Lead phytoextraction from printed circuit computer boards by Lolium perenne L. and Medicago sativa L

Lead tolerance and accumulation characteristics of Cubana Kordes rose in lead-contaminated soil

This study was conducted to determine lead tolerance and accumulation characteristics of Cubana Kordes rose, which is used in landscaping studies in areas with heavy traffic. In the study, 0%, 3%, and 6% leonardite was added to the sand growing medium, and Pb was applied at different doses (0, 200, 400, 800, and 1600 mg Pb kg^-1). At the end of the experiment, the effect of Pb application on plant physiological properties was not statistically significant. The Pb concentration of flower and stem was between 4.50 and 8.92 mg kg^-1 and 8.47 and 543.25 mg kg^-1, respectively. The Pb concentration in the stem increased with an increase in the dose of Pb. The Pb concentration in the root was between 4.00 and 50.35 mg kg^-1 and increased with an increase in the dose of Pb (p < 0.05). The available Pb concentration in the soil varied between 0.05 and 448.79 mg kg^-1. The transfer factor value varied between 1.84 and 18.73 and the bioaccumulation factor value ranged between 0.00 and 10.46. The amount of Pb removed from the soil by the stem was between 124.7 and 8346.6 µg kg^-1. From the results, we determined that Pb accumulated at a higher rate in the stem than in the root and the flower of Cubana Kordes roses. We found that these roses could tolerate the accumulation of Pb, and hence, they have a great potential to be used in the remediation of soil contaminated by Pb.

Microorganisms and Plants in the Recovery of Metals from the Printed Circuit Boards of Computers and Cell Phones: A Mini Review

Most electrical and electronic equipment contain a printed circuit board (PCB), which is the board on which microelectronic components are mounted. The PCBs of obsolete and discarded electrical and electronic equipment are a material of great value due to their high metal content that is of commercial importance (i.e., Au, Ag, Pd, Pt, Ir, Ti, Ge, Si, Al, Cu, Ni, Zn, Fe, Sn, As, and Pb). Hydrometallurgical and pyrometallurgical methods have been used to extract metals from PCBs; however, these methods have energy and environmental disadvantages, which is why in recent years sustainable alternatives have been sought. Among these alternatives are the biological methods that contemplate the use of microorganisms and plants to recover metals from PCBs. In this review, only studies specifying the use of bacteria, fungi, and plants in the recovery of metals from the PCBs of computers and cell phones were considered, since the metallic composition of these plates varies according to the electronic equipment. In addition, the challenges and recommendations for these biotechnological processes to be improved and implemented at the industrial level in the coming years are discussed.

Phytoremediation of Cd and Pb interactive polluted soils by switchgrass (Panicum virgatum L.)

Using phytoremediation as an efficient technique to remove heavy metals from contaminated soils is a current research hotspot. This study used an orthogonal matrix experimental design with three factors (Cd, Pb, and pH) and five levels (Cd at 9.45, 30, 60, 90, and 110.46 µg/g; Pb at 195.4, 400, 700, 1000, and 1204.6 µg/g; and pH at 3, 4.1, 5.8, 7.5, and 8.6) to investigate the phytoremediation potential of Panicum virgatum L. for soils polluted with cadmium (Cd) and lead (Pb). The results indicated that there was a significant decrease in belowground biomass in plants exposed to the stresses compared to the control. Superoxide dismutase (SOD) activity, peroxidase (POD) activity, and malondialdehyde (MDA) content were affected. Interaction of Cd with Pb in the soil had an antagonistic effect on the Cd bioaccumulation factor, whereas the interaction of pH with Cd or Pb had synergistic effects on the Cd bioaccumulation factor. When exposed to the three stressors, switchgrass plants could grow in soil that had a Cd concentration of a 46.68 µg/g, Pb concentration of 568.75 µg/g and pH of 5.34, which is a mildly acidic condition. Switchgrass, used as a phytoremediation plant, was more efficient in Cd-contaminated than in Pb-contaminated soil.

Synergistic plant-microbes interactions in the rhizosphere: a potential headway for the remediation of hydrocarbon polluted soils

Soil pollution is an unavoidable evil; many crude-oil exploring communities have been identified to be the most ecologically impacted regions around the world due to hydrocarbon pollution and their concurrent health risks. Several clean-up technologies have been reported on the removal of hydrocarbons in polluted soils but most of them are either very expensive, require the integration of advanced mechanization and/or cannot be implemented in small scale. However, "Bioremediation" has been reported as an efficient, cost-effective and environment-friendly technology for clean-up of hydrocarbon"s contaminated soils. Here, we suggest the implementation of synergistic mechanism of bioremediation such as the use of rhizosphere mechanism which involves the actions of plant and microorganisms, which involves the exploitation of plant and microorganisms for effective and speedy remediation of hydrocarbon"s contaminated soils. In this mechanism, plant"s action is synergized with the soil microorganisms through the root rhizosphere to promote soil remediation. The microorganisms benefit from the root metabolites (exudates) and the plant in turn benefits from the microbial recycling/solubilizing of mineral nutrients. Harnessing the abilities of plants and microorganisms is a potential headway for cost-effective clean-up of hydrocarbon"s polluted sites; such technology could be very important in countries with great oil producing activities/records over many years but still developing.