Bioprospecting of gut microflora for plastic biodegradation

Zophobas morio versus Tenebrio molitor: Diversity in gut microbiota of larvae fed with polymers

Plastics are common synthetic materials that have been abundantly present as pollutants in natural ecosystems for the past few decades. Thus scientists have investigated the capability of plastic digestion by insects. Here we compare the effectiveness of biodegradation of the specific polymers: expanded polystyrene (EPS), polyvinyl chloride (PVC), low-density polyethylene (LDPE) and polypropylene (PP) altogether with above variants of plastics with microelements and vitamins by the mealworm - the larval form of the beetle Tenebrio molitor - and larvae of the beetle Zophobas morio, known as superworms. Z. morio beetles on all diets were able to complete their life cycle from larvae through pupae and imago, gaining 19 % and 22 % in mass on LDPE and EPS; 8 % and 7 % on PVC and PP. Mealworms (T. molitor) reared on polymers had minimal weight gain, gaining 2 % on LDPE and EPS, and a slight reduction in mass was observed when reared on PP and PVC. Not all specimens of T. molitor were able to pupate and transform to the adult stage. The results suggest that larvae of Z. morio can eat and degrade some types of plastic compounds more effectively than T. molitor. The changes in microbial gut communities were compared between these two species. The highest mass gain for Z. morio is associated with higher diversity in gut microbia and it was more diverse than that of T. molitor. Citrobacter freundii, a bacterium recognized for its ability to degrade long-chain polymers, linear hydrocarbons and cyclic hydrocarbons, was found in the microflora of Z. morio. The results confirm that superworms can survive on polymer feed. Moreover, this diet supplemented with microelements and vitamins increases the number of bacterial species and the diversity in the microbial gut.

The piranha gut microbiome provides a selective lens into river water biodiversity

Advances in omics technologies have enabled the in-depth study of microbial communities and their metabolic profiles from all environments. Here metagenomes were sampled from piranha (Serrasalmus rhombeus) and from river water from the Rio São Benedito (Amazon Basin). Shotgun metagenome sequencing was used to explore diversity and to test whether fish microbiomes are a good proxy for river microbiome studies. The results showed that the fish microbiomes were not significantly different from the river water microbiomes at higher taxonomic ranks. However, at the genus level, fish microbiome alpha diversity decreased, and beta diversity increased. This result repeated for functional gene abundances associated with specific metabolic categories (SEED level 3). A clear delineation between water and fish was seen for beta diversity. The piranha microbiome provides a good and representative subset of its river water microbiome. Variations seen in beta biodiversity were expected and can be explained by temporal variations in the fish microbiome in response to stronger selective forces on its biodiversity. Metagenome assembled genomes construction was better from the fish samples. This study has revealed that the microbiome of a piranha tells us a lot about its river water microbiome and function.

Perspectives on Genetically Engineered Microorganisms and Their Regulation in the United States

Genetically engineered microorganisms (GEMs) represent a new paradigm in our ability to address the needs of a growing, changing world. GEMs are being used in agriculture, food production and additives, manufacturing, commodity and noncommodity products, environmental remediation, etc., with even more applications in the pipeline. Along with modern advances in genome-manipulating technologies, new manufacturing processes, markets, and attitudes are driving a boom in more products that contain or are derived from GEMs. Consequentially, researchers and developers are poised to interact with biotechnology regulatory policies that have been in effect for decades, but which are out of pace with rapidly changing scientific advances and knowledge. In the United States, biotechnology is regulated by multiple agencies with overlapping responsibilities. This poses a challenge for both developers and regulators to simultaneously allow new innovation and products into the market while also ensuring their safety and efficacy for the public and environment. This article attempts to highlight the various factors that interact between regulatory policy and development of GEMs in the United States, with perspectives from both regulators and developers. We present insights from a 2022 workshop hosted at the University of California, Berkeley that convened regulators from U.S. regulatory agencies and industry developers of various GEMs and GEM-derived products. We highlight several new biotechnologies and applications that are driving innovation in this space, and how regulatory agencies evaluate and assess these products according to current policies. Additionally, we describe recent updates to regulations that incorporate new technology and knowledge and how they can adapt further to effectively continue regulating for the future.

Ideonella sakaiensis Can Metabolize Bisphenol A as a Carbon Source

Bisphenol A and its analogues represent a significant environmental and public health hazard, particularly affecting the endocrine systems of children and newborns. Due to the growing need for non-pathogenic biodegradation microbial agents as environmentally friendly and cost-effective solutions to eliminate endocrine disruptors, this study aimed to investigate the degradation of bisphenol A by Ideonella sakaiensis, based on its currently understood unique enzymatic machinery that is already well known for degrading polyethylene terephthalate. The present study provides novel insights into the metabolic competence and growth particularities of I. sakaiensis. The growth of I. sakaiensis exposed to bisphenol A exceeded that in the control conditions, starting with 72 h in a 70% nutrient-rich medium and starting with 48 h in a 100% nutrient-rich medium. Computational modeling showed that bisphenol A, as well as its analogue bisphenol S, are possible substrates of PETase and MHETase. The use of bisphenol A as a carbon and energy source through a pure I. sakaiensis culture expands the known substrate spectra and the species' potential as a new candidate for bisphenol A bioremediation processes.

The combined rhizoremediation by a triad: plant-microorganism-functional materials

The article describes new strategies for the remediation of soils contaminated with organic and inorganic pollutants. The aim of this study is to investigate the synergistic effects of combining plant-microorganism-functional materials for a more effective reduction of soil contamination with toxic chemicals. The innovative triad involves functional materials as a habitat for microorganisms, which helps to control the release of pollutants into the soil solution from the adsorbed form. This, in turn, reduces the toxic effect on microorganisms and plants. Microorganisms play a complex role, consisting of partial biodegradation of pollutants, stimulation of plant growth, and support for nutrient supply. Plants synthesize root exudates that facilitate microorganisms in biodegrading organic pollutants and stimulate their growth. The plant takes up pollutants through the root system, which can be further supported by endophytic microorganisms. The cooperation of the three players produces a synergistic effect that enhances the effectiveness of rhizodegradation supported by functional materials, which is more effective than using microorganisms, phytoremediation, or functional materials alone. The combination of physicochemical methods (functional materials) and microbiological methods (bacteria and fungi, rhizosphere, symbiotic and non-symbiotic) supported by plants (hyperaccumulators) is a promising approach for reducing chemicals from soil. Key examples of the synergistic effects of combining plant-microorganism-functional materials have been provided in this article.

Bioengineered microbial strains for detoxification of toxic environmental pollutants

Industrialization and other anthropogenic human activities pose significant environmental risks. As a result of the hazardous pollution, numerous living organisms may suffer from undesirable diseases in their separate habitats. Bioremediation, which removes hazardous compounds from the environment using microbes or their biologically active metabolites, is one of the most successful remediation approaches. According to the United Nations Environment Program (UNEP), deteriorating soil health negatively impacts food security and human health over time. Soil health restoration is critical right now. Microbes are widely known for their importance in cleaning up toxins present in the soil, such as heavy metals, pesticides, and hydrocarbons. However, the capacity of local bacteria to digest these pollutants is limited, and the process takes an extended time. Genetically modified organisms (GMOs), whose altered metabolic pathways promote the over-secretion of a variety of proteins favorable to the bioremediation process, can speed up the breakdown process. The need for remediation procedures, degrees of soil contamination, site circumstances, broad adoptions, and numerous possibilities occurring at various cleaning stages are all studied in detail. Massive efforts to restore contaminated soils have also resulted in severe issues. This review focuses on the enzymatic removal of hazardous pollutants from the environment, such as pesticides, heavy metals, dyes, and plastics. There are also in-depth assessments of present discoveries and future plans for efficient enzymatic degradation of hazardous pollutants.

Computational Exploration of Bio-Degradation Patterns of Various Plastic Types

Plastic materials are recalcitrant in the open environment, surviving for longer without complete remediation. The current disposal methods of used plastic material are inefficient; consequently, plastic wastes are infiltrating the natural resources of the biosphere. The mixed composition of urban domestic waste with different plastic types makes them unfavorable for recycling; however, natural assimilation in situ is still an option to explore. In this research work, we have utilized previously published reports on the biodegradation of various plastics types and analyzed the pattern of microbial degradation. Our results demonstrate that the biodegradation of plastic material follows the chemical classification of plastic types based on their main molecular backbone. The clustering analysis of various plastic types based on their biodegradation reports has grouped them into two broad categories of C-C (non-hydrolyzable) and C-X (hydrolyzable). The C-C and C-X groups show a statistically significant difference in their biodegradation pattern at the genus level. The Bacilli class of bacteria is found to be reported more often in the C-C category, which is challenging to degrade compared to C-X. Genus enrichment analysis suggests that Pseudomonas and Bacillus from bacteria and Aspergillus and Penicillium from fungi are potential genera for the bioremediation of mixed plastic waste. The lack of uniformity in reporting the results of microbial degradation of plastic also needs to be addressed to enable productive growth in the field. Overall, the result points towards the feasibility of a microbial-based biodegradation solution for mixed plastic waste.

Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota

Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.

Synergism Between Multi-Pseudomonas and Cutinase for Biodegradation of Crude Oil-Based Derivatives

Polyethylene terephthalate (PET) as one of the main crude oil-based derivatives, produces a significant amount of waste that is difficult to degrade. Currently, microbial degradation of PET is an eco-friendly, efficient, and economical method. This study was conducted to propose a novel screening strategy for PET-degrading bacteria, and evaluate their degradation efficiency of PET. Two strains, Pseudomonas nitroreducens S8 and Pseudomonas monteilii S17, were isolated and could utilize PET as a carbon source by co-culture. The combined use of both bacteria gave a synergistic effect on the disruption of the PET surface through colonization behavior, which could enhance the subsequent degradation of PET. Its time of reaching a peak value of PET degradation rate (94.5% at 6 d) was 2 days earlier than these of single bacteria. A similar synergistic effect was also observed in the metabolization of PET monomers, and the metabolic rate was expressed as 82.4% of bis (2-hydroxyethyl) terephthalate (BHET), 64.0% of mono (2-hydroxyethyl) terephthalate (MHET), and 20.0% of terephthalic acid (TPA), respectively. This study is novel in showing the degradation of PET waste by combinations of bacterial pretreatment and enzymatic treatment, which can be a promising method.

Leads and hurdles to sustainable microbial bioplastic production

Indiscriminate usage, disposal and recalcitrance of petroleum-based plastics have led to its accumulation leaving a negative impact on the environment. Bioplastics, particularly microbial bioplastics serve as an ecologically sustainable solution to nullify the negative impacts of plastics. Microbial production of biopolymers like Polyhydroxyalkanoates, Polyhydroxybutyrates and Polylactic acid using renewable feedstocks as well as industrial wastes have gained momentum in the recent years. The current study outlays types of bioplastics, their microbial sources and applications in various fields. Scientific evidence on bioplastics has suggested a unique range of applications such as industrial, agricultural and medical applications. Though diverse microorganisms such as Alcaligenes latus, Burkholderia sacchari, Micrococcus species, Lactobacillus pentosus, Bacillus sp., Pseudomonas sp., Klebsiella sp., Rhizobium sp., Enterobacter sp., Escherichia sp., Azototobacter sp., Protomonas sp., Cupriavidus sp., Halomonas sp., Saccharomyces sp., Kluyveromyces sp., and Ralstonia sp. are known to produce bioplastics, the industrial production of bioplastics is still challenging. Thus this paper also provides deep insights on the advancements made to maximise production of bioplastics using different approaches such as metabolic engineering, rDNA technologies and multitude of cultivation strategies. Finally, the constraints to microbial bioplastic production and the future directions of research are briefed. Hence the present review emphasizes on the importance of using bioplastics as a sustainable alternative to petroleum based plastic products to diminish environmental pollution.

The Bacterial and Fungal Gut Microbiota of the Greater Wax Moth, Galleria mellonella L. Consuming Polyethylene and Polystyrene

Plastic production has been increasing exponentially in the last 60 years, but plastic disposal is out of control, resulting in the pollution of all ecosystems on Earth. Finding alternative environmentally sustainable choices, such as biodegradation by insects and their associated gut microbiota, is crucial, however we have only begun to characterize these ecosystems. Some bacteria and one fungus have been previously identified in the gut of Greater Wax Moth larvae (Galleria mellonella L., Lepidoptera, Pyralidae) located mainly in the Northern hemisphere. The aim of this study was to describe changes in the gut microbiota associated with the consumption of polyethylene and polystyrene by the Greater Wax Moth in Argentina, considering both bacteria and fungi. Larvae were fed polyethylene, polystyrene and beeswax as control for 7 days. Next generation sequencing revealed changes in the bacterial gut microbiome of the wax moth larvae at the phyla and genus levels, with an increase in two Pseudomonas strains. The fungal communities showed no differences in composition between diets, only changing in relative abundance. This is the first report of both bacterial and fungal communities associated with a plastivore insect. The results are promising and call for more studies concerning a potential multi-kingdom synergy in the plastic biodegradation process.

Can polymer-degrading microorganisms solve the bottleneck of plastics' environmental challenges?

Increasing world population and industrial activities have enhanced anthropogenic pollution, plastic pollution being especially alarming. So, plastics should be recycled and/or make them biodegradable. Chemical and physical remediating methods are usually energy consuming and costly. In addition, they are not ecofriendly and usually produce toxic byproducts. Bioremediation is a proper option as it is cost-efficient and environmentally friendly. Plastic production and consumption are increasing daily, and, as a consequence, more microorganisms are exposed to these nonbiodegradable polymers. Therefore, investigating new efficient microorganisms and increasing the knowledge about their biology can pave the way for efficient and feasible plastic bioremediation processes. In this sense, omics, systems biology and bioinformatics are three important fields to analyze the biodegradation pathways in microorganisms. Based on the above-mentioned technologies, researchers can engineer microorganisms with specific desired properties to make bioremediation more efficient.

Accelerated biodegradation of polyethylene terephthalate by Thermobifida fusca cutinase mediated by Stenotrophomonas pavanii

Polyethylene terephthalate (PET) is a general plastic that produces a significant amount of waste due to its non-biodagradable properties. We obtained four bacteria (Stenotrophomonas pavanii JWG-G1, Comamonas thiooxydans CG-1, Comamonas koreensis CG-2 and Fulvimonas soli GM-1) that utilize PET as a sole carbon source through a novel stepwise screening and verification strategy. PET films pretreated with S. pavanii JWG-G1 exhibited weight loss of 91.4% following subsequent degradation by Thermobifida fusca cutinase (TfC). S. pavanii JWG-G1 was able to colonize the PET surface and maintain high cell viability (over 50%) in biofilm, accelerating PET degradation. Compared with PET films with no pretreatment, pretreatment with S. pavanii JWG-G1 caused the PET surface to be significantly rougher with greater hydrophilicity (contact angle of 86.3 ± 2° vs. 96.6 ± 2°), providing better opportunities for TfC to contact and act on PET. Our study indicates that S. pavanii JWG-G1 could be used as a novel pretreatment for efficiently accelerating PET biodegradation by TfC.

Bioengineered Microbes for Soil Health Restoration - Present Status and Future

According to the United Nations Environment Programme (UNEP), soil health is declining over the decades and it has an adverse impact on human health and food security. Hence, soil health restoration is a need of the hour. It is known that microorganisms play a vital role in remediation of soil pollutants like heavy metals, pesticides, hydrocarbons, etc. However, the indigenous microbes have a limited capacity to degrade these pollutants and it will be a slow process. Genetically modified organisms (GMOs) can catalyze the degradation process as their altered metabolic pathways lead to hypersecretions of various biomolecules that favor the bioremediation process. This review provides an overview on the application of bioengineered microorganisms for the restoration of soil health by degradation of various pollutants. It also sheds light on the challenges of using GMOs in environmental application as their introduction may affect the normal microbial community in soil. Since soil health also refers to the potential of native organisms to survive, the possible changes in the native microbial community with the introduction of GMOs are also discussed. Finally, the future prospects of using bioengineered microorganisms in environmental engineering applications to make the soil fertile and healthy have been deciphered. With the alarming rates of soil health loss, the treatment of soil and soil health restoration need to be fastened to a greater pace and the combinatorial efforts unifying GMOs, plant growth-promoting rhizobacteria, and other soil amendments will provide an effective solution to soil heath restoration ten years ahead.