Comparison of chito-oligosaccharide production from three different colloidal chitosans using the endochitonsanolytic system of Bacillus thuringiensis

Biotechnological insights into extracellular enzyme production by thermotolerant fungi from hot springs and caves: Morphology, pellets formation, and protease production

This study investigates the thermotolerant fungal biodiversity in caves and hot springs, focusing on their potential for extracellular enzyme production, specifically proteases. Samples were collected from the Cardonal region in Hidalgo, Mexico, using three different isolation methods. The study characterizes the morphological diversity of the isolated fungi and identifies various genera, including Aspergillus, Penicillium, Trichoderma, Cladosporium, and Fusarium, based on morphology. The isolated fungi were screened for their ability to produce extracellular enzymes on solid media, with a particular emphasis on proteases due to their industrial significance. Among the 35 isolated fungi, 20 exhibited proteolytic activity, and 12 strains were identified as good protease producers based on enzymatic index values. The study also evaluated the formation of fungal pellets by proteolytic fungi and found certain strains to display significant pellet formation. Additionally, protease production was examined by fungal pellets in submerged cultures, with isolate 6 demonstrating the highest protease activity. The findings highlight the diverse thermotolerant fungal biodiversity in extreme environments, and emphasize their potential for enzymatic production. This research contributes to our understanding of fungal ecology and provides insights into the biotechnological applications of these enzymes. The study recommends further molecular investigations to enhance biodiversity studies in such extreme environments.

Chitosan and chito-oligosaccharide: a versatile biopolymer with endless grafting possibilities for multifarious applications

Chito-oligosaccharides (COS), derived from chitosan (CH), are attracting increasing attention as drug delivery carriers due to their biocompatibility, biodegradability, and mucoadhesive properties. Grafting, the process of chemically modifying CH/COS by adding side chains, has been used to improve their drug delivery performance by enhancing their stability, targeted delivery, and controlled release. In this review, we aim to provide an in-depth study on the recent advances in the grafting of CH/COS for multifarious applications. Moreover, the various strategies and techniques used for grafting, including chemical modification, enzymatic modification, and physical modification, are elaborated. The properties of grafted CH/COS, such as stability, solubility, and biocompatibility, were reported. Additionally, the review detailed the various applications of grafted CH/COS in drug delivery, including the delivery of small drug molecule, proteins, and RNA interference therapeutics. Furthermore, the effectiveness of grafted CH/COS in improving the pharmacokinetics and pharmacodynamics of drugs was included. Finally, the challenges and limitations associated with the use of grafted CH/COS for drug delivery and outline directions for future research are addressed. The insights provided in this review will be valuable for researchers and drug development professionals interested in the application of grafted CH/COS for multifarious applications.

Constitutive chitosanase from Bacillus thuringiensis B-387 and its potential for preparation of antimicrobial chitooligomers

The article proves the ability of the entomopathogenic strain B. thuringiensis var. dendrolimus B-387 to high the constitutive production (3-12.5 U/mL) of extracellular chitosanase, that was found for the first time. The enzyme was purified in 94-fold by ultrafiltration, affinity sorption and cation-exchange chromatography and characterized biochemically. The molecular mass of the chitosanase determined using SDS-PAGE is 40 kDa. Temperature and pH-optima of the enzyme are 55 ^°C and pH 6.5, respectively; the chitosanase was stable under 50-60 ^°C and pH 4-10.5. Purified chitosanase most rapidly (V_max ~ 43 µM/mL × min, K_M ~ 0.22 mg/mL, k_cat ~ 4.79 × 10⁴ s^-1) hydrolyzed soluble chitosan of the deacetylation degree (DD) 85% by endo-mode, and did not degrade colloidal chitin, CM-cellulose and some other glucans. The main reaction products of the chitosan enzymolysis included chitobiose, chitotriose and chitotetraose. In addition to small chitooligosaccharides (CHOs), the studied chitosanase also generated low-molecular weight chitosan (LMWC) with average M_w in range 14-46 kDa and recovery 14-35%, depending on the enzyme/substrate ratio and incubation temperature. In some cases, the chitosan (DD 85 and 50%) oligomers prepared using crude chitosanase from B. thuringiensis B-387 indicated higher antifungal and antibacterial activities in vitro in comparison with the initial polysaccharides. The data obtained indicate the good prospect of chitosanase B-387 for the production of bioactive CHOs.

Quality assessment and nutrient uptake and utilization in Luohan pine (Podocarpus macrophyllus) seedlings raised by chitosan spraying in varied LED spectra

Target seedling cultivation pursues high quality and nutrient utilization instead of increasing growth and size. Exposure to light-emitting diode (LED) spectra is a well-known approach that can accelerate growing speed in tree seedlings, but it is still unknown whether seedling quality and nutrient utilization would be further improved with exogeneous polymer additives. Luohan pine (Podocarpus macrophyllus) seedlings were exposed to red (red-green-blue lights, 71.7%-13.7%-14.6%), green (26.2%-56.4%-17.4%), and blue (17.8%-33.7%-48.5%) LED-light spectra with half receiving leaf spray by chitosan oligosaccharides (Cos) at a rate of 2 ppm (w/w) and the other half receiving only water. The red-light spectrum promoted height, biomass, nutrient utilization, and quality assessment (DQI) in water-sprayed seedlings. The Cos spray enhanced fine-root growth, protein, and chlorophyll-b contents with elevated nutrient utilization and quality in seedlings in the green-light spectrum. DQI was found to have a positive relationship with phosphorus utilization. In conclusion, although the red-light LED spectrum can promote seedling growth, green light combined with Cos spray is recommended with the aim of maintaining seedling quality and increasing P utilization in Luohan pine seedlings.

Root-TRAPR: a modular plant growth device to visualize root development and monitor growth parameters, as applied to an elicitor response of Cannabis sativa

BACKGROUND

Plant growth devices, for example, rhizoponics, rhizoboxes, and ecosystem fabrication (EcoFAB), have been developed to facilitate studies of plant root morphology and plant-microbe interactions in controlled laboratory settings. However, several of these designs are suitable only for studying small model plants such as Arabidopsis thaliana and Brachypodium distachyon and therefore require modification to be extended to larger plant species like crop plants. In addition, specific tools and technical skills needed for fabricating these devices may not be available to researchers. Hence, this study aimed to establish an alternative protocol to generate a larger, modular and reusable plant growth device based on different available resources.

RESULTS

Root-TRAPR (Root-Transparent, Reusable, Affordable three-dimensional Printed Rhizo-hydroponic) system was successfully developed. It consists of two main parts, an internal root growth chamber and an external structural frame. The internal root growth chamber comprises a polydimethylsiloxane (PDMS) gasket, microscope slide and acrylic sheet, while the external frame is printed from a three-dimensional (3D) printer and secured with nylon screws. To test the efficiency and applicability of the system, industrial hemp (Cannabis sativa) was grown with or without exposure to chitosan, a well-known plant elicitor used for stimulating plant defense. Plant root morphology was detected in the system, and plant tissues were easily collected and processed to examine plant biological responses. Upon chitosan treatment, chitinase and peroxidase activities increased in root tissues (1.7- and 2.3-fold, respectively) and exudates (7.2- and 21.6-fold, respectively). In addition, root to shoot ratio of phytohormone contents were increased in response to chitosan. Within 2 weeks of observation, hemp plants exhibited dwarf growth in the Root-TRAPR system, easing plant handling and allowing increased replication under limited growing space.

CONCLUSION

The Root-TRAPR system facilitates the exploration of root morphology and root exudate of C. sativa under controlled conditions and at a smaller scale. The device is easy to fabricate and applicable for investigating plant responses toward elicitor challenge. In addition, this fabrication protocol is adaptable to study other plants and can be applied to investigate plant physiology in different biological contexts, such as plant responses against biotic and abiotic stresses.

Advances in the preparation and assessment of the biological activities of chitosan oligosaccharides with different structural characteristics

Chitosan oligosaccharides (COSs) are widely used biopolymers that have been studied in relation to a variety of abnormal biological activities in the food and biomedical fields. Since different COS preparation technologies produce COS compounds with different structural characteristics, it has not yet been possible to determine whether one or more chito-oligomers are primarily responsible for the bioactivity of COSs. The inherent biocompatibility, mucosal adhesion and nontoxic nature of COSs are well documented, as is the fact that they are readily absorbed from the intestinal tract, but their structure-activity relationship requires further investigation. This review summarizes the methods used for COS preparation, and the research findings with regard to the antioxidant, anti-inflammatory, anti-obesity, bacteriostatic and antitumour activity of COSs with different structural characteristics. The correlation between the molecular structure and bioactivities of COSs is described, and new insights into their structure-activity relationship are provided.

Enzymatic Synthesis and Characterization of Different Families of Chitooligosaccharides and Their Bioactive Properties

Chitooligosaccharides (COS) are homo- or hetero-oligomers of D-glucosamine (GlcN) and N-acetyl-D-glucosamine (GlcNAc) that can be obtained by chitosan or chitin hydrolysis. Their enzymatic production is preferred over other methodologies (physical, chemical, etc.) due to the mild conditions required, the fewer amounts of waste and its efficiency to control product composition. By properly selecting the enzyme (chitinase, chitosanase or nonspecific enzymes) and the substrate properties (degree of deacetylation, molecular weight, etc.), it is possible to direct the synthesis towards any of the three COS types: fully acetylated (faCOS), partially acetylated (paCOS) and fully deacetylated (fdCOS). In this article, we review the main strategies to steer the COS production towards a specific group. The chemical characterization of COS by advanced techniques, e.g., high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and MALDI-TOF mass spectrometry, is critical for structure–function studies. The scaling of processes to synthesize specific COS mixtures is difficult due to the low solubility of chitin/chitosan, the heterogeneity of the reaction mixtures, and high amounts of salts. Enzyme immobilization can help to minimize such hurdles. The main bioactive properties of COS are herein reviewed. Finally, the anti-inflammatory activity of three COS mixtures was assayed in murine macrophages after stimulation with lipopolysaccharides.

Chitosan Oligosaccharide Addition to Buddhist Pine (Podocarpus macrophyllus (Thunb) Sweet) under Drought: Reponses in Ecophysiology and δ13C Abundance

Climate warming induces the necessity to increase the drought resistance of shade-obligate juvenile trees in sub-tropical forests. Chitosan oligosaccharide (COS) is a biopolymer derived from the marine resource that has attracted accumulative attention to induce and promote a plant’s resistance to abiotic stress. Buddhist pine (Podocarpus mascrophyllus (Thunb)Sweet) seedlings were cultured as the model material whose natural distribution in sub-tropical areas of China has suffered severe summer drought events in the last 113 years. A split-block design was conducted with a simulated drought event (drought vs. irrigated control), the COS addition, and two samplings at the ends of drought and re-watered treatments. The COS addition increased the resistance to drought by inducing a starch allocation towards roots where δ13C abundance and antioxidant enzyme activities were upregulated. The COS addition can promote biomass allocation to roots and increase the number of new roots. The COS addition to drought-treated Buddhist pine seedlings resulted in robust diameter growth. Therefore, COS is an available polymer to promote the resistance of Buddhist pine to drought. More work is suggested to clarify the dose of COS addition that can induce a prominent response of biomass accumulation and carbohydrate metabolism.

Production of chitosan-oligosaccharides by the chitin-hydrolytic system of Trichoderma harzianum and their antimicrobial and anticancer effects

Chitosan-oligosaccharides (COS) are low-molecular weight chitosan derivatives with interesting clinical applications. The optimization of both COS production and purification is an important step in the design of an efficient production system and for the exploration of new COS applications. Trichoderma harzianum is an innocuous biocontrol agent that represents a novel biotechnological tool due to the production of extracellular enzymes, including those that produce a COS mixture. In this work, we propose different systems for the production of COS using the T. harzianum chitinolitic system. A complete qualitative and quantitative analysis of a partially purified COS mixture were performed. Also, an evaluation of the anticancer and antimicrobial effects of the COS mixture was carried out. Three chitosan variants (colloidal, solid and solution) and two fungus stages (spores and mycelia) were tested for COS production. The best system consisted of the interaction of the solid chitosan and the fungal spores, producing a COS mixture containing species from the monomer to the hexamer, in a concentration range of 7-238 mg/mL, according to chromatographic analysis. The proposed purification method isolated the monomer and the dimer from the COS mixture. Moreover, the COS mixture has an inhibitory effect on the growth of bacteria and changes the morphology of yeasts. As anticancer compounds, COS inhibited the growth of cervical cancer cells at concentration of 4 mg/mL and significantly reduced the survival rate of the cells. In conclusion, T. harzianum proved to be an efficient system for COS mixture production.

Enzymatic Modifications of Chitin, Chitosan, and Chitooligosaccharides

Chitin and its N-deacetylated derivative chitosan are two biological polymers that have found numerous applications in recent years, but their further deployment suffers from limitations in obtaining a defined structure of the polymers using traditional conversion methods. The disadvantages of the currently used industrial methods of chitosan manufacturing and the increasing demand for a broad range of novel chitosan oligosaccharides (COS) with a fully defined architecture increase interest in chitin and chitosan-modifying enzymes. Enzymes such as chitinases, chitosanases, chitin deacetylases, and recently discovered lytic polysaccharide monooxygenases had attracted considerable interest in recent years. These proteins are already useful tools toward the biotechnological transformation of chitin into chitosan and chitooligosaccharides, especially when a controlled non-degradative and well-defined process is required. This review describes traditional and novel enzymatic methods of modification of chitin and its derivatives. Recent advances in chitin processing, discovery of increasing number of new, well-characterized enzymes and development of genetic engineering methods result in rapid expansion of the field. Enzymatic modification of chitin and chitosan may soon become competitive to conventional conversion methods.

Tailored Enzymatic Synthesis of Chitooligosaccharides with Different Deacetylation Degrees and Their Anti-Inflammatory Activity

By controlled hydrolysis of chitosan or chitin with different enzymes, three types of chitooligosaccharides (COS) with MW between 0.2 and 1.2 kDa were obtained: fully deacetylated (fdCOS), partially acetylated (paCOS), and fully acetylated (faCOS). The chemical composition of the samples was analyzed by high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD) and MALDI-TOF mass spectrometry. The synthesized fdCOS was basically formed by GlcN, (GlcN)2, (GlcN)3, and (GlcN)4. On the contrary, faCOS contained mostly GlcNAc, (GlcNAc)2 and (GlcNAc)3, while paCOS corresponded to a mixture of at least 11 oligosaccharides with different proportions of GlcNAc and GlcN. The anti-inflammatory activity of the three COS mixtures was studied by measuring their ability to reduce the level of TNF-α (tumor necrosis factor) in murine macrophages (RAW 264.7) after stimulation with a mixture of lipopolysaccharides (LPS). Only fdCOS and faCOS were able to significantly reduce the production of tumor necrosis factor (TNF)-α at 6 h after stimulation with lipopolysaccharides.

Activation and conformational changes of chitinase induced by ultrasound

This study investigated the effect of ultrasound on chitinase activity and conformational changes. Results revealed that ultrasound activated chitinase with a maximum enhancement of 19.17% compared with the untreated chitinase. Furthermore, an increase of V_max and a decrease of K_m after sonication were obtained, illustrating that the affinity between chitinase and substrate was intensified. No obvious effect on the tolerance to most metal ions was exhibited whether sonicated or not (p > 0.05). The conformational changes of chitinase were analyzed by circular dichroism (CD), Fourier transform infrared (FTIR), Raman and fluorescence spectroscopy. Results indicated that the activation of chitinase induced by ultrasound was presumably due to the decrease of tryptophan on the chitinase surface and the increase of β-sheet and random coil in chitinase secondary conformation. In brief, ultrasound is a possible way to activate chitinase to increase its application in food industry.

A Review of the Preparation, Analysis and Biological Functions of Chitooligosaccharide

Chitooligosaccharide (COS), which is acknowledged for possessing multiple functions, is a kind of low-molecular-weight polymer prepared by degrading chitosan via enzymatic, chemical methods, etc. COS has comprehensive applications in various fields including food, agriculture, pharmacy, clinical therapy, and environmental industries. Besides having excellent properties such as biodegradability, biocompatibility, adsorptive abilities and non-toxicity like chitin and chitosan, COS has better solubility. In addition, COS has strong biological functions including anti-inflammatory, antitumor, immunomodulatory, neuroprotective effects, etc. The present paper has summarized the preparation methods, analytical techniques and biological functions to provide an overall understanding of the application of COS.