Silver thiolate nanoclusters as support for chiral ligands: application in heterogeneous phase asymmetric catalysis

Silver thiolate nanoclusters have been functionalized with a chiral amino alcohol ligand that has previously shown high catalytic efficiency in different asymmetric reactions. The as-developed nanostructured catalyst, which can be easily recovered by simple centrifugation, has been tested in the addition of nitromethane to aromatic aldehydes, showing the same catalytic activity as the homogeneous ligand. Moreover, it was reused for two further recycling cycles without loss of efficiency. To the best of our knowledge, this is the first example of silver nanoclusters employed as a support for chiral ligands for heterogeneous phase asymmetric catalysis.

Chiral tandem modifiers: highly efficient cinchonidine-derivative modifiers at low concentrations for the enantioselective hydrogenation of (E)-2,3-diphenylpropenoic acid over Pd/C

Chiral tandem modifiers linking two or three cinchonidine molecules at the 2′-position of the quinoline ring are highly effective at low concentrations for the enantioselective hydrogenation of PCA over Pd/C.

Preparation and Asymmetric Induction Evaluation of the First Ephedrine-Based Ligands Immobilized on Magnetic Nanoparticles

Herein, the synthesis and catalytic activity of two ephedrine-based catalysts and two ephedrine-based magnetic nanoparticle-supported catalysts are reported. All catalysts developed were tested in the addition of diethylzinc to aromatic aldehydes and in the Henry reaction. The homogeneous catalysts showed moderate catalytic activity in the organozinc addition and good activity in the Henry reaction, whereas in the case of the nanocatalyst, it was not effective in the addition of diethylzinc to aldehydes and gave reasonable results in the Henry reaction. Moreover, the nanocatalyst remained unchanged over the course of up to three catalytic cycles. To the best of our knowledge, the proposed system is the first recyclable ephedrine-based magnetic nanocatalyst employed in an enantioselective reaction.

Influence of N-Substituents on the Adsorption Geometry of OH-Functionalized Chiral N-Heterocyclic Carbenes

Adsorption of chiral molecules on heterogeneous catalysts is a simple approach for inducing an asymmetric environment to enable enantioselective reactivity. Although the concept of chiral induction is straightforward, its practical utilization is far from simple, and only a few examples toward the successful chiral induction by surface anchoring of asymmetric modifiers have been demonstrated so far. Elucidating the factors that lead to successful chiral induction is therefore a crucial step for understanding the mechanism by which chirality is transferred. Herein, we identify the adsorption geometry of OH-functionalized N-heterocyclic carbenes (NHCs), which are chemical analogues to chiral modifiers that successfully promoted α-arylation reactions once anchored on Pd nanoparticles. Polarized near-edge X-ray absorption fine structure (NEXAFS) measurements on Pd(111) revealed that NHCs that were associated with low enantioselectivity were characterized with a well-ordered structure, in which the imidazole ring was vertically positioned and the OH-functionalized side arms were flat-lying. OH-functionalized NHCs that were associated with high enantioselectivity revealed a disordered/flexible adsorption geometry, which potentially enabled better interaction between the OH group and the prochiral reactant.

Chirality in porous self-assembled monolayer networks at liquid/solid interfaces: induction, reversion, recognition and transfer

Chirality in two dimensions (2D) has attracted increasing attention with regard to interesting fundamental aspects as well as potential applications. This article reports several aspects of supramolecular chirality control as exemplified by self-assembled monolayer networks (SAMNs) formed by a class of chiral building blocks consisting of a triangular conjugated core and alkoxy chains on the periphery. It highlights 2D chirality induction phenomena through a classic "sergeants-and-soldiers" mechanism, in which the inducer is incorporated into a network component, as well as through a "supramolecular host-guest" mechanism, in which the inducer is entrapped in the porous space, leading to counterintuitive chirality reversal. Stereochemical control can be extended to three dimensions too, based on interlayer hydrogen bonding of the same class of building blocks bearing hydroxy groups, exhibiting diastereospecific bilayer formation at both single molecule level and supramolecular level arising from orientation between the top and bottom layers. Finally, we showcase that homochiral SAMNs can also be used as templates for the grafting of in situ generated aryl radicals, by covalent bond formation to the basal graphitic surface, thereby yielding topologically chiral functionalized graphite, and thus extending the potential of chiral SAMNs.

Kinetic analysis of the asymmetric hydrogenation of (E)-2,3-diphenylpropenoic acid over cinchonidine derivative-modified Pd/C: quinoline ring modification

The substitutions at the 2′- and/or 6′-positions of the quinoline ring of cinchonidine reduce both the intrinsic enantioselectivity and adsorption strength for the enantioselective hydrogenation of α-phenylcinnamic acid over Pd/C.

Synthesis of Enantiomerically Enriched Drug Precursors by Lactobacillus paracasei BD87E6 as a Biocatalyst

Global sales of single enantiomeric drug products are growing at an alarming rate every year. A total of 7 bacterial strains were screened for their ability to reduce acetophenones to its corresponding alcohol. Among these strains Lactobacillus paracasei BD87E6 was found to be the most successful biocatalyst to reduce the ketones to the corresponding alcohols. The reaction conditions were systematically optimized for the reducing agent Lactobacillus paracasei BD87E6, which showed high enantioselectivity and conversion for the bioreduction. The preparative scale asymmetric reduction of 3-methoxyacetophenone (1h) by Lactobacillus paracasei BD87E6 gave (R)-1-(3-methoxyphenyl)ethanol (2h) with 92% yield and 99% enantiomeric excess. Compound 2h could be used for the synthesis of (S)-rivastigmine which has a great potential for the treatment of Alzheimer's disease. This study demonstrates that Lactobacillus paracasei BD87E6 can be used as a biocatalyst to obtain chiral carbinol with excellent yield and selectivity. The whole cell catalyzed the reductions of ketone substrates on the preparative scale, demonstrating that Lactobacillus paracasei BD87E6 would be a valuable biocatalyst for the preparation of chiral aromatic alcohols of pharmaceutical interest.

Enantiomer surface chemistry: conglomerate versus racemate formation on surfaces

Research on surface chirality is motivated by the need to develop functional chiral surfaces for enantiospecific applications. While molecular chirality in 3D has been the subject of study for almost two centuries, many aspects of 2D chiral surface chemistry have yet to be addressed. In 3D, racemic mixtures of chiral molecules tend to aggregate into racemate (molecularly heterochiral) crystals much more frequently than conglomerate (molecularly homochiral) crystals. Whether chiral adsorbates on surfaces preferentially aggregate into heterochiral rather than homochiral domains (2D crystals or clusters) is not known. In this review, we have made the first attempt to answer the following question based on available data: in 2D racemic mixtures adsorbed on surfaces, is there a clear preference for homochiral or heterochiral aggregation? The current hypothesis is that homochiral packing is preferred on surfaces; in contrast to 3D where heterochiral packing is more common. In this review, we present a simple hierarchical scheme to categorize the chirality of adsorbate-surface systems. We then review the body of work using scanning tunneling microscopy predominantly to study aggregation of racemic adsorbates. Our analysis of the existing literature suggests that there is no clear evidence of any preference for either homochiral or heterochiral aggregation at the molecular level by chiral and prochiral adsorbates on surfaces.

Mass transfer considerations for monitoring catalytic solid–liquid interfaces under operating conditions

A combined computational and experimental approach for optimizing mass transfer in microreactors for operando ATR-IR spectroscopy characterization of catalytic solid–liquid interfaces.

A Solid Iridium Catalyst for Diastereoselective Hydrogenation

An Ir(NHC) supported catalyst is used in the selective hydrogenation of terpinen-4-ol to cis p-menthan-4-ol. Its activity, selectivity and stability are compared to those of a homogeneous homologue [IrCl(COD)MesImPr] and to a commercial Pd/C. The solid Ir catalyst is much more selective than the Pd catalyst (92 vs. 42 % at 80 °C) but also more active, more selective and more stable than the iridium complex in solution. For the first time, a supported catalyst shows an enhanced activity with respect to a complex in a diastereoselective hydrogenation reaction.

Coordinative Alignment of Chiral Molecules to Control over the Chirality Transfer in Spontaneous Resolution and Asymmetric Catalysis

The production and availability of enantiomerically pure compounds that spurred the development of chiral technologies and materials are very important to the fine chemicals and pharmaceutical industries. By coordinative alignment of enantiopure guests in the metal‒organic frameworks, we reported an approach to control over the chirality of homochiral crystallization and asymmetric transformation. Synthesized by achiral triphenylamine derivatives, the chirality of silver frameworks was determined by the encapsulated enantiopure azomethine ylides, from which clear interaction patterns were observed to explore the chiral induction principles. With the changing of addition sequence of substrates, the enantioselectivity of asymmetric cycloaddition was controlled to verify the determinant on the chirality of the bulky MOF materials. The economical chirality amplification that merges a series of complicated self-inductions, bulk homochiral crystallization and enantioselective catalysis opens new avenues for enantiopure chemical synthesis and provides a promising path for the directional design and development of homochiral materials.

Production of (R)-1-(1,3-benzodioxol-5-yl)ethanol in high enantiomeric purity by Lactobacillus paracasei BD101

Piperonyl ring is found in a number of naturally occurring compounds and possesses enormous biological activities. There are many studies in the literature with compounds containing a piperonyl ring, but there are very few studies on the synthesis of chiral piperonyl carbinol. The objective of this study was to determine the microbial reduction ability of bacterial strains and to reveal the effects of different physicochemical parameters on this reduction ability. A total of 15 bacterial isolates were screened for their ability to reduce 1-(benzo[d][1,3]dioxol-5-yl) ethanone 1 to its corresponding alcohol. Among these isolates Lactobacillus paracasei BD101 was found to be the most successful biocatalyst to reduce the ketone containing piperonyl ring to the corresponding alcohol. The reaction conditions were systematically optimized for the reducing agent L paracasei BD101, which showed high enantioselectivity and conversion for the bioreduction. The preparative scale study was performed, and a total of 3.72 g of (R)-1-(1,3-benzodioxol-5-yl) ethanol in high enantiomeric form (>99% enantiomeric excess) was produced in a mild, cheap, and environment-friendly process. This study demonstrates that L paracasei BD101 can be used as a biocatalyst to obtain chiral carbinol with excellent yield and selectivity.

Chirality in adsorption on solid surfaces

In the present review we survey the main advances made in recent years on the understanding of chemical chirality at solid surfaces. Chirality is an important topic, made particularly relevant by the homochiral nature of the biochemistry of life on Earth, and many chiral chemical reactions involve solid surfaces. Here we start our discussion with a description of surface chirality and of the different ways that chirality can be bestowed on solid surfaces. We then expand on the studies carried out to date to understand the adsorption of chiral compounds at a molecular level. We summarize the work published on the adsorption of pure enantiomers, of enantiomeric mixtures, and of prochiral molecules on chiral and achiral model surfaces, especially on well-defined metal single crystals but also on other flat substrates such as highly ordered pyrolytic graphite. Several phenomena are identified, including surface reconstruction and chiral imprinting upon adsorption of chiral agents, and the enhancement or suppression of enantioselectivity seen in some cases upon adsorption of enantiomixtures of chiral compounds. The possibility of enhancing the enantiopurity of adsorbed layers upon the addition of chiral seeds and the so-called "sergeants and soldiers" phenomenon are presented. Examples are provided where the chiral behavior has been associated with either thermodynamic or kinetic driving forces. Two main approaches to the creation of enantioselective surface sites are discussed, namely, via the formation of supramolecular chiral ensembles made out of small chiral adsorbates, and by adsorption of more complex chiral molecules capable of providing suitable chiral environments for reactants by themselves, via the formation of individual adsorbate:modifier adducts on the surface. Finally, a discussion is offered on the additional effects generated by the presence of the liquid phase often required in practical applications such as enantioselective crystallization, chiral chromatography, and enantioselective catalysis.

Highly Enantioselective Production of Chiral Secondary Alcohols with Candida zeylanoides as a New Whole Cell Biocatalyst

The increasing demand for biocatalysts in synthesizing enantiomerically pure chiral alcohols results from the outstanding characteristics of biocatalysts in reaction, economic, and ecological issues. Herein, fifteen yeast strains belonging to three food originated yeast species Candida zeylanoides, Pichia fermentans, and Saccharomyces uvarum were tested for their capability for asymmetric reduction of acetophenone to 1-phenylethanol as biocatalysts. Of these strains, C. zeylanoides P1 showed an effective asymmetric reduction ability. Under optimized conditions, substituted acetophenones were converted to corresponding optically active secondary alcohols in up to 99% enantiomeric excess and at high yields. The preparative scale asymmetric bioreduction of 4-nitroacetophenone (1m) by C. zeylanoides P1 gave (S)-1-(4-nitrophenyl)ethanol (2m) with 89% yield and > 99% enantiomeric excess. Compound 2m has been obtained in an enantiomerically pure and inexpensive form. Additionally, these results indicate that C. zeylanoides P1 is a promising biocatalyst for the synthesis of chiral alcohols in industry.

Harnessing the Versatility of Continuous-Flow Processes: Selective and Efficient Reactions

There is a great need for effective transformations and a broad range of novel chemical entities. Continuous-flow (CF) approaches are of considerable current interest: highly efficient and selective reactions can be performed in CF reactors. The reaction setup of CF reactors offers a wide variety of possible points where versatility can be introduced. This article presents a number of selective and highly efficient gas-liquid-solid and liquid-solid reactions involving a range of reagents and immobilized catalysts. Enantioselective transformations through catalytic hydrogenation and organocatalytic reactions are included, and isotopically labelled compounds and pharmaceutically relevant 1,2,3-triazoles are synthesized in CF reactors. Importantly, the catalyst bed can be changed to a solid-phase peptide synthesis resin, with which peptide synthesis can be performed with the utilization of only 1.5 equivalents of the amino acid.

Asymmetric hydrogenation of α-ketoesters on the Pt(111) surface

A novel process is developed to prepare highly efficient single site Pt(111) hexagonal nanocrystals on a carbon support for the asymmetric hydrogenation of α-ketoesters.

Hierarchically structured porous organic polymer microspheres with built-in Fe3O4 supraparticles: construction of dual-level pores for Pt-catalyzed enantioselective hydrogenation

A magnetic responsive, dual-pore-distributed, and hyper-crosslinking polymer composite microsphere is synthesized and inlaid with platinum nanoparticles for enantioselective catalytic hydrogenation.

Chiral modification of platinum: ab initio study of the effect of hydrogen coadsorption on stability and geometry of adsorbed cinchona alkaloids

Hydrogen coadsorption affects the orientation and stability of cinchona alkaloids used for the chiral modification of platinum and thus can influence their enantiodifferentiating ability.

Preparation of free-standing mesoporous metal catalysts and their applications in heterogeneous enantioselective hydrogenations

This review presents the recent progress made in the preparation of free-standing mesoporous metals and their applications in heterogeneous enantioselective hydrogenations.

Heterogeneous asymmetric hydrogenation over chiral molecule-modified metal particles

Recent progress in heterogeneous asymmetric hydrogenation over chiral molecule-modified metal particles has been reviewed.

Platinum functionalized multiwall carbon nanotube composites as recyclable catalyst for highly efficient asymmetric hydrogenation of methyl pyruvate

A highly efficient platinum nanoparticle functionalized carbon nanocomposite is demonstrated to be a recyclable heterogeneous catalyst for asymmetric hydrogenation of methyl pyruvate.

Single-chiral-catalytic-surface-sites: STM and DFT study of stereodirecting complexes formed between (R)-1-(1-naphthyl)ethylamine and ketopantolactone on Pt(111)

Revealing the set of most stable bimolecular complexes formed by a prochiral molecule and a chiral modifier on Pt(111).

Three consecutive steps over the chirally modified Pt surface: asymmetric catalytic cascade reaction of 2-nitrophenylpyruvates

The influence of the reaction conditions on the asymmetric heterogeneous catalytic reaction of 2-nitrophenylpyruvates over Pt modified with cinchonidine showed that all three steps of the cascade occur on the metal surface.