CMOS Electrochemical Instrumentation for Biosensor Microsystems: A Review

Modern biosensors play a critical role in healthcare and have a quickly growing commercial market. Compared to traditional optical-based sensing, electrochemical biosensors are attractive due to superior performance in response time, cost, complexity and potential for miniaturization. To address the shortcomings of traditional benchtop electrochemical instruments, in recent years, many complementary metal oxide semiconductor (CMOS) instrumentation circuits have been reported for electrochemical biosensors. This paper provides a review and analysis of CMOS electrochemical instrumentation circuits. First, important concepts in electrochemical sensing are presented from an instrumentation point of view. Then, electrochemical instrumentation circuits are organized into functional classes, and reported CMOS circuits are reviewed and analyzed to illuminate design options and performance tradeoffs. Finally, recent trends and challenges toward on-CMOS sensor integration that could enable highly miniaturized electrochemical biosensor microsystems are discussed. The information in the paper can guide next generation electrochemical sensor design.

High-throughput impedance spectroscopy biosensor array chip

Impedance spectroscopy is a powerful tool for characterizing materials that exhibit a frequency dependent behaviour to an applied electric field. This paper introduces a fully integrated multi-channel impedance extraction circuit that can both generate AC stimulus signals over a broad frequency range and also measure and digitize the real and imaginary components of the impedance response. The circuit was fabricated in a 0.5 μm complementary metal-oxide semiconductor. Tailored for cellular membrane interface characterization, the signal generator produces sinusoidal waves from 10 mHz to 10 kHz. To suit a variety of applications, the impedance extraction circuit provides a programmable current measurement range from 100 pA to 100 nA with a measured resolution of approximately 100 fA. Occupying only 0.045 mm(2) per measurement channel, the circuit is compact enough to include nearly 200 channels in a 3×3 mm(2) die area.

Protein-based electrochemical biosensor for detection of silver(I) ions

Silver(I) ions are extremely toxic to aquatic animals. Hence, monitoring of these ions in the environment is needed. The aim of the present study was to suggest a simple biosensor for silver(I) ions detection. The suggested biosensor is based on the modification of a hanging mercury drop electrode (HMDE) by the heavy metal binding protein metallothionein (MT) for silver(I) ions detection. Metallothionein accumulated for 120 s onto the HMDE surface. After rinsing the electrode, the biosensor (MT modified HMDE) was prepared prior to detection of silver(I) ions. The biosensor was immersed in a solution containing silver(I) ions. These ions were bound to the MT structure. Furthermore, the electrode was rinsed and transferred to a pure supporting electrolyte solution, in which no interference was present. Under these experimental conditions, other signals relating to heavy metals naturally occurring in MT were not detected. This phenomenon confirms the strong affinity of silver(I) ions for MT. The suggested biosensor responded well to higher silver(I) ion concentrations. The relative standard deviation for measurements of concentrations higher than 50 microM was approximately 2% (n = 8). In the case of concentrations lower than 10 microM, the relative standard deviation increased to 10% (n = 8). The detection limit (3 signal/noise) for silver(I) ions was estimated as 500 nM.

Label-Free Impedance Biosensors: Opportunities and Challenges

Impedance biosensors are a class of electrical biosensors that show promise for point-of-care and other applications due to low cost, ease of miniaturization, and label-free operation. Unlabeled DNA and protein targets can be detected by monitoring changes in surface impedance when a target molecule binds to an immobilized probe. The affinity capture step leads to challenges shared by all label-free affinity biosensors; these challenges are discussed along with others unique to impedance readout. Various possible mechanisms for impedance change upon target binding are discussed. We critically summarize accomplishments of past label-free impedance biosensors and identify areas for future research.