Antimicrobial effect of silver zinc oxide (Ag-ZnO) nanocomposite particles

Surface Charge-Switchable Antifouling Block Copolymer with Bacteriostatic Properties

Zwitterionic polymers are an emerging family of effective, low-fouling materials that can withstand unintended interactions with biological systems while exhibiting enhanced activity in bacterial matrix deterioration and biofilm eradication. Herein, we modularly synthesized an amphiphilic block copolymer, ZABCP, featuring potential bacteriostatic properties composed of a charge-switchable polyzwitterionic segment and a redox-sensitive pendant disulfide-labeled polymethacrylate block. The leucine-appended polyzwitterionic segment with alternatively positioned cationic amine and anionic carboxylate functionalities undergoes charge alterations (+ve → 0 → -ve) on pH variation. By introducing appropriate amphiphilicity, ZABCP forms distinct vesicles with redox-sensitive bilayer membranes and zwitterionic shielding coronas, enabling switching of surface charge. ZABCP vesicles exhibit 180 ± 20 nm hydrodynamic diameter, and its charge switching behavior in response to pH was confirmed by the change of zeta potential value from -23 to +36 mV. The binding interaction between ZABCP vesicles with lysozyme and pepsin proteins strengthens when the surface charge shifts from neutral (pH 7.4) to either anionic or cationic. This surface-charge-switchable phenomenon paves the way for implementing cationic ZABCP vesicles for bacterial cell growth inhibition, which is shown by the pronounced transition of cellular morphology, including clustering, aggregation, or elongation as well as membrane disruption for both Bacillus subtilis (Gram-positive) and Escherichia coli (Gram-negative). Such enhanced bacteriostatic activity could be ascribed to a strong electrostatic interaction between cationic vesicles and negatively charged bacterial membranes, leading to cell membrane disruption. Overall, this study provides a tailor-made approach to adopt low-fouling properties and potential bacteriostatic activity using zwitterionic polymers through precise control of pH.

Facile biosynthesis of Ag-ZnO nanocomposites using Launaea cornuta leaf extract and their antimicrobial activity

The quest to synthesize safe, non-hazardous Ag-ZnO nanoomposites (NCs) with improved physical and chemical properties has necessitated green synthesis approaches. In this research, Launaea cornuta leaf extract was proposed for the green synthesis of Ag-ZnO NCs, wherein the leaf extract was used as a reducing and capping agent. The antibacterial activity of the prepared nanoomposites was investigated against Escherichia coli and Staphylococcus aureus through the disc diffusion method. The influence of the synthesis temperature, pH, and precursor concentration on the synthesis of the Ag-ZnO NCs and antimicrobial efficacy were investigated. The nanoparticles were characterized by ATR-FTIR, XRD, UV-Vis, FESEM, and TEM. The FTIR results indicated the presence of secondary metabolites in Launaea cornuta which assisted the green synthesis of the nanoparticles. The XRD results confirmed the successful synthesis of crystalline Ag-ZnO NCs with an average particle size of 21.51 nm. The SEM and TEM images indicated the synthesized nanoparticles to be spherical in shape. The optimum synthesis conditions for Ag-ZnO NCs were at 70 °C, pH of 7, and 8% silver. Antibacterial activity results show Ag-ZnO NCs to have higher microbial inhibition on E. coli than on S. aureus with the zones of inhibition of 21 ± 1.08 and 19.67 ± 0.47 mm, respectively. Therefore, the results suggest that Launaea cornuta leaf extract can be used for the synthesis of Ag-ZnO NCs.

Metal-Polymer Nanocomposites: A Promising Approach to Antibacterial Materials

There has been a new approach in the development of antibacterials in order to enhance the antibacterial potential. The nanoparticles are tagged on to the surface of other metals or metal oxides and polymers to achieve nanocomposites. These have shown significant antibacterial properties when compared to nanoparticles. In this article we explore the antibacterial potentials of metal-based and metal-polymer-based nanocomposites, various techniques which are involved in the synthesis of the metal-polymer, nanocomposites, mechanisms of action, and their advantages, disadvantages, and applications.

Metal/metal oxide nanocomposites for bactericidal effect: A review

Many microbial species causing infectious disease all over the world became a social burden and creating threat among community. These microbes possess long lifetime, enhancing mortality and morbidity rate in affected organisms. In this condition, the treatment was ineffective and more chances of spreading of infection into other organisms. Hence, it is necessary to initiate infection control efforts and prevention activities against multidrug resistant microbes, to reduce the death rate of people. Seriously concerning towards this problem progress was shown in developing significant drugs with least side effects. Emergence of nanoparticles and its novelty showed effective role in targeting and destructing microbes well. Further, many research works have shown nanocomposites developed from nanoparticles coupled with other nanoparticles, polymers, carbon material acted as an exotic substance against microbes causing severe loss. However, metal and metal oxide nanocomposites have gained interest due to its small size and enhancing the surface contact with bacteria, producing damage to it. The bactericidal mechanism of metal and metal oxide nanocomposites involve in the production of reactive oxygen species which includes superoxide radical anions, hydrogen peroxide anions and hydrogen peroxide which interact with the cell wall of bacteria causing damage to the cell membrane in turn inhibiting the further growth of cell with leakage of internal cellular components, leading to death of bacteria. This review provides the detailed view on antibacterial activity of metal and metal oxide nanocomposite which possessed novelty due to its physiochemical changes.

Design and synthesis of fatty acid derived 4-methoxybenzylamides as antimicrobial agents

A new series of fatty acid amides viz. N-(4-methoxybenzyl)undec-10-enamide (5), (9Z, 12R)-12-Hydroxy-N-(4-methoxybenzyl)octadec-9-enamide (6) and N-(4-methoxy benzyl)oleamide (7) were synthesized by using a suitable synthetic route involving DCC and DMAP as catalysts. The synthesized compounds were characterized through FTIR, NMR spectroscopy, and mass spectrometry. DNA binding studies through spectroscopy and molecular docking were performed to evaluate the binding mechanism of molecules (5-7) with (ctDNA). The inhibition zone with reference to standards, Minimum Inhibitory Concentration (MIC) and Minimum Killing Concentration (MKC) values were determined to study the in vitro antimicrobial activity for tested compounds. Among all the tested compounds, the compound 6 containing hydroxy group at the fatty acid chain showed most powerful antifungal as well as antibacterial activity.

Evaluate the Effect of Zinc Oxide and Silver Nanoparticles on Biofilm and icaA Gene Expression in Methicillin-Resistant Staphylococcus aureus Isolated From Burn Wound Infection

Methicillin-resistant Staphylococcus aureus is the cause of nosocomial and community-acquired infections. This study aimed to evaluate the effect of zinc oxide and silver nanoparticles (ZnO-Ag NPs) on biofilms formation and icaA gene expression in methicillin-resistant S. aureus (MRSA). In this study, three standard strains (ATCC 43300, 25923, and 29913) and a clinical isolate are included. The minimum inhibitory concentration (MIC) of nanoparticles was determined by microdilution broth method. The antibacterial effects of ZnO-Ag NPs either alone or in combination with each other were compared with vancomycin (as the control group). The effect of MIC and sub-MIC concentrations of ZnO-Ag NPs on biofilm formation was determined by the microtiter plate method. The expression level of the icaA gene was assessed by real-time PCR LightCycler® 96 software (Version 1.1.0.1320, Roche, Germany). technique. All experiments were repeated three times. Data were analyzed using SPSS software through ANOVA and t-test. The P-value of less than .05 was considered as statistically significant. The average MICs of ZnO, Ag, and ZnO-Ag NPs compounds were 393.2, 179.8, and 60.8 μg/ml, respectively. The compound of ZnO-Ag NPs had a synergistic effect against all isolates. ZnO-Ag NPs decreased the biofilm formation rate at MIC and sub-MIC concentrations (P < .001). Sub-MIC ZnO-Ag NPs concentration significantly reduced the icaA gene expression in S. aureus strains (P < .03). The sub-MIC concentration of ZnO-Ag NPs reduced biofilm formation rate and icaA gene expression in Staphylococcus aureus strains compared with vancomycin. It can be used to cover medical devices after examining more clinical isolates to prevent bacterial colonization.

Chemical Composition and Antimicrobial Effectiveness of Ocimum gratissimum L. Essential Oil Against Multidrug-Resistant Isolates of Staphylococcus aureus and Escherichia coli

The study investigated the antimicrobial activity of the essential oil extract of Ocimum gratissimum L. (EOOG) against multiresistant microorganisms in planktonic and biofilm form. Hydrodistillation was used to obtain the EOOG, and the analysis of chemical composition was done by gas chromatography coupled with mass spectrometry (GC/MS) and flame ionization detection (GC/FID). EOOG biological activity was verified against isolates of Staphylococcus aureus and Escherichia coli, using four strains for each species. The antibacterial action of EOOG was determined by disk diffusion, microdilution (MIC/MBC), growth curve under sub-MIC exposure, and the combinatorial activity with ciprofloxacin (CIP) and oxacillin (OXA) were determined by checkerboard assay. The EOOG antibiofilm action was performed against the established biofilm and analyzed by crystal violet, colony-forming unit count, and SEM analyses. EOOG yielded 1.66% w/w, with eugenol as the major component (74.83%). The MIC was 1000 µg/mL for the most tested strains. The growth curve showed a lag phase delay for both species, mainly S. aureus, and reduced the growth level of E. coli by half. The combination of EOOG with OXA and CIP led to an additive action for S. aureus. A significant reduction in biofilm biomass and cell viability was verified for S. aureus and E. coli. In conclusion, EOOG has relevant potential as a natural alternative to treat infections caused by multiresistant strains.

Novel Green Biomimetic Approach for Synthesis of ZnO-Ag Nanocomposite; Antimicrobial Activity against Food-borne Pathogen, Biocompatibility and Solar Photocatalysis

A simple, eco-friendly, and biomimetic approach using Thymus vulgaris (T. vulgaris) leaf extract was developed for the formation of ZnO-Ag nanocomposites (NCs) without employing any stabilizer and a chemical surfactant. T. vulgaris leaf extract was used for the first time, in a novel approach, for green fabrication of ZnO-Ag NCs as a size based reducing agent via the hydrothermal method in a single step. Presence of phenols in T. vulgaris leaf extract has served as both reducing and capping agents that play a critical role in the production of ZnO-Ag NCs. The effect of silver nitrate concentration in the formation of ZnO-Ag NCs was studied. The in-vitro Antimicrobial activity of NCs displayed high antimicrobial potency on selective gram negative and positive foodborne pathogens. Antioxidant activity of ZnO-Ag NCs was evaluated via (2,2-diphenyl-1-picrylhydrazyl) DPPH method. Photocatalytic performance of ZnO-Ag NCs was appraised by degradation of phenol under natural sunlight, which exhibited efficient photocatalytic activity on phenol. Cytotoxicity of the NCs was evaluated using the haemolysis assay. Results of this study reveal that T. vulgaris leaf extract, containing phytochemicals, possess reducing property for ZnO-Ag NCs fabrication and the obtained ZnO-Ag NCs could be employed effectively for biological applications in food science. Therefore, the present study offers a promising way to achieve high-efficiency photocatalysis based on the hybrid structure of semiconductor/metal.

Surface functionalization of electrospun PAN nanofibers with ZnO-Ag heterostructure nanoparticles: synthesis and antibacterial study

In this work, we have prepared polyacrylonitrile (PAN) polymer nanofibers by electrospinning method. The surface of the electrospun PAN nanofibers membrane has been functionalized with ZnO-Ag heterostructure nanoparticles by using three different chemical pathways such as reflux, blending, hydrothermal methods and accordingly the prepared composite nanofibers membranes were named as PAN/ZnO-Ag (R), PAN/ZnO-Ag (B) and PAN/ZnO-Ag (H) respectively. The obtained heterostructure nanoparticles functionalized PAN nanofibers membranes were characterized using ATR-FTIR, XRD, FESEM and TEM analytical techniques. From the FESEM and TEM images it was clearly observed that 20-30 nm size spherical nanoparticles have been decorated uniformly on the surface of PAN nanofibers. XRD study confirmed the formation of ZnO-Ag mixed/hybrid nanoparticles on PAN nanofibers surface. The ZnO-Ag heterostructure nanoparticles functionalized PAN nanofibers membranes were used for antibacterial application. It was observed from inhibition zone study that the ZnO-Ag heterostructure nanoparticles functionalized PAN nanofibers membrane shows excellent antibacterial properties towards both gram-negative Escherichia coli and gram-positive Micrococcus luteus bacteria than their single component counterparts. Thus this study demonstrated the simple and cost-effective approach to develop antibacterial functional membrane that has many potential applications in water and air filtration, protective mask, textile and packaging industries.

Novel Antibacterials: Alternatives to Traditional Antibiotics

With the advent of the global antimicrobial resistance (AMR) crisis, our arsenal of effective antibiotics is diminishing. The widespread use and misuse of antibiotics in human and veterinary medicine, compounded by the lack of novel classes of antibiotic in the pharmaceutical pipeline, has left a hole in our antibiotic armamentarium. Thus, alternatives to traditional antibiotics are being investigated, including two major groups of antibacterial agents, which have been extensively studied, phytochemicals and metals. Within these groups, there are several subclasses of compound/elements, including polyphenols and metal nanoparticles, which could be used to complement traditional antibiotics, either to increase their potency or extend their spectrum of activity. Alone or in combination, these antibacterial agents have been shown to be effective against a vast array of human and animal bacterial pathogens, including those resistant to licensed antibacterials. These alternative antibacterial agents could be a key element in our fight against AMR and provide desperately needed options, to veterinary and medical clinicians alike.

Toxicity effects of AgZnO nanoparticles and rifampicin on Mycobacterium tuberculosis into the macrophage

The World Health Organization acknowledges tuberculosis as a global threat. Tuberculosis infection is one of the top 10 causes of death worldwide. Nanotechnology and microbiology researchers are looking for new and safe nano drugs for eliminating Mycobacterium tuberculosis, the causative agent of tuberculosis. In this study, AgZnO nano-crystals (AgZnONCs) is synthesized via the decomposition of the precursor of oxalate method. Characterization of AgZnONCs were evaluated. Next, various concentrations of AgZnONCs, as well AgZnONCs+Rifampicin, were prepared. The MTT assay was employed to study the viability of human macrophage cell lines (THP-1) exposed to AgZnONCs. The bactericidal effects of AgZnONCs and AgZnONCs+Rifampicin were studied by Minimum Bactericidal Concentration (MBC) test. Subsequently, THP-1 were infected by H₃₇ Rv strain of M. tuberculosis (H₃₇ RvMtb). Also, bactericidal effects of AgZnONCs and AgZnONCs+Rifampicin were compared with ex-vivo conditions. The MBC of AgZnONCs and AgZnONCs+Rifampicin were ratios of 1:4 and 1:32 respectively (p-value <0.05). Also, more than 50% and 80% of THP-1 were alive in ratios of 1:4 and 1:32 in the presence of AgZnONCs, respectively. All phagocytic H₃₇ RvMtb were killed in the presence of AgZnONCs+Rifampicin (p-value <0.05), while AgZnONCs were not able to kill all the H₃₇ RvMtb (p-value >0.05). This study showed that, AgZnONCs+Rifampicin has the most anti-tubercular behavior with respect to the macrophages.

Role of silver doping on the defects related photoluminescence and antibacterial behaviour of zinc oxide nanoparticles

The Ag doped ZnO (ZnO:Ag) NPs with a hexagonal wurtzite structure were synthesized by a solution combustion method. X-ray absorption near edge structure (XANES) and X-ray photoelectron spectroscopy (XPS) were used to study the defects, local electronic and atomic structures before and after Ag doping. XPS and XANES studies confirmed the deficiency of concentration of defects in ZnO after Ag doping. The photoluminescence study showed the deep level emission in the orange-red region in addition to the band to band emission. It was also found that the defect related emission of ZnO was decreased with an increasing in Ag concentration. The antibacterial behaviour of ZnO and ZnO:Ag NPs was studied against the gram positive and gram negative bacteria. The role of Ag doping and defects in the ZnO NPs were discussed for the observed antibacterial and photoluminescence behaviour.