Determination of the enantiomeric purity of epinephrine by HPLC with circular dichroism detection

Thiazole-Based Silver Ion Sensor for Sequential Colorimetric Visualization of Epinephrine in the Brain Tissues of an Alzheimer's Disease Model of Mouse

A thiazole-based probe, N'-((2-aminothiazol-5-yl)methylene)benzohydrazide (TBH), has been efficiently synthesized and characterized for the selective and sensitive detection of the neurotransmitter epinephrine (EP). The sensing strategy is based on the use of TBH for sequential colorimetric sensing of Ag+ and EP via in situ formation of Ag nanoparticles (Ag NPs) from the TBH-Ag+ complex. The generated Ag NPs lead to a bathochromic shift in absorption maximum and a change in color of the solution from light brown to reddish brown. TBH-Ag+ shows remarkable selectivity toward EP versus other drugs, common cations, anions, and some biomolecules. Moreover, TBH-Ag+ has a low detection limit for EP at 1.2 nM. The coordination of TBH-Ag+ has been proposed based on Job's plot, Fourier transform infrared spectroscopy (FT-IR), high-resolution mass spectrometry (HRMS), 1H NMR titration, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray analysis (EDAX), and density functional theory (DFT) studies. The composition and morphology of the generated Ag NPs have been analyzed by XPS, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The proposed sensing mechanism for EP has been supported by XPS of Ag after the reaction. Further, the sensitivity of TBH-Ag+ toward EP in brain tissues of an Alzheimer's disease model of mouse has been evaluated. A thorough comparison was done for evaluation of the proposed method.

Recent advances in nanopore-based analysis for carbohydrates and glycoconjugates

Saccharides are not only the basic constituents and nutrients of living organisms, but also participate in various life activities, and play important roles in cell recognition, immune regulation, development, cancer, etc. The analysis of carbohydrates and glycoconjugates is a necessary means to study their transformations and physiological roles in living organisms. Existing detection techniques can hardly meet the requirements for the analysis of carbohydrates and glycoconjugates in complex matrices as they are expensive, involve complex derivatization, and are time-consuming. Nanopore sensing technology, which is amplification-free and label-free, and is a high-throughput process, provides a new solution for the identification and sequencing of carbohydrates and glycoconjugates. This review highlights recent advances in novel nanopore-based single-molecule sensing technologies for the detection of carbohydrates and glycoconjugates and discusses the advantages and challenges of nanopore sensing technologies. Finally, current issues and future perspectives are discussed with the aim of improving the performance of nanopores in complex media diagnostic applications, as well as providing a new direction for the quantification of glycan chains and the study of glycan chain properties and functions.

Chiral acidic molecularly imprinted polymer for enantio-separation of norepinephrine racemate

We are looking into how well a copolymeric material made of poly (maleic acid-co-4-vinylpyridine) cross-linked with divinylbenzene can separate L-norepinephrine (L-NEP) from (±)-NEP. The initial step in this direction was the synthesis and subsequent analysis of L-NEP-maleimide chiral derivative. A 4-vinylpyridine/divinylbenzene combination was copolymerized with the resultant chiral maleimide. After heating the polymer materials in a high-alkaline environment to breakdown the connecting imide bonds, they were acidified in an HCl solution to eliminate the incorporated L-NEP species. Fourier transform infrared spectroscopy (FTIR) and a scanning electron microscope were used to examine the imprinted L-NEP-imprinted materials. The manufactured L-NEP-imprinted materials exhibited selectivity characteristics that were over 11 times greater for L-NEP than D-norepinephrine. The highest capacity observed in Langmuir adsorption studies was 170 mg/g at a pH of 7. After optical separation using a column technique, it was determined that the enantiomeric excess levels of D-norepinephrine and L-NEP in the first feeding and subsequent recovery solutions were 95% and 81%, respectively.

Fluorescent-Based Neurotransmitter Sensors: Present and Future Perspectives

Neurotransmitters (NTs) are endogenous low-molecular-weight chemical compounds that transmit synaptic signals in the central nervous system. These NTs play a crucial role in facilitating signal communication, motor control, and processes related to memory and learning. Abnormalities in the levels of NTs lead to chronic mental health disorders and heart diseases. Therefore, detecting imbalances in the levels of NTs is important for diagnosing early stages of diseases associated with NTs. Sensing technologies detect NTs rapidly, specifically, and selectively, overcoming the limitations of conventional diagnostic methods. In this review, we focus on the fluorescence-based biosensors that use nanomaterials such as metal clusters, carbon dots, and quantum dots. Additionally, we review biomaterial-based, including aptamer- and enzyme-based, and genetically encoded biosensors. Furthermore, we elaborate on the fluorescence mechanisms, including fluorescence resonance energy transfer, photon-induced electron transfer, intramolecular charge transfer, and excited-state intramolecular proton transfer, in the context of their applications for the detection of NTs. We also discuss the significance of NTs in human physiological functions, address the current challenges in designing fluorescence-based biosensors for the detection of NTs, and explore their future development.

Highly Enantioselective Synthesis of Pharmaceuticals at Chiral-Encoded Metal Surfaces

Enantioselective catalysis is of crucial importance in modern chemistry and pharmaceutical science. Although various concepts have been used for the development of enantioselective catalysts to obtain highly pure chiral compounds, most of them are based on homogeneous catalytic systems. Recently, we successfully developed nanostructured metal layers imprinted with chiral information, which were applied as electrocatalysts for the enantioselective synthesis of chiral model compounds. However, so far such materials have not been employed as heterogeneous catalysts for the enantioselective synthesis of real pharmaceutical products. In this contribution, we report the asymmetric synthesis of chiral pharmaceuticals (CPs) with chiral imprinted Pt-Ir surfaces as a simple hydrogenation catalyst. By fine-tuning the experimental parameters, a very high enantioselectivity (up to 95 % enantiomeric excess) with good catalyst stability can be achieved. The designed materials were also successfully used as catalytically active stationary phases for the continuous asymmetric flow synthesis of pharmaceutical compounds. This illustrates the possibility of producing real chiral pharmaceuticals at such nanostructured metal surfaces for the first time.

Identification of Single-Molecule Catecholamine Enantiomers Using a Programmable Nanopore

Enantiomers, chiral isomers with opposite chirality, typically demonstrate differences in their pharmacological activity, metabolism, and toxicity. However, direct discrimination between enantiomers is challenging due to their similar physiochemical properties. Following the strategy of programmable nanoreactors for stochastic sensing (PNRSS), introduction of phenylboronic acid (PBA) to a Mycobacterium smegmatis porin A (MspA) assists in the identification of the enantiomers of norepinephrine and epinephrine. Using a machine learning algorithm, identification of the enantiomers has been achieved with an accuracy of 98.2%. The enantiomeric excess (ee) of a mixture of enantiomeric catecholamines was measured to determine the enantiomeric purity. This sensing strategy is a faster method for the determination of ee values than liquid chromatography-mass spectrometry and is useful as a quality control in the industrial production of enantiomeric drugs.

An Evaluation of the Drone Delivery of Adrenaline Auto-Injectors for Anaphylaxis: Pharmacists’ Perceptions, Acceptance, and Concerns

Anaphylaxis is a life-threatening condition where delays in medical treatment can be fatal. Such situations would benefit from the drone delivery of an adrenaline auto-injector such as EpiPen®. This study evaluates the potential risk, reward, and impact of drone transportation on the stability of adrenaline during episodes of anaphylaxis. Further, this study examines pharmacists’ perceptions on drone delivery—pharmacists approved the use of drones to deliver EpiPen® during emergencies but had concerns with drone safety and supply chain security. Laboratory simulated onboard drone conditions reflected typical missions. In these experiments, in vitro model and pharmaceutical equivalent formulations were subjected independently to 30 min vibrations at 5, 8.43, and 13.33 Hz, and temperature storage at 4, 25, 40, and 65 °C for 0, 0.5, 3, and 24 h. The chiral composition (an indicator of chemical purity that relates to molecular structure) and concentration of these adrenaline formulations were determined using ultraviolet (UV) and circular dichroism spectroscopy (CD). Adrenaline intrinsic stability was also explored by edge-of-failure experimentation to signpost the uppermost limits for safe transportation. During drone flight with EpiPen®, the temperature and vibration g-force were 10.7 °C and 1.8 g, respectively. No adverse impact on adrenaline was observed during drone flight and laboratory-simulated conditions shown by conformation to the British Pharmacopeia standards (p > 0.05 for CD and UV). This study showed that drone delivery of EpiPen® is feasible. There are more than 15,000 community pharmacies and ≈9000 GP surgeries spanning the UK, which are likely to provide achievable ranges and distances for the direct drone delivery of EpiPen®. The authors recommend that when designing future missions, in addition to medicine stability testing that models the stresses imposed by drone flight, one must conduct a perceptions survey on the relevant group of medical professionals, because their insights, acceptance, and concerns are extremely valuable for the design and evaluation of the mission.

Screen-printed disposable electrodes using graphite-polyurethane composites modified with magnetite and chitosan-coated magnetite nanoparticles for voltammetric epinephrine sensing: a comparative study

Disposable screen-printed electrodes based on the use of graphite-polyurethane composites modified with magnetite nanoparticles (MNP-SPE) or chitosan-coated magnetite nanoparticles (CHMNP-SPE) are described. The MNP and CHMNP were synthetized and comparatively characterized by TEM, XRD, FTIR, and TGA/DTG. The MNP-SPE and CHMNP-SPE were characterized by SEM and EDX. After optimization of the MNP percentage in MNP-SPE, the materials were electrochemically characterized by cyclic voltammetry, EIS, and chronocoulometry. The electrodes were tested for their performance towards sensing of epinephrine (EP). The CHMNP-SPE is found to have better electrochemical responses in comparison to the MNP-SPE. This is assumed to be due to the chitosan coating which also protects the MNPs from oxidation under air and at different applied potential fields. The performances of the MNP-SPE and CHMNP-SPE were studied by DPV after optimization of equilibration time and DPV parameters. Response is linear in the 0.1-0.8 μM EP concentration range, at 0.03 V (vs. pseudo-Ag/AgCl), and the detection limit is 25 nM for the MNP-SPE. The linear response for the CHMNP-SPE was 0.1-0.6 μM, at 0.0 V (vs. pseudo-Ag/AgCl), and a LOD of 14 nM was achieved. The devices were used for the quantification of EP in synthetic urine and in cerebrospinal synthetic fluids. Recoveries from spiked samples are in the 95.6-102.2% range for the CHMNP-SPE and in the 98.3-109% range for MNP-SPE. The stability of the respective sensors was investigated and compared over a period of 5 months. The EP peak currents were found to decrease by only 4% for the CHMNP-SPE, while the MNP-SPE lost 23% of its EP peak current. Accordingly, the CHMNP-SPE was chosen as the most stable and sensitive sensor for EP. Graphical abstract Schematic figure of modification of a graphite-polyurethane screen-printed composite electrode with magnetite nanoparticles (MNPs) and chitosan-coated magnetite nanoparticles (CHMNPs) for the voltammetric determination of epinephrine (EP). Improved response of CHMNP-SPE (black voltammogram) in comparison to MNP-SPE (red voltammogram) was attributed to the protection of MNP from oxidation.

Fluorescence Sensing Platforms for Epinephrine Detection Based on Low Temperature Cofired Ceramics

A novel fluorescence-sensing pathway for epinephrine (EP) detection was investigated. The ceramic-based miniature biosensor was developed through the immobilization of an enzyme (laccase, tyrosinase) on a polymer—poly-(2,6-di([2,2′-bithiophen]-5-yl)-4-(5-hexylthiophen-2-yl)pyridine), based on low temperature cofired ceramics technology (LTCC). The detection procedure was based on the oxidation of the substrate, i.e., in the presence of the enzyme. An alternative enzyme-free system utilized the formation of a colorful complex between Fe²⁺ ions and epinephrine molecules. With the optimized conditions, the analytical performance illustrated high sensitivity and selectivity in a broad linear range with a detection limit of 0.14–2.10 nM. Moreover, the strategy was successfully used for an EP injection test with labeled pharmacological samples.

Chiral Purity of Crystals Using Low-Frequency Raman Spectroscopy

The pharmaceutical industry is in need of new techniques to identify the chirality of solids due to regulatory and safety concerns regarding the biological activity of enantiomers. In this study, we present for the first time the application of low-frequency Raman spectroscopy as a new and sensitive method for analyzing the chiral purity of crystals. Using this method, we were able to identify small amounts, as low as 1 % w/w, of an enantiomer in racemic crystals. To demonstrate the capabilities of the method, we used a model system based on chiral crystals of enantiopure, racemic crystals and their mixtures in various ratios. We found that the low-frequency Raman spectra of racemic and enantiopure crystals are significantly different, reflecting the different hydrogen bond networks. Moreover, a comparison of the sensitivity of enantiomeric excess in chiral crystals to that of circular dichroism and X-ray diffraction measurements showed that low-frequency Raman attains high sensitivity comparable to chiral optical methods used for solutions. Overall, our proposed approach of using Raman spectroscopy for determining enantiomeric excess in crystals is simple, fast, and offers a high degree of chiral sensitivity.

Enantiomeric impurity analysis using circular dichroism spectroscopy with United States Pharmacopeia liquid chromatographic methods

Over 300 chiral drug substances lack official United States Pharmacopeia (USP) methods for the enantiomeric purity determination. Because enantiomeric analysis typically requires specialized methods for each drug compound, developing protocols for each of these 300+ substances would be an expensive and laborious endeavor. Alternatively, if a detector capable of determining the enantiomeric composition without chiral separation could be used with certain drug compounds, this could be implemented relatively rapidly into official testing monographs. Circular dichroism (CD) detection following HPLC (HPLC-CD) has been proposed for this purpose but studies performed thus far have not prioritized its compatibility with validated regulatory methods. In this study, HPLC-CD was evaluated for enantiomeric purity determinations of 13 drug substances using HPLC methods consistent with assay protocols described in United States Pharmacopeia (USP) monographs. Of these selected substances, three (sitagliptin, timolol, and levalbuterol) showed no CD activity and one other (levofloxacin) could not be analyzed due to incompatibility of the mobile phase with the CD detector. For the remaining 9 substances, method validation was performed to determine the linearity, accuracy, precision and limits of quantitation of enantiomer impurities, which was compared to limits established by USP. It was found that enantiomeric impurities for four substances (pramipexole, levocetirizine, (S)-citalopram, and tolterodine) could be quantitatively determined at levels suitable to USP specifications. This analysis demonstrated that HPLC-CD does provide an effective enantiomeric characterization strategy for compatible chiral compounds, and can be implemented quickly and economically compared to traditional column-dependent chiral separation or derivatization methods.