Synthesis and Applications of Functionalized Magnetic Nanomaterials in Enantioseparation

Dual emission chiral carbon dots as fluorescent probe for fast chiral recognition of tryptophan enantiomers

BACKGROUND

Chirality is an essential property of nature. Chiral recognition is of great significance to life sciences, pharmaceutical industry, food analysis, and so on. Chiral carbon dots (CCDs), as green nanomaterials, have great prospects in chiral sensing. However, CCDs with enantioselectivity for tryptophan (Trp) enantiomers are scarce. Moreover, most chiral sensing platforms depend on the difference of fluorescence intensity at the same emission wavelength to identify enantiomers, it is still a challenge to distinguish enantiomers by the positions of fluorescent emission peaks.

RESULTS

Novel CCDs with specific chiral recognition ability for Trp enantiomers are synthesized using l-lysine and l-cysteine as precursors. The CCDs have two fluorescent emission peaks at 390 nm and 450 nm. Interestingly, the fluorescence intensity of CCDs at 390 nm enhances obviously on the addition of L-Trp, while it enhances slightly at 450 nm in the presence of D-Trp. This chiral sensing system not only can identify Trp enantiomers according to fluorescence intensity, but also achieves the distinguishment depending on emission wavelength. The enantioselectivity (IL/ID) reaches 4.5 when the concentration of Trp enantiomer is 1 mM. This chiral sensing platform not only can be used for quantitative analysis of D-Trp and L-Trp, but also can be used for determining the enantiomeric excess of racemates. The chiral recognition mechanism is investigated by molecular simulation. It is found that L-Trp has higher binding energy with CCDs.

SIGNIFICANCE

This work presents a novel kind of CCDs with special chiral recognition performance for Trp enantiomers, and opens the door to identify chiral isomers according to wavelength difference, which has profound significance for the development of chiral sensing platforms, and may provide inspirations for the design of novel CCDs with excellent chiral recognition performance.

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Surface modified nanoparticles and their applications for enantioselective detection, analysis, and separation of various chiral compounds

The development of efficient enantioselective detection, analysis, and separation relies significantly on molecular interaction. In the scale of molecular interaction, nanomaterials have a significant influence on the performance of enantioselective recognitions. The use of nanomaterials for enantioselective recognition involved synthesizing new materials and immobilization techniques to produce various surface-modified nanoparticles that are either encapsulated or attached to surfaces, as well as layers and coatings. The combination of surface-modified nanomaterials and chiral selectors can improve enantioselective recognition. This review aims to offer engagement insights into the production and application of surface-modified nanomaterials to achieve sensitive and selective detection, better chiral analysis, and separation of numerous chiral compounds.

Enantioseparation/Recognition based on nano techniques/materials

Enantiomers show different behaviors in interaction with the chiral environment. Due to their identical chemical structure and their wide application in various industries, such as agriculture, medicine, pesticide, food, and so forth, their separation is of great importance. Today, the term "nano" is frequently encountered in all fields. Technology and measuring devices are moving towards miniaturization, and the usage of nanomaterials in all sectors is expanding substantially. Given that scientists have recently attempted to apply miniaturized techniques known as nano-liquid chromatography/capillary-liquid chromatography, which were originally accomplished in 1988, as well as the widespread usage of nanomaterials for chiral resolution (back in 1989), this comprehensive study was developed. Searching the terms "nano" and "enantiomer separation" on scientific websites such as Scopus, Google Scholar, and Web of Science yields articles that either use miniaturized instruments or apply nanomaterials as chiral selectors with a variety of chemical and electrochemical detection techniques, which are discussed in this article.

Research and Application of Highly Selective Molecular Imprinting Technology in Chiral Separation Analysis

Since residual chiral pollutants in the environment and toxic or ineffective chiral components in drugs can threat human health, there is an urgent need for methods to separation and analyze chiral molecules. Molecular imprinting technology (MIT) is a biomimetic technique for specific recognition of analytes with high potential for application in the field of chiral separation and analysis. However, since MIT has some disadvantages when used for chiral recognition, such as poor rigidity of imprinted materials, a single type of recognition site, and poor stereoselectivity, reducing the interference of conformationally and structurally similar substances to increase the efficiency of chiral recognition is difficult. Therefore, improving the rigidity of imprinted materials, increasing the types of imprinted cavity recognition sites, and constructing an imprinted microenvironment for highly selective chiral recognition are necessary for the accurate identification of chiral substances. In this article, the principle of chiral imprinting recognition is introduced, and various strategies that improve the selectivity of chiral imprinting, using derivative functional monomers, supramolecular compounds, chiral assembly materials, and biomolecules, are reviewed in the past 10 years.

Application of nanoparticles in chiral analysis and chiral separation

Chiral molecules in relation to particular biological roles are stereoselective. Enantiomers differ significantly in their biochemical responses in biological environment. Despite the current advancement in drug discovery and pharmaceutical biotechnology, the chiral separation of some racemic mixtures continues to be one of the greatest challenges, because the available techniques are too costly and time consuming for the assessment of therapeutic drugs in the early stages of development worldwide. Various nanoparticles became one of the most investigated and explored nanotechnology-derived nanostructures especially in chirality where several studies are reported to improve enantiomeric separation of different racemic mixtures. The production of surface-modified nanoparticles has contributed to these limitations in terms of sensitivity, accuracy, and enantioselectivity that can be optimized and therefore makes these surface-modified nanoparticles convenient for enantiomeric identification and separation.

Chiral Nanoceramics

The study of different chiral inorganic nanomaterials has been experiencing rapid growth during the past decade, with its primary focus on metals and semiconductors. Ceramic materials can substantially expand the range of mechanical, optical, chemical, electrical, magnetic, and biological properties of chiral nanostructures, further stimulating theoretical, synthetic, and applied research in this area. An ever-expanding toolbox of nanoscale engineering and self-organization provides a chirality-based methodology for engineering of hierarchically organized ceramic materials. However, fundamental discoveries and technological translations of chiral nanoceramics have received substantially smaller attention than counterparts from metals and semiconductors. Findings in this research area are scattered over a variety of sources and subfields. Here, the diversity of chemistries, geometries, and properties found in chiral ceramic nanostructures are summarized. They represent a compelling materials platform for realization of chirality transfer through multiple scales that can result in new forms of ceramic materials. Multiscale chiral geometries and the structural versatility of nanoceramics are complemented by their high chiroptical activity, enantioselectivity, catalytic activity, and biocompatibility. Future development in this field is likely to encompass chiral synthesis, biomedical applications, and optical/electronic devices. The implementation of computationally designed chiral nanoceramics for biomimetic catalysts and quantum information devices may also be expected.

Molecularly imprinted polymer functionalized silica nanoparticles for enantioseparation of racemic tryptophan in aqueous solution

A method has been developed for preparation of surface molecularly imprinted polymer functionalized silica nanoparticles (SiO₂@MPS@MIP). Firstly, the silica nanoparticles are prepared by a one-pot sol-gel method using tetraethylorthosilicate and 3-methacryloxypropyltrimethoxysilane as functional monomers. Next, the template molecule (L-Trp) is self-assembled with the functional monomer (acrylamide). Finally, SiO₂@MPS@MIP are prepared using N,N'-methylenebisacrylamide as the cross-linker. The prepared SiO₂@MPS@MIP have an average diameter of about 6.3 ± 1.2 nm. They exhibit good selectivity toward L-Trp with an imprinting factor of 6.3. The adsorption isotherm data was well described by the Langmuir model. The maximum adsorption capacities of SiO₂@MPS@MIP for L-Trp and D-Trp were calculated to be 11.1 ± 0.9 and 2.66 ± 0.16 mg g^-1, respectively. An enantiomer excess value of 100% was achieved after adsorption of racemic Trp by the material. The work suggests that SiO₂@MPS@MIP are a promising material for enantioseparation of Trp racemate in aqueous media. Graphical abstract.

Synthesis of molecularly imprinted polymer modified magnetic particles for chiral separation of tryptophan enantiomers in aqueous medium

Molecularly imprinted polymers coated magnetic particles (Fe₃O₄@MIPs) were prepared and used as adsorbents in solid phase extraction for efficient enantioseparation of racemic tryptophan (Trp) in aqueous medium. The amino-modified magnetic particles (Fe₃O₄-NH₂) were first synthesized by one-pot hydrothermal method. Then the template molecules (L-Trp) were assembled on the surface of Fe₃O₄-NH₂. Finally, Fe₃O₄@MIPs were prepared via a sol-gel method using L-Trp@Fe₃O₄-NH₂ complex as matrix, 3-aminopropyltriethoxylsilane and n-octyltriethoxysilane as functional monomers. The as-prepared Fe₃O₄@MIPs were spherical with an average diameter about 149 ± 6.0 nm. The thickness of MIPs layer was approximately 3.5 ± 2.3 nm. The adsorption isotherms data of Fe₃O₄@MIPs toward L-Trp and D-Trp were well described by the Langmuir model. The maximum adsorption capacities of Fe₃O₄@MIPs for L-Trp and D-Trp were calculated to be 17.2 ± 0.34 mg/g and 7.2 ± 0.19 mg/g, respectively. The material exhibited good selectivity toward L-Trp with imprinting factor of 5.6. Excitingly, the enantiomeric excess (ee) of Trp in supernatant after adsorption of racemic Trp by Fe₃O₄@MIPs was as high as 100%. The result suggests that the imprinted caves in Fe₃O₄@MIPs are highly matched with L-Trp molecule in space structure and spatial arrangement of active functional groups. The work also demonstrates that sol-gel technology has great potential in preparation of MIPs for chiral separation.

Enantiomeric Recognition and Separation by Chiral Nanoparticles

Chiral molecules are stereoselective with regard to specific biological functions. Enantiomers differ considerably in their physiological reactions with the human body. Safeguarding the quality and safety of drugs requires an efficient analytical platform by which to selectively probe chiral compounds to ensure the extraction of single enantiomers. Asymmetric synthesis is a mature approach to the production of single enantiomers; however, it is poorly suited to mass production and allows for only specific enantioselective reactions. Furthermore, it is too expensive and time-consuming for the evaluation of therapeutic drugs in the early stages of development. These limitations have prompted the development of surface-modified nanoparticles using amino acids, chiral organic ligands, or functional groups as chiral selectors applicable to a racemic mixture of chiral molecules. The fact that these combinations can be optimized in terms of sensitivity, specificity, and enantioselectivity makes them ideal for enantiomeric recognition and separation. In chiral resolution, molecules bond selectively to particle surfaces according to homochiral interactions, whereupon an enantiopure compound is extracted from the solution through a simple filtration process. In this review article, we discuss the fabrication of chiral nanoparticles and look at the ways their distinctive surface properties have been adopted in enantiomeric recognition and separation.

Decorated single-enantiomer phosphoramide-based silica/magnetic nanocomposites for direct enantioseparation

The nano-composites Fe₃O₄@SiO₂@PTA(+) and Fe₃O₄@SiO₂@PTA(−) (PTA: phosphoric triamide) were prepared and used for the chiral separation of five racemic mixtures.