Decontamination of rat and human skin experimentally contaminated with 99mTc, 201Tl and 131I radionuclides using “Dermadecon” – a skin decontamination kit: an efficacy study

The Effectiveness of Ionized Water as a Radiodecontaminant for 99mTc-Pertechnetate and 131I

Immediate and complete decontamination procedures are essential to restore the functionality, precision, accuracy, and safety of tests done within the nuclear medicine facility. Decontamination is a simple procedure that, if performed correctly, effectively reduces exposure brought about by spills. The determination of a suitable radiodecontaminant may be beneficial in decontaminating patient beds, collimators, probes, and machines. Methods: Two surface types (i.e., stainless steel and vinyl) were contaminated with a predetermined activity of 99mTcO4 and 131I. After air drying, static images of the contaminated surfaces were obtained using a γ-camera to determine the activity counts on each surface before and after decontamination procedures. Different decontaminant contact times (i.e., 5, 10, and 15 min) were used for each decontaminant (i.e., ionized water, 10% bleach, detergent solution, a negative control [no treatment], and a positive control [a commercial radiodecontaminant]). Differences between the effectiveness of ionized water and the other decontaminants against 99mTcO4 and 131I at different contact times were measured, and the mean percentage activity removed (%AR) was compared using 2-way ANOVA at the 0.05 level of significance. Results: 99mTcO4 and 131I contaminants had %ARs of greater than 80% after 5 min of contact time for ionized water and the other decontaminants. At 15 min contact time, ionized water was not as effective as the other decontaminating agents for 131I on vinyl surfaces. There was no significant interaction between the effects of the decontaminants (%AR) and the contact times with stainless steel and vinyl for either 99mTcO4 or 131I. Conclusion: For 99mTcO4 and 131I on stainless steel surfaces, ionized water is an effective decontaminant at contact times of 5, 10, and 15 min. For 99mTcO4 on vinyl surfaces, ionized water is also an effective decontaminant at contact times of 5, 10, and 15 min. For 131I on vinyl surfaces, ionized water is as effective as 10% bleach, detergent solution, and a commercial radiodecontaminant at contact times of 5 and 10 min.

Skin decontamination procedures against potential hazards substances exposure

Decontamination of unprotected skin areas is crucial to prevent excessive penetration of chemical contaminants after criminal or accidental release. A review of literature studies was performed to identify the available decontamination methods adopted to treat skin contamination after chemical, radiological and metal exposures. In this bibliographic review, an overview of the old and recent works on decontamination procedures followed in case of potential hazards substances contaminations with a comparison between these systems are provided. Almost all data from our 95 selected studies conducted in vitro and in vivo revealed that a rapid skin decontamination process is the most efficient way to reduce the risk of intoxication. The commonly-used or recommended conventional procedures are simple rinsing with water only or soapy water. However, this approach has some limitations because an easy removal by flushing may not be sufficient to decontaminate all chemical deposited on the skin, and skin absorption can be enhanced by the wash-in effect. Other liquid solutions or systems as adsorbent powders, mobilizing agents, chelation therapy are also applied as decontaminants, but till nowadays does not exist a decontamination method which can be adopted in all situations. Therefore, there is an urgent need to develop more efficient and successful decontaminating formulations.

Halloysite nanotubes loaded with alkyl trimethyl ammonium bromide as antibacterial agent for root canal sealers

OBJECTIVE

This study aimed at evaluating the effects of experimental endodontic sealers containing halloysite nanotubes (HNT) doped with alkyl trimethyl ammonium bromide (ATAB).

METHODS

An experimental dual-cure resin sealer was formulated and used as control material. This resin was also filled with ATAB and HNT at different ratios (GATAB:HNT 1:1; 1:2; 2:1) generate three experimental resin sealers. The ATAB:HNT filler was characterized through transmission electron microscopy (TEM). While, the experimental and control sealers were evaluated for degree of conversion, softening ration, radiopacity, flow, film thickness, antibacterial activity for biofilm and planktonic bacteria and cytotoxicity in human pulpal cells.

RESULTS

GATAB:HNT _(1:1) significantly increased the immediate DC (p < 0.05), although no difference was encountered between the groups after 24 h (p > 0.05). All the experimental cements (ATAB/HNT) showed relatively low initial Knoop hardness (p < 0.05), but with no significant reduction (p > 0.05) after storage in ethanol (softening ratio). The radiopacity of all groups achieved at least 3 mm of aluminum. All groups showed more than 17 mm of flow, with a film thickness lower than 50 μm (ISO 6876:2012). All the experimental ATAB:HNT cements showed antibacterial activity against E. faecalis; the higher the ATAB ratio, the greater the antibacterial activity (p < 0.05). Cell viability was higher than 70% with no significant difference between the groups (p > 0.05).

SIGNIFICANCE

The incorporation of ATAB/HNT into the experimental resin sealers induced antibacterial activity against biofilm and planktonic E. faecalis without affecting the pulp cell viability or the chemo-mechanical properties.