Development of an in-syringe gas-assisted density tunable solidification of floating organic droplet-based dispersive liquid phase microextraction method coupled with HPLC-MS/MS for monitoring amikacin in biological fluids

A new sample preparation method named in-syringe gas-assisted density tunable dispersive liquid phase microextraction based on solidification of floating organic droplet has been introduced. This method was coupled with high-performance liquid chromatography-tandem mass spectrometry and used for the extraction and quantification of amikacin in plasma and exhaled breath condensate (EBC) samples of the patients receiving amikacin. In the proposed approach, an inert gas is bubbled into a syringe barrel containing aqueous solution of the analyte and a mixture of low density extraction solvent and volatile density modifier. Consequently, the density modifier is evaporated and the analyte is migrated into the released extractant droplets. Basic parameters affecting efficiency of the developed method were optimized. Under optimum conditions, the method limits of detection were 0.06 and 0.29 ng/mL in EBC and plasma, respectively. The extraction recoveries were 90% and 87% in EBC and plasma, respectively. Also, the obtained relative standard deviations were below 9.5% and 9.8% for EBC and plasma, respectively. Considering these results, the developed method provides a quick and efficient way to determine amikacin in patients' biological fluids and can be used widely in drug monitoring and clinical studies.

A Status Update on Pharmaceutical Analytical Methods of Aminoglycoside Antibiotic: Amikacin

Amikacin (AMK) is one of the commonly used aminoglycoside antibiotics, introduced for clinical use in patients suffering from bacterial infections especially life-threatening gram-negative infections. Due to lack of chromophore in the molecule, the detection of AMK during analysis is a challenge. Thus, pre and post-column derivatization techniques are generally used for AMK estimation. This review focuses on different analytical methods used for detection and quantification of AMK in pure or fixed dose combination pharmaceutical formulations and biological samples. Various reported methods described in the literature include high-performance liquid chromatography techniques, pulsed electrochemical detection techniques, Chemiluminescence techniques, Capillary electrophoresis and immunological methods. High-performance-liquid-chromatography based methods with UV/Vis spectrophotometric, fluorescence and mass spectrometric detection are the most prevailing methods employed for the analysis of AMK. This review could be of significant importance in the area of future AMK analytical method development studies.

A robust LC-MS/MS method for amikacin: application to cellular uptake and pharmacokinetic studies

Background: Aminoglycosides are last-resort antibiotics for bacterial infections due to concerns of nephrotoxicity. A robust method is needed to correlate the magnitude of drug accumulation in the kidneys and the onset of nephrotoxicity. Materials & methods: A LC-MS/MS assay was developed, circumventing common limitations associated with conventional assays. To demonstrate its applicability, renal cellular uptake and rat pharmacokinetic studies were performed with amikacin. Results: To improve elution, the mobile phases were optimized with 60 mM ammonium hydroxide (pH = 11.2). An extended quantifiable range was achieved with different ionization modes. Kidney cells incubated with escalating amikacin concentrations showed increased uptake. Single-dose pharmacokinetics of amikacin were reasonably characterized. Conclusion: This assay will facilitate future studies on improving amikacin-associated nephrotoxicity.

Development and validation of an HPLC method for determination of Amikacin in water samples by solid phase extraction and pre-column derivatization

This work presents a rapid and sensitive high performance liquid chromatography method for the determination of amikacin in water samples with solid phase extraction and pre-column derivatization. Amikacin residue was extracted from water samples with solid phase extraction cartridge. Then the extraction solution was derivatized with 4-chloro-3,5-dinitrobenzotrifluoride in the presence of triethylamine at 70°C in 20 min. The amikacin derivative was separated on a C18 column and detected by application of UV detection at 238 nm. The limit of detection is 0.2 μg/L with a signal-to-noise ratio of 3 and linearity is established over the concentration range from 0 to 500.0 μg/L. Recoveries of the amikacin in three types of water samples are from 87.5 % to 99.6 % and RSDs are 2.1 %-4.5 %. This method can be used for the quantification of amikacin residues in water samples.

Determination of amikacin in body fluid by high-performance liquid-chromatography with chemiluminescence detection

A simple and sensitive method was developed for the quantification of amikacin in human plasma and urine samples. The method involves centrifugation of body fluid plasma after dilution with an ethanol/sodium carbonate mixture, and then an aliquot of the supernatant is directly injected into the chromatograph. After separation on a reversed-phase C18 column (runtime 20 min), aminoglycoside is detected on the basis of its complex formation reaction with Cu(II), the catalyst of the luminol/hydrogen peroxide chemiluminescence system. Using a volume of 500 microl biological sample, linearity is established over the concentration range 0.15-2.0 microg/ml and the limit of detection (LOD) is ca. 50 microg/l in plasma or urine. The intra-day and inter-day precision (measured by relative standard deviation, R.S.D.%) are always less than 9%, and relative recoveries are found to be over 92%.

Development and validation of a novel LC non-derivatization method for the determination of amikacin in pharmaceuticals based on evaporative light scattering detection

A novel method for the direct determination of the aminoglycoside antibiotic amikacin and its precursor component kanamycin was developed and validated, based on reversed phase LC with evaporative light scattering detector (ELSD). ELSD response to amikacin was found to be enhanced by: (a) use of ion-pairing acidic reagents of increased molecular mass, (b) increase of mobile phase volatility and (c) decrease of peak width and asymmetry (obtained by controlling the mobile phase acidity and/or ratio of organic solvent to water). Utilizing a Thermo Hypersil BetaBasic C(18) column, the selected optimized mobile phase was water-methanol (60:40, v/v), containing 3.0 mll(-1) nonafluoropentanoic acid (18.2mM) (isocratic elution with flow rate of 1.0 mlmin(-1)). ELSD experimental parameters were: nitrogen pressure 3.5 bar, evaporation temperature 50 degrees C, and gain 11. Amikacin was eluted at 8.6 min and kanamycin at 10.4 min with a resolution of 1.5. Logarithmic calibration curves were obtained from 7 to 77 microgml(-1) (r>0.9995) for amikacin and 8 to 105 microgml(-1) (r>0.998) for kanamycin, with a LOD equal to 2.2 and 2.5 microgml(-1), respectively. In amikacin sulfate pharmaceutical raw materials, the simultaneous determination of sulfate (t(R)=2.3 min, LOD=1.8 microgml(-1), range 5-40 microgml(-1), %R.S.D.=1.1, r>0.9997), kanamycin and amikacin was feasible. No significant difference was found between the results of the developed LC-ELSD method and those of reference methods, while the mean recovery of kanamycin from spiked samples (0.5%, w/w) was 97.3% (%R.S.D.<or=2.0, n=6). Further, the developed method was applied for the determination of amikacin in pharmaceutical formulations (injection solutions) without any interference from the matrix (recovery from spiked samples ranged from 95.6 to 103.8%).

A new method for the analysis of amikacin using 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) derivatization and high-performance liquid chromatography with UV-detection

A simple and sensitive reversed-phase liquid chromatographic method has been developed for the determination of amikacin (AMK) by derivatization. The method is based on the pre-column derivatization of AMK with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC). The derivatization reaction proceeds in aqueous solution at room temperature with a borate buffer of pH 8.0. The formation of the corresponding derivative of AMK is instantaneous and it is stable for more than 36 h. Detection was performed by UV-absorption instead of fluorescence. Several factors influencing the derivatization reaction yields were studied and optimized. The system offered the following analytical parameters: limit of detection (LOD) of 0.068 micro g ml(-1) (3sigma), linear correlation coefficient of 0.9998 and linear range response from 2 to 50 microg ml(-1). The precision of the method was <1%. As a preliminary application, the method has been successfully applied to the amikacin determination in parenteral pharmaceutical formulations.