Reusability of brilliant green dye contaminated wastewater using corncob biochar and Brevibacillus parabrevis: hybrid treatment and kinetic studies

Food grade plastics and Bisphenol A: Associated risks, toxicity, and bioremediation approaches

Bisphenols' widespread use in day to day life has enabled its existence in various compartments of the environment. Bisphenol A (BPA) is utilized as a monomer in manufacturing polycarbonate plastics, epoxy resins, as well as flame retardants and is also considered as an endocrine disruptor. This study focuses on determining BPA concentration in daily-use food-grade plastic containers, in addition to its toxicity evaluation in environmental samples contaminated by BPA leachates. The highest concentration of BPA was observed in black poly bags (42.78 ppm), followed by slice juice bottles and infant milk bottles. Toxicity tests revealed significant impacts on Rhizobium and Chlorella sp. as a representative species of soil and aquatic environment respectively. To biodegrade the BPA, two potential strains, Brucella sp. and Brevibacillus parabrevis, were isolated from a landfill site. Qualitative and quantitative evaluation of biodegraded BPA through U-HPLC and GC-MSMS showed various metabolites of BPA. Results indicate the native bacterial isolates as potential candidates for BPA degradation while transforming this contaminant to a less toxic and hazardous form. The study also proposes the risk associated with food-grade plastic containers and recommends to establish a sustainable way for plastic waste management.

Mechanism of deltamethrin biodegradation by Brevibacillus parabrevis BCP-09 with proteomic methods

Ester-containing deltamethrin pesticides are widely used in farmland and have inevitable side effects on the biosphere and human health. Microbia have been used for efficient degradation of deltamethrin, but the related mechanism and enzyme characteristics have not been elucidated. In this study, a species Brevibacillus parabrevis BCP-09 could degrade up to 75 mg L-1 deltamethrin with a degradation efficiency of 95.41%. Proteomic and genomic methods were used to explore its degradation mechanism. Enzymes belonged to hydrolases, oxidases and aromatic compound degrading enzymes were expressed enhanced and might participate in the deltamethrin degradtion. RT-PCR experiment and enzyme activity analysis verified the degradation of deltamethrin by bacterial protein. Additionally, the formation of endospores can help strain BCP-09 resist the toxicity of deltamethrin and enhance its degradation. This study supplies a scientific evidence for the application of Brevibacillus parabrevis BCP-09 in the bioremediation of environmental pollution and enriches the resources of deltamethrin-biodegradable proteins.

3D kaolinite/g-C3N4-alginate beads as an affordable and sustainable photocatalyst for wastewater remediation

Graphitic carbon nitride (GCN) is an efficient visible-light-driven metal-free semiconductor with superior photocatalytic activity. However, the main drawbacks of GCN include lower adsorption capacity, poor reusability and recoverability. To address these drawbacks, kaolinite/g-C3N4-alginate beads were fabricated using a cross-linking method to remove brilliant green dye from wastewater via photocatalysis. The characterization studies proved the alginate's potential capability in altering photocatalyst bandgap (2.78 to 2.55 eV) and minimizing recombination of electron-hole pairs. Kaolinite/g-C3N4-alginate photocatalyst removed 97 % of brilliant green (10 mg/L) in 90 min under visible light irradiation. The superior performance of the kaolinite/g-C3N4-alginate beads was ascribed to its improved adsorption and effective utilization of visible light. The key advantages of kaolinite/g-C3N4-alginate beads were their quick recovery and extended reusability upto ten cycles. The sustainability metrics analysis of kaolinite/g-C3N4-alginate beads confirmed the environmental suitability and practicability in wastewater remediation. This study provides new insights into the low-cost and sustainable preparation of highly reusable g-C3N4-based photocatalysts for environmental remediation.

Application of Artificial Intelligence in the Management of Drinking Water: A Narrative Review

Waterborne illnesses are a significant concern worldwide. The management of water resources can be facilitated by artificial intelligence (AI) with the help of data analytics, regression models, and algorithms. Achieving the Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development of the United Nations depends on understanding, communicating, and measuring the value of water and incorporating it into decision-making. Various barriers are used from the source to the consumer to prevent microbiological contamination of drinking water sources or reduce contamination to levels safe for human health. Infrastructure development and capacity-building policies should be integrated with guidelines on applying AI to problems relating to water to ensure good development outcomes. Communities can live healthily with such technology if they can provide clean, economical, and sustainable water to the ecosystem as a whole. Quick and accurate identification of waterborne pathogens in drinking and recreational water sources is essential for treating and controlling the spread of water-related diseases, especially in resource-constrained situations. To ensure successful development outcomes, policies on infrastructure development and capacity building should be combined with those on applying AI to water-related problems. The primary focus of this study is the use of AI in managing drinking water and preventing waterborne illness.

Facile synthesis of MgO nanoparticles for effective degradation of organic dyes

In the present study, we have synthesized magnesium oxide (MgO) nanoparticles by a facile and cost-effective chemical co-precipitation method with annealing at three different temperatures (350°C, 450°C, and 550°C) for the removal of various organic dyes. X-ray diffraction studies revealed that the prepared samples are having sizes below 20 nm and with pure phase. Phase transformation of hexagonal Mg(OH)₂ nanoparticles to discretely cubical structured MgO nanoparticles has been observed with increasing the annealing temperatures which is also supported by the TGA/DSC analysis. Mg-O stretching vibration peaks in the range of 400-800 cm^-1 obtained by FTIR spectroscopy support the formation of MgO nanoparticles. The observed Raman active bands for the annealed sample at 550°C confirm the formation of the nanocrystalline phase since these bands are typically absent in the bulk MgO as well as in Mg(OH)₂. The surface morphology of the as-prepared Mg(OH)₂ are aggregated nano-petals which changed into spherical shape for MgO annealed at 550°C as studied by field emission scanning electron microscopy (FESEM). The specific surface area of MgO nanoparticles annealed at 550°C using BET isotherms is found to be 37.487 m²g^-1. The optical bandgaps of the prepared samples are found to be in the range of 4.4 to 5.1 eV using the Tauc plot. Adsorption studies with a variation of initial brilliant green dye concentration and contact time are carried out along with the studies of adsorption kinetic and isotherm models. Langmuir isotherm model is the most suitable model on the basis of correlation constant with maximum BG dye adsorption capacity onto MgO@550°C which is found to be 63.9 mg/g. The adsorption kinetics followed the pseudo-second-order model. Also prepared pristine MgO nanoparticles showed significant photocatalytic performance for the degradation of various dyes; brilliant green (BG: 88.91%), methylene blue (MB: 79.05%), crystal violet (CV: 76.49%), methyl orange (MO: 68.62%), and brilliant blue (BB: 40.44%) under visible irradiation. MgO nanoparticles could be a promising adsorbent and photocatalyst that may be employed in the treatment of effluents from industries.

Biowaste-Derived, Highly Efficient, Reusable Carbon Nanospheres for Speedy Removal of Organic Dyes from Aqueous Solutions

The current work explores the adsorptive efficiency of carbon nanospheres (CNSs) derived from oil palm leaves (OPL) that are a source of biowaste. CNSs were synthesized at 400, 600, 800 and 1000 °C, and those obtained at 1000 °C demonstrated maximum removal efficiency of ~91% for malachite green (MG). Physicochemical and microscopic characteristics were analysed by FESEM, TEM, FTIR, Raman, TGA and XPS studies. The presence of surface oxygen sites and the porosity of CNSs synergistically influenced the speed of removal of MG, brilliant green (BG) and Congo red (CR) dyes. With a minimal adsorbent dosage (1 mg) and minimum contact time (10 min), and under different pH conditions, adsorption was efficient and cost-effective (nearly 99, 91 and 88% for BG, MG and CR, respectively). The maximum adsorption capacities of OPL-based CNSs for BG were 500 and 104.16 mg/g for MG and 25.77 mg/g for CR. Adsorption isotherms (Freundlich, Langmuir and Temkin) and kinetics models (pseudo-first-order, pseudo-second-order and Elovich) for the adsorption processes of all three dyes on the CNSs were explored in detail. BG and CR adsorption the Freundlich isotherm best, while MG showed a best fit to the Temkin model. Adsorption kinetics of all three dyes followed a pseudo-second-order model. A reusability study was conducted to evaluate the effectiveness of CNSs in removing the MG dye and showed ~92% efficiency even after several cycles. Highly efficient CNSs with surface oxygen groups and speedy removal of organic dyes within 10 min by CNSs are highlighted in this paper.

Removal of dyes (BG, MG, and SA) from aqueous solution using a novel adsorbent macrocyclic compound

The use of macrocyclic compounds to remove organic dyes is fascinating because they have a wide surface area range and can be used for different things. new (14E, 34E)-7-Hydroxy-7, 8, 22, 23, 24, 25, 26, 27-Octahydro-6H, 16H, 33H Tetrabenzo[f,k,u,z][1,5,13,20]Tetraoxacycloheptacosine-16,33-Dione (HOTTD) was obtained by a simple high-dilution method, and characterized by FTIR, 1H-NMR, FESEM, EDX, and XRD. It worked well in removing organic dyes from aqueous solutions. Contact time, pH, dosage, initial concentration and temperature were studied. The optimum conditions were achieved by using 20 mg/L dye concentration, 50 mg dose of adsorbent and pH 9.0 at room temperature. The adsorption process was remarkably fast and reached equilibrium within 10 min for both Brilliant Green and Malachite Green while 70 min for Safranin. The batch adsorption experiments followed a pseudo 2nd order and Langmuir model with maximum adsorption capacity 19.26 mg/g, 18.28 mg/g, and 14.35 mg/g for Brilliant Green, Malachite green and Safranin respectively. The process was endothermic and spontaneous in nature. Adsorbent regeneration test provides an excellent value 5 times.

A holistic overview on corn cob biochar: A mini-review

Corn cob is one of the agricultural waste materials subjected to improper burning, which creates pollution. It can be used for the production of green technologies for further applications. Carbonisation or slow pyrolysis could be promising alternative to burning. It has many applications, such as soil ameliorant, waste water treatment, carbon sequestration, composting, supercapacitor, fuel cell and biocomposites material. It motivated to investigate the suitability of corn cob as a potential material for biochar production and its application. The advanced form of analysis, such as thermogravimetric, scanning electron microscopy, surface area, Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and Raman spectroscopy, is elaborated for in-depth knowledge of characteristics. The hypothesis is that if the available corn cob is used for biochar production, it will reduce the carbon dioxide (CO₂) emission. On a global level, conversion of available corn cob into biochar is expected to reduce CO₂ emission by 0.13 Gt per year. The reduction in CO₂ emission also favours economy. If 1 tonne of biomass per year is converted into biochar, 0.82 tonnes of CO₂ can be reduced per year and by considering the emission cost of Rs 1800 per tonne, the cost saving would be Rs 1476 per year. The presented mini-review article provides an outline of the state-of-art information on corn cob biochar and its novel application. It will be helpful to scientific domain to find new opportunities in biochar research and also the humanity will be benefitted due to reduction in greenhouse gases.

Removal of Reactive Black 5 Dye by Banana Peel Biochar and Evaluation of Its Phytotoxicity on Tomato

Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.

Plant microbe based remediation approaches in dye removal: A review

Increased industrialization demand using synthetic dyes in the newspaper, cosmetics, textiles, food, and leather industries. As a consequence, harmful chemicals from dye industries are released into water reservoirs with numerous structural components of synthetic dyes, which are hazardous to the ecosystem, plants and humans. The discharge of synthetic dye into various aquatic environments has a detrimental effect on the balance and integrity of ecological systems. Moreover, numerous inorganic dyes exhibit tolerance to degradation and repair by natural and conventional processes. So, the present condition requires the development of efficient and effective waste management systems that do not exacerbate environmental stress or endanger other living forms. Numerous biological systems, including microbes and plants, have been studied for their ability to metabolize dyestuffs. To minimize environmental impact, bioremediation uses endophytic bacteria, which are plant beneficial bacteria that dwell within plants and may improve plant development in both normal and stressful environments. Moreover, Phytoremediation is suitable for treating dye contaminants produced from a wide range of sources. This review article proves a comprehensive evaluation of the most frequently utilized plant and microbes as dye removal technologies from dye-containing industrial effluents. Furthermore, this study examines current existing technologies and proposes a more efficient, cost-effective method for dye removal and decolorization on a big scale. This study also aims to focus on advanced degradation techniques combined with biological approaches, well regarded as extremely effective treatments for recalcitrant wastewater, with the greatest industrial potential.

A review on biofiltration techniques: Recent advancements in the removal of volatile organic compounds and heavy metals in the treatment of polluted water

Good quality of water determines the healthy life of living beings on this earth. The cleanliness of water was interrupted by the pollutants emerging out of several human activities. Industrialization, urbanization, heavy population, and improper disposal of wastes are found to be the major reasons for the contamination of water. Globally, the inclusion of volatile organic compounds (VOCs) and heavy metals released by manufacturing industries, pharmaceuticals, and petrochemical processes have created environmental issues. The toxic nature of these pollutants has led researchers, scientists, and industries to exhibit concern towards the complete eradication of them. In this scenario, the development of wastewater treatment methodologies at low cost and in an eco-friendly way had gained importance at the international level. Recently, bio-based technologies were considered for environmental remedies. Biofiltration based works have shown a significant result for the removal of volatile organic compounds and heavy metals in the treatment of wastewater. This was done with several biological sources such as bacteria, fungi, algae, plants, yeasts, etc. The biofiltration technique is cost-effective, simple, biocompatible, sustainable, and eco-friendly compared to conventional techniques. This review article provides deep insight into biofiltration technologies engaged in the removal of volatile organic compounds and heavy metals in the wastewater treatment process.

Antibiotics: An overview on the environmental occurrence, toxicity, degradation, and removal methods

Antibiotics, as antimicrobial drugs, have been widely applied as human and veterinary medicines. Recently, many antibiotics have been detected in the environments due to their mass production, widespread use, but a lack of adequate treatment processes. The environmental occurrence of antibiotics has received worldwide attention due to their potential harm to the ecosystem and human health. Research status of antibiotics in the environment field is presented by bibliometrics. Herein, we provided a comprehensive overview on the following important issues: (1) occurrence of antibiotics in different environmental compartments, such as wastewater, surface water, and soil; (2) toxicity of antibiotics toward non-target organisms, including aquatic and terrestrial organisms; (3) current treatment technologies for the degradation and removal of antibiotics, including adsorption, hydrolysis, photodegradation and oxidation, and biodegradation. It was found that macrolides, fluoroquinolones, tetracyclines, and sulfonamides were most frequently detected in the environment. Compared to surface and groundwaters, wastewater contained a high concentration of antibiotic residues. Both antibiotics and their metabolites exhibited toxicity to non-target organisms, especially aquatic organisms (e.g., algae and fish). Fluoroquinolones, tetracyclines, and sulfonamides can be removed through abiotic process, such as adsorption, photodegradation, and oxidation. Fluoroquinolones and sulfonamides can directly undergo biodegradation. Further studies on the chronic effects of antibiotics at environmentally relevant concentrations on the ecosystem were urgently needed to fully understand the hazards of antibiotics and help the government to establish the permissible limits. Biodegradation is a promising technology; it has numerous advantages such as cost-effectiveness and environmental friendliness.

Biochar for remediation of agrochemicals and synthetic organic dyes from environmental samples: A review

Application of agrochemicals in farming sector to control insects and pests; and use of synthetic organic dyes to color the products are increasing continuously due to the rapid growth of industries. During the application process many industries releases toxic agrochemicals and dyes in to the aquatic environment and on land without the proper treatment. Due to their toxicity the disposal of such chemicals is of utmost importance. Biochar offers the ability to remediate these substances from environmental matrices because of their high sorption ability of pollutants from water and soil. This review highlights the development and advancement of biochar-based treatment for abatement of agrochemicals and synthetic organic dyes, involving its technical aspects and the variables connected with removing these kinds of pollutants. Several optimization parameters like temperature, pH, chemical concentration, biochar properties, time, and co-existing ions have been elaborated. Literature survey shows that most of the researches on biochar application have been conducted in the batch mode. Hence there is an urgent need to apply this beneficial technique for the remediation of pollutants at the larger scale in the real water and soil samples. A comprehensive summary on sorption kinetics and adsorption isotherms with regards to pollutant removal is also presented. This review also covers the cost analysis of various techniques where biochar has been used as an adsorbent. Thus this review makes an easy roadmap for the further development in biochar and biochar based composites and expansion of these demanding areas of research in biochar and their applications.

Mitigation Plan and Water Harvesting of Flashflood in Arid Rural Communities Using Modelling Approach: A Case Study in Afouna Village, Egypt

This paper aims to propose methods to mitigate the risks of flash flood events in arid rural communities with poor infrastructure. A flash flood management case study was conducted at Afouna Village in Egypt, which is characterized by an arid climate and faced a devasting flash flood in 2015. First, the flash flood was modelled and it was found that it corresponds to a 100 year return period flood that led to an almost 13 million m3 total runoff volume. A structural protection approach, using an artificial infiltration pond, was applied to mitigate the flooding risks through water harvesting and recharging the groundwater of the Moghra aquifer. In this study, a novel approach was proposed, which is substituting the low permeability silty sand (2.0 × 10−4 m/s) in the pond area with a high permeability one (9.6 × 10−3 m/s), which will enhance water harvesting and reduce direct evaporation. Modern techniques of hydrological modelling were utilized in order to achieve the optimal use, and harvesting, of flash flood water.