Effect of different ozone treatments on the degradation of deoxynivalenol and flour quality in Fusarium-contaminated wheat

Surface disinfection of wheat kernels using gas phase hydroxyl-radical processes: Effect on germination characteristics, microbial load, and functional properties

Wheat kernels harbor a diverse microflora that can negatively affect the suitability of the grains for further processing. To reduce surface microflora, a kernel disinfection method is required that does not affect grain functionality. Three different versions of gas phase hydroxyl-radical processes were compared with the common method for grain disinfection, that is, a bleach treatment. The gas phase hydroxyl-radicals are generated by the UV-C mediated degradation of hydrogen peroxide and/or ozone in a near water-free process. It was found that treating kernels with a bleach solution could reduce total aerobic count (TAC) and fungal count to below the level of enumeration. In comparison, the gas phase hydroxyl-radical treatment, that is, H2 O2 -UV-ozone treatment, could support a 1.3 log count reduction (LCR) in TAC and a 1.1 LCR in fungal count. The microbial load reduction for the wholemeal samples was less pronounced as endophytic microorganisms were less affected by all treatments, hinting at a limited penetration depth of the treatments. Despite reducing the microbial load on the kernel surface through the bleach and H2 O2 -UV-ozone treatments, none of these treatments resulted in a reduced microbial count on grains that underwent sprouting after the treatments. No negative effect on germination power or development of the seedling was observed for any of the treatments. The gluten aggregation behavior and xylanase activity of the wholemeal also remained unchanged after the gas phase hydroxyl-radical treatments. Our findings suggest that UV-H2 O2 -ozone treatment shows promise for dry-kernel disinfection, but further optimization of the processing parameters is required.

Recalling the reported toxicity assessment of deoxynivalenol, mitigating strategies and its toxicity mechanisms: Comprehensive review

Mycotoxins frequently contaminate a variety of food items, posing significant concerns for both food safety and public health. The adverse consequences linked to poisoning from these substances encompass symptoms such as vomiting, loss of appetite, diarrhea, the potential for cancer development, impairments to the immune system, disruptions in neuroendocrine function, genetic damage, and, in severe cases, fatality. The deoxynivalenol (DON) raises significant concerns for both food safety and human health, particularly due to its potential harm to vital organs in the body. It is one of the most prevalent fungal contaminants found in edible items used by humans and animals globally. The presence of harmful mycotoxins, including DON, in food has caused widespread worry. Altered versions of DON have arisen as possible risks to the environment and well-being, as they exhibit a greater propensity to revert back to the original mycotoxins. This can result in the buildup of mycotoxins in both animals and humans, underscoring the pressing requirement for additional investigation into the adverse consequences of these modified mycotoxins. Furthermore, due to the lack of sufficient safety data, accurately evaluating the risk posed by modified mycotoxins remains challenging. Our review study delves into conjugated forms of DON, exploring its structure, toxicity, control strategies, and a novel animal model for assessing its toxicity. Various toxicities, such as acute, sub-acute, chronic, and cellular, are proposed as potential mechanisms contributing to the toxicity of conjugated forms of DON. Additionally, the study offers an overview of DON's toxicity mechanisms and discusses its widespread presence worldwide. A thorough exploration of the health risk evaluation associated with conjugated form of DON is also provided in this discussion.

Detoxification of mycotoxins in agricultural products by non-thermal physical technologies: a review of the past five years

Mycotoxins produced by Aspergillus spp., Penicillium spp. and Fusarium spp. with small molecular weight and thermal stability, are highly toxic and carcinogenic secondary metabolites. Mycotoxins have caused widespread concern regarding food safety internationally because of their adverse effects on the health of humans and animals, and the major economic losses they cause. There is an urgent need to find ways to reduce or eliminate the impact of mycotoxins in food and feed without introducing new safety issues, or reducing nutritional quality. Non-thermal physical technology is the basis for new techniques to degrade mycotoxins, with great potential for practical detoxification applications in the food industry. Compared with conventional thermal treatments, non-thermal physical detoxification technologies are easier to apply and effective, with less adverse impact on the nutritional value of agricultural products. The advantages, limitations and development prospects of these new detoxification technologies are discussed. Further studies are recommended to standardize the treatment conditions for each detoxification technology, evaluate the safety of the degradation products, and to combine different detoxification technologies to achieve synergistic effects. This will facilitate realization of the great potential of the new technologies and the development of practical applications.

Subcritical and Supercritical Fluids to Valorize Industrial Fruit and Vegetable Waste

The valorization of industrial fruit and vegetable waste has gained significant attention due to the environmental concerns and economic opportunities associated with its effective utilization. This review article comprehensively discusses the application of subcritical and supercritical fluid technologies in the valorization process, highlighting the potential benefits of these advanced extraction techniques for the recovery of bioactive compounds and unconventional oils from waste materials. Novel pressurized fluid extraction techniques offer significant advantages over conventional methods, enabling effective and sustainable processes that contribute to greener production in the global manufacturing sector. Recovered bio-extract compounds can be used to uplift the nutritional profile of other food products and determine their application in the food, pharmaceutical, and nutraceutical industries. Valorization processes also play an important role in coping with the increasing demand for bioactive compounds and natural substitutes. Moreover, the integration of spent material in biorefinery and biorefining processes is also explored in terms of energy generation, such as biofuels or electricity, thus showcasing the potential for a circular economy approach in the management of waste streams. An economic evaluation is presented, detailing the cost analysis and potential barriers in the implementation of these valorization strategies. The article emphasizes the importance of fostering collaboration between academia, industry, and policymakers to enable the widespread adoption of these promising technologies. This, in turn, will contribute to a more sustainable and circular economy, maximizing the potential of fruit and vegetable waste as a source of valuable products.

Degradation of deoxynivalenol in wheat by double dielectric barrier discharge cold plasma: identification and pathway of degradation products

BACKGROUND

Deoxynivalenol (DON) produced during the onset of fusarium head blight not only affects the quality and safety of wheat but also causes serious harm to human and livestock health. However, due to the high stability of DON, it is difficult to eliminate it or reduce it naturally after it has been produced. Cold plasma technology is a non-thermophysical processing technology that has been widely used for microbial inactivation and mycotoxin degradation. In this study, the degradation efficiency of double dielectric barrier discharge (DDBD) cold plasma on DON in aqueous solution and wheat was studied; the structures of degradation products of DON and its pathway were clarified, and the effect of DDBD plasma on wheat quality was evaluated.

RESULTS

Double dielectric barrier discharge cold plasma was used for efficient degradation of DON (0.5 ~ 5 μgmL^-1) solution and achieved a degradation rate of 98.94% within 25 min under the optimal conditions (voltage 100 V, frequency 200 Hz, duty cycle 80%). Furthermore, 10 degradation products (C₁₅ H₂₄ O₅ , C₁₅ H₂₂ O₆ , C₁₅ H₂₂ O₉ , C₁₆ H₂₂ O₇ , C₁₅ H₂₀ O₇ , C₁₅ H₂₀ O₉ , C₁₅ H₁₈ O₈ , C₁₅ H₂₂ O₅ , C₁₆ H₂₄ O₅ , and C₁₅ H₁₈ O₉ ) were identified by ultra-performance liquid chromatography-time of flight-mass spectrometry (UPLC-TOF-MS/MS) combined with Metabolitepilot and Peakview software. The degradation pathway of DON was obtained based on the chemical structures and accurate mass of these products. The DON degradation rate of 61% in wheat was achieved after treatment for 15 min, which slightly affects the moisture content, proteins, and wheat starch.

CONCLUSION

Applying DDBD to wheat could effectively reduce the level of DON contamination, which provides a theoretical basis for applying cold plasma to the degradation of DON in wheat. © 2022 Society of Chemical Industry.

Selected Quality Attributes of Wheat Flour Added with Overozonized Wheat Flour

Overozonized wheat flour was added to unozonized wheat flour at three different ratios (M1: 1 : 1; M2: 1 : 2; and M3: 1 : 3), and the mixed flour was evaluated for quality properties, including pH, protein component, dough property, pasting property, and steamed bread quality. The pH of the mixed flour gradually increased as the addition content of overozonized flour decreased. The three mixed flour had higher insoluble polymeric protein (IPP) content than unozonized flour. Compared with overozonized flour, M1 and M2 flour did not show a significant difference in IPP content, but M3 flour exhibited a decreased IPP content. Three mixed flour had higher dough development time and dough stability time than both unozonized and overozonized flour, and there was no significant difference among three mixed flour in these two dough parameters. Peak, trough, and final viscosities of the three mixed flour were between those of unozonized and overozonized flour. Steamed bread of three mixed flour had larger specific volume and better texture than that of overozonized flour, with steamed bread of M3 flour showing the best attributes. Among the three mixed flour, M1 flour was the closest to overozonized flour in volatile compounds of steamed bread. These results suggested overozonized flour can be mixed with unozonized flour to decrease the deterioration of overozonization on the dough and food-making properties of wheat flour, but the mixing ratio should be taken into consideration to obtain a better quality.