Photocatalytic degradation of P-Cresol using TiO2/ZnO hybrid surface capped with polyaniline

A review of pathogen removal from municipal wastewater using advanced oxidation processes: Agricultural application, regrowth risks, and new perspectives

Pathogen removal in wastewater offers a chance to recover water and nutrients for crop production, reducing environmental contamination and public health risks. However, the risk of pathogens regrowing in treated effluents can endanger public health if reused in agriculture, attracting stringent reuse standards. While advanced oxidation processes (AOPs) promise to reduce pathogens, eliminating regrowth potential in AOP-treated effluents requires further scrutiny. This review aimed to summarize the available evidence on understanding pathogen reduction and regrowth potential in AOP-treated effluents, following best practices for scoping reviews like the preferred reporting items for systematic reviews and meta-analysis (PRISMA). It covers recent pathogen studies under AOPs, current AOP investigations, the impact of AOP dosage and retention time on pathogen control, and challenges in reusing AOP-treated effluents for crop production. Additionally, it identifies areas needing improvement or complementary treatments for pathogen-free effluents with no regrowth potential. The review concludes by summarizing key findings and suggesting research areas for further exploration.

Modeling adsorption and photocatalytic treatment of recalcitrant contaminant on multi-walled carbon/TiO2 nanocomposite

A nanocomposite photocatalyst consisting of titanium dioxide (TiO2) supported on multiwalled carbon nanotubes (MWCNTs) has been successfully prepared and used for the treatment of wastewater contaminated with tetracycline (TC), a recalcitrant antibiotic pollutant. The TiO2/MCNT composites were prepared by a simple evaporation-drying method. The properties of MWCNT/TiO2 were optimized by dispersing different amounts of TiO2 onto MWCNT. The structural and optical characteristics of the nano-engineered photocatalyst composite were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) techniques. Photocatalytic degradation of TC was conducted in a quartz glass reactor. Different kinetic models were used to demonstrate the governing mechanisms. The findings revealed that the TiO2/MWCNT composite had enhanced photocatalytic activity (95% TC removal) compared to TiO2 (86% removal). The photocatalyst nanocomposite exhibited overall pseudo-second-order reaction kinetics and favored the Langmuir adsorption isotherm. Although up to 95% degradation of TC was achieved, only 75% of it was mineralized as a result of the formation of stable refractory intermediates.

Highly customized porous TiO2-PANI nanoparticles with excellent photocatalytic efficiency for dye degradation

The present work encompasses a simple strategy to synthesize highly porous TiO₂ by incorporating PANI polymer into the sol-gel chemistry of Titanium dioxide/Titanium (IV)-iso-propoxide (TiO₂/TTIP). A series of TiO₂ samples by varying wt.% of PANI, have been synthesized. A probable growth mechanism has been presented for the formation of a porous ginger-like nanostructure of TiO₂-PANI (TP). HRTEM images reveal that the particle size range is 6-16 nm for pristine TiO₂ and 5-13 nm for TP samples. XPS analysis confirms the presence of the hydrogen bonds in-between surface hydroxyl groups (Ti-OH) of TiO₂ and the protonated nitrogen of PANI. UV-visible absorption study reveals a small shift towards longer wavelength for TP8 sample than that of pristine TiO₂ (λ_max = 314 nm) as well as reduction in E_g value from 3.02 eV to 2.89 eV. FTIR results confirm the successful interaction of PANI and TiO₂. BJH and BET analysis confirms an increase of porosity in TP8 sample with an average pore volume of 0.36 cm³ g^-1. High photocatalytic activity (98.77%) towards Methylene blue dye degradation is observed for TP8 sample having 8 wt% of PANI and it is explained through the combined effect of structural porosity of TiO₂ and synergic effect of PANI. The K_appa value at pH 11 (0.01372 min^-1) is found to be 7.84-folds higher than that of the photocatalytic reaction at pH 3 (K_appa = 0.00175 min^-1). While pristine TiO₂ exhibits the minimum removal efficiency (89.57%) with K_appa of 0.00756 min^-1. K_appa value of catalysis reaction for TP8 is found to be almost 2-fold higher than pristine TiO₂. Quantum Yield value for TP8 is found to be 3.59 × 10^-4 molecules photon^-1. This high Quantum Yield value of present photocatalytic system explicates the low energy consumption for the treatment of textile dye pollutant. Additionally, STY value (1.79 × 10^-5 molecules photon^-1 mg^-1) confirms the outstanding mineralization strength of TP8 by a unit mass for high amounts of MB dye per unit time. Thus, the present study offers an excellent photocatalyst i.e., TP8 having 8 wt% of PANI for the degradation of MB dye.

Integrated process approach for degradation of p-cresol pollutant under photocatalytic reactor using activated carbon/TiO2 nanocomposite: application in wastewater treatment

Over the years, biodegradation has been an effective technique for waste water treatment; however, it has its own limitations. In order to achieve a higher degradation efficacy, integrated processes are being focus in this area. Therefore, the present study is targeted towards the coupling of biodegradation and photocatalytic degradation of p-cresol. The biodegradation of p-cresol was performed via lab isolate Serratia marcescens ABHI001. The obtained results confirmed that ~85% degradation of p-cresol was accomplished using Serratia marcescens ABHI001 strain in 18 h. Consequently, degradation of remaining residue (remaining p-cresol concentration initially used) was also examined in a batch reactor using activated carbon-TiO₂ nanocomposite (AC/TiO₂-NC) as a catalyst under the exposure of UV radiation. The AC/TiO₂-NC was processed via sol-gel technique and characterized by various techniques, namely Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transformed infrared spectroscopy (FT-IR). The investigation allowed p-cresol degradation further augment up to ~96% with the help of spectrophotometer trailed by high performance liquid chromatography (HPLC). This study demonstrates that integrated process (biodegradation-photodegradation) is the cost-effective bioremediation process to overcome such kinds of pollutant issues.

Synthesis and applications of TiO2/ZnO hybrid nanostructures by ZnO deposition on TiO2 nanotubes using electrochemical processes

In recent years, TiO2/ZnO hybrid nanostructures have been attracting the interest of the scientific community due to their excellent photoelectrochemical properties. The main advantage of TiO2/ZnO hybrid nanostructures over other photocatalysts based on semiconductor materials lies in their ability to form heterojunctions in which the valence and conduction bands of both semiconductors are intercalated. This factor produces a decrease in the band gap and the recombination rate and an increase in the light absorption range. The aim of this review is to perform a revision of the main methods to synthesise TiO2/ZnO hybrid nanostructures by ZnO deposition on TiO2 nanotubes using electrochemical processes. Electrochemical synthesis methods provide an easy, fast, and highly efficient route to carry out the synthesis of nanostructures such as nanowires, nanorods, nanotubes, etc. They allow us to control the stoichiometry, thickness and structure mainly by controlling the voltage, time, temperature, composition of the electrolyte, and concentration of monomers. In addition, a study of the most promising applications for TiO2/ZnO hybrid nanostructures has been carried out. In this review, the applications of dye-sensitised solar cell, photoelectrocatalytic degradation of organic compounds, photoelectrochemical water splitting, gas sensors, and lithium-ion batteries have been highlighted.

An Overview of Polymer-Supported Catalysts for Wastewater Treatment through Light-Driven Processes

In recent years, alarm has been raised due to the presence of chemical contaminants of emerging concern (CECs) in water. This concern is due to the risks associated with their exposure, even in small amounts. These complex compounds cannot be removed or degraded by existing technologies in wastewater treatment plants. Therefore, advanced oxidation processes have been studied, with the objective of developing a technology capable of complementing the conventional water treatment plants. Heterogenous photocatalysis stands out for being a cost-effective and environmentally friendly process. However, its most common form (with suspended catalytic particles) requires time-consuming and costly downstream processes. Therefore, the heterogeneous photocatalysis process with a supported catalyst is preferable. Among the available supports, polymeric ones stand out due to their favorable characteristics, such as their transparency, flexibility and stability. This is a relatively novel process; therefore, there are still some gaps in the scientific knowledge. Thus, this review article aims to gather the existing information about this process and verify which questions are still to be answered.

Enhanced visible-light driven multi-photoredox Cr(VI) and p-cresol by Si and Zr interplay in fibrous silica-zirconia

Multiple contaminants including heavy metals and phenolic compounds are normally co-exist in wastewater, which caused the treatment process is rather complicated. Herein, the synergistic photoredox of Cr(VI) and p-cresol (pC) by innovative fibrous silica zirconia (FSZr) photocatalyst was reported. The high surface area of FSZr comprised of microspheres with a bicontinuous concentric lamella structure morphology consisted of silica, while its core consisted of ZrO₂ structure. The rearrangement of FSZr framework increased the crystallinity, formed Si-O-Zr bonds and narrowed the band gap of ZrO₂ for enhanced of photoredox of Cr(VI) and pC. Compared to the reaction, the photoredox efficiency of FSZr for removing Cr(VI) and pC in simultaneous system was found to be 96 % and 59 %, respectively which are higher than that in its single system owing to the efficient electron-hole charge separation. Phenolic compound with high degree of electron donating group gave beneficial effect to photoreduction of Cr(VI). Consequently, a proposed mechanism involving multi-photoredox pathway were proposed based on photoredox reaction and scavengers studies. FSZr sustained the simultaneous photoredox activities after five runs demonstrating its possibility to be use in the wastewater treatment of various pollutants.

Polyaniline-Coated TiO2 Nanorods for Photocatalytic Degradation of Bisphenol A in Water

Polyaniline (PANI)-wrapped TiO₂ nanorods (PANI/TiO₂), obtained through the oxidative polymerization of aniline at the surface of hydrothermally presynthesized TiO₂ nanorods, were evaluated as photocatalysts for the degradation of Bisphenol A (BPA). Fourier-transform infrared spectroscopy analysis revealed the successful incorporation of PANI into TiO₂ by the appearance of peaks at 1577 and 1502 cm^-1 that are due to the C=C and C-N stretch of the benzenoid or quinoid ring in PANI. Brunauer-Emmett-Teller analysis revealed that PANI/TiO₂ had almost double the surface area of TiO₂ (44.8999 m²/g vs 28.2179 m²/g). Transmission electron microscopy (TEM) analysis showed that TiO₂ nanorods with different diameters were synthesized. The TEM analysis showed that a thin layer of PANI wrapped the TiO₂ nanorods. X-ray photon spectroscopy survey scan of the PANI/TiO₂ nanocomposite revealed the presence of C, O, Ti, and N. Photocatalytic activity evaluation under UV radiation through the effect of key parameters, including pH, contact time, dosage, and initial concentration of BPA, was carried out in batch studies. Within 80 min, 99.7% of 5 ppm BPA was attained using the 0.2 g/L PANI/TiO₂ photocatalyst at pH 10. The quantum yield (QY) of these photocatalysts was evaluated to be 9.86 × 10^-5 molecules/photon and 2.82 × 10^-5 molecules/photon for PANI/TiO₂ and TiO₂, respectively. PANI/TiO₂ showed better performance than as-synthesized TiO₂ with a rate constant of 4.46 × 10^-2 min^-1 compared to 2.18 × 10^-2 min^-1. The rate of degradation of PANI/TiO₂ was also superior to that of TiO₂ (150 mmol/g/h vs 74.89 mmol/g/h). Nitrate ions increased the rate of degradation of BPA, while humic acid consistently inhibited the degradation of BPA. LC-MS analysis identified degradation products with m/z 213.1, 135.1, and 93.1. The PANI/TiO₂ nanocomposite was reused up to five cycles with a removal of at least 80% in the fifth cycle. LC-MS results revealed three possible BPA degradation intermediates. LC-MS analysis identified degradation products which included protonated BPA, [C₁₄H₁₃O₂ ⁺], and [C₉H₁₁O⁺]. The PANI/TiO₂ nanocomposite demonstrated superior photocatalytic activity with respect to improved QY and figure of merit and lower energy consumption.

Performance of Bi2O3/TiO2 prepared by sol-gel on p-Cresol degradation under solar and visible light

Photocatalytic degradation of p-Cresol was evaluated using the mixed oxide Bi₂O₃/TiO₂ (containing 2 and 20% wt. Bi₂O₃ referred as TB2 and TB20) and was compared with bare TiO₂ under simulated solar radiation. Materials were prepared by the classic sol-gel method. All solids exhibited the anatase phase by X-ray diffraction (XRD) and Raman spectroscopy. The synthesized materials presented lower crystallite size and Eg value, and also higher surface area as Bi₂O₃ amount was increased. Bi content was quantified showing near to 70% of theoretical values in TB2 and TB20. Bi₂O₃ incorporation also was demonstrated by X-ray photoelectron spectroscopy (XPS). Characterization of mixed oxides suggests a homogeneous distribution of Bi₂O₃ on TiO₂ surface. Photocatalytic tests were carried out using a catalyst loading of 1 g L^-1 under simulated solar light and visible light. The incorporation of Bi₂O₃ in TiO₂ improved the photocatalytic properties of the synthesized materials obtaining better results with TB20 than the unmodified TiO₂ under both radiation sources.