Gellable silk fibroin-polyethylene sponge for hemostasis

A hemoadhican-based sponge with anti-heparin interference for treating uncontrollable massive hemorrhage

Hemoadhican (HD) is an exopolysaccharide with a branched structure that has been reported for its high hemostatic ability. In this study, a HD-based hemostatic sponge was prepared through ultrasonic dissolution and freeze-drying without using any cross-linking agent. The sponge could spontaneously cross-link using hydrogen bonds to form adhesive mud within 3 s upon contact with blood. This sponge-mud mixture adhered tightly to the wound tissue, forming a pressure-resistant physical barrier that captures and locks in blood cells and platelets. Simultaneously, the hydrophobic methyl groups of HD sponges repel blood inwardly, effectively sealing the wound. The brush-like structure of HD molecules was suspected to penetrate wet tissues through topological entanglement, thereby enhancing wet adhesion. Compared with gauze and gelatin sponges, HD sponges achieved more effective hemostasis in animal models using rat and rabbit femoral arteries. In particular, HD sponges showed excellent hemostasis in heparin-induced hemorrhage models in mice and pigs. The in vivo experiment demonstrated the excellent biosafety of the HD sponge. Conclusively, the HD sponge is a safe and efficient rapid hemostatic material that is expected to become an alternative material for clinical hemostatic procedures.

Sodium alginate/carboxycellulose/polydopamine composite microspheres for rapid hemostasis of deep irregular wounds

Hemostasis of deep irregular wounds is a severe problem in clinical practice. The development of rapid-acting hemostatic agents for deep and irregular wound is urgently needed. Here, sodium alginate/carboxycellulose/polydopamine (SA/CNF/PDA) microspheres was prepared by reverse emulsification and crosslinking with Ca2+, and SA/CNF/PDA composite hemostatic microspheres with porous structure were obtained by freeze-drying. SA/CNF/PDA composite hemostatic microspheres exhibited excellent porosity and water absorption which could rapidly absorb blood on the wound surface. Moreover, SA/CNF/PDA composite microspheres demonstrated remarkable hemostatic capabilities both in vitro and in vivo. It exhibited strong hemostatic performance in models of mouse tail-break and liver damage. Especially in liver injury model, it was completely hemostatic in 95 s, and blood loss (19.3 mg). The hemostatic efficacy of the SA/CNF/PDA composite microspheres was amplified through the stimulation of both exogenous and endogenous coagulation pathways. Therefore, SA/CNF/PDA composite hemostatic microspheres are suitable for rapid hemostasis of deep irregular wounds which are potential rapid hemostatic material for surgical application.

Recent research advances in polysaccharide-based hemostatic materials: A review

Massive bleeding resulting from civil and martial accidents can often lead to shock or even death, highlighting the critical need for the development of rapid and efficient hemostatic materials. While various types of hemostatic materials are currently utilized in clinical practice, they often come with limitations such as poor biocompatibility, toxicity, and biodegradability. Polysaccharides, such as alginate (AG), chitosan (CS), cellulose, starch, hyaluronic acid (HA), and dextran, have exhibit excellent biocompatibility and in vivo biodegradability. Their degradation products are non-toxic to surrounding tissues and can be absorbed by the body. As a result, polysaccharides have been extensively utilized in the development of hemostatic materials and have gained significant attention in the field of in vivo hemostasis. This review offers an overview of the different forms, hemostatic mechanisms, and specific applications of polysaccharides. Additionally, it discusses the future opportunities and challenges associated with polysaccharide-based hemostats.

A sodium alginate - silk fibroin biosponge loaded with thrombin: Effective hemostasis and wound healing

In trauma first aid, rapid hemostasis is a priority, extricating patients from hemorrhagic shock and infection risks. This paper explores novel hemostatic materials, using ion-crosslinking and freeze-drying techniques. Iterative experiments determined optimal conditions for the temperature-variable mixing-freeze-drying chemical reaction of sodium alginate (SA)/silk fibroin (SF). We used SA, SA/SF, SA/SF-TB and commercial hemostatic sponge control samples to perform hemostasis experiments on rat liver injury and femoral artery injury models, and to perform wound healing experiments on rat back full-layer skin. The results showed that the hemostatic time and blood loss of SA/SF-TB group rats (liver hemorrhage model: 397.17 ± 34.80 mg, 77.83 ± 7.41 s; Femoral artery bleeding model: 940.33 ± 41.93 mg, 96.83 ± 4.07 s) was significantly better than other experimental groups, and similar to the commercial group. The wound healing experiment showed that the new granulation tissue thickness of SA/SF-TB group was thicker (380.39 ± 28.56 μm) at day 14. In addition, the material properties and biocompatibility of sponges were characterized by cell experiments and in vivo embedding experiments. All the results showed that the SA/SF-TB hemostatic sponge prepared in this study could not only seal the wound quickly and stop bleeding, but also promote the growth of epidermal cells and fibroblasts and accelerate wound healing. This new material solves the shortcomings of traditional materials such as low stability, limited shelf life, high unit price, and has good biocompatibility, easy preparation, rapid hemostasis and other excellent properties. Therefore, this innovative hemostatic material has great prospects and potential in clinical applications.

Recent research advances on polysaccharide-, peptide-, and protein-based hemostatic materials: A review

Hemorrhage is a potentially life-threatening emergency that can occur at any time or place. Whether traumatic, congenital, surgical, disease-related, or drug-induced, bleeding can lead to severe complications or death. Therefore, the development of efficient hemostatic materials is critical. However, the results and prognosis demonstrated by clinical means of hemostasis do not reach expectations. With the development of technology, novel hemostatic materials have been developed from polysaccharides (chitosan, hyaluronic acid, alginate, cellulose, cyclodextrins, starch, dextran, and carrageenan), peptides (self-assembling peptides), and proteins (silk fibroin, collagen, gelatin, keratin, and thrombin). These new materials exhibit high hemostatic efficacy due to the enhancement or interaction of various hemostatic mechanisms. The main forms include adhesives, sealants, bandages, hemostatic powders, and hemostatic sponges. This article introduces the clotting process and principles of hemostatic methods and reviews the research on polysaccharide-, peptide-, and protein-based hemostatic materials in the last five years. The design ideas and hemostatic principles of polysaccharide-, peptide-, and protein-based hemostatic materials are mainly introduced. Finally, we summarize material designs, advantages, disadvantages, and challenges regarding hemostatic materials.

Shape memory and hemostatic silk-laponite scaffold for alveolar bone regeneration after tooth extraction trauma

Persistent bleeding and the absence of alveolar bone stress following tooth loss can hinder socket healing, complicating future dental implant procedures, and potentially leading to neighboring tooth instability. Therefore, developing materials that promote alveolar bone regeneration and possess both hemostatic and osteogenic properties is crucial for preserving the extraction sites. This study introduces a silk-based laponite composite scaffold material with proficient hemostatic and osteogenic functions, and excellent shape-memory properties for efficient extraction- site filling. In vitro studies research demonstrated that the scaffold's inherent negative charge of the scaffold significantly enhanced blood coagulation and thrombin generation. Moreover, its porous structure and slightly rough inner surface promoted blood cell adhesion and, improved the hemostatic performance. Furthermore, the scaffold facilitated stem cell osteogenic differentiation by activating the TRPM7 channel through the released of magnesium ions. In vivo tests using rat models confirmed its effectiveness in promoting coagulation and mandibular regeneration. Thus, this study proposes a promising approach for post-extraction alveolar bone regenerative repair. The composite scaffold material, with its hemostatic and osteogenic capabilities and shape-memory features, can potentially enhance dental implant success and overall oral health.

Advances of regenerated and functionalized silk biomaterials and application in skin wound healing

The cocoon silk of silkworms (Bombyx mori) has multiple potential applications in biomedicine due to its good biocompatibility, mechanical properties, degradability, and plasticity. Numerous studies have confirmed that silk material dressings are more effective than traditional ones in the skin wound healing process. Silk material research has recently moved toward functionalized biomaterials and achieved remarkable results. Herein, we summarize the recent advances in functionalized silk materials and their efficacy in skin wound healing. In particular, transgenic technology has realized the specific expression of human growth factors in the silk glands of the silkworms, which lays the foundation for fabricating novel and low-cost functionalized materials. Without a green and safe preparation process, the best raw silk materials cannot be made into medically safe products. Therefore, we provide an overview of green and gentle approaches for silk degumming and silk sericin (SS) extraction. Moreover, we summarize and discuss the processing methods of silk fibroin (SF) and SS materials and their potential applications, such as burns, diabetic wounds, and other wounds. This review aims to enhance our understanding of new advances and directions in silk materials and guide future biomedical research.

Advances in haemostatic sponges: Characteristics and the underlying mechanisms for rapid haemostasis

In traumatized patients, the primary cause of mortality is uncontrollable continuous bleeding and unexpected intraoperative bleeding which is likely to increase the risk of complications and surgical failure. High expansion sponges are effective clinical practice for the treatment of wound bleeding (irregular/deep/narrow) that are caused by capillaries, veins and even arterioles as they possess a high liquid absorption ratio so can absorb blood platelets easily in comparison with traditional haemostasis treatments, which involve compression, ligation, or electrical coagulation etc. When in contact with blood, haemostatic sponges can cause platelet adhesion, aggregation, and thrombosis, preventing blood from flowing out from wounds, triggering the release of coagulation factors, causing the blood to form a stable polymerized fibre protein, forming blood clots, and achieving the goal of wound bleeding control. Haemostatic sponges are found in a variety of shapes and sizes. The aim of this review is to facilitate an overview of recent research around haemostatic sponge materials, products, and technology. This paper reviews the synthesis, properties, and characteristics of haemostatic sponges, together with the haemostasis mechanisms of haemostatic sponges (composite materials), such as chitosan, cellulose, gelatin, starch, graphene oxide, hyaluronic acid, alginate, polyethylene glycol, silk fibroin, synthetic polymers silver nanoparticles, zinc oxide nanoparticles, mesoporous silica nanoparticles, and silica nanoparticles. Also, this paper reviews commercial sponges and their properties. In addition to this, we discuss various in-vitro/in-vivo approaches for the evaluation of the effect of sponges on haemostasis.

An All-In-One Transient Theranostic Platform for Intelligent Management of Hemorrhage

Developing theranostic devices to detect bleeding and effectively control hemorrhage in the prehospital setting is an unmet medical need. Herein, an all-in-one theranostic platform is presented, which is constructed by sandwiching silk fibroin (SF) between two silver nanowire (AgNW) based conductive electrodes to non-enzymatically diagnose local bleeding and stop the hemorrhage at the wound site. Taking advantage of the hemostatic property of natural SF, the device is composed of a shape-memory SF sponge, facilitating blood clotting, with ≈82% reduction in hemostatic time in vitro as compared with untreated blood. Furthermore, this sandwiched platform serves as a capacitive sensor that can detect bleeding and differentiate between blood and other body fluids (i.e., serum and water) via capacitance change. In addition, the AgNW electrode endows anti-infection efficiency against Escherichia coli and Staphylococcus aureus. Also, the device shows excellent biocompatibility and gradually biodegrades in vivo with no major local or systemic inflammatory responses. More importantly, the theranostic platform presents considerable hemostatic efficacy comparable with a commercial hemostat, Dengen, in rat liver bleeding models. The theranostic platform provides an unexplored strategy for the intelligent management of hemorrhage, with the potential to significantly improve patients' well-being through the integration of diagnostic and therapeutic capabilities.

A Comprehensive Review on Silk Fibroin as a Persuasive Biomaterial for Bone Tissue Engineering

Bone tissue engineering (BTE) utilizes a special mix of scaffolds, cells, and bioactive factors to regulate the microenvironment of bone regeneration and form a three-dimensional bone simulation structure to regenerate bone tissue. Silk fibroin (SF) is perhaps the most encouraging material for BTE given its tunable mechanical properties, controllable biodegradability, and excellent biocompatibility. Numerous studies have confirmed the significance of SF for stimulating bone formation. In this review, we start by introducing the structure and characteristics of SF. After that, the immunological mechanism of SF for osteogenesis is summarized, and various forms of SF biomaterials and the latest development prospects of SF in BTE are emphatically introduced. Biomaterials based on SF have great potential in bone tissue engineering, and this review will serve as a resource for future design and research.

Antibacterial quaternary ammonium chitosan/carboxymethyl starch/alginate sponges with enhanced hemostatic property for the prevention of dry socket

Tooth extraction commonly leads to postoperative wound bleeding, bacterial infection, and even the occurrence of dry socket. Therefore, developing a biomedical material with favorable antibacterial and excellent hemostatic properties to prevent the post-extraction dry socket is necessary. Herein, quaternary ammonium chitosan/ carboxymethyl starch/alginate (ACQ) sponges are developed via Ca²⁺ cross-linking, electrostatic interaction, and lyophilization methods. The results show that the bio-multifunctional sponges exhibit interconnected porous structures with significant fluid absorption rates and suitable water vapor transmission rates. In vitro cellular and hemolysis experiments indicate that the developed sponges have acceptable biocompatibility. Notably, the constructed sponges effectively inhibit the growth of E. coli, S. aureus, and C. albicans, as well as achieve rapid hemostasis in the mouse liver injury and mini-pig tooth extraction models by absorbing blood and promoting red blood cell adhesion. Thus, the created bio-multifunctional sponges show tremendous promise as a hemostatic material for wound management after tooth extraction.

Surface-fill H2S-releasing silk fibroin hydrogel for brain repair through the repression of neuronal pyroptosis

Traumatic brain injury (TBI) remains the major cause of disability and mortality worldwide due to the persistent neuroinflammation and neuronal death induced by TBI. Among them, pyroptosis, a specific type of programmed cell death (PCD) triggered by inflammatory signals, plays a significant part in the pathological process after TBI. Inhibition of neuroinflammation and pyroptosis is considered a possible strategy for the treatment of TBI. In our previous study, exogenous hydrogen sulfide(H₂S) exerted a neuroprotective effect after TBI. Here, we developed a surface-fill H₂S-releasing silk fibroin (SF) hydrogel (H₂S@SF hydrogel) to achieve small-dose local administration and avoid volatile and toxic side effects. We used a controlled cortical impact (CCI) to establish a mild TBI model in mice to examine the effect of H₂S@SF hydrogel on TBI-induced pyroptosis. We found that H₂S@SF hydrogel inhibited the expression of H₂S synthase in neurons after TBI and significantly inhibited TBI-induced neuronal pyroptosis. In addition, immunofluorescence staining results showed that the necroptosis protein receptor-interacting serine/threonine-protein kinase 1 (RIPK1) partially colocalized with the pyroptosis protein Gasdermin D (GSDMD) in the same cells. H₂S@SF hydrogel can also inhibit the expression of the necroptosis protein. Moreover, H₂S@SF hydrogel also alleviates brain edema and the degree of neurodegeneration in the acute phase of TBI. The neuroprotective effect of H₂S@SF hydrogel was further confirmed by wire-grip test, open field test, Morris water maze, beam balance test, radial arm maze, tail suspension, and forced swimming test. Lastly, we also measured spared tissue volume, reactive astrocytes and activated microglia to demonstrate H₂S@SF hydrogel impacts on long-term prognosis in TBI. Our study provides a new theoretical basis for the treatment of H₂S after TBI and the clinical application of H₂S@SF hydrogel. STATEMENT OF SIGNIFICANCE: Silk fibroin (SF) hydrogel controls the release of hydrogen sulfide (H₂S) to inhibit neuronal pyroptosis and neuroinflammation in injured brain tissue. In this study, we synthesized a surface-fill H₂S-releasing silk fibroin hydrogel, which could slowly release H₂S to reshape the homeostasis of endogenous H₂S in injured neurons and inhibit neuronal pyroptosis in a mouse model of traumatic brain injury. Meanwhile, H₂S@SF hydrogel could alleviate brain edema and the degree of neurodegeneration, improve motor dysfunction, anxious behavior and memory impairment caused by TBI, reduce tissue loss and ameliorate neuroinflammation. Our study provides a new theoretical basis for the treatment of H₂S after TBI and the clinical application of H₂S@SF hydrogel.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

•

Biopolymers possess sound biocompatibility, biodegradability and bioactivity for the design of hemostatic materials.

•

Molecular structure designs including component and chemical modification are summarized from a microscopic perspective.

•

Design of various forms of hemostatic materials is discussed and compared synthetically from a macroscopic perspective.

Recent advances in biopolymer-based hemostatic materials

Hemorrhage is the leading cause of trauma-related deaths, in hospital and pre-hospital settings. Hemostasis is a complex mechanism that involves a cascade of clotting factors and proteins that result in the formation of a strong clot. In certain surgical and emergency situations, hemostatic agents are needed to achieve faster blood coagulation to prevent the patient from experiencing a severe hemorrhagic shock. Therefore, it is critical to consider appropriate materials and designs for hemostatic agents. Many materials have been fabricated as hemostatic agents, including synthetic and naturally derived polymers. However, compared to synthetic polymers, natural polymers or biopolymers, which include polysaccharides and polypeptides, have greater biocompatibility, biodegradability, and processibility. Thus, in this review, we focus on biopolymer-based hemostatic agents of different forms, such as powder, particles, sponges, and hydrogels. Finally, we discuss biopolymer-based hemostats currently in clinical trials and offer insight into next-generation hemostats for clinical translation.

Borrowing the Features of Biopolymers for Emerging Wound Healing Dressings: A Review

Wound dressing design is a dynamic and rapidly growing field of the medical wound-care market worldwide. Advances in technology have resulted in the development of a wide range of wound dressings that treat different types of wounds by targeting the four phases of healing. The ideal wound dressing should perform rapid healing; preserve the body’s water content; be oxygen permeable, non-adherent on the wound and hypoallergenic; and provide a barrier against external contaminants—at a reasonable cost and with minimal inconvenience to the patient. Therefore, choosing the best dressing should be based on what the wound needs and what the dressing does to achieve complete regeneration and restoration of the skin’s structure and function. Biopolymers, such as alginate (ALG), chitosan (Cs), collagen (Col), hyaluronic acid (HA) and silk fibroin (SF), are extensively used in wound management due to their biocompatibility, biodegradability and similarity to macromolecules recognized by the human body. However, most of the formulations based on biopolymers still show various issues; thus, strategies to combine them with molecular biology approaches represent the future of wound healing. Therefore, this article provides an overview of biopolymers’ roles in wound physiology as a perspective on the development of a new generation of enhanced, naturally inspired, smart wound dressings based on blood products, stem cells and growth factors.

Silk Fibroin Hydrogels Could Be Therapeutic Biomaterials for Neurological Diseases

Silk fibroin, a natural macromolecular protein without physiological activity, has been widely used in different fields, such as the regeneration of bones, cartilage, nerves, and other tissues. Due to irrevocable neuronal injury, the treatment and prognosis of neurological diseases need to be investigated. Despite attempts to propel neuroprotective therapeutic approaches, numerous attempts to translate effective therapies for brain disease have been largely unsuccessful. As a good candidate for biomedical applications, hydrogels based on silk fibroin effectively amplify their advantages. The ability of nerve tissue regeneration, inflammation regulation, the slow release of drugs, antioxidative stress, regulation of cell death, and hemostasis could lead to a new approach to treating neurological disorders. In this review, we introduced the preparation of SF hydrogels and then delineated the probable mechanism of silk fibroin in the treatment of neurological diseases. Finally, we showed the application of silk fibroin in neurological diseases.

Silk Fibroin-Based Biomaterials for Hemostatic Applications

Hemostasis plays an essential role in all surgical procedures. Uncontrolled hemorrhage is the primary cause of death during surgeries, and effective blood loss control can significantly reduce mortality. For modern surgeons to select the right agent at the right time, they must understand the mechanisms of action, the effectiveness, and the possible adverse effects of each agent. Over the past decade, various hemostatic agents have grown intensely. These agents vary from absorbable topical hemostats, including collagen, gelatins, microfibrillar, and regenerated oxidized cellulose, to biologically active topical hemostats such as thrombin, biological adhesives, and other combined agents. Commercially available products have since expanded to include topical hemostats, surgical sealants, and adhesives. Silk is a natural protein consisting of fibroin and sericin. Silk fibroin (SF), derived from silkworm Bombyx mori, is a fibrous protein that has been used mostly in fashion textiles and surgical sutures. Additionally, SF has been widely applied as a potential biomaterial in several biomedical and biotechnological fields. Furthermore, SF has been employed as a hemostatic agent in several studies. In this review, we summarize the several morphologic forms of SF and the latest technological advances on the use of SF-based hemostatic agents.

Biomaterials for Hemostasis

Uncontrolled bleeding is a major problem in trauma and emergency medicine. While materials for trauma applications would certainly find utility in traditional surgical settings, the unique environment of emergency medicine introduces additional design considerations, including the need for materials that are easily deployed in austere environments. Ideally, these materials would be available off the shelf, could be easily transported, and would be able to be stored at room temperature for some amount of time. Both natural and synthetic materials have been explored for the development of hemostatic materials. This review article provides an overview of classes of materials used for topical hemostats and newer developments in the area of injectable hemostats for use in emergency medicine. Expected final online publication date for the Annual Review of Biomedical Engineering, Volume 24 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Developing photothermal-responsive and anti-oxidative silk/dopamine nanoparticles decorated with drugs which were incorporated into silk films as a depot-based drug delivery

Photothermal-responsive (PTR) and anti-oxidative silk fibroin/dopamine nanoparticles (SD NPs) mediated by tyrosinase were produced, and decorated either by curcumin or albumin (BSA) to produce SD/curcumin or SD/BSA NPs as drug delivery vehicles, respectively. Both drug loaded NPs were further blended into SF solutions to produce SD films, as a depot-based drug delivery. The reaction mechanisms for producing new SD NPs were proposed. Anti-oxidative activities for SD NPs were examined by H₂O₂ scavenge capacities of NPs. NPs were not cytotoxic at concentration of 1000μg/mL. Moreover, heparin was coated to SD films to produce SDH films for temporary implants. Cumulative release profiles for drugs loaded SDH films showed fast releases and then sustained releases stages. Furthermore, the releases of curcumin in sustained stages for varying SD/curcumin NPs loaded into SDH films were dependent on amounts of NPs. BSA releases profiles for SD/BSA NPs loaded into SDH films were similar to those profiles for the films carried with SD/curcumin NPs but release periods of BSA were short. Degrees of PTR effects with irradiation of near infrared on the releases of two drugs loaded films were different. Blood clot at wound areas of rats with SDH films implantations was not found for 24 h study.

Sustained Release of Insulin-Like Growth Factor-1 from Bombyx mori L. Silk Fibroin Delivery for Diabetic Wound Therapy

The goals of this study are to develop a high purity patented silk fibroin (SF) film and test its suitability to be used as a slow-release delivery for insulin-like growth factor-1 (IGF-1). The release rate of the SF film delivering IGF-1 followed zero-order kinetics as determined via the Ritger and Peppas equation. The release rate constant was identified as 0.11, 0.23, and 0.09% h^-1 at 37 °C for SF films loaded with 0.65, 6.5, and 65 pmol IGF-1, respectively. More importantly, the IGF-1 activity was preserved for more than 30 days when complexed with the SF film. We show that the IGF-1-loaded SF films significantly accelerated wound healing in vitro (BALB/3T3) and in vivo (diabetic mice), compared with wounds treated with free IGF-1 and an IGF-1-loaded hydrocolloid dressing. This was evidenced by a six-fold increase in the granulation tissue area in the IGF-1-loaded SF film treatment group compared to that of the PBS control group. Western blotting analysis also demonstrated that IGF-1 receptor (IGF1R) phosphorylation in diabetic wounds increased more significantly in the IGF-1-loaded SF films group than in other experimental groups. Our results suggest that IGF-1 sustained release from SF films promotes wound healing through continuously activating the IGF1R pathway, leading to the enhancement of both wound re-epithelialization and granulation tissue formation in diabetic mice. Collectively, these data indicate that SF films have considerable potential to be used as a wound dressing material for long-term IGF-1 delivery for diabetic wound therapy.

Application of an ultrasound semi-quantitative assessment in the degradation of silk fibroin scaffolds in vivo

BACKGROUND

Research on the degradation of silk fibroin (SF) scaffolds in vivo lacks uniform and effective standards and experimental evaluation methods. This study aims to evaluate the application of ultrasound in assessing the degradation of SF scaffolds.

METHODS

Two groups of three-dimensional regenerated SF scaffolds (3D RSFs) were implanted subcutaneously into the backs of Sprague-Dawley rats. B-mode ultrasound and hematoxylin and eosin (HE) staining were performed on days 3, 7, 14, 28, 56, 84, 112, 140, and 196. The cross-sectional areas for two groups of 3D RSFs that were obtained using these methods were semi-quantitatively analyzed and compared to evaluate the biodegradation of the implanted RSFs.

RESULTS

The 3D RSFs in the SF-A group were wholly degraded at the 28th week after implantation. In contrast, the 3D RSFs in the SF-B group were completely degraded at the 16th week. Ultrasonic examination showed that the echoes of 3D RSFs in both groups gradually decreased with the increase of the implantation time. In the early stages of degradation, the echoes of the samples were higher than the echo of the muscle. In the middle of degeneration, the echoes were equal to the echo of the muscle. In the later stage, the echoes of the samples were lower than that of the muscle. The above changes in the SF-B group were earlier than those in the SF-A group. Semi-quantitative analysis of the cross-sectional areas detected using B-mode ultrasound revealed that the degradations of the two 3D RSF groups were significantly different. The degradation rate of the SF-B group was found to be higher than that of the SF-A group. This was consistent with the semi-quantitative detection results for HE staining. Regression analysis showed that the results of the B-mode ultrasound and HE staining were correlated in both groups, indicating that B-mode ultrasound is a reliable method to evaluate the SF scaffold degradation in vivo.

CONCLUSIONS

This study suggests that B-mode ultrasound can clearly display the implanted SF scaffolds non-invasively and monitor the degradation of the different SF scaffolds after implantation in living organisms in real-time.

Biomimetic hydroxyapate/polydopamine composites with good biocompatibility and efficiency for uncontrolled bleeding

Uncontrolled bleeding is thought to be the most deadly cause of pre-hospital, traffic, and military accidents death. However, the popular commercial hemostats can only realize the hemostasis of mild bleeding. Therefore, we developed polydopamine (PDA) composite materials (PMs), which applied hydroxyapatite as the parent body. The PMs were produced via lyophilization and functionalized with amino, phenol hydroxyls groups, which endowed hydrophobicity to materials. This ensured a high aggregation ability of blood cells to the PMs and they were tested to be as high as 300% compared with the negative control group. The clotting time was shortened to 79.7% compared with the usually used commercial hemostat (Celox) in the test of in vitro hemostasis. Through the results of PT and APTT tests, blood coagulation index test, and the analysis of intracellular Ca²⁺ activation, we further understood the mechanism of the hemostasis of the materials, which explained the low blood loss and quick coagulation time of the PM hemostats in detail. Besides, the low hemolysis and cytotoxicity of the PMs suggested the good biocompatibility of the hemostats, which was further proved by the regular morphology maintained by erythrocytes in the hemolysis tests. The study of nanoscale composites led the research for the methods of hemostasis.

Anti-Inflammatory Properties of Injectable Betamethasone-Loaded Tyramine-Modified Gellan Gum/Silk Fibroin Hydrogels

Rheumatoid arthritis is a rheumatic disease for which a healing treatment does not presently exist. Silk fibroin has been extensively studied for use in drug delivery systems due to its uniqueness, versatility and strong clinical track record in medicine. However, in general, natural polymeric materials are not mechanically stable enough, and have high rates of biodegradation. Thus, synthetic materials such as gellan gum can be used to produce composite structures with biological signals to promote tissue-specific interactions while providing the desired mechanical properties. In this work, we aimed to produce hydrogels of tyramine-modified gellan gum with silk fibroin (Ty–GG/SF) via horseradish peroxidase (HRP), with encapsulated betamethasone, to improve the biocompatibility and mechanical properties, and further increase therapeutic efficacy to treat rheumatoid arthritis (RA). The Ty–GG/SF hydrogels presented a β-sheet secondary structure, with gelation time around 2–5 min, good resistance to enzymatic degradation, a suitable injectability profile, viscoelastic capacity with a significant solid component and a betamethasone-controlled release profile over time. In vitro studies showed that Ty–GG/SF hydrogels did not produce a deleterious effect on cellular metabolic activity, morphology or proliferation. Furthermore, Ty–GG/SF hydrogels with encapsulated betamethasone revealed greater therapeutic efficacy than the drug applied alone. Therefore, this strategy can provide an improvement in therapeutic efficacy when compared to the traditional use of drugs for the treatment of rheumatoid arthritis.