The dissolution and complexing properties of ibuprofen and ketoprofen when mixed with N-methylglucamine

Compatibility of Drotaverine Hydrochloride with Ibuprofen and Ketoprofen Nonsteroidal Anti-Inflammatory Drugs Mixtures

Formulations with two or more active pharmaceutical ingredients (APIs) are a researched trend due to their convenient use compared with multiple medications. Moreover, drug-drug combinations may have a synergistic effect. Drotaverine hydrochloride (D-HCl) is commonly used for its antispasmodic action. The combination of a spasmolytic and an analgesic drug such as ibuprofen (Ibu) or ketoprofen (Ket) could become the answer for the treatment of localized pain. D-HCl:Ibu and D-HCl:Ket drug-drug interactions leading to the formation of eutectic compositions with increased bioavailability, obtained by mechanosynthesis, a green, solvent-free method was explored for the first time. The compatibility of Ibuprofen, Ketoprofen, and Drotaverine Hydrochloride was investigated using differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier-Transform Infrared spectroscopy (FTIR). Solid-liquid equilibrium (SLE) phase diagrams for the binary systems of active pharmaceutical ingredients were developed and the Tammann diagrams were designed to determine the eutectic compositions. The excess thermodynamic functions G^E for the pre-, post-, and eutectic compositions were obtained using the computed activity coefficients data. Results show that drotaverine-based pharmaceutical forms for pain treatment may be obtained at 0.9 respectively 0.8 molar fractions of ibuprofen and ketoprofen which is advantageous because the maximum allowed daily dose of Ibu is about 6 times higher than those of D-HCl and Ket. The obtained eutectics may be a viable option for the treatment of pain associated with cancer therapy.

Multicomponent Crystal of Mefenamic Acid and N-Methyl-d-Glucamine: Crystal Structures and Dissolution Study

A novel multicomponent crystal (MC) of mefenamic acid (MA) and N-methyl-d-glucamine (MG) had been prepared to improve the physicochemical properties of poorly soluble drugs, and was characterized for its physicochemical properties by powder X-ray diffraction analysis, differential scanning calorimetry thermal analysis, FT-IR spectroscopy, in vitro dissolution rate, and physical stability. In addition, the crystal structure was determined by single-crystal X-ray diffraction analysis. The differential scanning calorimetry thermogram of the MA-MG binary system exhibits a single and sharp endothermic peak at 151.20°C, which was attributed to the melting point of a MC of MA-MG. FT-IR spectroscopy analysis showed the occurrence of solid-state interaction by involving proton transfer between MA and MG. The crystal structure analysis confirmed that MA-MG formed 1:1 ratio salt type MC. The formation of a MC of MA with MG significantly improved the dissolution rate of MA in compared to intact MA, and also the crystal demonstrated a good stability under a high relative humidity. These good properties would be attributed to the layer structure of MA and MG in the crystal.

FTIR and TG analyses coupled with factor analysis in a compatibility study of acetazolamide with excipients

A compatibility study of drug substance with excipients is a crucial step in the drug development process in order to generate potent final drug formulations for efficient and safe therapy for various diseases. Thus, the development of new methods for compatibility studies is a great challenge. For this reason, a new approach based on improvement of FTIR spectra and TG curves interpretation using factor analysis (FA) was developed as a screening technique for assessing the compatibility of acetazolamide with selected excipients. This multivariate method demonstrates that in some cases acetazolamide and mixtures with high acetazolamide content formed one cluster, while a second cluster consisted of excipient and mixtures with high excipient content. Such clustering of the analyzed samples (drug substance, excipient and their mixtures) demonstrates the compatibility between ingredients. This in turn means that the FTIR spectra and TG curves of mixtures are the sum of absorption bands or of the thermal profiles of ingredients. In the case of incompatibility, the FTIR spectra and TG curves of mixtures differ from those of ingredients. The FA score scatter plot shows that clusters consist of mixtures which differ with respect to ingredient content. In conclusion, FA proved the incompatibility of acetazolamide mixtures with β-cyclodextrin, chitosan, lactose, mannitol, meglumine and starch. This was also confirmed by complementary techniques such as DSC and PXRD. Hence, the application of FA can be helpful for better comprehension of data obtained from FTIR spectra and TG curves.

Development of ibuprofen-loaded nanostructured lipid carrier-based gels: characterization and investigation of in vitro and in vivo penetration through the skin

An ibuprofen-loaded nanostructured lipid carrier (IBU-NLC) was developed for enhanced skin penetration to improve the treatment of osteoarthritis and other musculoskeletal diseases. The mean particle size was 106 nm, with a spherical morphology, a smooth surface, and a zeta potential of -18.4 mV. X-ray diffraction studies revealed the amorphous state of the lipid matrix. Both Raman spectroscopy and Fourier transformation infrared analysis indicated no major shifts in the spectra of the formulations, which suggest rapid drug dissolution from the nanoparticles. The drug loading was 9.85%, and the entrapment efficiency was 98.51%. In vitro release of the NLC dispersion, in vitro permeation, and in vivo animal studies of IBU-NLC gel all confirmed that the permeation of IBU was significantly better than that of a reference after 6 hours. In conclusion, IBU-NLC gel is of great potential to enhance drug permeation through the skin and hence the efficacy of the treatment of chronic joint inflammation.

Development of ketoprofen loaded proliposomal powders for improved gastric absorption and gastric tolerance: in vitro and in situ evaluation

The aim of the current investigation was to improve dissolution rate, gastric absorption and tolerance of a water insoluble non-steroidal anti-inflammatory drug ketoprofen by developing proliposomal powders. Ketoprofen proliposomal powders were prepared by solvent evaporation method with varying ratios of hydrogenated soyphosphatidyl choline (HSPC) and cholesterol. The prepared proliposomal powders were characterized for vesicle size, micromeritics, entrapment efficiency and in vitro dissolution behavior. Proliposomal powder (KPL3) composed of equimolar ratios of HSPC and cholesterol loaded on pearlitol SD 200 was selected as optimized formulation as it produced smaller liposomes (5.24 ± 1.35 μm) upon hydration with highest entrapment efficiency (53.16 ± 0.06%). All proliposomal powders showed improved dissolution characteristics than pure drug, however dissolution of drug from KPL3 was found to be highest (91.17 ± 6.3) and which is about 24 times higher than pure ketoprofen within 5 min. The transformation of crystalline ketoprofen to amorphous form was confirmed by solid state characterization. The absorption rate per hour for pure ketoprofen and proliposomal formulation (KPL3) was assessed in the stomach by conducting in situ gastric absorption studies in Wistar rats and was found to be 27 ± 1.22 and 36.98 ± 1.95%, respectively. In conclusion, enhanced dissolution and gastric absorption rate of ketoprofen from proliposomal powders suggest them as potential candidate for oral bioavailability improvement of ketoprofen.

Detection of compatibility between baclofen and excipients with aid of infrared spectroscopy and chemometry

In the paper infrared (IR) spectroscopy and multivariate exploration techniques: principal component analysis (PCA) and cluster analysis (CA) were applied as supportive methods for the detection of physicochemical incompatibilities between baclofen and excipients. In the course of research, the most useful rotational strategy in PCA proved to be varimax normalized, while in CA Ward's hierarchical agglomeration with Euclidean distance measure enabled to yield the most interpretable results. Chemometrical calculations confirmed the suitability of PCA and CA as the auxiliary methods for interpretation of infrared spectra in order to recognize whether compatibilities or incompatibilities between active substance and excipients occur. On the basis of IR spectra and the results of PCA and CA it was possible to demonstrate that the presence of lactose, β-cyclodextrin and meglumine in binary mixtures produce interactions with baclofen. The results were verified using differential scanning calorimetry, differential thermal analysis, thermogravimetry/differential thermogravimetry and X-ray powder diffraction analyses.

Molecular interactions in celecoxib-PVP-meglumine amorphous system

Stabilization of the amorphous form of a drug is conferred by additives that interact with it at the molecular level. Ternary systems of celecoxib, poly(vinyl pyrrolidone) (PVP) and meglumine were studied for molecular interactions responsible for enhanced drug stability and solubility in amorphous form. Meglumine was found to lower the glass transition temperature (Tg) of the drug due to its plasticization effect. However, the presence of PVP masked its destabilizing effect and provided net anti-plasticization to the celecoxib-PVP-meglumine (7:2:1 w/w) ternary amorphous system. Positive deviation of the experimentally determined Tg mix value for this composition, from those predicted by the Gordon-Taylor/Kelley-Bueche equation, inferred molecular interaction between the three species, which was also supported by band shifts from their Fourier-transform infra-red (FTIR) spectra. Further, shift of differential scanning calorimetry (DSC) melting endotherms of celecoxib in its amorphous systems from those observed for crystalline celecoxib confirmed the complexation between these components, which was also substantiated by molecular modelling studies that showed H-bonding of -S=O, 2-N of the pyrazole ring and -C-F groups of celecoxib with -O-H group of meglumine. These molecular interactions of amorphous celecoxib with meglumine were found to be the potential cause for enhanced stability and solubility of the celecoxib-PVP-meglumine ternary system.

Enhanced Oral Bioavailability of Ibuprofen in Rats by Poloxamer Gel Using Poloxamer 188 and Menthol

To improve the oral bioavailability of poorly water-soluble ibuprofen with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the ibuprofen-loaded preparations composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed an abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2 mg/mL. The simultaneous addition of menthol and poloxamer 188 significantly improved the dissolution rates of ibuprofen from aqueous solution due to the ibuprofen solubility-improving effect of menthol in the presence of poloxamer. Furthermore, the ibuprofen-loaded preparation with menthol and poloxamer 188 gave significantly higher initial plasma concentrations, Cmax, and AUC of ibuprofen than did the preparation without menthol and poloxamer 188, indicating that the simultaneous addition of menthol and poloxamer 188 could improve the oral bioavailability of ibuprofen in rats. In modern pain management it is always desirable for the ibuprofen-loaded preparation with poloxamer 188 and menthol to show a rapid onset of action with a minimal phase of lag time to feel the decreased pain. From an industry point of view, it is more desirable for a formulation to be fast acting, easy to use, and cost effective. Thus, the ibuprofen-loaded preparation with poloxamer 188 and menthol was a more effective oral dosage form for poorly water-soluble ibuprofen.

Compatibility Studies Between Ibuprofen or Ketoprofen with Cellulose Ether Polymer Mixtures Using Thermal Analysis

Differential scanning calorimetry (DSC) was used to investigate and detect incompatibilities between drugs such as: ibuprofen (IBU) or ketoprofen (KETO) with cellulose ether derivatives, which are frequently applied on controlled release dosage forms. Binary mixtures concerning methylcellulose (MC25) or hydroxypropylcellulose (HPC) with hydroxypropylmethylcellulose (HPMC) K15M or K100M in different ratios were prepared and evaluated by the appearance, shift, or disappearance of peaks and/or variations in the corresponding DeltaH values. According to the DSC results, binary mixtures between those polymers were found to be compatible, but their mixture with IBU or KETO, promotes a solid-solid interaction mainly with 1:1:1 (w/w) ratio (drug-excipient). However, when the drug:excipient interactions were detected, they were not found to affect the drug bioavailability. DSC was successfully employed to evaluate the compatibility of the drugs with the selected polymers.

Preparation of ibuprofen-loaded liquid suppository using eutectic mixture system with menthol

To prepare an ibuprofen-loaded liquid suppository using eutectic mixture with menthol, the effects of menthol and poloxamer 188 (P 188) on the aqueous solubility of ibuprofen were investigated. The physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of ibuprofen, menthol and P 188 were investigated. Then, the pharmacokinetic study of ibuprofen delivered by the liquid suppositories composed of P 188 and menthol were then performed. In the absence of P 188, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts of ibuprofen formed eutectic mixture with six parts of menthol. In the presence of P 188, the solutions with the same ratio showed abrupt increase in the solubility of ibuprofen. Furthermore, the solution with ratio of 4:6 showed more than 2.5- and 6-fold increase in the solubility of ibuprofen compared with that without additives and that without menthol, respectively. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Ibuprofen increased the gelation temperature and weakened the gel strength and bioadhesive force of liquid suppositories. However, menthol did the opposite due to forming the eutectic mixture with ibuprofen. The ibuprofen-loaded liquid suppository [P 188/menthol/ibuprofen (15/0.25/2.5%)] with the maximum ibuprofen solubility of 1.2mg/ml was administered easily to the anus and to remain at the administered site without leakage after the dose. Furthermore, it gave significantly higher initial plasma concentrations, Cmax and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the liquid suppository system with P 188 and menthol, a more convenient and effective rectal dosage form for ibuprofen will be expected to enhance the rectal bioavailability of ibuprofen.

Enhanced rectal bioavailability of ibuprofen in rats by poloxamer 188 and menthol

To improve the bioavailability of poorly water-soluble ibuprofen in the rectum with poloxamer and menthol, the effects of menthol and poloxamer 188 on the aqueous solubility of ibuprofen were investigated. The dissolution and pharmacokinetic study of ibuprofen delivered by the poloxamer gels composed of poloxamer 188 and menthol were then performed. In the absence of poloxamer, the solubility of ibuprofen increased until the ratio of menthol to ibuprofen increased from 0:10 to 4:6 followed by an abrupt decrease in solubility above the ratio of 4:6, indicating that four parts menthol formed eutectic mixture with six parts ibuprofen. In the presence of poloxamer, the solutions with the same ratio of menthol to ibuprofen showed abrupt increase in the solubility of ibuprofen. The poloxamer gel with menthol/ibuprofen ratio of 1:9 and higher than 15% poloxamer 188 showed the maximum solubility of ibuprofen, 1.2mg/ml. Menthol improved the dissolution rates of ibuprofen from poloxamer gels. Release mechanism showed that the release rate of ibuprofen from the poloxamer gels without menthol was independent of the time but the drug might be released from the poloxamer gels with menthol by Fickian diffusion. Furthermore, the poloxamer gel with menthol (poloxamer/menthol/ibuprofen (15%/0.25%/2.5%)) gave significantly higher initial plasma concentrations, C(max) and AUC of ibuprofen than did solid suppository, indicating that the drug from poloxamer gel could be more absorbed than that from solid one in rats. Thus, the poloxamer gel with poloxamer 188 and menthol was a more effective rectal dosage form for ibuprofen.

Drug-excipient interactions and their affect on absorption

Excipient(s) are traditionally thought of as inert but they can have a tremendous impact on the ultimate pharmacological availability of a drug substance when added to a formulation. The magnitude of this effect will depend on the characteristics of the drug and on the quantity and properties of the excipients. The aim of this article is to identify the various physicochemical and physiological processes that can be altered by drug-excipient interactions and to explore mechanisms by which they might occur. The regulatory implications of drug-excipient interactions will also be discussed.