Impact of transport and drug properties on the local pharmacology of drug-eluting stents

Endovascular Drug Delivery

Drug-eluting stents (DES) and balloons revolutionize atherosclerosis treatment by targeting hyperplastic tissue responses through effective local drug delivery strategies. This review examines approved and emerging endovascular devices, discussing drug release mechanisms and their impacts on arterial drug distribution. It emphasizes the crucial role of drug delivery in modern cardiovascular care and highlights how device technologies influence vascular behavior based on lesion morphology. The future holds promise for lesion-specific treatments, particularly in the superficial femoral artery, with recent CE-marked devices showing encouraging results. Exciting strategies and new patents focus on local drug delivery to prevent restenosis, shaping the future of interventional outcomes. In summary, as we navigate the ever-evolving landscape of cardiovascular intervention, it becomes increasingly evident that the future lies in tailoring treatments to the specific characteristics of each lesion. By leveraging cutting-edge technologies and harnessing the potential of localized drug delivery, we stand poised to usher in a new era of precision medicine in vascular intervention.

Modeling Dual Drug Delivery from Eluting Stents: The Influence of Non-Linear Binding Competition and Non-Uniform Drug Loading

OBJECTIVE

There is increasing interest in simultaneous endovascular delivery of more than one drug from a drug-loaded stent into a diseased artery. There may be an opportunity to obtain a therapeutically desirable uptake profile of the two drugs over time by appropriate design of the initial drug distribution in the stent. Due to the non-linear, coupled nature of diffusion and reversible specific/non-specific binding of both drugs as well as competition between the drugs for a fixed binding site density, a comprehensive numerical investigation of this problem is critically needed.

METHODS

This paper presents numerical computation of dual drug delivery in a stent-artery system, accounting for diffusion as well as specific and non-specific reversible binding. The governing differential equations are discretized in space, followed by integration over time using a stiff numerical solver. Three different cases of initial dual drug distribution are considered.

RESULTS

For the particular case of sirolimus and paclitaxel, results show that competition for a limited non-specific binding site density and the significant difference in the forward/backward reaction coefficients play a key role in determining the nature of drug uptake. The nature of initial distribution of the two drugs in the stent is also found to influence the binding process, which can potentially be used to engineer a desirable dual drug uptake profile.

CONCLUSIONS

These results help improve the fundamental understanding of endovascular dual drug delivery. In addition, the numerical technique and results presented here may be helpful for designing and optimizing other drug delivery problems as well.

An unsteady analysis of two-phase binding of drug in an asymmetric stenosed vessel

In this paper, we investigate endovascular delivery to get a step ahead of the pharmacological limitations it has due to the complexity of dealing with a patient-specific vessel through a mathematical model. We divide the domain of computation into four sub-domains: the lumen, the lumen-tissue interface, the upper tissue and the lower tissue which are extracted from an asymmetric atherosclerotic image derived by the intravascular ultrasound (IVUS) technique. The injected drug at the luminal inlet is transported with the streaming blood which is considered Newtonian. An irreversible uptake kinetics of the injected drug at the lumen-tissue interface from the luminal side to the tissue domains is assumed. Subsequently, the drug is dispersed within the tissue followed by its retention in the extracellular matrix (ECM) and by receptor-mediated binding. The Marker and Cell (MAC) method has been leveraged to get a quantitative insight into the model considered. The effect of the wall absorption parameter on the concentration of all drug forms (free as well as two-phase bound) has been thoroughly investigated, and some other important factors, such as the averaged concentration, the tissue content, the fractional effect, the concentration variance and the effectiveness of drug have been graphically analyzed to gain a clear understanding of endovascular delivery. The simulated results predict that with increasing values of the absorption parameter, the averaged concentrations of all drug forms do decrease. An early saturation of binding sites takes place for smaller values of the absorption parameter, and also rapid saturation of ECM binding sites occurs as compared to receptor binding sites. Results also predict the influence of surface roughness as well as asymmetry of the domain about the centerline on the distribution and retention of drug. A thorough sensitivity analysis has been carried out to determine the influence of some parameters involved.

Acute Stent-Induced Endothelial Denudation: Biomechanical Predictors of Vascular Injury

Recent concern for local drug delivery and withdrawal of the first Food and Drug Administration-approved bioresorbable scaffold emphasizes the need to optimize the relationships between stent design and drug release with imposed arterial injury and observed pharmacodynamics. In this study, we examine the hypothesis that vascular injury is predictable from stent design and that the expanding force of stent deployment results in increased circumferential stress in the arterial tissue, which may explain acute injury poststent deployment. Using both numerical simulations and ex vivo experiments on three different stent designs (slotted tube, corrugated ring, and delta wing), arterial injury due to device deployment was examined. Furthermore, using numerical simulations, the consequence of changing stent strut radial thickness on arterial wall shear stress and arterial circumferential stress distributions was examined. Regions with predicted arterial circumferential stress exceeding a threshold of 49.5 kPa compared favorably with observed ex vivo endothelial denudation for the three considered stent designs. In addition, increasing strut thickness was predicted to result in more areas of denudation and larger areas exposed to low wall shear stress. We conclude that the acute arterial injury, observed immediately following stent expansion, is caused by high circumferential hoop stresses in the interstrut region, and denuded area profiles are dependent on unit cell geometric features. Such findings when coupled with where drugs move might explain the drug–device interactions.

Specific and nonspecific binding of drug eluted from a half-embedded stent in presence of atherosclerotic plaque

This study is dealt with the two-phase binding (specific and nonspecific) of drug eluted from a half- embedded drug-eluting stent in presence of atherosclerotic plaque. The specific binding due to the interaction of drug molecules with specific receptors and nonspecific binding caused by the trapping of drug in the extra-cellular matrix have been paid due attention. An idealised wall consisting of a plaque and a healthy tissue region has been considered. Moreover, a Dirichlet release condition is imposed on the strut surface. In this investigation, a two-dimensional model governing drug transport and its two-phase binding in cylindrical polar coordinate system has been solved numerically by a finite-difference method. Our simulation predicts that plaque behaves like a physical barrier in two types of the binding process and there is an inverse relationship between bound drug concentration and plaque thickness. Simulations show that a single peak profile of drug is noted when the struts are situated one-strut radius apart and as the inter-strut distance increases, the peak concentration falls and distinct peak profiles over each strut are visualised. The model also reveals that in the region downstream of a strut, the concentration of both bound drug forms in the plaque and healthy regions increases, and eventually, the saturation length of binding sites increases. Predicted results show for smaller Damköhler number, the rapid saturation of binding sites takes place and the stent having thinner strut may perform well in terms of effectiveness as well as efficacy in the stent-based delivery.

Cardiovascular Stents: A Review of Past, Current, and Emerging Devices

One of the leading causes of morbidity and mortality worldwide is coronary artery disease, a condition characterized by the narrowing of the artery due to plaque deposits. The standard of care for treating this disease is the introduction of a stent at the lesion site. This life-saving tubular device ensures vessel support, keeping the blood-flow path open so that the cardiac muscle receives its vital nutrients and oxygen supply. Several generations of stents have been iteratively developed towards improving patient outcomes and diminishing adverse side effects following the implanting procedure. Moving from bare-metal stents to drug-eluting stents, and recently reaching bioresorbable stents, this research field is under continuous development. To keep up with how stent technology has advanced in the past few decades, this paper reviews the evolution of these devices, focusing on how they can be further optimized towards creating an ideal vascular scaffold.

Efficacy of a Multiplex Paclitaxel Emission Stent Using a Pluronic® Mixture Membrane versus a Covered Metal Stent in Malignant Biliary Obstruction: A Prospective Randomized Comparative Study

Background/Aims

A drug-eluting stent for unresectable malignant biliary obstruction was developed to increase stent patency by preventing tumor ingrowth. The safety and efficacy of a new generation of metallic stents covered with a paclitaxel-incorporated membrane using a Pluronic^® mixture (MSCPM-II) were compared prospectively with those of covered metal stents (CMSs) in patients with malignant biliary obstructions.

Methods

This study was initially designed as a prospective randomized trial but was closed early because of a high incidence of early occlusion. Therefore, the data were analyzed using the intent-to-treat method. A total of 72 patients with unresectable distal malignant biliary obstructions were prospectively enrolled.

Results

The two groups did not differ significantly in basic characteristics and mean follow-up period (MSCPM-II 194 days vs CMS 277 days, p=0.063). Stent occlusion occurred in 14 patients (35%) who received MSCPM-II and in seven patients (21.9%) who received CMSs. Stent patency and survival time did not significantly differ between the two groups (p=0.355 and p=0.570). The complications were mild and resolved by conservative management in both groups.

Conclusions

There were no significant differences in stent patency or patient survival in MSCPM-II and CMS patients with malignant biliary obstructions.

Computational Model of Drug-Coated Balloon Delivery in a Patient-Specific Arterial Vessel with Heterogeneous Tissue Composition

Balloon angioplasty followed by local delivery of antiproliferative drugs to target tissue is increasingly being considered for the treatment of obstructive arterial disease, and yet there is much to appreciate regarding pharmacokinetics in arteries of non-uniform disease. We developed a computational model capable of simulating drug-coated balloon delivery to arteries of heterogeneous tissue composition comprising healthy tissue, as well as regions of fibrous, fibro-fatty, calcified and necrotic core lesions. Image processing using an unsupervised clustering technique was used to reconstruct an arterial geometry from a single, patient-specific color image obtained from intravascular ultrasound-derived virtual histology. Transport of free drug was modeled using a time-dependent reaction-diffusion model and the bound, immobilized drug using the time-dependent reaction equation. The governing equations representing the transport of free as well as bound drug along with a set of initial settings and boundary conditions were solved numerically using an explicit finite difference scheme that satisfied the Courant-Friedrichs-Lewy stability criterion. Our results support previous findings related to the transport and binding of drug in arteries where tissue retention is strongly dependent on local pharmacologic properties. Additionally, modeling results indicate that non-uniform disease composition leads to heterogeneous arterial drug distribution patterns, although further validation using animal studies is required to fully appreciate pharmacokinetics in disease-laden arteries.

Endovascular Drug Delivery and Drug Elution Systems: First Principles

Endovascular drug delivery continues to revolutionize the treatment of atherosclerosis in coronary and peripheral vasculature. The key has been to identify biologic agents that can counter the hyperplastic tissue responses to device expansion/implantation and to develop effective local delivery strategies that can maintain efficacious drug levels across the artery wall over the course of device effects. This article reviews the evolution of endovascular drug delivery technology, explains the mechanisms they use for drug release, and provides a quantitative mechanistic framework for relating drug release mode to arterial drug distribution and effect.

Drug diffusion and biological responses of arteries using a drug-eluting stent with nonuniform coating

The purpose of this study was to determine the effect of a nonuniform coating, abluminal-gradient coating (AGC), which leaves the abluminal surface of the curves and links parts of the stent free from the drug coating, on the diffusion direction of the drug and the biological responses of the artery to drug-eluting stent (DES) by comparing the AGC-sirolimus stent and the conventional full-surface coating (CFC) sirolimus stent. The study aimed to verify whether the AGC approach was appropriate for the development of a safer DES, minimizing the risks of stent thrombosis due to delayed endothelialization by the drug and distal embolization due to cracking of the coating layer on the hinge parts of the DES on stent expansion. In the in vitro local drug diffusion study, we used rhodamine B as a model drug, and rhodamine B released from the AGC stent diffused predominantly into the abluminal side of the alginate artery model. Conversely, rhodamine B released from the CFC stent quickly spread to the luminal side of the artery model, where endothelial cell regeneration is required. In the biological responses study, the luminal surface of the iliac artery implanted with the AGC-sirolimus stent in a rabbit iliac artery for 2 weeks was completely covered with endothelial-like cells. On the other hand, the luminal surface of the iliac artery implanted with the CFC-sirolimus stent for 2 weeks only showed partial coverage with endothelial-like cells. While thrombosis was observed in two of the three CFC-sirolimus stents, it was observed in only one of the three AGC-sirolimus stents. Taken together, these findings indicate that the designed nonuniform coating (AGC) is an appropriate approach to ensure a safer DES. However, the number of studies is limited and a larger study should be conducted to reach a statistically significant conclusion.

Controlling drug delivery from coronary stents: are we aiming for the right targets?

In this review article, the currently employed or explored delivery concepts for local intravascular drug delivery with drug-eluting stents (DES) are discussed with a special emphasis on clinical evidence regarding the desired release profiles. Traditional concepts to control drug release from DES include diffusion through polymers, polymer degradation and erosion as well as dissolution of particulate drug. Published clinical studies do not always reveal fine mechanistic details. The long duration of release favored for DES and the short duration of release favored for drug-eluting balloons require further investigation in experimental studies and clinical trials.

Nonvascular drug-eluting stent coated with sodium caprate-incorporated polyurethane for the efficient penetration of paclitaxel into tumor tissue

To increase the therapeutic potency of nonvascular drug-eluting stents, sodium caprate was employed as a drug-penetration enhancer. A polytetrafluoroethylene-covered drug-eluting stent was coated with a mixture containing sodium caprate, paclitaxel, and polyurethane via the rolling coating technique. The coated stent has a smooth membrane surface with a 40-µm membrane thickness. Paclitaxel was released from the coated stent for two months. In the multilayered cell sheet model, sodium caprate in the polyurethane membrane (PUSC10) showed the possibility of enhancing the paclitaxel tissue penetration. The amount of penetrated paclitaxel for the sodium caprate-containing polyurethane membrane (PUSC10) was two times higher than that of sodium caprate-free polyurethane membrane. Additionally, the potential of sodium caprate was confirmed by a tumor-bearing small animal model. PUSC10 incorporated with Nile red (as a model fluorescence dye for visualization of drug penetration; PUSC10–Nile red) or PUSC10 incorporated with paclitaxel (PUSC10–paclitaxel) membrane was implanted at tumor sites in Balb/c mice. In the case of PUSC10–Nile red, the tissue penetration depth of Nile red was significantly increased from 30 µm (without sodium caprate) to 1060 µm (with sodium caprate). After seven days, an almost four times higher therapeutic area of PUSC10–paclitaxel was observed compared to that of polyurethane–paclitaxel (without sodium caprate) by a terminal deoxynucleotidyl transferase dUTP nick end labeling assay. The results indicate that sodium caprate improves the penetration and therapeutic efficiencies of drugs in drug-eluting stents, and thus, it has potential for local stent therapy.

BioMatrix®Biolimus A9®-eluting coronary stent: a next-generation drug-eluting stent for coronary artery disease

Drug-eluting stent technology consisting of a bare metal stent, carrier coating, bioactive drug and delivery system, offers an almost infinite range of possible device configurations. A growing understanding of the mechanisms of restenosis allows for the design of synergistic functions within these components, thus providing a basis for new and improved products. The BioMatrix stent (Biosensors Interventional Technologies Pte Ltd., Singapore) elutes the new sirolimus derivative Biolimus A9 from a biodegradable polylactic acid polymer. Biolimus A9 possesses enhanced anti-inflammatory and antiproliferative activity with an improved pharmacokinetic profile. Permanent polymer-carrier-based platforms may be associated with inflammation, late thrombosis and restenosis. The BioMatrix, with its asymmetric and abluminal coating, releases Biolimus A9 into the vessel wall while the polylactic acid polymer is resorbed by surrounding tissues. Clinical studies have demonstrated the BioMatrix to be well tolerated and effective, and it has now become the subject of an aggressive clinical program.

A finite element study on variations in mass transport in stented porcine coronary arteries based on location in the coronary arterial tree

Drug-eluting stents have a significant clinical advantage in late-stage restenosis due to the antiproliferative drug release. Understanding how drug transport occurs between coronary arterial locations can better help guide localized drug treatment options. Finite element models with properties from specific porcine coronary artery sections (left anterior descending (LAD), right (RCA); proximal, middle, distal regions) were created for stent deployment and drug delivery simulations. Stress, strain, pore fluid velocity, and drug concentrations were exported at different time points of simulation (0-180 days). Tests indicated that the highest stresses occurred in LAD sections. Higher-than-resting homeostatic levels of stress and strain existed at upwards of 3.0 mm away from the stented region, whereas concentration of species only reached 2.7 mm away from the stented region. Region-specific concentration showed 2.2 times higher concentrations in RCA artery sections at times corresponding to vascular remodeling (peak in the middle segment) compared to all other segments. These results suggest that wall transport can occur differently based on coronary artery location. Awareness of peak growth stimulators and where drug accumulation occurs in the vasculature can better help guide local drug delivery therapies.

Drug/Medical Device Combination Products with Stimuli-responsive Eluting Surface

Drug-eluting medical devices are designed to improve the primary function of the device and at the same time offer local release of drugs which otherwise might find it difficult to reach the insertion/implantation site. The incorporation of the drug enables the tuning of the host/microbial responses to the device and the management of device-related complications. On the other hand, the medical device acts as platform for the delivery of the drug for a prolonged period of time just at the site where it is needed and, consequently, the efficacy and the safety of the treatment, as well as its cost-effectiveness are improved. This chapter begins with an introduction to the combination products and then focuses on the techniques available (compounding, impregnation, coating, grafting of the drug or of polymers that interact with it) to endow medical devices with the ability to host drugs/biological products and to regulate their release. Furthermore, the methods for surface modification with stimuli-responsive polymers or networks are analyzed in detail and the performance of the modified materials as drug-delivery systems is discussed. A wide range of chemical-, irradiation- and plasma-based techniques for grafting of brushes and networks that are sensitive to changes in temperature, pH, light, ionic strength or concentration of certain biomarkers, from a variety of substrate materials, is currently available. Although in vivo tests are still limited, such a surface functionalization of medical devices has already been shown useful for the release on-demand of drugs and biological products, being switchable on/off as a function of the progression of certain physiological or pathological events (e.g. healing, body integration, biofouling or biofilm formation). Improved knowledge of the interactions among the medical device, the functionalized surface, the drug and the body are expected to pave the way to the design of drug-eluting medical devices with optimized and novel performances.

Mechanisms of tissue uptake and retention in zotarolimus-coated balloon therapy

BACKGROUND

Drug-coated balloons are increasingly used for peripheral vascular disease, and, yet, mechanisms of tissue uptake and retention remain poorly characterized. Most systems to date have used paclitaxel, touting its propensity to associate with various excipients that can optimize its transfer and retention. We examined zotarolimus pharmacokinetics.

METHODS AND RESULTS

Animal studies, bench-top experiments, and computational modeling were integrated to quantify arterial distribution after zotarolimus-coated balloon use. Drug diffusivity and binding parameters for use in computational modeling were estimated from the kinetics of zotarolimus uptake into excised porcine femoral artery specimens immersed in radiolabeled drug solutions. Like paclitaxel, zotarolimus exhibited high partitioning into the arterial wall. Exposure of intimal tissue to drug revealed differential distribution patterns, with zotarolimus concentration decreasing with transmural depth as opposed to the multiple peaks displayed by paclitaxel. Drug release kinetics was measured by inflating zotarolimus-coated balloons in whole blood. In vivo drug uptake in swine arteries increased with inflation time but not with balloon size. Simulations coupling transmural diffusion and reversible binding to tissue proteins predicted arterial distribution that correlated with in vivo uptake. Diffusion governed drug distribution soon after balloon expansion, but binding determined drug retention.

CONCLUSIONS

A large bolus of zotarolimus releases during balloon inflation, some of which pervades the tissue, and a fraction of the remaining drug adheres to the tissue-lumen interface. As a result, the duration of delivery modulates tissue uptake where diffusion and reversible binding to tissue proteins determine drug transport and retention, respectively.

Impact of flow pulsatility on arterial drug distribution in stent-based therapy

Drug-eluting stents reside in a dynamic fluid environment where the extent to which drugs are distributed within the arterial wall is critically modulated by the blood flowing through the arterial lumen. Yet several factors associated with the pulsatile nature of blood flow and their impact on arterial drug deposition have not been fully investigated. We employed an integrated framework comprising bench-top and computational models to explore the factors governing the time-varying fluid dynamic environment within the vasculature and their effects on arterial drug distribution patterns. A custom-designed bench-top framework comprising a model of a single drug-eluting stent strut and a poly-vinyl alcohol-based hydrogel as a model tissue bed simulated fluid flow and drug transport under fully apposed strut settings. Bench-top experiments revealed a relative independence between drug distribution and the factors governing pulsatile flow and these findings were validated with the in silico model. Interestingly, computational models simulating suboptimal deployment settings revealed a complex interplay between arterial drug distribution, Womersley number and the extent of malapposition. In particular, for a stent strut offset from the wall, total drug deposition was sensitive to changes in the pulsatile flow environment, with this dependence increasing with greater wall displacement. Our results indicate that factors governing pulsatile luminal flow on arterial drug deposition should be carefully considered in conjunction with device deployment settings for better utilization of drug-eluting stent therapy.

Location-dependent coronary artery diffusive and convective mass transport properties of a lipophilic drug surrogate measured using nonlinear microscopy

PURPOSE

Arterial wall mass transport properties dictate local distribution of biomolecules or locally delivered dugs. Knowing how these properties vary between coronary artery locations could provide insight into how therapy efficacy is altered between arterial locations.

METHODS

We introduced an indocarbocyanine drug surrogate to the lumens of left anterior descending and right coronary (LADC; RC) arteries from pigs with or without a pressure gradient. Interstitial fluorescent intensity was measured on live samples with multiphoton microscopy. We also measured binding to porcine coronary SMCs in monoculture.

RESULTS

Diffusive transport constants peaked in the middle sections of the LADC and RC arteries by 2.09 and 2.04 times, respectively, compared to the proximal and distal segments. There was no statistical difference between the average diffusivity value between LADC and RC arteries. The convection coefficients had an upward trend down each artery, with the RC being higher than the LADC by 3.89 times.

CONCLUSIONS

This study demonstrates that the convective and diffusive transport of lipophilic molecules changes between the LADC and the RC arteries as well as along their length. These results may have important implications in optimizing drug delivery for the treatment of coronary artery disease.

Deformationally dependent fluid transport properties of porcine coronary arteries based on location in the coronary vasculature

OBJECTIVE

Understanding coronary artery mass transport allows researchers to better comprehend how drugs or proteins move through, and deposit into, the arterial wall. Characterizing how the convective component of transport changes based on arterial location could be useful to better understand how molecules distribute in different locations in the coronary vasculature.

METHODS AND RESULTS

We measured the mechanical properties and wall fluid flux transport properties of de-endothelialized (similar to post-stenting or angioplasty) left anterior descending (LADC) and right (RC) porcine coronary arteries along their arterial lengths. Multiphoton microscopy was used to determine microstructural differences. Proximal LADC regions had a higher circumferential stiffness than all other regions. Permeability decreased by 198% in the LADC distal region compared to other LADC regions. The RC artery showed a decrease of 46.9% from the proximal to middle region, and 51.7% from the middle to distal regions. The porosity increased in the intima between pressure states, without differences through the remainder of the arterial thickness.

CONCLUSIONS

We showed that the permeabilities and mechanical properties do vary in the coronary vasculature. With variations in mechanical properties, overexpansion of stents can occur more easily while variations in permeability may lead to altered transport based on location.

Do pharmacokinetics explain persistent restenosis inhibition by a single dose of paclitaxel?

BACKGROUND

The purpose of this study was to investigate the elimination of paclitaxel from the arterial wall after a single short administration with a coated balloon.

METHODS AND RESULTS

Slightly oversized paclitaxel-coated balloons (dose 3 or 9 μg/mm(2)) without or with premounted stents were inflated in nonatherosclerotic coronary arteries of either young domestic pigs or adult Goettingen minipigs. The paclitaxel content of plasma, arterial segments, and residual hearts (without treated arteries) was measured for up to 180 days using high-performance liquid chromatography/ultraviolet detection or mass spectrometry. Angiograms were evaluated for lumen narrowing. The paclitaxel concentration in plasma remained <10 ng/mL. In arteries of domestic pigs and minipigs treated with paclitaxel-coated balloons with premounted stents, 10%±5% or 21%±8% of dose, respectively, was initially detected and decreased to 3.5%±3.1% of dose (domestic pig) by Day 7. Within 6 months it fell with a half-life of 1.9 months to 0.40%±0.35%. After 3 months the concentration in the arterial wall was 17±11 μmol/L. Without a stent, drug transfer to the vessel wall was somewhat reduced and elimination faster. Immediately after treatment up to 26%±4% of dose was detected in the residual whole hearts. It dropped with a half-life of 45 days to 1.5%±0.6% of dose (0.3 μmol/L) within 6 months.

CONCLUSIONS

After a single local administration with coated balloons, paclitaxel stays in the vessel wall of pigs long enough to explain persistent inhibition of neointimal proliferation. The pharmacokinetics of paclitaxel does, however, not exclude other reasons for sustained efficacy such as early blocking of processes initiating excessive and prolonged neointimal proliferation.

Heparanase regulates thrombosis in vascular injury and stent-induced flow disturbance

OBJECTIVES

The purpose of this study was to examine the role of heparanase in controlling thrombosis following vascular injury or endovascular stenting.

BACKGROUND

The use of endovascular stents are a common clinical intervention for the treatment of arteries occluded due to vascular disease. Both heparin and heparan sulfate are known to be potent inhibitors of thrombosis. Heparanase is the major enzyme that degrades heparan sulfate in mammalian cells. This study examined the role of heparanase in controlling thrombosis following vascular injury and stent-induced flow disturbance.

METHODS

This study used mice overexpressing human heparanase and examined the time to thrombosis using a laser-induced arterial thrombosis model in combination with vascular injury. An ex vivo system was used to examine the formation of thrombus to stent-induced flow disturbance.

RESULTS

In the absence of vascular injury, wild type and heparanase overexpressing (HPA Tg) mice had similar times to thrombosis in a laser-induced arterial thrombosis model. However, in the presence of vascular injury, the time to thrombosis was dramatically reduced in HPA Tg mice. An ex vivo system was used to flow blood from wild type and HPA Tg mice over stents and stented arterial segments from both animal types. These studies demonstrate markedly increased thromboses on stents with blood isolated from HPA Tg mice in comparison to blood from wild type animals. We found that blood from HPA Tg animals had markedly increased thrombosis when applied to stented arterial segments from either wild type or HPA Tg mice.

CONCLUSIONS

Taken together, this study's results indicate that heparanase is a powerful mediator of thrombosis in the context of vascular injury and stent-induced flow disturbance.

Drug-eluting coronary stents - focus on improved patient outcomes

The development of stent has been a major advance in the treatment of obstructive coronary artery disease since the introduction of balloon angioplasty. Subsequently, neointimal hyperplasia within the stent leading to in-stent restenosis emerged as a major obstacle in long-term success of percutaneous coronary intervention. Recent introduction of drug-eluting stents is a major breakthrough to tackle this problem. This review article summarizes stent technology, reviews progress of drug-eluting stents and discusses quality of life, patient satisfaction, and acceptability of percutaneous coronary intervention.

Stent-induced coronary artery stenosis characterized by multimodal nonlinear optical microscopy

We demonstrate for the first time the applicability of multimodal nonlinear optical (NLO) microscopy to the interrogation of stented coronary arteries under different diet and stent deployment conditions. Bare metal stents and Taxus drug-eluting stents (DES) were placed in coronary arteries of Ossabaw pigs of control and atherogenic diet groups. Multimodal NLO imaging was performed to inspect changes in arterial structures and compositions after stenting. Sum frequency generation, one of the multimodalities, was used for the quantitative analysis of collagen content in the peristent and in-stent artery segments of both pig groups. Atherogenic diet increased lipid and collagen in peristent segments. In-stent segments showed decreased collagen expression in neointima compared to media. Deployment of DES in atheromatous arteries inhibited collagen expression in the arterial media.

Paclitaxel-induced arterial wall toxicity and inflammation: tissue uptake in various dose densities in a minipig model

PURPOSE

Paclitaxel is an antiproliferative agent in drug-eluting stents with largely unknown tissue interaction. Toxicity might result from overdosage and/or accumulation. Part 1 of this two-step study investigated how paclitaxel uptake depends on dose density, coronary drug transfer kinetics, and elution efficacy.

MATERIALS AND METHODS

With cobalt chromium stents and Polyzene-F nanoscale coating, low, intermediate, and high paclitaxel dose densities (25 microg, 50 microg, and 150 microg per stent) were investigated in porcine right coronary arteries (RCAs). Coronary and myocardial tissue concentration measurements and determination of on-stent paclitaxel and plasma concentrations were performed at 2, 8, 24, and 72 hours.

RESULTS

For all stents, uptake was similar at all time intervals (paclitaxel RCA concentration range, 1,610-33,300 ng). Low- and intermediate-dose stents showed similar RCA concentrations, but those for high-dose stents were three times greater. Residual on-stent paclitaxel concentration was not time-dependent, at 33.3% on low-, 30.6% on intermediate-, and 17.4% on high-dose stents. Paclitaxel was measurable in only the plasma immediately after stent placement, with a linear dose relationship and a timely regression: measurements in high-dose stents were 0.0454-0.656 ng/mL at 1 minute and 0.0329-0.0879 ng/mL at 5 minutes. Untreated control samples of the left coronary artery showed a linear dose-dependent concentration (12.6 ng/g, 21.2 ng/g, and 85.2 ng/g).

CONCLUSIONS

Overall coronary paclitaxel uptake is fairly independent from the baseline overall dose density and, hence, depends on immediate binding mechanisms of the arterial wall. This is supported by the fact that, regardless of the applied dose density, the kinetics of paclitaxel uptake did not follow an exposure time pattern.

The effects of vinblastine on smooth muscle cells in vitro: evaluation of a therapeutic window for the treatment of restenosis

The development of drug-eluting stents (DES) to combat the problem of in-stent restenosis has revolutionized interventional cardiology. However, concerns have emerged about the risk of late angiographic stent thromboses associated with DES. The evaluation and width of the therapeutic window of a particular DES system is of huge importance to its safety and efficacy. In this study, the effects of vinblastine, an antimitotic drug, on smooth muscle cells in vitro is analyzed. The change in levels of proliferation, activity, migration, and viability in human coronary artery smooth muscle cells was measured at a range of concentrations and over a number of time points. These findings were then compared with those of a previous study on the effects of vinblastine on endothelial cells, and an optimum working concentration range was evaluated. This study suggests that the concentration of vinblastine most appropriate in restenosis treatment would be between 0.1 and 1 nM. At this concentration, vinblastine exerts a distinct effect on smooth muscle cell proliferation without detrimental effects on endothelial cell viability. It was also found that vinblastine affects certain cellular activities such as migration in a threshold-independent manner, suggesting that very low doses could be active against the processes of restenosis.

Role of in vitro release models in formulation development and quality control of parenteral depots

This review article provides an assessment of advantages/limitations of the use of current in vitro release models to predict in vivo performance of parenteral sustained release products (injectable depots). As highlighted, key characteristics influencing the in vivo drug fate may vary with the route of administration and the type of sustained release formulation. To this end, an account is given on three representative injection sites (intramuscular, subcutaneous and intra-articular) as well as on in vitro release mechanism(s) of drugs from five commonly investigated depot principles (suspensions, microspheres, hydrogels, lipophilic solutions, and liposomes/other nano-size formulations). Current in vitro release models are, to a different extent, able to mimic the rate, transport and equilibrium processes that the drug substance may experience in the environment of the administration site. Their utility for the purpose of quality control including in vitro-in vivo correlations and formulation design is discussed.

Luminal flow amplifies stent-based drug deposition in arterial bifurcations

BACKGROUND

Treatment of arterial bifurcation lesions using drug-eluting stents (DES) is now common clinical practice and yet the mechanisms governing drug distribution in these complex morphologies are incompletely understood. It is still not evident how to efficiently determine the efficacy of local drug delivery and quantify zones of excessive drug that are harbingers of vascular toxicity and thrombosis, and areas of depletion that are associated with tissue overgrowth and luminal re-narrowing.

METHODS AND RESULTS

We constructed two-phase computational models of stent-deployed arterial bifurcations simulating blood flow and drug transport to investigate the factors modulating drug distribution when the main-branch (MB) was treated using a DES. Simulations predicted extensive flow-mediated drug delivery in bifurcated vascular beds where the drug distribution patterns are heterogeneous and sensitive to relative stent position and luminal flow. A single DES in the MB coupled with large retrograde luminal flow on the lateral wall of the side-branch (SB) can provide drug deposition on the SB lumen-wall interface, except when the MB stent is downstream of the SB flow divider. In an even more dramatic fashion, the presence of the SB affects drug distribution in the stented MB. Here fluid mechanic effects play an even greater role than in the SB especially when the DES is across and downstream to the flow divider and in a manner dependent upon the Reynolds number.

CONCLUSIONS

The flow effects on drug deposition and subsequent uptake from endovascular DES are amplified in bifurcation lesions. When only one branch is stented, a complex interplay occurs - drug deposition in the stented MB is altered by the flow divider imposed by the SB and in the SB by the presence of a DES in the MB. The use of DES in arterial bifurcations requires a complex calculus that balances vascular and stent geometry as well as luminal flow.

Funneling: enhancing results of small-vessel stenting

Until October 2008, coronary drug-eluting stents with a diameter of < or =2.5 mm were not approved by the FDA. Target vessels of < or =2 mm in diameter pose a major challenge in view of high restenosis rates when stented bare metal stents (BMS) are used and distal edge dissection when oversized stents are deployed. Described is a method ("funneling") to optimize stenting of small vessels. This strategy combines stenting the distal part of the lesion with short (8-12 mm length) 2-mm bare metal stent while stenting with a larger-diameter (> or =2.5 mm) drug-eluting stent (DES) with considerable DES-BMS overlap (leaving only the distal 4-6 mm of the BMS not overlapped by a DES). The two stents create a funnel that is for the most part drug eluting. With funneling, both drug elution and larger diameter are attained, minimizing both edge dissection and restenosis.

Advances in stent drug delivery: the future is in bioabsorbable stents

This expert opinion review offers a perspective on the future developments in drug-eluting stent design. Initial efforts were focused on reduction of in-stent restenosis, which the drug-eluting stents addressed effectively. Current concerns are predominantly with regard to risk of stent thrombosis and delayed endothelialization. All three components of the stent have been modified to achieve the goal of endothelialization and vessel healing: drug, polymer and the platform. We review different approaches to reduce this risk from design of different drug combinations, through less traumatic metallic stent platforms, via biodegradable polymers and, finally, fully biodegradable stents. It seems at this time that fully biodegradable solutions to stenting hold the greatest promise, but larger long-term studies are needed to evaluate fully their safety and efficacy in 'all-comer' patient populations. At the time of this review, design of a safe drug-eluting stent still remains a challenge.

Luminal flow patterns dictate arterial drug deposition in stent-based delivery

Endovascular stents reside in a dynamic flow environment and yet the impact of flow on arterial drug deposition after stent-based delivery is only now emerging. We employed computational fluid dynamic modeling tools to investigate the influence of luminal flow patterns on arterial drug deposition and distribution. Flow imposes recirculation zones distal and proximal to the stent strut that extend the coverage of tissue absorption of eluted drug and induce asymmetry in tissue drug distribution. Our analysis now explains how the disparity in sizes of the two recirculation zones and the asymmetry in drug distribution are determined by a complex interplay of local flow and strut geometry. When temporal periodicity was introduced as a model of pulsatile flow, the net luminal flow served as an index of flow-mediated spatio-temporal tissue drug uptake. Dynamically changing luminal flow patterns are intrinsic to the coronary arterial tree. Coronary drug-eluting stents should be appropriately considered where luminal flow, strut design and pulsatility have direct effects on tissue drug uptake after local delivery.

In-vitro assays of polymer-coated stents eluting platelet glycoprotein IIb/IIIa receptor monoclonal antibody

The monoclonal antibody (mAb) to the platelet glycoprotein (GP) IIb/IIIa receptor has potent antiplatelet and antithrombotic characteristics shown to reduce thrombus-related major complications after coronary angioplasty. This mAb can be incorporated in drug-eluting stents capable of releasing single or multiple bioactive agents into the bloodstream and surrounding tissues. Stents eluting the monoclonal mouse anti-human platelet glycoprotein IIb/IIIa antibody SZ-262 were tested for their effectiveness in improving the blood compatibility and the antithrombotic characteristics by immunofluorescence and scanning electron microscopy (SEM). The SEM results convincingly demonstrated that the surface of the mAb eluting-stents was completely free of platelet uptake without any sign of cellular debris or proteinaceous deposits, compared with controls. The deformation index of platelets on the L-polylactic acid (L-PLA) coated stents were higher than bare Nitinol intravascular stents, as shown by SEM images. Monoclonal antibody to the platelet GP IIb/IIIa receptor, when eluting from L-PLA polymer-coated stents, effectively inhibits platelet aggregation in the stent microenvironment, thus demonstrating a potential capacity of reducing thrombosis, improving blood flow and arterial patency rates, and inhibiting cyclic blood flow variations. These results highlight the possibility of such monoclonal antibody-eluting stents to reduce or possibly eliminate thrombosis and in-stent restenosis.

Effects of Diffusion Coefficients and Struts Apposition Using Numerical Simulations for Drug Eluting Coronary Stents

In the context of drug eluting stent, we present two-dimensional numerical models of mass transport of the drug in the wall and in the lumen to study the effect of the drug diffusion coefficients in the three principal media (blood, vascular wall, and polymer coating treated as a three-compartment problem) and the impact of different strut apposition configurations (fully embedded, half embedded, and not embedded). The different conditions were analyzed in terms of their consequence on the drug concentration distribution in the arterial wall. We apply the concept of the therapeutic window to the targeted vascular wall region and derive simple metrics to assess the efficiency of the various stent configurations. Although most of the drug is dispersed in the lumen, variations in the blood flow rate within the physiological range of coronary blood flow and the diffusivity of the drug molecule in the blood were shown to have a negligible effect on the amount of drug in the wall. Our results reveal that the amount of drug cumulated in the wall depends essentially on the relative values of the diffusion coefficients in the polymer coating and in the wall. Concerning the strut apposition, it is shown that the fully embedded strut configuration would provide a better concentration distribution.

Coronary stents: a materials perspective

The objective of this review is to describe the suitability of different biomaterials as coronary stents. This review focuses on the following topics: (1) different materials used for stents, (2) surface characteristics that influence stent-biology interactions, (3) the use of polymers in stents, and (4) drug-eluting stents, especially those that are commercially available.

Structural and Drug Diffusion Models of Conventional and Auxetic Drug-Eluting Stents

Most balloon angioplasty procedures include the insertion of tiny cylindrical wire mesh structures, called cardiovascular stents, into the artery to prevent the elastic recoil that follows arterial dilatation. The scaffolding characteristics of the stent provide strength to the artery wall. However, vascular injury during stent deployment and∕or recognition of the stent as a foreign material triggers neointimal hyperplasia, causing re-closure, or restenosis, of the artery. A recent advancement to counteract restenosis is to employ drug-eluting stents to locally deliver immunosuppressant and antiproliferative drugs. In this project, Fick’s law of diffusion was used to model drug diffusion from the stent matrix into the adjacent arterial tissue. An analytical procedure was also developed to estimate the circumferential and the flexural stiffnesses of stents. Furthermore, a unique auxetic (negative Poisson’s ratio) stent structure was proposed that exhibits high circumferential strength in its expanded configuration and low flexural rigidity in its crimped configuration. Results generated with the analytical diffusion model, developed in this project, compare favorably with previously published clinical and experimental data. The circumferential and flexural stiffnesses estimated using the analytical procedure developed in this project compare favorably with the results from rigorous finite element analyses and previously published experimental data.

Drug-eluting stents: factors governing local pharmacokinetics

Stent-based drug delivery system is a revolutionary approach to mitigate the negative affects of balloon angioplasty, improve immune responsiveness and prevent hyperplastic growth of smooth muscle in the restenotic state. Its success is therefore empirically associated with effective delivery of potent therapeutics to the target site at a therapeutic concentration, for a sufficient time, and in a biologically active form. However, local delivery with drug-eluting stents imparts large dynamic concentration gradients across tissues that can be difficult to identify, characterize and control. This review explores the factors such as physiological transport forces, drug physicochemical properties, local biological tissue properties and stent design that governs the local pharmacokinetics within the arterial wall by drug-eluting stent. Rational design and optimization of drug-eluting stents for local delivery thus requires a careful consideration of all these factors.

Mechanisms of controlled drug release from drug-eluting stents

The clinical importance of drug-eluting stents (DESs) has been demonstrated by their unparalleled success in preventing restenosis after stenting procedures. The magnitude of success is historic despite their short history. The current DESs deliver a single drug aiming to prevent or minimize proliferation of smooth muscle cells. Since the restenosis process involves several different biological responses, the ability to deliver the right drugs at the right times is critical for further development of the second generation of DESs. As the type of drugs that can be delivered from DESs varies, it is imperative to understand the drug delivery mechanisms and the approaches available for drug coating on the stents. The drug delivery mechanisms of current DESs that have been used clinically and under clinical trials are explained.

The Taxus drug-eluting stent: a new paradigm in controlled drug delivery

The advent of drug-eluting stents (DES) has provided the medical community with a technology that is transforming the treatment of coronary artery disease. As the newest treatment modality available to the interventional cardiologist, drug-eluting stents have not only significantly reduced the risk of restenosis, but they are also allowing the interventionalists to treat more complex lesions in patients that would otherwise require more invasive bypass surgery. Development of these drug-device combination products has presented considerable challenges to the device industry because it involves a multi-disciplinary approach that combines conventional device design and manufacturing with the principles of controlled local drug delivery. This review article provides an in-depth discussion of the key elements of drug-eluting stents, focusing on the TAXUS paclitaxel-eluting stent as an example of this new class of product. Specific sections will review the drug and polymer matrix components, formulation development and evaluation, pre-clinical studies and clinical trial results.