Inhalation exposure to volatile organic compounds in the printing industry

Characterization of VOCs emissions and associated health risks inherent to the packaging and printing industries in Shandong Province, China

Comprehensive volatile organic compounds (VOCs) emission control is imperative to decreasing occupational health risks and environmental impact of the packaging and printing industries. In this work, we investigated the VOCs emission characteristics and concentrations of individual contaminants generated by the packaging and printing industries, with regard to various categories, processes, and geographic regions. VOCs emissions, ozone formation potential (OFP), and associated health risks were assessed at 10 representative packaging and printing firms across several cities in Shandong Province, China. Plastic packaging enterprises had the greatest levels of unorganized VOCs emissions, consisting predominantly of oxygenated volatile organic compounds (OVOCs), followed by alkanes and halocarbons. From metal and paper packaging enterprises, OVOCs, alkanes, and aromatics were significant components of unorganized VOCs emissions. Aromatics, halocarbons, and OVOCs contributed significantly to OFP in workshops. The potential carcinogenic risk associated with VOCs in the packaging and printing industries was not significant. However, according to the findings in this study, the workshop environment may provide a comparatively elevated non-carcinogenic risk attributable to ethyl acetate, isopropanol, acrolein, 1,1,2-Trichloroethane, 1,2-Dichloropropane, and naphthalene exposure. In particular, the endocrine-disrupting and genetic toxic effects caused by benzene, toluene, styrene, and naphthalene should not be overlooked. Thus, it is essential to provide precedence to the working environment conditions of workshop laborers, while also undertaking scientific and systematic measures to mitigate the detrimental impacts of VOCs on the environment and human welfare.

Metal-Organic Frameworks in Surface Enhanced Raman Spectroscopy-Based Analysis of Volatile Organic Compounds

Volatile Organic Compounds (VOC) are a major class of environmental pollutants hazardous to human health, but also highly relevant in other fields including early disease diagnostics and organoleptic perception of aliments. Therefore, accurate analysis of VOC is essential, and a need for new analytical methods is witnessed for rapid on-site detection without complex sample preparation. Surface-Enhanced Raman Spectroscopy (SERS) offers a rapidly developing versatile analytical platform for the portable detection of chemical species. Nonetheless, the need for efficient docking of target analytes at the metallic surface significantly narrows the applicability of SERS. This limitation can be circumvented by interfacing the sensor surface with Metal-Organic Frameworks (MOF). These materials featuring chemical and structural versatility can efficiently pre-concentrate low molecular weight species such as VOC through their ordered porous structure. This review presents recent trends in the development of MOF-based SERS substrates with a focus on elucidating respective design rules for maximizing analytical performance. An overview of the status of the detection of harmful VOC is discussed in the context of industrial and environmental monitoring. In addition, a survey of the analysis of VOC biomarkers for medical diagnosis and emerging applications in aroma and flavor profiling is included.

Species profile and reactivity of volatile organic compounds emission in solvent uses, industry activities and from vehicular tunnels

A survey was conducted of the volatile organic compounds (VOCs) released from sources of solvent use, industry activities and vehicle emissions in Guiyang, a capital city of China. Samples were collected by canisters and analyzed by GC-MS-FID. The species profiles of VOCs emitted from sources were obtained. Results showed that xylenes, ethylbenzene, acetone and dichloromethane were the characteristics species for painting, 2-propanol and ethyl acetate for printing, α-pinene for solid wood furniture manufacturing, and 2-butanone for biscuit baking. These characteristics species could be as tracers for the sources respectively. In most of samples from the solvent use, the benzene/toluene (B/T) ratio was less than 0.3, indicating that the ratio could be as the indicator for tracing the solvent use related sources. The results also suggested that the toluene/xylene (T/X) ratio be as the indicator to distinguish the VOCs sources of painting (<2) from the printing (>2). Aromatics contributed the most to ozone formation potential (OFP) of most painting and non-paper printing sources, and oxygen-containing VOCs (OVOCs) were major species contributing to OFP of the sources from food production and paper printing. The OFP of the VOCs emissions from vehicle in tunnels and from other manufactures were dominated by both aromatics and alkenes. The α-pinene could explain 56.94% and 32.54% of total OFP of the VOCs sources from filing cabinet and solid wood furniture manufacturing, which was rarely been involved in previous studies of VOCs source profiles, indicating that the species of concern for VOCs sources are still insufficient at present.

Wearable Device for Cumulative Chlorobenzene Detection and Accessible Mitigation Strategies

Chronic exposure to low concentrations of volatile organic compounds (VOCs), such as chlorobenzene, is not being monitored in industrializing countries, although VOC exposure is associated with carcinogenic, organ-toxic, and endocrine-disrupting effects. Current VOC-sensing technologies are inaccessible due to high cost, size, and maintenance or are ineffective due to poor sensitivity or reliability. In particular, marginalized individuals face barriers to traditional prescription VOC treatments due to cost, lack of transportation, and limited access to physicians; thus, alternative treatments are needed. Here, we created a novel cumulative wearable color-changing VOC sensor with a paper-based polydiacetylene sensor array for chlorobenzene. With a single smartphone picture, the sensor displays 14 days of logged chlorobenzene exposure data, interpreted by machine-learning (ML) techniques, including principal component analysis. Further, we explored the efficacy of affordable and accessible treatment options to mitigate a VOC's toxic effects. Vitamin D and sulforaphane are naturally found in cruciferous vegetables, like broccoli, and can be used to treat chlorobenzene-mediated bone degradation. Our platform combines these components into a smartphone app that photographs the sensor's colorimetric data, analyzes the data via ML techniques, and offers accessible treatments based on exposure data.

Characterization of different contaminants and current knowledge for defining chemical mixtures in human milk: A review

Hundreds of xenobiotics, with very diverse origins, have been detected in human milk, including contaminants of emerging concern, personal care products and other current-use substances reflecting lifestyle. The routes of exposure to these chemicals include dermal absorption, ingestion and inhalation. Specific families of chemicals are dominant among human milk monitoring studies (e.g., organochlorine pesticides, bisphenol A, dioxins), even though other understudied families may be equally toxicologically relevant (e.g., food-processing chemicals, current-use plasticizers and flame retardants, mycotoxins). Importantly, the lack of reliable human milk monitoring data for some individual chemicals and, especially, for complex mixtures, is a major factor hindering risk assessment. Non-targeted screening can be used as an effective tool to identify unknown contaminants of concern in human milk. This approach, in combination with novel methods to conduct risk assessments on the chemical mixtures detected in human milk, will assist in elucidating exposures that may have adverse effects on the development of breastfeeding infants.

Environmental and Human Health Impact of Disposable Face Masks During the COVID-19 Pandemic: Wood-Feeding Termites as a Model for Plastic Biodegradation

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). On the eve of the COVID-19 pandemic, there is a tremendous increase in the production of plastic-based PPE. To control the spread of the virus, face masks (FMs) are used as primary PPE. Thus, the production and usage of FM significantly increased as the COVID-19 pandemic was still escalating. The primary raw materials for the manufacturing of FMs are non-biodegradable synthetic polymers derived from petrochemicals. This calls for an urgent need to develop novel strategies for the efficient degradation of plastics. Furthermore, most of these masks contain plastic or other derivatives of plastic. The extensive usage of FM generates millions of tons of plastic waste for the environment in a short span of time. However, their degradation in the environment and consequences are poorly understood. Therefore, the potential impacts of disposable FM on the environment and human health during the COVID-19 pandemic are clarified in the present study. Despite structural and recalcitrance variations, lignocellulose and plastic polymers have physicochemical features, including carbon skeletons with comparable chemical bonds as well as hydrophobic properties in amorphous and crystalline regions. In this review, we argue that there is much to be learned from termites by transferring knowledge from research on lignocellulose degradation by termites to that on plastic waste.

Temporary and Permanent Auditory Effects Associated with Occupational Coexposure to Low Levels of Noise and Solvents

This study aimed to assess temporary and permanent auditory effects associated with occupational coexposure to low levels of noise and solvents. Cross-sectional study with 25 printing industry workers simultaneously exposed to low noise (<80 dBA TWA) and low levels of solvents. The control group consisted of 29 industry workers without the selected exposures. Participants answered a questionnaire and underwent auditory tests. Auditory fatigue was measured by comparing the acoustic reflex threshold before and after the workday. Workers coexposed to solvents and noise showed significantly worse results in auditory tests in comparison with the participants in the control group. Auditory brainstem response results showed differences in III−V interpeak intervals (p = 0.046 in right ear; p = 0.039 in left ear). Mean dichotic digits scores (exposed = 89.5 ± 13.33; controls = 96.40 ± 4.46) were only different in the left ear (p = 0.054). The comparison of pre and postacoustic reflex testing indicated mean differences (p = 0.032) between the exposed (4.58 ± 6.8) and controls (0 ± 4.62) groups. This study provides evidence of a possible temporary effect (hearing fatigue) at the level of the acoustic reflex of the stapedius muscle. The permanent effects were identified mainly at the level of the high brainstem and in the auditory ability of binaural integration.

Environmental risks of disposable face masks during the pandemic of COVID-19: Challenges and management

Since the COVID-19 outbreak in early 2020, face mask (FM) has been recognized as an effective measure to reduce the infection, increasing its consumption across the world. However, the large amount of at-home FM usage changed traditional medical waste management practices, lack of improper management. Currently, few studies estimate FM consumption at a global scale, not to say a comprehensive investigation on the environmental risks of FM from a life cycle perspective. Therefore, global FM consumption and its associated environmental risks are clarified in the present study. Our result shows that 449.5 billion FMs were consumed from January 2020 to March 2021, with an average of 59.4 FMs per person worldwide. This review also provides a basis to understand the environmental risk of randomly disposed of FM and highlights the urgent requirement for the attention of FMs waste management to prevent pollution in the near future.

Benchmark Dose Modeling Approaches for Volatile Organic Chemicals using a Novel Air-Liquid Interface In Vitro Exposure System

Inhalation is the most relevant route of volatile organic chemical (VOC) exposure; however, due to unique challenges posed by their chemical properties and poor solubility in aqueous solutions, in vitro chemical safety testing is predominantly performed using direct application dosing/submerged exposures. To address the difficulties in screening toxic effects of VOCs, our cell culture exposure system permits cells to be exposed to multiple concentrations at air-liquid interface (ALI) in a 24-well format. ALI exposure methods permit direct chemical-to-cell interaction with the test article at physiological conditions. In the present study, BEAS-2B and primary normal human bronchial epithelial cells (pHBEC) are used to assess gene expression, cytotoxicity, and cell viability responses to a variety of volatile chemicals including acrolein, formaldehyde, 1,3-butadiene, acetaldehyde, 1-bromopropane, carbon tetrachloride, dichloromethane, and trichloroethylene. BEAS-2B cells were exposed to all the test agents, while pHBECs were only exposed to the latter four listed above. The VOC concentrations tested elicited only slight cell viability changes in both cell types. Gene expression changes were analyzed using benchmark dose (BMD) modeling. The BMD for the most sensitive gene set was within one order of magnitude of the threshold-limit value reported by the American Conference of Governmental Industrial Hygienists, and the most sensitive gene sets impacted by exposure correlate to known adverse health effects recorded in epidemiologic and in vivo exposure studies. Overall, our study outlines a novel in vitro approach for evaluating molecular-based points-of-departure in human airway epithelial cell exposure to volatile chemicals.

Volatile organic compound (VOC) emissions and health risk assessment in paint and coatings industry in the Yangtze River Delta, China

Solvent use and paint consumption are significant source sectors of volatile organic compounds (VOCs) emissions in China. The occupational painters have high risk of health effect due to exposure to high VOCs concentration. However, the toxic components in coating environment have not been carefully identified, and the health risks of VOCs exposure have not been sufficiently assessed. This study collected air samples from nine workshops of three major coating sectors in the Yangtze River Delta of China, namely cargo container coating, ship equipment coating, and furniture coating, to evaluate the non-cancer and cancer risk of toxic VOCs exposure to occupational painters under a normal working condition. The results show that the container coating had highest cancer risk (2.29 × 10^-6-5.53 × 10^-6) exceeding the safe limit of 1.0 × 10^-6, while non-cancer risk of all workshops was lower than acceptable level of 1. Ethylbenzene and 1,2-dichloropropane should be targeted for priority removal during the container coating process in attempt to reduce adverse health effect on the occupational painters. This study helps better understand the health risk of VOCs exposure in coating workshops in China and provides information for policy-makers to formulate possible control of specific toxic compounds during coating process.

Temperature dependence of source profiles for volatile organic compounds from typical volatile emission sources

Source profiles of volatile organic compounds (VOCs) emitted from the evaporation of various fuels, industrial raw materials, processes and products are still limited in China. The impact of ambient temperature on the VOC released from these fugitive emission sources has also been rarely reported. In order to establish VOC source profiles for thirteen volatile emission sources, a sampling campaign was conducted in Central China, and five types of sources were investigated both in winter and summer. The dominant VOC groups varied in different sources, and they were alkanes (78.6%), alkenes (53.1%), aromatics (55.1%), halohydrocarbons (80.7%) and oxygenated VOCs (OVOCs) (76.0%), respectively. Ambient temperature showed different impacts on VOC source profiles and specific species ratios. The mass percentages of halohydrocarbons emitted from color printing and waste transfer station in summer were 42 times and 20 times higher than those in winter, respectively. The mass percentages of OVOCs emitted from car painting, waste transfer station and laundry emission sources were much higher in summer (7.9-27.8%) than those in winter (0.8-2.6%). On the contrary, alkanes from color printing, car painting and waste transfer stations were about 11, 4 and 5 times higher in winter than those in summer, respectively. The coefficient of divergence values for the source profiles obtained in winter and summer ranged in 0.3-0.7, indicating obvious differences of source profiles. Benzene/toluene ratio varied in 0.00-0.76, and it was in the range of 0.02-0.50 in winter and 0.04-0.52 in summer for the same sources, respectively. Hexanal, isobutene, m,p-xylene, toluene, 2-methylacrolein, styrene, 1-hexane and cis-2-butene dominated the ozone formation potentials (OFP). The OFP summer/winter differences were 5-320 times by MIR method and 1-79 times by Propy-Equiv method, respectively. This study firstly gave direct evidence that ambient temperature modified the mass percentages of VOC species obviously. It is important for improving VOC source apportionment and chemical reactivity simulation.

Personal noise exposure assessment of Kuwaiti printing industry workers

Recent technological improvements in the printing industry may have altered noise exposures in printeries. Of the eight printery noise assessments published since 2000, none assessed the exposure of workers using computer-to-plate machines and only two used personal noise dosimetry. This method measures noise levels as the worker moves about and permits examination of the impulsiveness of noise levels. In this study, 104 workers wore personal noise dosimeters for one full shift. Computer-to-plate operators experienced noise exposures of 75 dB(A) on average and were rarely exposed to noise levels greater than 85 dB(A). Noise exposure in excess of 85 dB(A) was still common among offset printer operators. In fact, all workers operating web-fed offset machines spent more than half the shift experiencing noise levels greater than 85 dB(A). We found that the 5-min rolling SD of noise levels accurately reflected the impulsivity observed in the noise level profile.