Separation of brown carbon from black carbon for IMPROVE and Chemical Speciation Network PM2.5 samples

Light absorption enhancement of black carbon and its impact factors during winter in a megacity of the Sichuan Basin, China

Carbonaceous aerosols play a vital role in global climate patterns due to their potent light absorption capabilities. However, the light absorption enhancement effect (Eabs) of black carbon (BC) is still subject to great uncertainties due to factors such as the mixing state, coating material, and particle size distribution. In this study, fine particulate matter (PM2.5) samples were collected in Chengdu, a megacity in the Sichuan Basin, during the winter of 2020 and 2021. The chemical components of PM2.5 and the light absorption properties of BC were investigated. The results revealed that secondary inorganic aerosols and carbonaceous aerosols were the dominant components in PM2.5. Additionally, the aerosol filter filtration-dissolution (AFD) treatment could improve the accuracy of measuring elemental carbon (EC) through thermal/optical analysis. During winter in Chengdu, the absorption enhancement values of BC ranged between 1.56 and 2.27, depending on the absorption wavelength and the mixing state of BC and non-BC materials. The presence of internally mixed BC and non-BC materials significantly contributed to Eabs, accounting for an average of 68 % at 405 nm and 100 % at 635 nm. The thickness of the BC coating influenced Eabs, displaying an increasing-then-decreasing trend. This trend was primarily attributed to the hygroscopic growth and dehydration shrinkage of particulate matter. Nitrate, as the major component of BC coating, played a crucial role in the lensing effect and exhibited fast growth during variation in Eabs. By combining the results from PMF, we identified the secondary formation and vehicle emission as the primary contributors to Eabs. Consequently, this study can provide valuable insights into the optical parameters, which are essential for assessing the environmental quality, improving regional atmospheric conditions, and formulating effective air pollution control strategies.

Characterization and apportionment of carbonaceous aerosol emission factors from light-duty and heavy-duty vehicle fleets in Maharashtra, India

This study aims to investigate the characteristics of carbonaceous aerosols and estimate emission factor (EF) based on roadway tunnel measurements, from two distinct vehicular fleets: an all light-duty vehicle (LDV) fleet, and a mixed fleet of 80% LDV and 20% heavy-duty vehicle (HDV). Carbonaceous content (organic carbon: OC and elemental carbon: EC) in total fine particles (PM2.5) accounted for 41% ± 6.8% in LDV fleet and 48% ± 7.2% in mixed fleet. While higher volatile OC dominated in the LDV fleet emissions, in mixed fleet, lower volatile OC and EC emissions dominated due to the presence of higher HDV and super-emitter (SE) fractions which led to significantly higher optically active absorbing aerosols. Reconstructed HDV fleet EF was higher than LDV fleet by 36 times (PM2.5), 19 times (OC) and 51 times (EC). Our findings emphasize the significance of implementing vehicle inspection and maintenance programs, coupled with decarbonization of HDVs to mitigate on-road vehicular emissions in India.

Highly Time-Resolved Apportionment of Carbonaceous Aerosols from Wildfire Using the TC-BC Method: Camp Fire 2018 Case Study

The Camp Fire was one of California's deadliest and most destructive wildfires, and its widespread smoke threatened human health over a large area in Northern California in November 2018. To analyze the Camp Fire influence on air quality on a 200 km distant site in Berkeley, highly time-resolved total carbon (TC), black carbon (BC), and organic carbon (OC) were measured using the Carbonaceous Aerosol Speciation System (CASS, Aerosol Magee Scientific), comprising two instruments, a Total Carbon Analyzer TCA08 in tandem with an Aethalometer AE33. During the period when the air quality was affected by wildfire smoke, the BC concentrations increased four times above the typical air pollution level presented in Berkeley before and after the event, and the OC increased approximately ten times. High-time-resolution measurements allow us to study the aging of OC and investigate how the characteristics of carbonaceous aerosols evolve over the course of the fire event. A higher fraction of secondary carbonaceous aerosols was observed in the later phase of the fire. At the same time, the amount of light-absorbing organic aerosol (brown carbon) declined with time.

Two-year-long high-time-resolution apportionment of primary and secondary carbonaceous aerosols in the Los Angeles Basin using an advanced total carbon-black carbon (TC-BC(λ)) method

In recent years, carbonaceous aerosols (CA) have been recognized as a significant contributor to the concentration of particles smaller than 2.5 μm (i.e., PM_2.5), with a negative impact on public health and Earth's radiative balance. In this study, we present a method for CA apportionment based on high-time-resolution measurements of total carbon (TC), black carbon (BC), and spectral dependence of absorption coefficient using a recently developed Carbonaceous Aerosol Speciation System (CASS). Two-year-long CA measurements at two different locations within California's Los Angeles Basin are presented. CA was apportioned based on its optical absorption properties, organic or elemental carbon composition, and primary or secondary origin. We found that the secondary organic aerosols (SOA), on average, represent >50 % of CA in the study area, presumably resulting from the oxidation of anthropogenic and biogenic volatile organic components. Remarkable peaks of SOA in summer afternoons were observed, with a fractional contribution of up to 90 %. On the other hand, the peak of primary emitted CA, consisting of BC and primary organic aerosol (POA), contributed >80 % to the CA during morning rush hours on winter working days. The light absorption of BC dominated over the brown carbon (BrC), which contributed to 20 % and 10 % of optical absorption at the lower wavelength of 370 nm during winter nights and summer afternoons, respectively. The highest contribution of BrC, up to 50 %, was observed during the wildfire periods. Although the uncertainty levels can be high for some CA components (such as split between primary emitted and secondary formed BrC during winter nights), further research focused on the optical properties of CA at different locations may help to better constrain the parameters used in CA apportionment studies. We believe that the CASS system combined with the apportionment method presented in this study can offer simplified and cost-effective insights into the composition of carbonaceous aerosols.

Vehicle exhausts contribute high near-UV absorption through carbonaceous aerosol during winter in a fast-growing city of Sichuan Basin, China

Carbonaceous aerosols pose significant climatic impact, however, their sources and respective contribution to light absorption vary and remain poorly understood. In this work, filter-based PM_2.5 samples were collected in winter of 2021 at three urban sites in Yibin, a fast-growing city in the south of Sichuan Basin, China. The composition characteristics of PM_2.5, light absorption and source of carbonaceous aerosol were analyzed. The city-wide average concentration of PM_2.5 was 87.4 ± 31.0 μg/m³ in winter. Carbonaceous aerosol was the most abundant species, accounting for 42.5% of the total PM_2.5. Source apportionment results showed that vehicular emission was the main source of PM_2.5 during winter, contributing 34.6% to PM_2.5. The light absorption of black carbon (BC) and brown carbon (BrC) were derived from a simplified two-component model. We apportioned the light absorption of carbonaceous aerosols to BC and BrC using the Least Squares Linear Regression with optimal angstrom absorption exponent of BC (AAE_BC). The average absorption of BC and BrC at 405 nm were 51.6 ± 21.5 Mm^-1 and 17.7 ± 8.0 Mm^-1, respectively, with mean AAE_BC = 0.82 ± 0.02. The contribution of BrC to the absorption of carbonaceous reached 26.1% at 405 nm. Based on the PM_2.5 source apportionment and the mass absorption cross-section (MAC) value of BrC at 405 nm, vehicle emission was found to be the dominant source of BrC in winter, contributing up to 56.4%. Therefore, vehicle emissions mitigation should be the primary and an effective way to improve atmospheric visibility in this fast-developing city.

Evolution of light absorption properties during photochemical aging of straw open burning aerosols

Straw burning comprises more than 30% of all types of burned biomass in Asia, while the estimation of the emitted aerosols' direct radiative forcing effect suffers from large uncertainties, especially when atmospheric aging processes are considered. In this study, the light absorption properties of primary and aged straw burning aerosols in open fire were characterized at 7 wavelengths ranging from 370 nm to 950 nm in a chamber. The primary rice, corn and wheat straw burning bulk aerosols together had a mass absorption efficiency (MAE) of 2.43 ± 1.36 m² g^-1 at 520 nm and an absorption Ångström exponent (AAE) of 1.93 ± 0.71, while the primary sorghum straw burning bulk aerosols were characterized by a relatively lower MAE of 0.95 ± 0.54 m² g^-1 and a higher AAE of 4.80 ± 0.68. Both the MAE and AAE of primary aerosols can be well parameterized by the (PM-BC)/BC ratio (in wt.). The MAE of black carbon (BC) increased by 11-190% during photoreactions equivalent to 16-60 h of atmospheric aging, which was positively correlated with the (PM-BC)/(BC) ratio. The MAE of organic aerosols first slightly increased or leveled off, and then decreased. Specifically, at 370 nm, the first growth/plateau stage lasted until OH exposure reached 0.47-1.29 × 10¹¹ molecule cm^-3 s, and the following period exhibited decay rates of 1.0-2.8 × 10^-12 cm³ molecule^-1 s^-1 against the OH radical, corresponding to half-lives of 46-134 h in a typical ambient condition. During photoreactions, competition among the lensing effect, growth/bleach of organic chromophores, and particle mass and size growth complicated the evolution of the direct radiative forcing effect. It is concluded that rice and corn straw burning aerosols maintained a warming effect after aging, while the cooling effect of fresh sorghum straw burning aerosols increased with aging.

Wintertime haze and ozone at Dinosaur National Monument

Dinosaur National Monument (DINO) is located near the northeastern edge of the Uinta Basin and often experiences elevated levels of wintertime ground-level ozone. Previous studies have shown that high ozone mixing ratios in the Uinta Basin are driven by elevated levels of volatile organic compounds (VOCs) and nitrogen oxides (NO_x) from regional oil and gas development coupled with temperature inversions and enhanced photochemistry from persistent snow cover. Here, we show that persistent snow cover and temperature inversions, along with abundant ammonia, also lead to wintertime haze in this region. A study was conducted at DINO from November 2018 through May 2020 where ozone, speciated fine and coarse aerosols, inorganic gases, and VOCs were measured. Three National Ambient Air Quality Standards (NAAQS) ozone exceedances were observed in the first winter, and no exceedances were observed in the second winter. In contrast, elevated levels of particulate matter were observed both winters, with 24-h averaged particle light extinction exceeding 100 Mm^-1. These haze events were dominated by ammonium nitrate, and particulate organics were highly correlated with ammonium nitrate. Ammonium nitrate formation was limited by nitric acid in winter. As such, reductions in regional NO_x emissions should reduce haze levels and improve visibility at DINO in winter. Long-term measurements of particulate matter from nearby Vernal, Utah, suggest that visibility impairment is a persistent issue in the Uinta Basin in winter. From April through October 2019, relatively clean conditions occurred, with average particle extinction of ~10 Mm^-1. During this period, ammonium nitrate concentrations were lower by more than an order of magnitude, and contributions from coarse mass and soil to haze levels increased. VOC markers indicated that the high levels of observed pollutants in winter were likely from local sources related to oil and gas extraction activities.Implications: Elevated ground-level ozone and haze levels were observed at Dinosaur National Monument in winter. Haze episodes were dominated by ammonium nitrate, with 24-h averaged particle light extinction exceeding 100 Mm^-1, reducing visual range near the surface to ~35 km. Despite elevated ammonium nitrate concentrations, additional gas-phase ammonia was available, such that any increase in NO_x emissions in the region is likely to lead to even greater haze levels.

Ambient sampling of real-world residential wood combustion plumes

Wood smoke contains large quantities of carbonaceous aerosols known to increase climate forcing and be detrimental to human health. This paper reports the findings from our ambient sampling of fresh residential wood combustion (RWC) plumes in two heating seasons (2015-2016, 2016-2017) in Upstate New York. An Aethalometer (AE33) and a pDR-1500 were employed to monitor residential wood smoke plumes in Ithaca, NY through a hybrid mobile-stationary method. Fresh wood smoke plumes were captured and characterized at 13 different RWC sources in the city, all without significant influence from other combustion sources or atmospheric aging. Wood smoke absorption Ångström exponent (AAE) was estimated using both a one-component model, AAE_WB, and a two-component model, AAE_BrC (assuming AAE_BC = 1.0). Consistent with the recent laboratory studies, our results show that AAEs were highly variable for residential wood smoke for the same source and across different sources, with AAE_WB values ranging from 1.3 to 5.0 and AAE_BrC values ranging from 2.2 to 7.4. This finding challenges the use of using a single AAE wood smoke value within the range of 1 to 2.5 for source apportionment studies. Furthermore, the PM_2.5/BC ratio measured using optical instruments was demonstrated to be potentially useful to characterize burning conditions. Different wood smoke sources can be distinguished by their PM_2.5/BC ratio, which range between 15 and 150. This shows promise as an in-situ, cost-effective, ambient sampling-based method to characterize wood burning conditions.Implications: There are two main implications from this paper. First, the large variability in wood smoke absorption Ångström exponent (AAE) values revealed from our real-world, ambient sampling of residential wood combustion plumes indicated that it is not appropriate to use a single AAE wood smoke value for source apportionment studies. Second, the PM2.5/BC ratio has been shown to serve as a promising in-situ, cost-effective, ambient sampling-based indicator to characterize wood burning conditions. This has the potential to greatly reduce the costs of insitu wood smoke surveillance.

Atmospheric levels, distribution, sources, correlation with meteorological parameters and other pollutants and health risk of PAHs bound in PM2.5 and PM10 in Burgas, Bulgaria - a case study

The quality of atmospheric air of Burgas city, Bulgaria was analyzed in relation to PAHs in two particulate matter fractions - 2.5 μm and 10 μm. It was found that PAHs registered in PM₁₀ represent entirely the ones registered in PM_2.5 - an indication that the particulate PAHs in ambient air of Burgas for the sampling period are associated with the fine PM fraction. The PAH compounds with highest concentrations are mainly associated with coal combustion, diesel and gasoline vehicle and biomass burning, which is further confirmed by the calculated diagnostic ratios. The combustion-derived PAHs represent on average 86.6 ± 2.8% of total PAHs concentration. The linear regression analysis showed strong and statistically meaningful correlations between PM fractions and PAHs indicating the influence of similar local events and emission sources of pollution. PM_2.5 or PM₁₀ relationships with PAHs were significant but lower correlation coefficients were observed for low-molecular weight (LMW) PAHs in comparison to middle-molecular weight (MMW) and higher-molecular weight (HMW) PAHs, due to their lower presence in particulates and higher partition in gaseous atmospheric phase. Further significant correlations were found with wind speed, solar radiation and atmospheric pressure as well as NO₂ and O₃ ambient concentration. The calculated excess cancer risks are twice as much as acceptable limit.

Significant light absorption of brown carbon during the 2020 California wildfires

In this study, the contribution of brown carbon (BrC) to the absorption aerosol optical depth (AAOD) during the August to October 2020 California wildfires in Fresno, Monterey, and the University of California Santa Barbara (UCSB) was investigated using Aerosol Robotic Network (AERONET) column measurements with Moderate Resolution Imaging Spectroradiometer (MODIS) fire pixel counts. There was an approximate three to five times increase in AAOD and fine-mode aerosols during intensive wildfires in August-October 2020 compared to the wildfires in the previous 18 years (2002-2019). Substantial daily variation in the contribution of BrC to AAOD was correlated with the fire pixel counts (correlation coefficients of 0.63, 0.40, and 0.57 at Fresno, Monterey, and UCSB, respectively). This variation was influenced by regional topography, atmospheric conditions, and distance from the fire. Between August and October 2020, the average contribution of BrC to AAOD at 440 nm due to wildfires was 35.3 ± 5.6, 35.1 ± 6.8, and 40.6 ± 9.5% at Fresno, Monterey, and UCSB, respectively. This was approximately twice as high as for those sites without a direct wildfire influence. The BrC contribution with direct wildfire influence over the period of January-December 2020 at Fresno, Monterey, and UCSB (32.8 ± 7.5, 31.6 ± 7.9, and 40.0 ± 3.5%, respectively) and from 2002 to 2019 (30.7 ± 8.3, 28.5 ± 4.8, and 35.7 ± 14.6%, respectively) was approximately 20% greater than other BrC sources including vehicles, fossil fuel combustion, and residential heating.

Emerging Major Role of Organic Aerosols in Explaining the Occurrence, Frequency, and Magnitude of Haze and Fog Episodes during Wintertime in the Indo Gangetic Plain

Aerosols are an important part of Earth's atmosphere. They can absorb, scatter, or reflect the incoming solar radiation, which results in heating or cooling of Earth, thus impacting its climate. It affects the health of exposed human population adversely, reduces visibility, disturbs environmental systems, and causes material damage. This study summarizes the research carried out to understand the role of aerosol load and its physicochemical characteristics on occurrence, frequency, and magnitude of haze and fog events during wintertime within the Indo Gangetic Plain (IGP) in the past decade. For most species, the highest concentration was measured during foggy events at night-time over the winter season. A few species such as water-soluble organic and inorganic carbon (WSOC and WSIC), K⁺, SO₄ ^2-, and NO₃ ^-, owing to their hygroscopic nature, were efficiently scavenged, resulting in their lower concentration within the interstitial aerosol during fog episodes. Oligomerization with hydroxy and carbonyl functional groups during AFP (activating fog period) and DFP (dissipating fog period), respectively, accompanied by acidic aerosol (having catalytic ability) and high aerosol liquid water content conditions was found to be significant. Whereas the fragmentation process was dominant along with functionalization of -RCOOH or carbonyl (aldehyde/ketone) and -RCOOH moieties during FP (fog period) and PoFP (post-fog period), respectively. Transition metals play an important role in aqueous production of secondary organic aerosol (SOA) especially during the night-time. Crustal sources had the highest scavenging efficiency along with WSOC playing an important role in nucleation scavenging. Fine droplets had a higher concentration of species with a larger fraction of highly oxidized organic matter (OM) as compared to coarse or medium size droplets. Also, a new approach to calculate absorption by black carbon (BC) and brown carbon (BrC) was proposed, which found the water-soluble brown carbon (WSBrC) absorption value in aerosol to be up to 1.8 times higher than that measured in their corresponding aqueous extracts. Organic aerosol plays a vital role in facilitating fog formation and is responsible for the longer residence time in the ambient atmosphere. Ammonia plays an important role in stabilizing organic aerosol and aids to this recurring haze-fog-haze cycle that is dominant during wintertime in the IGP. Therefore, controlling the major anthropogenic sources of organic aerosol and ammonia should be our top priority in this part of the world.

Apportionment of black and brown carbon spectral absorption sources in the urban environment of Athens, Greece, during winter

This study examines the spectral properties and source characteristics of absorbing aerosols (BC: Black Carbon; BrC: Brown Carbon, based on aethalometer measurements) in the urban background of Athens during December 2016-February 2017. Using common assumptions regarding the spectral dependence of absorption due to BC (AAE_BC = 1) and biomass burning (AAE_bb = 2), and calculating an optimal AAE_ff value for the dataset (1.18), the total spectral absorption was decomposed into five components, corresponding to absorption of BC and BrC from fossil-fuel (ff) combustion and biomass burning (bb), and to secondary BrC estimated using the BC-tracer minimum R-squared (MRS) method. Substantial differences in the contribution of various components to the total absorption were found between day and night, due to differences in emissions and meteorological dynamics, while BrC and biomass burning aerosols presented higher contributions at shorter wavelengths. At 370 nm, the absorption due to BC_ff contributed 36.3% on average, exhibiting a higher fraction (58.1%) during daytime, while the mean BC_bb absorption was estimated at 18.4%. The mean absorption contributions due to BrC_ff, BrC_bb and BrC_sec were 6.7%, 32.3% and 4.9%, respectively. The AbsBC_ff,370 component maximized during the morning traffic hours and was strongly correlated with NO_x (R² = 0.76) and CO (R² = 0.77), while a similar behavior was seen for the AbsBrC_ff,370 component. AbsBC_bb and AbsBrC_bb levels escalated during nighttime and were highly associated with nss-K⁺ and with the organic aerosol (OA) components related to fresh and fast-oxidized biomass burning (BBOA and SV-OOA) as obtained from ACSM measurements. Multiple linear regression was used to attribute BrC absorption to five OA components and to determine their absorption contributions and efficiencies, revealing maximum contributions of BBOA (33%) and SV-OOA (21%). Sensitivity analysis was performed in view of the methodological uncertainties and supported the reliability of the results, which can have important implications for radiative transfer models.

Mass absorption cross-section and absorption enhancement from long term black and elemental carbon measurements: A rural background station in Central Europe

Black carbon (BC) is a dominant aerosol light absorber, and its brown carbon (BrC) coating can enhance absorption and lead to uncertainties concerning the radiative forcing estimation. This study investigates the mass absorption cross-section of equivalent BC (MAC_eBC) during a long-term field measurement (2013-2017) at a rural Central European site. The MAC enhancement factor (E_abs) and the contribution of BrC coatings to the absorption coefficient (B_abs) were estimated by combining different approaches. The annual mean B_abs and MAC_eBC values decreased slightly over the measurement period associated with change in the submicron aerosol size distribution. Regardless of the wavelength, B_abs exhibited clear seasonal and diurnal variations, with higher values in winter when a higher absorption Ångström exponent (1.4) was observed due to the local biomass burning (BB). In contrast, MAC_eBC did not have a distinct temporal trend at 600 nm (7.84 ± 2.79 m² g^-1), while it showed a seasonal trend at 370 nm with higher values in winter (15.64 ± 4.77 m² g^-1). During this season, E_{abs_660} was 1.18 ± 0.27 and did not exhibit any clear wavelength dependence, despite the influence of BB. During the study period, BrC-attributed absorption was observed in 31% of the samples, with a contribution of up to 40% of total B_abs. In summer, the E_{abs_660} increased to 1.59 ± 0.60, when a larger BC coating could be formed by secondary aerosol fractions. During this season, MAC_{eBC_660} and E_{abs_660} showed comparable source profiles that were mainly associated with aged air masses over central Europe, thereby supporting the fact that characteristics of coating materials formed during atmospheric aging are a major factor driving the MAC_{eBC_660} measured at the regional background site. Further field investigations of the composition of BC coatings would help to better understand and estimate uncertainties related to the radiative effect of aerosols.

Brownness of Organic Aerosol over the United States: Evidence for Seasonal Biomass Burning and Photobleaching Effects

Light-absorptivity of organic aerosol may play an important role in visibility and climate forcing, but it has not been assessed as extensively as black carbon (BC) aerosol. Based on multiwavelength thermal/optical analysis and spectral mass balance, this study quantifies BC for the U.S. Interagency Monitoring of Protected Visual Environments (IMPROVE) network while developing a brownness index (γ_Br) for non-BC organic carbon (OC*) to illustrate the spatiotemporal trends of light-absorbing brown carbon (BrC) content. OC* light absorption efficiencies range from 0 to 3.1 m² gC^-1 at 405 nm, corresponding to the lowest and highest BrC content of 0 and 100%, respectively. BC, OC*, and γ_Br explain >97% of the variability of measured spectral light absorption (405-980 nm) across 158 IMPROVE sites. Network-average OC* light absorptions at 405 nm are 50 and 28% those for BC over rural and urban areas, respectively. Larger organic fractions of light absorption occur in winter, partially due to higher organic brownness. Winter γ_Br exhibits a dramatic regional/urban-rural contrast consistent with anthropogenic BrC emissions from residential wood combustion. The spatial differences diminish to uniformly low γ_Br in summer, suggesting effective BrC photobleaching over the midlatitudes. An empirical relationship between BC, ambient temperature, and γ_Br is established, which can facilitate the incorporation of organic aerosol absorptivity into climate and visibility models that currently assume either zero or static organic light absorption efficiencies.

Brown carbon light absorption over an urban environment in northern peninsular Southeast Asia

Light-absorbing organic carbon (or brown carbon, BrC) has been recognized as a critical driver in regional-to-global climate change on account of its significant contribution to light absorption. BrC sources vary from primary combustion processes (burning of biomass, biofuel, and fossil fuel) to secondary formation in the atmosphere. This paper investigated the light-absorbing properties of BrC such as site-specific mass absorption cross-section (MAC_BrC), absorption Ångström exponent (AAE_BrC), and the absorbing component of the refractive index (k_BrC) by using light absorption measurements from a 7-wavelength aethalometer over an urban environment of Chiang Mai, Thailand in northern peninsular Southeast Asia (PSEA), from March to April 2016. The contribution of BrC to total aerosol absorption (mean ± SD) was 46 ± 9%, 29 ± 7%, 24 ± 6%, 20 ± 4%, and 15 ± 3% at 370, 470, 520, 590, and 660 nm, respectively, highlighting the significant influence of BrC absorption on the radiative imbalance over northern PSEA. Strong and significant associations between BrC light absorption and biomass-burning (BB) organic tracers highlighted the influence of primary BB emissions. The median MAC_BrC and k_BrC values at 370 nm were 2.4 m² g^-1 and 0.12, respectively. The fractional contribution of solar radiation absorbed by BrC relative to BC (mean ± SD) in the 370-950 nm range was estimated to be 34 ± 7%, which can significantly influence the regional radiation budget and consequently atmospheric photochemistry. This study provides valuable information to understand BrC absorption over northern PSEA and can be used in model simulations to reassess the regional climatic impact with greater accuracy.

Review of Respirable Coal Mine Dust Characterization for Mass Concentration, Size Distribution and Chemical Composition

Respirable coal mine dust (RCMD) exposure is associated with black lung and silicosis diseases in underground miners. Although only RCMD mass and silica concentrations are regulated, it is possible that particle size, surface area, and other chemical constituents also contribute to its adverse health effects. This review summarizes measurement technologies for RCMD mass concentrations, morphology, size distributions, and chemical compositions, with examples from published efforts where these methods have been applied. Some state-of-the-art technologies presented in this paper have not been certified as intrinsically safe, and caution should be exerted for their use in explosive environments. RCMD mass concentrations are most often obtained by filter sampling followed by gravimetric analysis, but recent requirements for real-time monitoring by continuous personal dust monitors (CPDM) enable quicker exposure risk assessments. Emerging low-cost photometers provide an opportunity for a wider deployment of real-time exposure assessment. Particle size distributions can be determined by microscopy, cascade impactors, aerodynamic spectrometers, optical particle counters, and electrical mobility analyzers, each with unique advantages and limitations. Different filter media are required to collect integrated samples over working shifts for comprehensive chemical analysis. Teflon membrane filters are used for mass by gravimetry, elements by energy dispersive X-ray fluorescence, rare-earth elements by inductively coupled plasma-mass spectrometry and mineralogy by X-ray diffraction. Quartz fiber filters are analyzed for organic, elemental, and brown carbon by thermal/optical methods and non-polar organics by thermal desorption-gas chromatography-mass spectrometry. Polycarbonate-membrane filters are analyzed for morphology and elements by scanning electron microscopy (SEM) with energy dispersive X-ray, and quartz content by Fourier-transform infrared spectroscopy and Raman spectroscopy.

Spectral absorption properties of organic carbon aerosol during a polluted winter in Beijing, China

A fraction of organic carbon (OC) is found to exhibit the capability to absorb solar radiation. However, the absorption properties of OC remain poorly characterized partly due to uncertainties in determination methods. In this study, the absorption coefficient (b_ap) of OC (b_ap,OC) in Beijing during a polluted winter was estimated on the basis of the combined measurements of black carbon (BC) size distribution and total aerosol b_ap (b_ap,meas). The bare BC b_ap (b_ap,bareBC) calculated using Mie theory on the basis of measured size distribution exhibited weak wavelength dependence, with a mean absorption Ångström exponent (AAE) of 0.56 ± 0.04 within the 470-660 nm wavelength range, which was lower than the value of 1 commonly used for freshly emitted BC. The calculated b_ap,bareBC was compared with b_ap,meas at 950 nm to derive the coating thickness of BC, from which the calculation of coated BC b_ap (b_ap,coatBC) within 370-660 nm was based using the core-shell Mie model. Given the thick coatings, the AAE of coated BC, with a mean of 0.53 ± 0.12, was slightly lower than that of bare BC. Subsequently, b_ap,OC was obtained by subtracting b_ap,coatBC from b_ap,meas, accounting for 59.57 ± 4.82% of b_ap,meas at 370 nm on average. The average mass absorption efficiency of OC was estimated to be 1.48 ± 0.36 m² g^-1 at 370 nm. b_ap,OC significantly decreased as wavelength increased, deriving an AAE of OC with a mean of 2.72 ± 0.32 within the 370-660 nm range. The level of b_ap,OC estimated on the basis of a widely used attribution method assuming a constant BC AAE of 1 was ~60% lower than the currently presented value, probably underestimating OC radiative effect by a factor of >3. More accurate estimations of b_ap,OC based on more advanced measurements and suitable theory calculations are recommended to provide more reliable assessments of OC radiative effects.

Quantification of carboxyl-functionalized multiwall carbon nanotubes in plant tissues with programmed thermal analysis

In this study, carboxyl functionalized multiwall carbon nanotubes (c-MWCNTs) in plant (lettuce [Lactuca sativa Bionda Ricciolina]) tissues were quantitatively analyzed with programmed thermal analysis coupled with a sequential digestion. Programmed thermal analysis evidenced a linear relationship between c-MWCNT-bound C and elemental C detected. A detection limit of 114-708 μg C g-1 plant tissues (dry mass) was achieved for analysis of c-MWCNTs. The method was demonstrated using the tissues of lettuce cultured hydroponically for 3 wk with c-MWCNTs at an exposure of 10 and 20 μg ml-1 . This quantitative analysis can be used to provide insights into carbon nanotube exposure through agricultural products and promote its sustainable application.

Spatial and temporal variability of brown carbon in United States: implications for direct radiative effects

A newly developed dataset from the Interagency Monitoring of PROtected Visual Environments (IMPROVE) observation network, combined with a 3-D chemical transport model, is used to evaluate the spatial and temporal variability of brown carbon (BrC) in the United States. The model with BrC emitted from biomass burning and biofuel emissions agrees with the seasonal and spatial variability of BrC planetary boundary layer (PBL) absorption aerosol optical depth (AAOD) observations within a factor of 2. The model without whitening, the tendency for absorption to decrease with aerosol aging, overestimates the observed BrC PBL AAOD, and does not reflect the measured BrC PBL AAOD spatial variability. The model shows higher absorption direct radiative effects (DRE) from BrC at northern high latitudes than at mid-latitudes in spring and summer, due to boreal fire emissions, long whitening lifetimes and high surface albedos. These findings highlight the need to study BrC over the Arctic region.

Changing Nature of Organic Carbon over the United States

Total organic carbon (TOC) mass concentrations are decreasing across the contiguous United States (CONUS). We investigate decadal trends in organic carbon (OC) thermal fractions [OC1 (volatilizes at 140 °C), OC2 (280 °C), OC3 (480 °C), OC4 (580 °C)] and pyrolyzed carbon (PC), reported at 121 locations in the Interagency Monitoring of Protected Visual Environments (IMPROVE) network from 2005 to 2015 for 23 regions across the CONUS. Reductions in PC and OC2 drive decreases in TOC (TOC = OC1 + OC2 + OC3 + OC4 + PC) mass concentrations. OC2 decreases by 40% from 2005 to 2015, and PC decreases by 34%. The largest absolute mass decreases occur in the eastern United States, and relative changes normalized to local concentrations are more uniform across the CONUS. OC is converted to organic mass (OM) using region- and season-specific OM:OC ratios. Simulations with GEOS-Chem reproduce OM trends and suggest that decreases across the CONUS are due to aerosol liquid water (ALW) chemistry. Individual model species, notably aerosol derived from isoprene oxidation products and formed in ALW, correlate significantly (p < 0.05) with OM2, even in arid regions. These findings contribute to literature that suggests air quality rules aimed at SO₂ and NO_x emissions induce the cobenefit of reducing organic particle mass through ALW chemistry, and these benefits extend beyond the eastern United States.

Developing a Low-Cost Passive Method for Long-Term Average Levels of Light-Absorbing Carbon Air Pollution in Polluted Indoor Environments

We propose a low-cost passive method for monitoring long-term average levels of light-absorbing carbon air pollution in polluted indoor environments. Building on prior work, the method here estimates the change in reflectance of a passively exposed surface through analysis of digital images. To determine reproducibility and limits of detection, we tested low-cost passive samplers with exposure to kerosene smoke in the laboratory and to environmental pollution in 20 indoor locations. Preliminary results suggest robust reproducibility (r = 0.99) and limits of detection appropriate for longer-term (~1-3 months) monitoring in households that use solid fuels. The results here suggest high precision; further testing involving "gold standard" measurements is needed to investigate accuracy.

Brown carbon aerosol in two megacities in the Sichuan Basin of southwestern China: Light absorption properties and implications

The light absorption of brown carbon (BrC) makes a significant contribution to aerosol light absorption (Abs) and affects the radiative forcing. In this study, we analyzed and evaluated the light absorption and radiative forcing of BrC samples collected from December 2016 to January 2017 in Chongqing and Chengdu in the Sichuan Basin of Southwest China. Based on a two-component model, we estimated that BrC light absorption at 405 nm was 19.9 ± 17.1 Mm^-1 and 19.2 ± 12.3 Mm^-1 in Chongqing and Chengdu, contributing 19.0 ± 5.0% and 17.8 ± 3.7% to Abs respectively. Higher Abs_405,BrC, MAE_405,BrC, and AAE_405-980 values were observed during the pollution period over the clean period in both cities. The major sources of BrC were biomass burning (BB) and secondary organic aerosol in Chongqing, and coal combustion (CC) and secondary organic aerosol in Chengdu. During the pollution period, aged BrC formed from anthropogenic precursors via its aqueous reactions with NH₄⁺ and NOx had impacts on BrC absorption in both cities. BB led to higher Abs_405,BrC, MAE_405,BrC, and AAE_405-980 values in Chongqing than Chengdu during the pollution period. The fractional contribution of radiation absorbed by BrC relative to BC in the wavelengths of 405-445 nm was 60.2 ± 17.0% and 64.2 ± 11.6% in Chongqing and Chengdu, significantly higher than that in the range of 405-980 nm (26.2 ± 6.7% and 27.7 ± 4.6% respectively) (p < 0.001). This study is useful for understanding the characterization, sources, and impacts of BrC in the Sichuan Basin.

Microparticle separation using asymmetrical induced-charge electro-osmotic vortices on an arc-edge-based floating electrode

We developed a device for particle separation by designing an arc-edge-based floating electrode to alternately actuate opposite-direction asymmetrical induced-charge electro-osmotic vortices.