Biosynthesized α-MnO2-based polyaniline binary composite as efficient bioanode catalyst for high-performance microbial fuel cell

Improving the power production efficiency of microbial fuel cell by using biosynthesized polyanaline coated Fe3O4 as pencil graphite anode modifier

A microbial fuel cell (MFC) is a modern, environmentally friendly, and cost-effective energy conversion technology that utilizes renewable organic waste as fuel, converting stored chemical energy into usable bioelectricity in the presence of a biocatalyst. Despite advancements in MFC technology, several challenges remain in optimizing power production efficiency, particularly regarding anode materials and modifications. In this study, low-cost biosynthesized iron oxide nanoparticles (Fe3O4 NPs) were coated with a polyaniline (PANI) conducting matrix to synthesize hybrid Fe3O4/PANI binary nanocomposites (NCs) as modified MFC anodes via an in-situ polymerization process. Characterization techniques, including UV-Vis, XRD, SEM, and FT-IR, revealed the successful synthesis of green-routed nano-scaled materials with altered optical properties after matrix coating, high crystallinity in the iron oxide phase, rougher surface morphology, and characteristic Fe-O peaks at 594 cm⁻1. Additionally, the electrochemical behavior of the prepared nano-materials was characterized by cyclic voltammetry (CV), where low ΔEp values (0.473 V) for Fe3O4/PANI NCs indicated the presence of reversible charge transfer mechanisms at the electrode surface, reflecting a high rate of electron transfer. The synthesized nanocomposite was used to modify pencil graphite anodes to construct four single-chamber MFCs: bare pencil graphite anodes, pencil graphite anodes modified with Fe3O4, PANI, and Fe3O4/PANI nanocomposites. The maximum open circuit voltage (OCV) value was 645 ± 24.50 mV, with a high power output of 424.51 ± 6.86 mW/m2 and current density of 2475.01 ± 1.23 mA m-2 produced by the Fe3O4/PANI NCs modified pencil graphite electrode, which is more than six times the efficiency in terms of power density compared to the unmodified pencil graphite electrode (PGE). These results demonstrate that the synthesized nanocomposite plays an effective and value-added role in modifying traditional carbon anode electrodes within an MFC energy conversion device system.

Electrochemical Removal of Nitrogen Compounds from a Simulated Saline Wastewater

In the last few years, many industrial sectors have generated and discharged large volumes of saline wastewater into the environment. In the present work, the electrochemical removal of nitrogen compounds from synthetic saline wastewater was investigated through a lab-scale experimental reactor. Experiments were carried out to examine the impacts of the operational parameters, such as electrolyte composition and concentration, applied current intensity, and initial ammoniacal nitrogen concentration, on the total nitrogen removal efficiency. Using NaCl as an electrolyte, the N_TOT removal was higher than Na₂SO₄ and NaClO₄; however, increasing the initial NaCl concentration over 250 mg·L^-1 resulted in no benefits for the N_TOT removal efficiency. A rise in the current intensity from 0.05 A to 0.15 A resulted in an improvement in N_TOT removal. Nevertheless, a further increase to 0.25 A led to basically no enhancement of the efficiency. A lower initial ammoniacal nitrogen concentration resulted in higher removal efficiency. The highest N_TOT removal (about 75%) was achieved after 90 min of treatment operating with a NaCl concentration of 250 mg·L^-1 at an applied current intensity of 0.15 A and with an initial ammoniacal nitrogen concentration of 13 mg·L^-1. The nitrogen degradation mechanism proposed assumes a series-parallel reaction system, with a first step in which NH₄⁺ is in equilibrium with NH₃. Moreover, the nitrogen molar balance showed that the main product of nitrogen oxidation was N₂, but NO₃^- was also detected. Collectively, electrochemical treatment is a promising approach for the removal of nitrogen compounds from impacted saline wastewater.

Study on the Changes in the Microcosmic Environment in Forward Osmosis Membranes to Reduce Membrane Resistance

Osmotic microbial fuel cells (OsMFCs) are an emerging wastewater treatment technology in bioelectricity generation, organic substrate removal, and wastewater reclamation. To address this issue, proton-conductive sites were strengthened after using the forward osmosis (FO) membrane by reducing the membrane resistance. The mechanism of improving electricity generation was attributed mainly to the unique characteristics of the membrane material and the water flux characteristics of the FO membrane. In particular, only when the concentration of catholyte was greater than 0.3 M was the membrane resistance the main contributor to the overall internal resistance. Meanwhile, through the simulation of the concentration inside the membrane, the changes in the membrane thickness direction and the phase transition of the internal structure of the membrane from the dry state (0% water content) to the expansion state (>50%water content) were analyzed, which were influenced by the water flux, further explaining the important role of the membrane’s microenvironment in reducing the membrane impedance. This further opens a novel avenue for the use of OsMFCs in practical engineering applications.

Highly efficient, bioactive, and bifunctional sorbent p-n-p visible light heterogeneous photocatalyst utilizing ultra-fine ZnS nanoparticles embedded in a polymeric nanocomposite

This study reports the successful synthesis of a ZnS@GO@Pani polymeric nanocomposite (NC) via chemical polymerization. The product was used for simultaneous photocatalytic degradation-adsorption of malachite green (MG), a carcinogenic and widely used dye. The physicochemical properties of the prepared NC were characterized by various techniques. Morphological and XRD results confirmed the fine size of ZnS nanoparticles (NPs) with an approximate mean size of 5 nm, uniformly distributed within the polymeric matrix. For comparative purposes, photocatalytic dye degradation-adsorption of this nanohybrid was explored both in the dark and under natural light. It was observed that 0.1 g of the ternary NC in MG aqueous solution (20 ppm) leads to dye adsorption within 15 minutes with an efficiency of 70% under dark conditions. Also, MG removal efficiency of up to 90% was achieved in 15 minutes under natural light owing to integrated photocatalytic degradation-adsorption mechanisms. Adsorption isotherm studies were performed considering Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) models. The results showed that the Freundlich isotherm with R 2 = 0.988 is well consistent with the experimental data. Integrated photocatalytic degradation-adsorption kinetics were modeled with pseudo-first-order (PFO) and pseudo-second-order (PSO) models where PSO with R 2 = 0.999 best fitted the data, implying the predominant role of chemical adsorption in the dye removal process. Antibacterial tests revealed superior antibacterial activity of the prepared ZnS@GO@Pani NC against both Gram-negative and Gram-positive bacteria, demonstrating the remarkable synergistic effect of ZnS NPs embedded in the GO@Pani matrix. Accordingly, the prepared NC could be regarded as a promising candidate for wastewater treatment applications. The leaching and regeneration studies also confirmed that the prepared NC is a non-toxic dye removal agent with good reusability.

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

The use of nanotechnology in bioelectrochemical systems to recover bioelectricity and metals from waste appears to be a potentially appealing alternative to existing established procedures. This trend exactly characterizes the current renewable energy production technology. Hence, this review focuses on the improvement of the anode electrode by using different functional metal oxide-conducting polymer nanocomposites to enhance microbial fuel cell (MFC) performance. Enhancement of interfacial bioelectrocatalysis between electroactive microorganisms and hierarchical porous nanocomposite materials could enhance cost-effective bioanode materials with superior bioelectrocatalytic activity for MFCs. In this review, improvement in efficiency of MFCs by using iron oxide- and manganese oxide-based polypyrrole hybrid composites as model anode modifiers was discussed. The review also extended to discussing and covering the principles, components, power density, current density, and removal efficiencies of biofuel cell systems. In addition, this research review demonstrates the application of MFCs for renewable energy generation, wastewater treatment, and metal recovery. This is due to having their own unique working principle under mild conditions and using renewable biodegradable organic matter as a direct fuel source.

Fabrication and tribological behavior of MnO2/epoxy nanocomposites

Tribology is the study of moving surfaces, and it has a variety of effects on our lives. From an economic point of view, wear is one of the most important aspects of an industry’s viability. Parts of the machine can wear out, and they need to be replaced. This is especially important for polymer-based materials. Therefore, it is important to reduce maintenance costs and improve machine reliability in a variety of engineering applications through proper material selection. The present investigation deals with the fabrication of manganese dioxide (MnO2)/epoxy nanocomposite and investigates its tribological properties. The MnO2/epoxy nanocomposites were fabricated via a solution mixing technique. The phase identification and surface morphology of the sample was examined by X-ray diffractometer and field emission scanning electron microscope, respectively. The mass density, micro-hardness, and specific wear rate data of samples revealed that the mass density, micro-hardness, and wear resistance of the samples increased with the addition of MnO2 in the epoxy matrix. The nanocomposite sample containing 0.5 wt. % MnO2 loading in the epoxy matrix shows higher density, micro-hardness, and wear resistance compared to other samples. The result also shows that with the addition of MnO2 in the epoxy matrix, the coefficient of friction of the samples is increased. The percentage reduction in specific wear rate due to the addition of 0.5 wt. % MnO2 in neat epoxy is 68.10%, whereas the percentage increase in the coefficient of friction is 19.30%. The results of the analysis of variance show the effect of adding wt. % of MnO2 in the epoxy matrix is significant in the tribological responses. The worn surface analysis shows that the fatigue wear mode seems to be the dominating mode of wear for all samples as compared to the other modes of wear. The properties of MnO2/epoxy nanocomposite data revealed that the developed material may be used in the automotive industry as a structural material, fabrication of snow sled, ball bearing housing, or plastic gear materials with adequate lubrication.

Nanoadsorbants for the Removal of Heavy Metals from Contaminated Water: Current Scenario and Future Directions

Heavy metal pollution of aquatic media has grown significantly over the past few decades. Therefore, a number of physical, chemical, biological, and electrochemical technologies are being employed to tackle this problem. However, they possess various inescapable shortcomings curbing their utilization at a commercial scale. In this regard, nanotechnology has provided efficient and cost-effective solutions for the extraction of heavy metals from water. This review will provide a detailed overview on the efficiency and applicability of various adsorbents, i.e., carbon nanotubes, graphene, silica, zero-valent iron, and magnetic nanoparticles for scavenging metallic ions. These nanoparticles exhibit potential to be used in extracting a variety of toxic metals. Recently, nanomaterial-assisted bioelectrochemical removal of heavy metals has also emerged. To that end, various nanoparticle-based electrodes are being developed, offering more efficient, cost-effective, ecofriendly, and sustainable options. In addition, the promising perspectives of nanomaterials in environmental applications are also discussed in this paper and potential directions for future works are suggested.