Unexpected varus deformity and concomitant metal ion release and MRI findings of modular-neck hip stems: descriptive RSA study in 75 hips with 8 years' follow-up

Validation for the effect of intra-exposure patient motion on the assessment of radiostereometric implant migration in a tibial component phantom study

BACKGROUND

An increasing number of radiostereometry (RSA) research studies have long-term follow-up implant migration outcomes, which show ascending curves of implant migration with occasionally decreasing migration. After scrutinizing images and RSA scenes related to the alternating curves, we suppose that intra-exposure patient motion may contribute to that. The main purposes of this in vitro study were 1) to identify whether the patient motion in different directions could result in the inaccurate assessment of implant migration, and 2) to figure out which direction(s) accounted for the alternating curves.

HYPOTHESIS

It was hypothesized that the assessments of implant migration would be less precise and accurate than they could be when patient motion occurred, and such motion would contribute to the alternating curves of radiostereometric implant migration.

MATERIALS AND METHODS

A customized phantom, assembled with a tibial component, was designed for simulating intra-exposure patient motion during follow-up RSA examinations. Two different Roentgen tubes were used as the current standard of radiology departments. Radiographs were acquired in a uniplanar technical arrangement. Two defined protocols were conducted: one is to simulate implant migration outcomes at post-op, the early stage (6months), and the later stage (2 to 10years) ; during the later stage, the other is to mimic patient motion by phantom motion in the medial-lateral (x), distal-proximal (y), and anterior-posterior (z) axes.

RESULTS

Phantom motion could result in the inaccurate assessment of implant migration, and translations along the medial-lateral (x) axis were the most influenced by patient motion. Motion along the medial-lateral (x) axis could account for the curves with decreasing migration.

DISCUSSION

Our assessments of implant migration may be less precise and accurate than they could be when intra-exposure patient motion occurs. We probably neglect the importance of 100% simultaneous exposures, and the influence of patient motion on RSA accuracy and data reliability, due to the difficulty in detecting patient (micro)motion. Electronically synchronized exposures of two paired Roentgen tubes are 100% simultaneous for image acquisition, and they are thus highly recommended for the assessment of implant migration in RSA.

TYPE OF STUDY AND LEVEL OF PROOF

not applicable.

Comparison between model-based RSA and an AI-based CT-RSA: an accuracy study of 30 patients

BACKGROUND AND PURPOSE

Radiostereometry (RSA) is the current gold standard for evaluating early implant migration. CT-based migration analysis is a promising method, with fewer handling requirements compared with RSA and no need for implanted bone-markers. We aimed to evaluate agreement between a new artificial intelligence (AI)-based CT-RSA and model-based RSA (MBRSA) in measuring migration of cup and stem in total hip arthroplasty (THA).

PATIENTS AND METHODS

30 patients with THA for primary osteoarthritis (OA) were included. RSA examinations were performed on the first postoperative day, and at 2 weeks, 3 months, 1, 2, and 5 years after surgery. A low-dose CT scan was done at 2 weeks and 5 years. The agreement between the migration results obtained from MBRSA and AI-based CT-RSA was assessed using Bland-Altman plots.

RESULTS

Stem migration (y-translation) between 2 weeks and 5 years, for the primary outcome measure, was -0.18 (95% confidence interval [CI] -0.31 to -0.05) mm with MBRSA and -0.36 (CI -0.53 to -0.19) mm with AI-based CT-RSA. Corresponding proximal migration of the cup (y-translation) was 0.06 (CI 0.02-0.09) mm and 0.02 (CI -0.01 to 0.05) mm, respectively. The mean difference for all stem and cup comparisons was within the range of MBRSA precision. The AI-based CT-RSA showed no intra- or interobserver variability.

CONCLUSION

We found good agreement between the AI-based CT-RSA and MBRSA in measuring postoperative implant migration. AI-based CT-RSA ensures user independence and delivers consistent results.

Monoblock tapered stems in management of UCS B2 and B3 periprosthetic fractures in revision total hip arthroplasty

Aims

United Classification System (UCS) B2 and B3 periprosthetic fractures in total hip arthroplasties (THAs) have been commonly managed with modular tapered stems. No study has evaluated the use of monoblock fluted tapered titanium stems for this indication. This study aimed to evaluate the effects of a monoblock stems on implant survivorship, postoperative outcomes, radiological outcomes, and osseointegration following treatment of THA UCS B2 and B3 periprosthetic fractures.

Methods

A retrospective review was conducted of all patients who underwent revision THA (rTHA) for periprosthetic UCS B2 and B3 periprosthetic fracture who received a single design monoblock fluted tapered titanium stem at two large, tertiary care, academic hospitals. A total of 72 patients met inclusion and exclusion criteria (68 UCS B2, and four UCS B3 fractures). Primary outcomes of interest were radiological stem subsidence (> 5 mm), radiological osseointegration, and fracture union. Sub-analysis was also done for 46 patients with minimum one-year follow-up.

Results

For the total cohort, stem osseointegration, fracture union, and stem subsidence were 98.6%, 98.6%, and 6.9%, respectively, at latest follow-up (mean follow-up 27.0 months (SD 22.4)). For patients with minimum one-year of follow-up, stem osseointegration, fracture union, and stem subsidence were 97.8%, 97.8%, and 6.5%, respectively.

Conclusion

Monoblock fluted stems can be an acceptable modality for the management of UCS B2 periprosthetic fractures in rTHAs due to high rates of stem osseointegration and survival, and the low rates of stem subsidence, and revision. Further research on the use of this stem for UCS B3 periprosthetic fractures is warranted to determine if the same conclusion can be made for this fracture pattern.

Femoral Stem Dislocation Caused by Trunnionosis Along with Adverse Local Tissue Reaction: A Case Report and a New Technique of Head to Cone Cementing

In total hip replacement (THR), fretting and corrosion at the modular head-neck junction (trunnionosis) may cause adverse local tissue reaction (ALTR). In this report, we presented a 34 years woman with a history of THR eight years ago, presenting with acute pain and limping. The radiographic assessment revealed stem-head dislocation for which a revision hip surgery was planned. Surprisingly, we observed pseudotumor and tissue necrosis resulting from the body's reaction to cobalt-chromium alloy. The revision surgery entailed pseudotumor debridement and replacing the femoral head with a new metal head (size 36, long). Due to the separation of the femoral head on a stem, we fixed it on a stem using bone cement. The stem (Omnifit®, Stryker®) was well-fixed and retained to avoid fractures and infection risk. This technique revealed an acceptable outcome without recurrence of ALTR after a one-year follow-up. Our findings suggest that stem dislocation secondary to trunnionosis might be a long-term complication after THR with subsequent ALTR.

Long-term survivorship of an exchangeable-neck hip prosthesis with a Ti-alloy/Ti-alloy neck-stem junction

INTRODUCTION

Breakage of exchangeable-neck (EN) and adverse local tissue reactions (ALTRs) to neck-stem junction (NSJ) damage products are responsible for increasing the revision rate of EN hip prostheses. We investigated the survivorship of an EN hip prosthesis including a NSJ with both components made of titanium alloy (Ti-alloy/Ti-alloy) to assess whether, and to what extent, EN breakage and NSJ damage affected implant survivorship.

MATERIALS AND METHODS

Using data from a hip replacement registry, we determined survivorship of 2857 EN prostheses. Long-offset configurations of head and EN were implanted in heavy (> 90 kg) patients only in 23 hips. We investigated under which conditions EN breakages or ALTRs occurred. We also measured titanium (Ti) and vanadium (V) blood concentrations in 24 patients with a unilateral well-working prosthesis.

RESULTS

The 17-year survival rates for any reason and aseptic loosening of any component were 88.9% (95%CI 87.5-90.1; 857 hips at risk) and 96.9% (95%CI 96.0-97.6), respectively. There were two cases of EN breakage and one case of ALTR (metallosis), due to rim-neck impingement, out of 276 revisions. After an average period of 9.8 years (range 7.8-12.8 years), the maximum Ti and V blood concentrations in patients with a well-working prosthesis were 5.0 µg/l and 0.16 µg/l, respectively.

CONCLUSION

The present incidence of EN breakage or ALTR is lower than those reported in other studies evaluating EN hip prosthesis survivorship. This study suggests that (i) the risk of EN breakage is reduced by limiting the use of long-offset configurations in heavy patients and (ii) Ti-alloy/Ti-alloy NSJ damage products do not promote ALTR nor significantly alter the rate of implant loosening. Since design decisions and implant configuration determine the NSJ strength, the NSJ strength in working conditions must be thoroughly investigated to proper define the clinical indications for any EN design.