Characterization of sorption sites and differential stress response of microalgae isolates against tannery effluents from ranipet industrial area-An application towards phycoremediation

Dielectrophoresis-assisted removal of Cd and Cu heavy metal ions by using Chlorella microalgae

A novel dielectrophoresis (DEP)-assisted device for the bioremediation of heavy metal ions by using Chlorella microalgae is presented in this paper. To generate the DEP forces, pairs of electrode mesh were inserted in the DEP-assisted device. By applying DC electric field via the electrodes, the inhomogeneous electric field gradient is induced and the strongest non-uniform electric field exists near the mesh cross-corner. After the adsorption of Cd and Cu heavy metal ions by Chlorella, the Chlorella chain were trapped along the vicinity of the electrode mesh. Then, the effects of Chlorella concentration on the adsorption of heavy metal ions, and the applied voltage and electrode mesh size on the removal of Chlorella are conducted. In the co-existing Cd and Cu solutions, the individual adsorption ratio of Cd and Cu reaches as high as approximately 96% and 98%, respectively, showing excellent bioremediation capability of multiple heavy metal ions in wastewater. By adjusting the applied electric voltage and the mesh size, the Chlorella adsorbed with Cd and Cu are captured by negative DC-DEP effects and the removal ratio of Chlorella reach an average of 97%, providing a method for the removal of multiple heavy metal ions in wastewater by using Chlorella microalgae.

Toxicity mechanisms and remediation strategies for chromium exposure in the environment

Chromium (Cr) is the seventh most abundant chemical element in the Earth’s crust, and Cr(III) and Cr(VI) are common stable valence states of Cr. Several Cr-containing substances, such as FeOCr2O3 and stainless-steel products, exist in nature and in life. However, Cr(VI) is toxic to soil, microorganisms, and plants and poses a serious threat to human health through direct and indirect exposure. By collecting published journal literature, we found that Cr(VI) can cause acute and chronic toxicity in organisms and has carcinogenic effects, and the mechanisms causing these toxicity include endoplasmic reticulum stress, autophagy and apoptosis. However, the relationship between these mechanisms remains unclear. Many methods have been researched to purify chromium, but each of these methods has its own advantages and disadvantages. Therefore, this review summarizes the hazards of chromium and the mechanisms of chromium toxicity after entering cells and provides a number of methods for chromium contamination management, providing a direction for the next step in chromium toxicology and contamination decontamination research.

Review on rewiring of microalgal strategies for the heavy metal remediation - A metal specific logistics and tactics

Phycoremediation of heavy metals are gaining much attention and becoming an emerging practice for the metal removal in diverse environmental matrices. Still, the physicochemical state of metal polluted sites is often found to be complex and haphazard in nature due to the irregular discharge of wastes, that leads to the lack of conjecture on the application of microalgae for the metal bioremediation. Besides, the foresaid issues might be eventually ended up with futile effect to the polluted site. Therefore, this review is mainly focusing on interpretative assessment on pre-existing microalgal strategies and their merits and demerits for selected metal removal by microalgae through various process such as natural attenuation, nutritional amendment, chemical pretreatment, metal specific modification, immobilization and amalgamation, customization of genetic elements and integrative remediation approaches. Thus, this review provides the ideal knowledge for choosing an efficient metal remediation tactics based on the state of polluted environment. Also, this in-depth description would provide the speculative knowledge of counteractive action required for pass-over the barriers and obstacles during implementation. In addition, the most common metal removal mechanism of microalgae by adsorption was comparatively investigated with different metals through the principal component analysis by grouping various factor such as pH, temperature, initial metal concentration, adsorption capacity, removal efficiency, contact time in different microalgae. Conclusively, the suitable strategies for different heavy metals removal and addressing the complications along with their solution is comprehensively deliberated for metal removal mechanism in microalgae.

DC-Dielectrophoretic Manipulation and Isolation of Microplastic Particle-Treated Microalgae Cells in Asymmetric-Orifice-Based Microfluidic Chip

A novel direct-current dielectrophoretic (DC-DEP) method is proposed for the manipulation and isolation of microplastic particle (MP)-treated microalgae cells according to their dielectric properties in a microfluidic chip. The lateral migration and trajectory of the microalgae cells were investigated. To induce stronger DC-DEP effects, a non-homogeneous electric-field gradient was generated by applying the DC electric voltages through triple pairs of asymmetric orifices with three small orifices and one large orifice located on the opposite microchannel wall across the whole channel, leading to the enhanced magnitude of the non-uniform electric-field gradient and effective dielectrophoretic area. The effects of the applied voltage, the polystyrene (PS) adsorption coverage, and thickness on the DC-DEP behaviors and migration were numerically investigated, and it was found that the effect of the PS adsorption thickness of the Chlorella cells on the DC-DEP behaviors can be neglected, but the effect on their trajectory shifts cannot. In this way, the separation of 3 µm and 6 µm Chlorella coated with 100% PS particles and the isolation of the Chlorella cells from those coated with various coverages and thicknesses of PS particles was successfully achieved, providing a promising method for the isolation of microalgae cells and the removal of undesired cells from a target suspension.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Novel strategies and advancement in reducing heavy metals from the contaminated environment

The most contemporary ecological issues are the dumping of unprocessed factories' effluent. As a result, there is an increasing demand for creative, practical, environmentally acceptable, and inexpensive methodologies to remediate inorganic metals (Hg, Cr, Pb, and Cd) liquidated into the atmosphere, protecting ecosystems. Latest innovations in biological metals have driven natural treatment as a viable substitute for traditional approaches in this area. To eliminate pesticide remains from soil/water sites, technologies such as oxidation, burning, adsorption, and microbial degradation have been established. Bioremediation is a more cost-effective and ecologically responsible means of removing heavy metals than conventional alternatives. As a result, microorganisms have emerged as a necessary component of methyl breakdown and detoxification via metabolic reactions and hereditary characteristics. The utmost operative variant for confiscating substantial metals commencing contaminated soil was A. niger, which had a maximum bioaccumulation efficiency of 98% (Cd) and 43% (Cr). Biosensor bacteria are both environmentally sustainable and cost-effective. As a result, microbes have a range of metal absorption processes that allow them to have higher metal biosorption capabilities. Additionally, the biosorption potential of bacterium, fungus, biofilm, and algae, inherently handled microorganisms that immobilized microbial cells for the elimination of heavy metals, was reviewed in this study. Furthermore, we discuss some of the challenges and opportunities associated with producing effective heavy metal removal techniques, such as those that employ different types of nanoparticles.

The responses of Scrippsiella acuminata to the stresses of darkness: antioxidant activities and formation of pellicle cysts

In order to understand the strategy of Scrippsiella acuminata to cold dark environment, the antioxidant responses and the formation of pellicle cysts of S. acuminata to darkness at 8°C and 20°C were investigated. Cell densities decreased significantly after 96 h dark treatment, and no live cells were observed after 9-days dark treatments. The darkness stress generally resulted in an increase of antioxidant defenses, including soluble protein, superoxide dismutase (SOD), glutathione (GSH), and malondialdehyde (MDA). Cellular soluble protein and SOD activity increased sharply under 20°C darkness, which protected algal cells against the oxidative stress from darkness, and resulted in relatively lower MDA levels. Soluble protein and SOD activity were enhanced under 8°C darkness as well however not in a sharp rise, and higher levels of MDA and GSH were recorded. The results suggested high SOD and protein levels protected cells against harsh darkness stress, while high GSH not only helped algae cells resist dark stress, but also played an important role in low temperature stress. Darkness promoted the formation of pellicle cysts of S. acuminata, and the maximum formation rates were 16.06% to 21.74% at 8°C and 20°C, respectively. Germination of pellicle cysts occurred within 24 h after light exposure, however pellicle cysts could not withstand long-time darkness stress, and all pellicle cysts died after 9-days darkness exposure. The results of this study suggest that S. acuminata is able to overcome temporary cold darkness through forming pellicle cysts.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Emerging role of microalgae in heavy metal bioremediation

Microalgae have been publicized for their diversified dominance responsiveness and bioaccumulation potential toward pollutants in an ecosystem. Also, algal's incredible capability as biocatalysts in environmental appliances has been well elucidated owing to their robustness and simple nutritional demand. Additionally, microalgae can deliver various collections of bio-based chemical compounds helpful for diversified applications, especially as green alternatives. The environment has been contaminated with various polluting agents; one principal polluting agent is heavy metals which are carcinogenic and show toxicity even in minimal quantity, cause unsatisfactory threats to the environmental ecosystem, including human and animal health. There is a prominent tendency to apply microalgae in the phytoremediation of heavy metals compounds because of its vast benefits, including great accessibility, cost-effective, excellent toxic metal eliminating efficiency, and nontoxic to the ecosystem. This review uncovers the most recent advancements and mechanisms associated with the bioremediation process and biosorption interaction of substantial harmful synthetic compounds processing microalgae species. Furthermore, future challenges and prospects in the utilization of microalgae in heavy metals bioremediation are also explored. The current review aims to give valuable information to aid the advancement of robust and proficient future microalgae-based heavy metal bioremediation innovations and summarizing a wide range of benefits socioeconomic scope to be employed in heavy metal compound removal in environment system.

Bioremediation of ossein effluents using the filamentous marine cyanobacterium Cylindrospermum stagnale

Wastewater containg proteinaceous ossein effluents are problematic to be treated. We studied the possibility to treat ossein effluents with the marine cyanobacterium strain Cylindrospermum stagnale. After optimizing the culture conditions of the bacterium, three different types of ossein effluents were tested: dicalcium phosphate (DCP), high total dissolved solids (HTDS) and low total dissolved (LTDS). The effluents were diluted with sea water at the following ratios 1:1, 2:1 and 3:2. The optimum operating conditions were at 3000 lux light intensity and 37 °C temperature. The highest degradation of ossein effluens by C. stagnale was attained for a dilution ratio of 1:1. However, less diluted ossein effluents reduced the growth of C. stagnale drastically. The degradation was shown by measuring the chlorophyll a content and the dry weight of bacterial cells during a seven-day incubation period degradation. Fourier Transform Infrared Spectroscopy (FT-IR) analysis verified the degradation showing the presence of the degradation products of ossein (i.e. calcium carbonate and calcite) in the culture medium. Lipid composition in fatty acids appeared to be suitable for biofuel production. The results showed that the marine cyanobacterium C. stagnale can be used to treat ossein effluents, and at the same time, to produce biofuel in a sustainable way.

Bioremediation of heavy metals using microalgae: Recent advances and mechanisms

Five heavy metals namely, arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb) and mercury (Hg) are carcinogenic and show toxicity even at trace amounts, posing threats to environmental ecology and human health. There is an emerging trend of employing microalgae in phycoremediation of heavy metals, due to several benefits including abundant availability, inexpensive, excellent metal removal efficiency and eco-friendly nature. This review presents the recent advances and mechanisms involved in bioremediation and biosorption of these toxic heavy metals utilizing microalgae. Tolerance and response of different microalgae strains to heavy metals and their bioaccumulation capability with value-added by-products formation as well as utilization of non-living biomass as biosorbents are discussed. Furthermore, challenges and future prospects in bioremediation of heavy metals by microalgae are also explored. This review aims to provide useful insights to help future development of efficient and commercially viable technology for microalgae-based heavy metal bioremediation.

Phycoremediation potential of microalgae species for ethidium bromide removal from aqueous media

Ethidium Bromide (EtBr) is an organic compound used in molecular biology investigations. EtBr ability of intercalating in the DNA molecule makes it a toxic substance. The objective was to evaluate the phycoremediation potentials of Chlorella vulgaris, Desmodesmus subspicatus and Raphidocelis subcapitata tested separately and in a mixture (Mix) for EtBr removal from the aqueous medium. Experiments were conducted using an initial algae biomass of 10⁶ cell/mL, exposed to 500 µg/L of EtBr. The removal efficiency (µg EtBr L^-1) after 3 h in each treatment were: Mix (72.8 µg.L^-1) >D. subspicatus (48.4 µg.L^-1) >R. subcapitata (24.6 µg.L^-1) >C. vulgaris (19.9 µg.L^-1). However, when EtBr mass reduction per microalgae density is considered (ng.algae^-1), the efficiency ranking changes to: D. subspicatus (1.9 × 10^-5ng.algae^-1) >C. vulgaris (1.4 × 10^-5ng.algae^-1) >Mix (9.8 × 10^-6ng.algae^-1) >R. subcapitata (2.8 × 10^-6ng.algae^-1). The results suggest that initial algal population density is a determinant factor for efficient EtBr removal by microalgae species in short term treatments. In order to obtain 100% of EtBr removal, it should be necessary 10¹⁰, 10¹⁰ and 10¹¹ algae.mL^-1 of C. vulgaris, D. subspicatus and R. subcapitata, respectively. The results strongly suggest phycoremediation can be explored as an alternative method for EtBr removal.

Sequential role of biosorption and biodegradation in rapid removal degradation and utilization of methyl parathion as a phosphate source by a new cyanobacterial isolate Scytonema sp. BHUS-5

A new isolate of genus Scytonema distinct from its closest relative cyanobacterium, Scytonema hofmanni was found efficient in the removal and degradation of organophosphorus (OP) pesticide, methyl parathion (MP). The cyanobacterial isolate was also capable of utilizing the phosphorus present in the MP following its degradation, which was evident from the increase in growth (chlorophyll content), biomass, protein content, and total phosphorus in comparison to cyanobacterium grown in phosphate-deficient cultures. The rapid removal of MP by the cyanobacterium during initial 6 hours of incubation was defined by the pseudo-second-order biosorption kinetics model, which indicated the involvement of chemosorption in initial removal of pesticide. Further, degradation of MP was also confirmed by the appearance of p-nitrophenol in the medium after 24 hours of incubation. Thus, the cyanobacterial isolate of Scytonema sp. BHUS-5 seems to be a potential bioremediation agent for the removal of OP pesticide, MP from the habitat.