Comparative Study of Some Biodegradable Polymers on the Entrapment Efficiency and Release Behavior of Etoposide from Microspheres

Fabrication and Optimization of Poly(ε-caprolactone) Microspheres Loaded with S-Nitroso-N-Acetylpenicillamine for Nitric Oxide Delivery

Heart disease is one of the leading causes of death in the United States and throughout the world. While there are different techniques for reducing or preventing the impact of heart disease, nitric oxide (NO) is administered as nitroglycerin for reversing angina or chest pain. Unfortunately, due to its gaseous and short-lived half-life, NO can be difficult to study or even administer. Therefore, controlled delivery of NO is desirable for therapeutic use. In the current study, the goal was to fabricate NO-releasing microspheres (MSs) using a donor molecule, S-Nitroso-N-Acetyl penicillamine, (SNAP), and encapsulating it in poly(ε-caprolactone) (PCL) using a single-emulsion technique that can provide sustained delivery of NO to cells over time without posing any toxicity risks. Optimization of the fabrication process was performed by varying the duration of homogenization (5, 10, and 20 min) and its effect on entrapment efficiency and size. The optimized SNAP-MS had an entrapment efficiency of ˃50%. Furthermore, we developed a modified method for NO detection by using NO microsensors to detect the NO release from SNAP-MSs in real time, showing sustained release behavior. The fabricated SNAP-MSs were tested for biocompatibility with HUVECs (human umbilical vein endothelial cells), which were found to be biocompatible. Lastly, we tested the effect of controlled NO delivery to human induced pluripotent stem-derived cardiomyocytes (hiPSC-CMs) via SNAP-MSs, which showed a significant improvement in the electrophysiological parameters and alleviated anoxic stress.

Precise surface functionalization of PLGA particles for human T cell modulation

The biofunctionalization of synthetic materials has extensive utility for biomedical applications, but approaches to bioconjugation typically show insufficient efficiency and controllability. We recently developed an approach by building synthetic DNA scaffolds on biomaterial surfaces that enables the precise control of cargo density and ratio, thus improving the assembly and organization of functional cargos. We used this approach to show that the modulation and phenotypic adaptation of immune cells can be regulated using our precisely functionalized biomaterials. Here, we describe the three key procedures, including the fabrication of polymeric particles engrafted with short DNA scaffolds, the attachment of functional cargos with complementary DNA strands, and the surface assembly control and quantification. We also explain the critical checkpoints needed to ensure the overall quality and expected characteristics of the biological product. We provide additional experimental design considerations for modifying the approach by varying the material composition, size or cargo types. As an example, we cover the use of the protocol for human primary T cell activation and for the identification of parameters that affect ex vivo T cell manufacturing. The protocol requires users with diverse expertise ranging from synthetic materials to bioconjugation chemistry to immunology. The fabrication procedures and validation assays to design high-fidelity DNA-scaffolded biomaterials typically require 8 d.

Opioid Addiction: Social Problems Associated and Implications of Both Current and Possible Future Treatments, including Polymeric Therapeutics for Giving Up the Habit of Opioid Consumption

BACKGROUND

Detoxification programmes seek to implement the most secure and compassionate ways of withdrawing from opiates so that the inevitable withdrawal symptoms and other complications are minimized. Once detoxification has been achieved, the next stage is to enable the patient to overcome his or her drug addiction by ensuring consumption is permanently and completely abandoned, only after which can the subject be regarded as fully recovered.

METHODS

A systematic search on the common databases of relevant papers published until 2016 inclusive.

RESULTS AND CONCLUSION

Our study of the available oral treatments for opioid dependence has revealed that no current treatment can actually claim to be fully effective. These treatments require daily oral administration and, consequently, regular visits to dispensaries, which in most cases results in a lack of patient compliance, which causes fluctuations in drug plasma levels. We then reviewed alternative treatments in the available scientific literature on polymeric sustained release formulations. Research has been done not only on release systems for detoxification but also on release systems for giving up the habit of taking opioids. These efforts have obtained the recent authorization of polymeric systems for use in patients that could help them to reduce their craving for drugs.

Development of a controlled release of salicylic acid loaded stearic acid-oleic acid nanoparticles in cream for topical delivery

Lipid nanoparticles are colloidal carrier systems that have extensively been investigated for controlled drug delivery, cosmetic and pharmaceutical applications. In this work, a cost effective stearic acid-oleic acid nanoparticles (SONs) with high loading of salicylic acid, was prepared by melt emulsification method combined with ultrasonication technique. The physicochemical properties, thermal analysis and encapsulation efficiency of SONs were studied. TEM micrographs revealed that incorporation of oleic acid induces the formation of elongated spherical particles. This observation is in agreement with particle size analysis which also showed that the mean particle size of SONs varied with the amount of OA in the mixture but with no effect on their zeta potential values. Differential scanning calorimetry analysis showed that the SONs prepared in this method have lower crystallinity as compared to pure stearic acid. Different amount of oleic acid incorporated gave different degree of perturbation to the crystalline matrix of SONs and hence resulted in lower degrees of crystallinity, thereby improving their encapsulation efficiencies. The optimized SON was further incorporated in cream and its in vitro release study showed a gradual release for 24 hours, denoting the incorporation of salicylic acid in solid matrix of SON and prolonging the in vitro release.

Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review

Biodegradable polymer based novel drug delivery systems have provided many avenues to improve therapeutic efficacy and pharmacokinetic parameters of medicinal entities. Among synthetic biodegradable polymer, poly-є-caprolactone (PCL) is a polymer with very low glass transition temperature and melting point. Owing to its amicable nature and tailorable properties it has been trialed in almost all novel drug delivery systems and tissue engineering application in use/investigated so far. This review aims to provide an up to date of drugs incorporated in different PCL based formulations, their purpose and brief outcomes. Demonstrated PCL formulations with or without drugs, intended for drug delivery and/or tissue engineering application such as microsphere, nanoparticles, scaffolds, films, fibers, micelles etc. are categorized based on method of preparation.

Cephalexin microspheres for dairy mastitis: effect of preparation method and surfactant type on physicochemical properties of the microspheres

The aim of this study was to evaluate the effects of preparation method and the type of surfactant on the properties of cephalexin (CPX) microspheres in order to obtain delivery systems suitable for the treatment of dairy mastitis. Microspheres were obtained using various preparation conditions and their physicochemical characteristics such as size, loading efficiency, morphology, and drug crystallinity were investigated. Antibacterial activity of microspheres from the optimum preparation condition was also studied. CPX microspheres were prepared by two different W/O/W emulsion solvent evaporation methods using PLGA as a matrix forming polymer. Several types of surfactants including nonionic, cationic, and anionic at different concentrations were used for preparation of the particles. The type and concentration of surfactant did neither affect the size nor morphology of the microspheres but showed a pronounced effect on the CPX encapsulation efficiency. It was found that Tween 80 showed the highest drug encapsulation efficiency (66.5%). Results from X-ray diffraction diffractograms and differential scanning calorimetry thermograms indicated that CPX entrapped in these microparticles was amorphous. Assessment of antibacterial activity showed that the obtained CPX microspheres exhibited good inhibition with minimum inhibitory concentration and minimum bactericidal concentration values of 128 microg/mL and 2,048 mg/mL against Staphylococcus aureus ATCC 25923, 512 microg/mL and 4,096 mg/mL against Escherichia coli ATCC 25922, respectively.

Enhanced efficacy of local etoposide delivery by poly(ether-anhydride) particles against small cell lung cancer in vivo

Drug carrier particles composed of poly(ethylene glycol)-co-poly(sebacic acid) (PEG-PSA) have been shown capable of efficient aerosolization into model lungs and the ability to rapidly penetrate human mucus. Here, we develop PEG-PSA particles (Etop/PEG-PSA) that encapsulate up to 40% etoposide by weight in a one step process, release it continuously for 6 days in vitro, and maintain its cytotoxic activity against a human lung tumor cell line in vitro. We further show that Etop/PEG-PSA injected intratumorally effectively suppress human lung tumor growth in a xenograft mouse model, with 100% survival after 31 days. In contrast, 0% survival was observed by day 24 in animals that received free etoposide (either intratumoral or intraperitoneal administration) or placebo particles intratumorally. These findings support PEG-PSA as a drug delivery platform for improved local therapy of cancer.

Investigations of the effect of the lipid matrix on drug entrapment, in vitro release, and physical stability of olanzapine-loaded solid lipid nanoparticles

The purpose of this research was to study the effect of the lipid matrix on the entrapment of olanzapine (OL). OL-loaded solid lipid nanoparticles (SLNs) were prepared using lipids like glyceryl monostearate (GMS), Precirol ATO 5 (PRE), glyceryl tristearate (GTS), and Witepsol E85 (WE 85)--and poloxamer 407 and hydrogenated soya phosphatidylcholine as stabilizers--using a hot melt emulsification high-pressure homogenization technique, and then characterized by particle size analysis, zeta potential, differential scanning calorimetry (DSC), and powder X-ray diffraction (pXRD). Homogenization at 10,000 psi for 3 cycles resulted in the formation of SLNs with a mean particle size of approximately 190 nm for the 4 lipids investigated. The highest partition coefficient for OL between the melted lipid and pH 7.4 phosphate buffer (pH 7.4 PB) was obtained with GTS. The entrapment efficiency was in the following order: GTS SLNs > PRE SLNs > WE 85 SLNs > GMS SLNs. DSC and pXRD showed that much of the incorporated fraction of OL existed in the amorphous state after incorporation into SLNs. A sharp increase in the flocculation of the SLN dispersions was observed upon addition of 0.6 M aqueous sodium sulfate solution. Nanoparticle surface hydrophobicity was in the following order: GTS SLNs > PRE SLNs > WE 85 SLNs > GMS SLNs. A significant increase in size and zeta potential was observed for GTS SLN and WE 85 SLN dispersions stored at 40 degrees C. Release of OL from the SLNs was sustained up to 48 hours in pH 7.4 PB and obeyed Higuchi's release kinetics.