removal, multiple methods are included to reduce the final size distribution. Nevertheless, a thorough understanding of fluid mechanics, thermodynamics, heat, and mass transfer is imperative to appreciate and predict outputs in real time. More so, in recent years, several advancements have been introduced to improve such processes through complex particle design coupled with quality by-design (QbD) yielding optimal particulate geometry in a predictable manner. Despite these valuable and numerous advancements, atomisation techniques face difficulty scaling up from laboratory scales to manufacturing industry scales. This review details the various atomisation techniques (from design to mechanism) along with examples of drug delivery systems developed. In addition, future perspectives and bottlenecks are provided while highlighting current and selected seminal developments in the field.

Enhancing linezolid activity in the treatment of oral biofilms using novel chitosan microneedles with iontophoretic control

This study aimed to prepare and assess active microneedle (MN) patches based on a novel biomaterial and their effective coupled (physical and electrical) transdermal delivery of a model drug (Linezoid). Modified MN patches (e.g. fabricated from Linezoid, boronated chitosan, polyvinyl alcohol and D-sorbitol) were engineered using a vacuum micromoulding method. Physicochemical, FTIR (Fourier transform infrared), in-silico, structural and thermal analysis of prepared formulations were conducted to ascertain MN quality, composition and integrity. In-vitro mechanical tests, membrane toxicity, drug release, antibiofilm, ex-vivo mucoadhesion, insertion and in-vivo antibiofilm studies were performed to further validate viability of the coupled system. Optimized MN patch formulation (CSHP3 - comprising of 3 % w/v boronated chitosan, 3.5 % w/v PVA and 10 % w/w D-sorbitol) exhibited sharp-tipped, equi-distant and uniform-surfaced micron-scaled projections with conforming physicochemical features. FTIR analysis confirmed modification (i.e., boronation) of chitosan and compatibility as well as interaction between CSHP3 constituents. In-silico analysis indicated non-covalent interactions between all formulation constituents. Moreover, boronated chitosan-mucin glycoprotein complex showed a stronger bonding (∼1.86 times higher CScore) as compared to linezolid-mucin counterpart. Thermal analysis indicated amorphous nature of CSHP3. A ∼ 1.42 times higher tensile strength was displayed by CSHP3 as compared to control (i.e., pure chitosan, polyvinyl alcohol and D-sorbitol-based MN patch). Membrane toxicity study indicated non-toxic and physiological compatible nature of CSHP3. Within 90 min, 91.99 ± 2.3 % linezolid was released from CSHP3. During release study on agarose gel, CSHP3-iontophoresis treatment resulted in a ∼ 1.78 and ∼ 1.20 times higher methylene blue-covered area and optical density, respectively, within 60 min as compared to CSHP3 treatment alone. Staphylococcus aureus biofilms treated with CSHP3 exhibited 65 ± 4.2 % reduction in their mass. CSHP3 MN patches remained adhered to the rabbit oral mucosa for 6 ± 0.15 h. Mucosa treated with CSHP3 and CSHP3-iontophoresis combination showed a generation of pathways in the epithelium layers without any damage to the underlying lamina propria. Eradication of Staphylococcus aureus from oral mucosal wounds and complete tissue regeneration was recorded following 7-day treatment using CSHP3-iontophoresis coupled approach.

Microneedles mediated-dermal delivery of Vitamin C: Formulation, characterization, cytotoxicity, and enhancement of stability

Vitamin C (VIT C) is an antioxidant that prevents skin aging. Although dermal delivery is one of the most effective routes to transport VIT C to the skin, the impact of this route can be limited by the barrier function of the stratum corneum (SC). Additionally, VIT C rapidly oxidized and degraded under light and temperature. Therefore, this study provides an approach to utilizing microneedles (MNs) to improve the dermal delivery of VIT C and enhance its stability by incorporating a stabilizing system of ethylenediaminetetraacetic acid (EDTA) and sodium metabisulfite (Meta) within the MNs. Vitamin C microneedles (VIT C MNs) were fabricated using different biodegradable polymers and various concentrations of EDTA/Meta. VIT C MNs were evaluated for morphology, VIT C content, mechanical properties, dissolution rate, needles' insertion, physicochemical properties, ex vivo permeation, viscosity of VIT C polymeric solutions, cytotoxicity, and stability. The results showed that VIT C MNs were uniform and mechanically strong. The recovery of VIT C in MNs was 88.3-90.0 %. The dissolution rate of MNs was <30 min. The flux of VIT C varied based on the composition of MNs. VIT C MNs demonstrated safety against human dermal fibroblasts. VIT C MNs with EDTA/Meta (0.1/0.3 %) were stable under different storage conditions for two months. In conclusion, VIT C MNs were successfully developed using biodegradable polymers, and the stabilizing system (EDTA/META) provided a stable dermal delivery system for VIT C to protect skin from aging.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Transcutaneous Delivery of Dexamethasone Sodium Phosphate Via Microneedle-Assisted Iontophoretic Enhancement - A Potential Therapeutic Option for Inflammatory Disorders

AIM

This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats.

METHODS

Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis.

RESULTS

MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%).

CONCLUSION

MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.

Advancements in transdermal drug delivery: A comprehensive review of physical penetration enhancement techniques

Transdermal drug administration has grown in popularity in the pharmaceutical research community due to its potential to improve drug bioavailability, compliance among patients, and therapeutic effectiveness. To overcome the substantial barrier posed by the stratum corneum (SC) and promote drug absorption within the skin, various physical penetration augmentation approaches have been devised. This review article delves into popular physical penetration augmentation techniques, which include sonophoresis, iontophoresis, magnetophoresis, thermophoresis, needle-free injection, and microneedles (MNs) Sonophoresis is a technique that uses low-frequency ultrasonic waves to break the skin's barrier characteristics, therefore improving drug transport and distribution. In contrast, iontophoresis uses an applied electric current to push charged molecules of drugs inside the skin, effectively enhancing medication absorption. Magnetophoresis uses magnetic fields to drive drug carriers into the dermis, a technology that has shown promise in aiding targeted medication delivery. Thermophoresis is the regulated heating of the skin in order to improve drug absorption, particularly with thermally sensitive drug carriers. Needle-free injection technologies, such as jet injectors (JIs) and microprojection arrays, offer another option by producing temporary small pore sizes in the skin, facilitating painless and effective drug delivery. MNs are a painless, minimally invasive method, easy to self-administration, as well as high drug bioavailability. This study focuses on the underlying processes, current breakthroughs, and limitations connected with all of these approaches, with an emphasis on their applicability in diverse therapeutic areas. Finally, a thorough knowledge of these physical enhancement approaches and their incorporation into pharmaceutical research has the potential to revolutionize drug delivery, providing more efficient and secure treatment choices for a wide range of health-related diseases.

Protein-based microneedles for biomedical applications: A systematic review

Microneedles are minimally-invasive devices with the unique capability of bypassing physiological barriers. Hence, they are widely used for different applications from drug/vaccine delivery to diagnosis and cosmetic fields. Recently, natural biopolymers (particularly carbohydrates and proteins) have garnered attention as safe and biocompatible materials with tailorable features for microneedle construction. Several review articles have dealt with carbohydrate-based microneedles. This review aims to highlight the less-noticed role of proteins through a systematic search strategy based on the PRISMA guideline from international databases of PubMed, Science Direct, Scopus, and Google Scholar. Original English articles with the keyword "microneedle(s)" in their titles along with at least one of the keywords "biopolymers, silk, gelatin, collagen, zein, keratin, fish-scale, mussel, and suckerin" were collected and those in which the proteins undertook a structural role were screened. Then, we focused on the structures and applications of protein-based microneedles. Also, the unique features of some protein biopolymers that make them ideal for microneedle construction (e.g., excellent mechanical strength, self-adhesion, and self-assembly), as well as the challenges associated with them were reviewed. Altogether, the proteins identified so far seem not only promising for the fabrication of "better" microneedles in the future but also inspiring for designing biomimetic structural biopolymers with ideal characteristics.

3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications

Microneedle (MN) technology is an optimal choice for the delivery of drugs via the transdermal route, with a minimally invasive procedure. MN applications are varied from drug delivery, cosmetics, tissue engineering, vaccine delivery, and disease diagnostics. The MN is a biomedical device that offers many advantages including but not limited to a painless experience, being time-effective, and real-time sensing. This research implements additive manufacturing (AM) technology to fabricate MN arrays for advanced therapeutic applications. Stereolithography (SLA) was used to fabricate six MN designs with three aspect ratios. The MN array included conical-shaped 100 needles (10 × 10 needle) in each array. The microneedles were characterized using optical and scanning electron microscopy to evaluate the dimensional accuracy. Further, mechanical and insertion tests were performed to analyze the mechanical strength and skin penetration capabilities of the polymeric MN. MNs with higher aspect ratios had higher deformation characteristics suitable for penetration to deeper levels beyond the stratum corneum. MNs with both 0.3 mm and 0.4 mm base diameters displayed consistent force-displacement behavior during a skin-equivalent penetration test. This research establishes guidelines for fabricating polymeric MN for high-accuracy and low-cost 3D printing.

Microneedles for advanced ocular drug delivery

In the field of ocular drug delivery, topical delivery remains the most common treatment option for managing anterior segment diseases, whileintraocular injectionsare the current gold standard treatment option for treating posterior segment diseases. Nonetheless, topical eye drops are associated with low bioavailability (<5%), and theintravitreal administration procedure is highly invasive, yielding poor patient acceptability. In both cases, frequent administration is currently required. As a result, there is a clear unmet need for sustained drug delivery to the eye, particularly in a manner that can be localised. Microneedles, which are patches containing an array of micron-scale needles (<1 mm), have the potential to meet this need. These platforms can enable localised drug delivery to the eye while enhancing penetration of drug molecules through key ocular barriers, thereby improving overall therapeutic outcomes. Moreover, the minimally invasive manner in which microneedles are applied could provide significant advantages over traditional intravitreal injections regarding patient acceptability. Considering the benefitsofthis novel ocular delivery system, this review provides an in-depth overviewofthe microneedle systems for ocular drug delivery, including the types of microneedles used and therapeutics delivered. Notably, we outline and discuss the current challenges associated with the clinical translation of these platforms and offer opinions on factors which should be considered to improve such transition from lab to clinic.

Improved Transdermal Delivery of Rabies Vaccine using Iontophoresis Coupled Microneedle Approach

AIM

This study was aimed to develop rabies vaccine incorporated microneedle (MN) patches and evaluate the immunogenicity of prepared formulations in combination with iontophoresis.

METHODS

Patches comprising of polyvinyl pyrrolidone, hyaluronic acid and polyethylene glycol 400 were engineered by vacuum micromolding technique. Physical evaluation of patches included determination of folding endurance, % swelling and morphological features. In vitro release study was performed in skin simulant agarose gel using model drug (methylene blue) loaded patches. In vitro insertion ability was assessed using stratum corneum simulant parafilm. In vivo insertion study was performed in rats. Immunogenicity was evaluated in dogs by determining immunoglobulin G (IgG) and rabies virus neutralizing antibodies (RVNA) titer.

RESULTS

Patches displayed uniformly distributed microprojections with pointed tips and smooth surface,  ~ 70% swelling, remained intact for  ~ 200 foldings and successfully penetrated the parafilm. The area covered by model drug across agarose gel was almost double following treatment with MN-iontophoresis combination (MNdi) compared to MN alone (MNdo). Histological examination of rat skin treated with vaccine laden MN (MNvo) and MN-iontophoresis combination (MNvi) confirmed the formation of grooves in epidermis without any damage to the deep vasculature. A ~ 73% and  ~ 206% increase (compared to untreated counterpart) was observed in the IgG titer of MNvo and MNvi treated dogs, respectively. The RVNA titer was increased by  ~ 1.2 and  ~ 2.2 times (compared to threshold value) after MNvo and MNvi treatment, respectively.

CONCLUSION

MN-iontophoresis combination provided relatively potent immunogenic response over the conventional intramuscular injection, hence, can be used for administering vaccines transcutaneously.

Engineering of clarithromycin loaded stimulus responsive dissolving microneedle patches for the treatment of biofilms

This study aimed to fabricate clarithromycin laden Eudragit S-100-based microfibers (MF), microfibers coated film (MB), clarithromycin loaded polyvinyl pyrollidone, hyaluronic acid and sorbitol-based dissolving microneedle patches (CP) and microfibers coated microneedle patches (MP). Morphological and phase analysis of formulations were carried out by scanning electron microscopy and differential scanning calorimetry, X-ray diffraction, respectively. Substrate liquefaction test, in vitro drug release, antimicrobial assay and in vivo antibiofilm studies were performed. MF exhibited a uniform surface and interconnected network. Morphological analysis of CP revealed sharp-tipped and uniform-surfaced microstructures. Clarithromycin was incorporated within MF and CP as amorphous solid. Liquefaction test indicated hyaluronate lyase enzyme responsiveness of hyaluronic acid. Fibers-based formulations (MF, MB and MP) provided an alkaline pH (7.4) responsive drug release; ∼79 %, ∼78 % and ∼81 %, respectively within 2 hours. CP showed a drug release of ∼82 % within 2 hours. MP showed ∼13 % larger inhibitory zone against Staphylococcus aureus (S. aureus) as compared to MB and CP. A relatively rapid eradication of S. aureus in infected wounds and subsequent skin regeneration was observed following MP application as compared to MB and CP indicating its usefulness for the management of microbial biofilms.

Engineering of tetanus toxoid-loaded polymeric microneedle patches

This study is aimed to fabricate tetanus toxoid laden microneedle patches by using a polymeric blend comprising of polyvinyl pyrrolidone and sodium carboxymethyl cellulose as base materials and sorbitol as a plasticizer. The tetanus toxoid was mixed with polymeric blend and patches were prepared by using vacuum micromolding technique. Microneedle patches were evaluated for physical attributes such as uniformity of thickness, folding endurance, and swelling profile. Morphological features were assessed by optical and scanning electron microscopy. In vitro performance of fabricated patches was studied by using bicinchoninic acid assay (BCA). Insertion ability of microstructures was studied in vitro on model skin parafilm and in vivo in albino rat. In vivo immunogenic activity of the formulation was assessed by recording immunoglobulin G (IgG) levels, interferon gamma (IFN-γ) levels, and T-cell (CD4⁺ and CD8⁺) count following the application of dosage forms. Prepared patches, displaying sharp-tipped and smooth-surfaced microstructures, remained intact after 350 ± 36 foldings. Optimized microneedle patch formulation showed ~ 74% swelling and ~ 85.6% vaccine release within an hour. The microneedles successfully pierced parafilm. Histological examination of microneedle-treated rat skin confirmed disruption of epidermis without damaging the underneath vasculature. A significant increase in IgG levels (~ 21%), IFN-γ levels (~ 30%), CD4⁺ (~ 41.5%), and CD8⁺ (~ 48.5%) cell count was observed in tetanus vaccine-loaded microneedle patches treated albino rats with respect to control (untreated) group at 42nd day of immunization. In conclusion, tetanus toxoid-loaded microneedle patches can be considered as an efficient choice for transdermal delivery of vaccine without inducing pain commonly experienced with hypodermic needles.

Transdermal delivery of celecoxib and α-linolenic acid from microemulsion-incorporated dissolving microneedles for enhanced osteoarthritis therapy

Dissolving microneedles, the promising vehicles for transdermal delivery, are incapable of directly loading hydrophobic components that limit the application of transdermal drug delivery. Microemulsion holds great potential in the solubilisation of water-insoluble drugs but is limited by the high epidermal retention. In this study, we fabricated microemulsion-incorporated dissolving microneedles co-loading celecoxib and α-linolenic acid (Cel-MEs@MNs) for enhancing osteoarthritis (OA) therapy via synergistic anti-inflammation and potent transdermal delivery. Cel-MEs@MNs composed of celecoxib & α-linolenic acid-coloaded microemulsion (Cel-MEs) and hyaluronic acid-based microneedles (MNs) can be completely dissolved in 90 s with a particle size of ∼30 nm. Each microneedle array with a hardness exceeding 30 N contained 57.9 ± 2.5 μg of celecoxib and 442.5 ± 24.2 μg of α-linolenic acid. The 8 h-cumulative transdermal of celecoxib from Cel-MEs@MNs was 89.2 ± 5.1 μg celecoxib/cm², which is 2.98-fold higher than that from Cel-MEs. Combinational celecoxib and α-linolenic acid with a weight ratio of 1/5 can synergistically induce M1-like macrophage to M2 repolarization, reduce M1-like macrophages-resulted chondrocytes apoptosis, and lower serum prostaglandin E-2 (PGE-2). Notably, Cel-MEs@MNs amplified such collaborated anti-inflammatory effects. More importantly, in the treatment of OA-bearing rat models, Cel-MEs@MNs with a half-dose of celecoxib and α-linolenic acid significantly shrunk the paw swelling, reduced inflammatory cytokines, and improved cartilage damage compared with the oral administration of celecoxib and α-linolenic acid, as well as transdermal administration of Cel-MEs. Such an integrational strategy of microemulsion-incorporated dissolving MNs offers the feasibility of combinational celecoxib and α-linolenic acid in transdermal permeation and boosted OA therapy.

Microneedle mediated transdermal delivery of β-sitosterol loaded nanostructured lipid nanoparticles for androgenic alopecia

Plant-derived 5 α-reductase inhibitors, such as β-sitosterol and phytosterol glycosides, have been used to treat androgenic alopecia, but their oral absolute bioavailability is poor. This study aimed to develop a transdermal drug delivery system of β-sitosterol (BS) using a nanostructured lipid carrier (NLC) incorporated into polymeric microneedles (MN). Using a high-speed homogenization method, NLC was formulated variables were optimized by Box-Behnken statistical design. The optimized formulation of BS-loaded NLCs was incorporated into the chitosan-based MNs to prepare NLC-loaded polymeric MNs (NLC-MNs) and evaluated using testosterone induced alopecia rats. The cumulative amount of β-sitosterol associated with NLC- MN which penetrated the rat skin in-vitro was 3612.27 ± 120.81 μg/cm², while from the NLC preparation was 2402.35 ± 162.5 μg/cm². The steady state flux (J_ss) of NLC-MN was significantly higher than that of the optimized NLC formulation (P < 0.05). Anagen/telogen ratio was significantly affected by NLC and NLC-MN, which was 2.22 ± 0.34, 1.24 ± 0.18 respectively compared to 0.26 ± 0.08 for animal group treated with testosterone. The reversal of androgen-induced hair loss in animals treated with β-sitosterol was a sign of hair follicle dominance in the anagenic growth phase. However, NLC-MN delivery system has shown significant enhancement of hair growth in rats. From these experimental data, it can be concluded that NLC incorporated MN transdermal system have potential in effective treatment of androgenic alopecia.

Preparation and characterization of flexible furosemide-loaded biodegradable microneedles for intradermal drug delivery

Transdermal drug delivery systems are a useful and minimally invasive alternative to other drug administration routes. Biodegradable polymeric microneedles (MNs) are widely used in controlled-release drug delivery due to their tunable properties and ease of patient self-administration. Polylactic-co-glycolic acid (PLGA) is often used for sustained drug release owing to special intrinsic properties including biocompatibility and biodegradability, which offer excellent applicability in preparing MNs. Congestive heart failure (CHF) is characterized by fluid overload during acute exacerbation, necessitating frequent patient hospitalization for continuous intravenous (i.v.) diuretic therapy. In the present study, we incorporated furosemide (FUR) as a model drug into flexible PLGA MN skin patches for potential intradermal delivery to overcome the limitations associated with i.v. diuresis. The MNs were fabricated by a casting-mold technique and consisted of two main parts, PLGA needle tips loaded with varying concentrations of FUR and a flexible backing layer comprising sodium alginate and glycerol. MN formulations were characterized by SEM and exhibited a uniform pyramidal shape. The measured surface pH of all samples suggested that no skin irritation is expected upon application. High encapsulation efficiency was obtained for FUR-MN formulations in which a decrease was noted as the FUR/PLGA ratio decreased. Drug loading content ranged from 19.1 ± 1% to 28.9 ± 1.4%. Successful insertion of MNs into a Parafilm® skin simulant model suggested that MNs will easily penetrate the skin's outermost layer, the stratum corneum, and will permit intradermal delivery of FUR. The MNs were further characterized by analytical methods. Finally, the MNs exhibited an initial burst release followed by a sustained release of FUR. Self-administered FUR-MNs can open new avenues to overcome i.v. drip limitations and increase patient compliance.

Recent Advancements in Microneedle Technology for Multifaceted Biomedical Applications

Microneedle (MNs) technology is a recent advancement in biomedical science across the globe. The current limitations of drug delivery, like poor absorption, low bioavailability, inadequate skin permeation, and poor biodistribution, can be overcome by MN-based drug delivery. Nanotechnology made significant changes in fabrication techniques for microneedles (MNs) and design shifted from conventional to novel, using various types of natural and synthetic materials and their combinations. Nowadays, MNs technology has gained popularity worldwide in biomedical research and drug delivery technology due to its multifaceted and broad-spectrum applications. This review broadly discusses MN's types, fabrication methods, composition, characterization, applications, recent advancements, and global intellectual scenarios.

Minoxidil-loaded hyaluronic acid dissolving microneedles to alleviate hair loss in an alopecia animal model

Alopecia is defined as hair loss in a part of the head due to various causes, such as drugs, stress and autoimmune disorders. Various therapeutic agents have been suggested depending on the cause of the condition and patient sex, and age. Minoxidil (MXD) is commonly used topically to treat alopecia, but its low absorption rate limits widespread use. To overcome the low absorption, we suggest microneedles (MNs) as controlled drug delivery systems that release MXD. We used hyaluronic acid (HA) to construct MN, as it is biocompatible and safe. We examined the effect of HA on the hair dermal papilla (HDP) cells that control the development of hair follicles. HA enhanced proliferation, migration, and aggregation of HDP cell by increasing cell-cell adhesion and decreasing cell substratum. These effects were mediated by the cluster of differentiation (CD)-44 and phosphorylation of serine‑threonine kinase (Akt). In chemotherapy-induced alopecia mice, topical application of HA tended to decrease chemotherapy-induced hair loss. Although the amount of MXD administered by HA-MNs was 10% of topical treatment, the MXD-containing HA-MNs (MXD-HA-MNs) showed better effects on the growth of hair than topical application of MXD. In summary, our results demonstrated that HA reduces hair loss in alopecia mice, and that delivery of MXD and HA using MXD-HA-MNs maximizes therapeutic effects and minimize the side effects of MXD for the treatment of alopecia. STATEMENT OF SIGNIFICANCE: (1) Significance, This work reports a new approach for treatment of alopecia using a dissolving microneedle (MN) prepared with hyaluronic acid (HA). The HA provided a better environment for cellular functions in the hair dermal papilla cells. The HA-MNs containing minoxidil (MXD) exhibited a significant reduction of hair loss, although amount of MXD contained in them was only 10% of topically applied MXD., (2) Scientific impact, This is the first report demonstrating the direct anti-alopecia effects of HA administrated in a transdermal route and the feasibility of novel therapeutics using MXD-containing HA-MNs. We believe that our work will excite interdisciplinary readers of Acta Biomaterialia, those who are interested in the natural polymers, drug delivery, and alopecia.

A Key Role by Polymers in Microneedle Technology: A New Era

The skin serves as the major organ in the targeted transdermal drug delivery system for many compounds. The microneedle acts as a novel technique to deliver drugs across the different layers of the skin, including the major barrier stratum corneum, in an effective manner. A microneedle array patch comprises dozens to hundreds of micron-sized needles with numerous structures and advantages resulting from their special and smart designs. Microneedle approach is much more advanced than conventional transdermal delivery pathways due to several benefits like minimally invasive, painless, self-administrable, and enhanced patient compliance. The microneedles are classified into hollow, solid, coated, dissolving, and hydrogel. Several polymers are used to fabricate microneedle, such as natural, semi-synthetic, synthetic, biodegradable, and swellable polymers. Researchers in the preparation of microneedles also explored the combinations of polymers. The safety of the polymer used in microneedle is a crucial aspect to prevent toxicity in vivo. Thus, this review aims to provide a detailed review of microneedles and mainly focus on the various polymers used in the fabrication of microneedles.

Skin Patchable Sensor Surveillance for Continuous Glucose Monitoring

Diabetes mellitus is a physiological and metabolic disorder affecting millions of people worldwide, associated with global morbidity, mortality, and financial expenses. Long-term complications can be avoided by frequent, continuous self-monitoring of blood glucose. Therefore, this review summarizes the current state-of-art glycemic control regimes involving measurement approaches and basic concepts. Following an introduction to the significance of continuous glucose sensing, we have tracked the evolution of glucose monitoring devices from minimally invasive to non-invasive methods to present an overview of the spectrum of continuous glucose monitoring (CGM) technologies. The conveniences, accuracy, and cost-effectiveness of the real-time CGM systems (rt-CGMs) are the factors considered for discussion. Transdermal biosensing and drug delivery routes have recently emerged as an innovative approach to substitute hypodermal needles. This work reviews skin-patchable glucose monitoring sensors for the first time, providing specifics of all the major findings in the past 6 years. Skin patch sensors and their progressive form, i.e., microneedle (MN) array sensory and delivery systems, are elaborated, covering self-powered, enzymatic, and non-enzymatic devices. The critical aspects reviewed are material design and assembly techniques focusing on flexibility, sensitivity, selectivity, biocompatibility, and user-end comfort. The review highlights the advantages of patchable MNs' multi-sensor technology designed to maintain precise blood glucose levels and administer diabetes drugs or insulin through a "sense and act" feedback loop. Subsequently, the limitations and potential challenges encountered from the MN array as rt-CGMs are listed. Furthermore, the current statuses of working prototype glucose-responsive "closed-loop" insulin delivery systems are discussed. Finally, the expected future developments and outlooks in clinical applications are discussed.

Application of armodafinil-loaded microneedle patches against the negative influence induced by sleep deprivation

Cognition maintenance is essential for healthy and safe life if sleep deprivation happens. Armodafinil is a wake-promoting agent against sleep deprivation related disorders. However, only the tablet formulation is available, which may limit its potential in some circumstances. Here, we report the synthesis of a new formulation of armodafinil, microneedle patches, which can be conveniently used by any individual and removed in time if not wanted. To produce the needles of higher mechanical strength and higher drug loading, polyvinylpyrrolidone (PVP) K90 was used to fabricate armodafinil-loaded microneedles by applying the mold casting method after dissolving in methanol and drying. The higher mechanical strength was validated by COMSOL Multiphysics® software stimulation and universal mechanical testing machines. The obtained armodafinil microneedles can withstand a force of 70 N and penetrate the skin to a depth of 230 μm, and quickly released the drug within 1.5 h in vitro. The pharmacokinetic analysis showed that microneedle administration can maintain a more lasting and stable blood concentration as compared to oral administration. After the treatment of sleep deprived mice with microneedles, the in vivo pharmacodynamics study clearly demonstrated that armodafinil microneedles could eliminate the effects of sleep deprivation and improve the cognitive functions of sleep-deprived mice. A self-administered, high drug-loaded microneedle patch were prepared successfully, which appeared to be highly promising in preserving cognition by transdermal administration.

Microneedle based adipose derived stem cells-derived extracellular vesicles therapy ameliorates UV-induced photoaging in SKH-1 mice

Extracellular vesicles from adipose derived stem cells (ADSCs-EVs) have shown immunomodulation and anti-photoaging effects; however, the skin barrier prevents their absorption via skin. Meanwhile, microneedle (MN) is a widely used and minimally invasive tool for dermal delivery of drugs, it also has neocollagenesis effect by creating tiny injuries and initiating wound healing process. To investigate the effect of MN combined with ADSCs-EVs on skin aging, photoaging in SKH-1 mice was induced by chronic exposure to ultraviolet radiation. Then the mice were treated following a split-dorsal scheme, in which one side had MN alone or MN + EVs treatment and the other side was left untreated. For the side treated with MN alone or MN + EVs, the epidermal thickness was decreased and the skin barrier function was enhanced compared with the untreated side. However, MN + EVs group showed the least wrinkles, the highest collagen density and the most organized collagen fibers among the three groups. The level of CD11b + cell infiltration was lower in MN + EVs group than that in the MN group at 3 day after the treatment. These results indicated that MN treatment alone could improve epidermal structure and function of photoaging skin, and a combination with ADSCs-EVs would accelerate the restoration of inflammation caused by MN and improve the content of collagen. In all, this study indicated that a combination of MN and topical applied ADSCs-EVs was a feasible and safe strategy to ameliorate photoaging, providing a new avenue for safe administration of EVs.

Design and Evaluation of Dissolving Microneedles for Enhanced Dermal Delivery of Propranolol Hydrochloride

Oral propranolol hydrochloride has been the first-line treatment for infantile hemangioma (IH), whereas systemic exposure to propranolol has the potential of causing serious adverse reactions. Dermal delivery of propranolol is preferable due to high local drug concentration and fewer adverse effects. However, propranolol hydrochloride (BCS class I) is highly hydrophilic and has difficulty in penetrating the stratum corneum (SC) barrier. Dissolving microneedles (MNs) are an efficient tool for overcoming the barrier of the SC and enhancing dermal drug delivery. In this study, propranolol hydrochloride-loaded dissolving MNs were fabricated by using hyaluronic acid and polyvinyl pyrrolidone as matrix materials. Controllable drug loading in needle tips was achieved by a two-step casting procedure. The needles were good in mechanical strength for penetrating the SC while presented excellent dissolving capability for releasing propranolol hydrochloride. In comparison with the solution counterpart, irrespective of being applied to intact skin or solid MNs-pretreated skin, dissolving MNs significantly increased the permeability and skin retention of propranolol. In conclusion, dissolving MNs could be a potential approach for enhancing dermal delivery of propranolol to treat IH.

Antibiofilm Effects of Macrolide Loaded Microneedle Patches: Prospects in Healing Infected Wounds

AIM

The aim of this study was to fabricate polymeric microneedles, loaded with macrolides (erythromycin, azithromycin), using hyaluronic acid and polyvinyl pyrollidone.

METHODS

These microneedles were fabricated using a vacuum micromolding technique. The integrity of the microneedle patches was studied by recording their morphologic features, folding endurance, swelling and micro-piercing. Physicochemical characteristics were studied by differential scanning calorimetry, thermogravimetric analysis and fourier transform infrared spectroscopy. In-vitro drug release, antibiofilm and effect of microneedle patch on wound healing were also studied to confirm the efficacy of the formulations.

RESULTS

Formulated patches displayed acceptable folding endurance (>100) and uniform distribution of microneedles (10 × 10) that can penetrate parafilm. Differential scanning calorimetry results depict a decrease in the crystallinity of macrolides following their incorporation in to a polymer matrix. Percentage release of azithromycin and erythromycin from the polymeric patch formulations (over 30 min) was 90% and 63% respectively. Broadly, the zone of bacterial growth inhibition follows the same order for Staphylococcus aureus, Escherichia coli and Salmonella enterica. After 5 days of treatment with azithromycin patches, the wound healing was complete and skin structure (e.g. hair follicles and dermis) was regenerated.

CONCLUSION

It was concluded that azithromycin loaded microneedle patches can be used to treat biofilms in the infected wounds.

COVID-19: Current Developments and Further Opportunities in Drug Delivery and Therapeutics

SARS-CoV-2 has affected people from all age groups, races and ethnicities. Given that many infected individuals are asymptomatic, they transmit the disease to others unknowingly, which has resulted in the spread of infection at an alarming rate. This review aims to provide an overview of the pathophysiology, preventive measures to reduce the disease spread, therapies currently in use, an update on vaccine development and opportunities for vaccine delivery. The World Health Organization has advised several precautions including social distancing, hand washing and the use of PPE including gloves and face masks for minimizing the spread of SARS-CoV-2 infection. At present, several antiviral therapies previously approved for other infections are being repositioned to study their efficacy against SARS-CoV-2. In addition, some medicines (i.e., remdesivir, chloroquine, hydroxychloroquine) have received emergency use authorisation from the FDA. Plasma therapy has also been authorised for emergency use for the treatment of COVID-19 on a smaller scale. However, no vaccine has been approved so far against this virus. Nevertheless, several potential vaccine targets have been reported, and development of different types of vaccines including DNA, mRNA, viral vector, inactivated, subunit and vaccine-like particles is in process. It is concluded that a suitable candidate delivered through an advanced drug delivery approach would effectively boost the immune system against this coronavirus.