Microstructure and mechanical properties of rostrum in Cyrtotrachelus longimanus (Coleoptera: Curculionidae)

Tensile mechanical properties and finite element simulation of the wings of the butterfly Tirumala limniace

This study examined the morphological characteristics and mechanical properties of the wings of Tirumala limniace. The wings of this butterfly, including the forewings and hindwings, are composed mainly of a flexible wing membrane and supporting wing veins. Scanning electron microscopy was employed to observe specific positions of the wing membrane and veins and reveal the morphological characteristics. Tensile experiments were conducted to evaluate the mechanical properties of the wings and proved that the multifiber layer structures have a significantly fixed orientation of fiber alignment. A butterfly wing model reconstructed in reverse based on the finite element method was used to analyze the static characteristics of the wing structure in detail. Evaluation of stress and strain after applying uniform loading, perpendicular loading, and torsion revealed that minor wing deformation occurred and was concentrated near the main wing vein, which verifies the steadiness of the butterfly wing structure. Additionally, the flapping of butterfly wings was simulated using computational fluid dynamics to study the flow field near the butterfly wings and the distribution of pressure gradient on the wings. The results confirmed the effect of wing veins on maintaining the flight performance.

Structural stabilization of honeybee wings based on heterogeneous stiffness

Structural stabilization for a membrane structure under high-frequency vibration is still a recognized problem. In nature, honeybee wings with non-uniform material properties demonstrate excellent anti-interference ability. However, the correlation between the structural stabilization and mechanical properties of insect wings has not been completely verified. Here we demonstrate that the sclerotization diversity partially distinguishes the stiffness inhomogeneity of the wing structure. Furthermore, a wing cross-section model with diversity in elastic modulus is constructed to analyze the effect of stiffness distribution on stress optimization during flight. Our results demonstrate that the heterogeneous stiffness promotes the stress distribution and structural stabilization of the wing during flight, which may inspire more optimal designs for anisotropic high-strength membrane structures.

The Armor of the Chinese Sturgeon: A Study of the Microstructure and Mechanical Properties of the Ventral Bony Plates

Benefiting from their unique morphological characteristics and structural properties, the ventral bony plates of the Chinese sturgeon are excellent biological protective tissue. In this work, we studied the micro- and macro-morphology and mechanical properties of the ventral bony plates of the Chinese sturgeon to elucidate the special protective mechanisms of the bony plates. Experiments involving scanning electron microscopy and energy-dispersive X-ray spectroscopy revealed that the bony plates possess a hierarchical structure and a ridge-like shape. This structure comprises a surface layer containing mineralized nanocrystals and an internal layer containing mineralized collagen fibers. From the surface layer to the internal layer, the degree of mineralization decreases gradually. Nanoindentation, tension, and compression tests demonstrated that the bony plates feature excellent mechanical properties and a high specific tensile strength comparable to that of stainless steel. Moreover, water can significantly improve the fracture toughness and deformability of the bony plates and effectively enhance the damage tolerance of the structures. The obtained results concerning the microstructure-property-function relationships of the ventral bony plates of the Chinese sturgeon may provide novel insights for designing protective structures that are both lightweight and high strength.

The forewing of a black cicada Cryptotympana atrata (Hemiptera, Homoptera: Cicadidae): Microscopic structures and mechanical properties

Insects in nature flap their wings to generate lift force and driving torque to adjust their attitude and control stability. An insect wing is a biomaterial composed of flexible membranes and tough veins. In this paper, we study the microscopic structures and mechanical properties of the forewing of the black cicada, Cryptotympana atrata. The thickness of the wing membranes and the diameter of veins varied from the wing root to the tip. The thickness of the wing membranes ranged from 6.0 to 29.9 μm, and the diameter of the wing veins decreased in a gradient from the wing root to the tip, demonstrating that the forewing of the black cicada is a nonuniform biomaterial. The elastic modulus of the membrane near the wing root ranged from 4.45 to 5.03 GPa, which is comparable to that of some industrial membranes. The microstructure of the wing vein exhibited a hollow tubular structure with flocculent structure inside. The "fresh" sample stored more water than the "dry" sample, resulting in a significant difference in the elastic modulus between the fresh and dried veins. The different membrane thicknesses and elastic moduli of the wing veins near the root and tip resulted in varied degrees of deformation on both sides of the flexion line of the forewing during twisting. The measurements of the forewing of the cicada may serve as a guide for selecting airfoil materials for the bionic flapping-wing aircraft and promote the design and manufacture of more durable bionic wings in the future.

Mathematical Model and microCT-Based Kinematic Analysis of the Rostrum Mouthparts in Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae)

To uncover the chewing mechanism of Cyrtotrachelus buqueti Guer, a mathematical model was created and a kinematic analysis of its rostrum mouthparts was conducted for, to our knowledge, the first time. To reduce noise and improve the quality of scanning electron micrographs of the weevil's mouthparts, nonlocal means and integral nonlocal means algorithms were proposed. Additionally, based on a comparison and analysis of five classical edge detection algorithms, a multiscale edge detection algorithm based on the B-spline wavelet was used to obtain the boundaries of structural features. The least squares method was used to analyze the data of the mouthparts to fit the mathematical model and fitted curves were obtained using Gaussian equations. The results show that curvature and concave-convex variations of the weevil's mouthparts can highlight fluctuations in friction effects when it chews bamboo shoots, which is helpful in preventing debris from bamboo shoots or other debris from sticking to the mouthpart surfaces. Moreover, this paper highlights the utility of micro-computed tomography (microCT) for three-dimensional (3D) reconstruction and a flowchart is suggested. The reconstructed slices were 9.0 μm thick and an accurate 3D rendered model was obtained from a series of microCT slices. Finally, a real model of the rostrum mouthparts was analyzed using finite-element analysis. The results provide a biological template for the design of a novel bionic drilling mechanism.

Reducing the risk of rostral bending failure in Curculio Linnaeus, 1758

With over 300 species worldwide, the genus Curculio Linnaeus, 1758 is a widespread, morphologically diverse lineage of weevils that mainly parasitize nuts. Females use the rostrum, an elongate cuticular extension of the head, to excavate oviposition sites. This process causes extreme bending and deformation of the rostrum, without apparent harm to the structure. The cuticle of the rostral apex exhibits substantial modifications to its composite structure that enhance the elasticity and resiliency of this structure. Here we develop finite element models of the head and rostrum for three Curculio species representing disparate North American clades and rostral morphotypes. The models were subjected to varying apical loads and to prescribed dislocation of the head capsule, with and without representing the cuticular modifications of the rostral apex. We found that the altered layer thicknesses and macrofiber orientation angles of the rostral apex fully explain the observed elasticity of the rostrum. These modifications have a synergistic effect that greatly enhances the flexibility of the rostral apex. Consequently, the cuticle composite profile of the rostral apex substantially mitigates the risk of fracture in dorso-apical flexion. Removing the cuticular modifications, in turn, causes a negative margin of safety for rostral bending, implying strong risk of catastrophic structural failure. The occipital sulci were identified as an important source of biomechanical constraint upon the elasticity of the rostrum, and exhibit the greatest risk of failure within this structure. The apical cuticle profile greatly reduced the maximum stresses and strain energy accumulated in the rostrum, thereby resulting in a positive margin of safety and reducing the risk of fracture. Our findings imply that the primary selective pressure influencing the evolution of the rostral cuticle was most likely negative selection of structural failure caused by bending. STATEMENT OF SIGNIFICANCE: Weevils are among the most diverse and evolutionarily successful animal lineages on Earth. Their success is driven in part by a structure called the rostrum, which gives weevil heads a characteristic "snout-like" appearance. Nut weevils in the genus Curculio use the rostrum to drill holes into developing fruits and nuts, into which they deposit their eggs. During oviposition this exceedingly slender structure is bent into a straightened configuration - in some species up to 90^∘ - but does not suffer any damage during this process. Using finite element models of the rostra of three morphologically distinct species, we show that the Curculio rostrum is only able to withstand repeated, extreme bending because of modifications to the composite structure of the cuticle in the rostral apex. These modifications were shown previously to enhance the intrinsic toughness of the cuticle; in this study, we demonstrate that modification of the rostral cuticle also results in more evenly distributed bending stresses, further reducing the risk of fracture. This is the first time that the laminate profile, orthotropic behavior, and functional gradation of the cuticle have been incorporated into a three-dimensional finite element model of an insect cuticular structure. Our models highlight the significance of biomechanical constraint - i.e., avoidance of catastrophic structural failure - on the evolution of insect morphology.

A review: Learning from the flight of beetles

Some Coleoptera (popularly referred to as beetles) can fly at a low Reynolds number with their deployable hind wings, which directly enables a low body weight-a good bioinspiration strategy for miniaturization of micro-air vehicles (MAVs). The hind wing is a significant part of the body and has a folding/unfolding mechanism whose unique function benefits from different structures and materials. This review summarizes the actions, factors, and mechanisms of beetle flight and bioinspired MAVs with deployable wings. The elytron controlled by muscles is the protected part for the folded hind wing and influences flight performance. The resilin, the storage material for elasticity, is located in the folding parts. The hind wings' folding/unfolding mechanism and flight performance can be influenced by vein structures of hollow, solid and wrinkled veins, the hemolymph that flows in hollow veins and its hydraulic mechanism, and various mechanical properties of veins. The action of beetle flight includes flapping flight, hovering, gliding, and landing. The hind wing is passively deformed through force and hemolymph, and the attack angle of the hind wing and the nanomechanics of the veins, muscles and mass body determine the flight performance. Based these factors, bioinspired MAVs with a new deployable wing structure and new materials will be designed to be much more effective and miniaturized. The new fuels and energy supply are significant aspects of MAVs.

Drug Discovery Insights from Medicinal Beetles in Traditional Chinese Medicine

Traditional Chinese medicine (TCM) was the primary source of medical treatment for the people inhabiting East Asia for thousands of years. These ancient practices have incorporated a wide variety of materia medica including plants, animals and minerals. As modern sciences, including natural products chemistry, emerged, there became increasing efforts to explore the chemistry of this materia medica to find molecules responsible for their traditional use. Insects, including beetles have played an important role in TCM. In our survey of texts and review articles on TCM materia medica, we found 48 species of beetles from 34 genera in 14 different families that are used in TCM. This review covers the chemistry known from the beetles used in TCM, or in cases where a species used in these practices has not been chemically studied, we discuss the chemistry of closely related beetles. We also found several documented uses of beetles in Traditional Korean Medicine (TKM), and included them where appropriate. There are 129 chemical constituents of beetles discussed.

Colour-assisted variation in elytral ICP-OES-based ionomics in an aposematic beetle

Very little is known about how the elemental composition (ionome) of an insect cuticle varies as a result of different colouration. Using inductively-coupled plasma optical emission spectrometry (ICP-OES), we established ionomic profiles in microsamples of two adjacent regions of an insect cuticle with a contrasting colour pattern, namely, the black and orange regions of the elytra of the aposematic burying beetle Nicrophorus vespillo. The analysis revealed 53 elements (ranging in atomic weight from Na to Bi) occurring above the detection limit. The frequency of detectability of individual elements varied strongly, and only ten elements (Ba, Cu, Fe, K, Mg, Mn, P, Rb, Sb and Zn) were present in concentrations exceeding the detection limit in all the samples. The sum of concentrations of all elements in the orange regions of the elytra was 9% lower than in the black ones. The opposite distribution was displayed by the rare earth elements (REEs), the sum of which was 17% lower in the black elytral regions than in the orange ones. The concentrations of six elements were significantly higher in the black than in the orange regions: Al (by 97%), Cu (41%), Mn (14%), Na (46%), Se (97%) and W (47%). The concentrations of essential elements measured in both the black and orange regions exhibited very considerable variance: Ca (σ² = 1834; 1882, respectively), K (145; 82) P (97; 76), Na (84; 53), Mg (24; 26) and Ba (9; 13). This, in part, could be attributed to individual differences, e.g. those resulting from the consumption of animal carcasses of different quality/chemical composition, but interference between elements and the consequent lowering of measurement quality are also possible. We highlight the fact that deeper insight into the basic relationship between insect colouration and variation in elemental composition requires micro-sampling of the homogeneous layers of an exoskeleton.

Optimization design of lightweight structure inspired by glass sponges (Porifera, Hexacinellida) and its mechanical properties

The glass sponge is a porous lightweight structure in the deep sea. It has high toughness, high strength, and high stability. In this work, a super-depth-of-field microscope was employed to observe the microstructure of the glass sponge. Based on its morphological characteristics, two novel bio-inspired lightweight structures were proposed, and the finite-element analyses (FEA) of the structures were carried out under compression, torsion, and bending loads, respectively. The structure samples were fabricated using stereolithography 3D-printing technology, and the dimension sizes of the samples were equal to those of the corresponding FEA models. Mechanical tests were performed on an electronic universal testing machine, and the results were used to demonstrate the reliability of the FEA. Additionally, lightweight numbers (LWN) were proposed to evaluate the lightweight efficiency, and a honeycomb structure was selected as the reference structure. The results indicate that the lightweight numbers of the novel bio-inspired structures are higher than those of the honeycomb structure, respectively. Finally, the proposed structures were optimized by the response surface, BP (Back Propagation) and GA-BP (Genetic Algorithm optimized Back Propagation) method. The results show that the GA-BP model after training has a high accuracy. These results can provide significant guidance for the design of tube-shaped, thin-walled structures in the engineering.

Avoidance of Catastrophic Structural Failure as an Evolutionary Constraint: Biomechanics of the Acorn Weevil Rostrum

The acorn weevil (Curculio Linnaeus, 1758) rostrum (snout) exhibits remarkable flexibility and toughness derived from the microarchitecture of its exoskeleton. Modifications to the composite profile of the rostral cuticle that simultaneously enhance the flexibility and toughness of the distal portion of the snout are characterized. Using classical laminate plate theory, the effect of these modifications on the elastic behavior of the exoskeleton is estimated. It is shown that the tensile behavior of the rostrum across six Curculio species with high morphological variation correlates with changes in the relative layer thicknesses and orientation angles of layers in the exoskeleton. Accordingly, increased endocuticle thickness is strongly correlated with increased tensile strength. Rostrum stiffness is shown to be inversely correlated with work of fracture; thus allowing a highly curved rostrum to completely straighten without structural damage. Finally, exocuticle rich invaginations of the occipital sutures are identified both as a likely site of crack initiation in tensile failure and as a source of morphological constraint on the evolution of the rostrum in Curculio weevils. It is concluded that avoidance of catastrophic structural failure, as initiated in these sutures under tension, is the driving selective pressure in the evolution of the female Curculio rostrum.

Nanoindentation Properties and Finite Element Analysis of the Rostrum of Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae)

This work focuses on the application of nanoindentation measurements and the finite element method for analyzing the mechanical properties of the rostrum of the outstanding driller Cyrtotrachelus buqueti Guer. Nanoindentation tests were carried out to measure the Young's modulus and hardness of the rostrum, with the results for the "dry" samples being 13.886 ± 0.75 and 0.368 ± 0.0445 GPa, respectively. The values for the "fresh" samples showed no clear difference from those of the "dry" ones. Moreover, field observation was conducted to determine the motion behaviors of the rostrum on the weevil. Micro-computed tomography technology was employed to obtain structural information about the rostrum, using 9 µm slices. A real three-dimensional model of the rostrum was created using the MIMICS application. Finally, the mechanical properties of the rostrum were determined by finite element analysis. It was concluded that the rostrum provides an ideal biological template for the design of biocomposite materials and lightweight tube-shaped structures. The properties determined in this study can potentially be applied in different fields, such as in the design of automotive hybrid transmission shafts, helicopter tail drive shafts, robotic arms, and other sandwich structures in aerospace engineering.