Rapid and sensitive in situ detection of heavy metals in fish using enhanced Raman spectroscopy

Heavy metals have been widely applied in industry, agriculture, and other fields because of their outstanding physics and chemistry properties. They are non-degradable even at low concentrations, causing irreversible harm to the human and other organisms. Therefore, it is of great significance to develop high accuracy and sensitivity as well as stable techniques for their detection. Raman scattering spectroscopy and atomic absorption spectrophotometer (AAS) were used parallelly to detect heavy metal ions such as Hg, Cd, and Pb of different concentrations in fish samples. The concentration of the heavy metals is varied from 5 ppb to 5 ppm. Despite the satisfactory recoveries of AAS, their drawbacks are imperative for an alternative technique. In Raman scattering spectroscopy, the intensities and areas of the characteristic peaks are increased with increasing the concentration of the heavy metals. For Hg concentration ≥ 1 ppm, a slight shift is observed in the peak position. The obtained values of peak intensity and peak area are modeled according to Elvoich, Pseudo-first order, Pseudo-second order, and asymptotic1 exponential model. The best modeling was obtained using the Elovich model followed by the asymptotic1 exponential model. The introduced Raman spectroscopy-based approach for on-site detection of trace heavy metal pollution in fish samples is rapid, low-cost, and simple to implement, increasing its visibility in food safety and industrial applications.

Multi-scale fractal Fourier Ptychographic microscopy to assess the dose-dependent impact of copper pollution on living diatoms

Accumulation of bioavailable heavy metals in aquatic environment poses a serious threat to marine communities and human health due to possible trophic transfers through the food chain of toxic, non-degradable, exogenous pollutants. Copper (Cu) is one of the most spread heavy metals in water, and can severely affect primary producers at high doses. Here we show a novel imaging test to assay the dose-dependent effects of Cu on live microalgae identifying stress conditions when they are still capable of sustaining a positive growth. The method relies on Fourier Ptychographic Microscopy (FPM), capable to image large field of view in label-free phase-contrast mode attaining submicron lateral resolution. We uniquely combine FPM with a new multi-scale analysis method based on fractal geometry. The system is able to provide ensemble measurements of thousands of diatoms in the liquid sample simultaneously, while ensuring at same time single-cell imaging and analysis for each diatom. Through new image descriptors, we demonstrate that fractal analysis is suitable for handling the complexity and informative power of such multiscale FPM modality. We successfully tested this new approach by measuring how different concentrations of Cu impact on Skeletonema pseudocostatum diatom populations isolated from the Sarno River mouth.

Picomolar level sensorial dual colorimetric gold nanoparticle sensor for Zn2+ and Hg2+ ions synthesized from bark extract of Lannea Grandis Coromandelica and its wide range applications in real sample analysis

In this work a facile, rapid, reproducible and non-toxic approach has been demonstrated for synthesis of most stable AuNPs from bark extract of Lannea Grandis Coromandelica. UV-Visible spectroscopy, FTIR, TEM, SAED, EDX, XRD, DLS, Zeta Potential, FE-SEM, AFM and XPS techniques were employed for the characterization of synthesized LGC-AuNPs. The UV-Vis spectra of LGC-AuNPs gave SPR peak at 536 nm while the TEM analysis revealed LGC-AuNPs have 20.75 nm size with spherical in shape. DLS study showed the AuNPs have average diameter 50.18 nm. The synthesized AuNPs exhibited very high selectivity, rapid response in recognition towards Zn2+ and Hg2+ ions by changing its color within 20 sec. This proposed sensor can detect very low picomolar level of Zn2+ and Hg2+ ions (LOD value for Zn2+ and Hg2+ were found 1.36 pM and 24.60 pM respectively). Here we also studied effect of several factors such as variation of conc of gold, temperature, incubation time, pH, salt, solvent (polar protic and polar aprotic) to know in which condition AuNPs have high stability and sensitivity. The data revealed that synthesized AuNPs was stable up to two years at pH 6.5 at room temperature in water media and under this condition, it shows maximum sensitivity and reactivity. Moreover, here interference study was carried out to identify high selectivity of synthesized LGC-AuNPs probe in presence of different metal ions. The real sample analyses also revealed the great applicability of this probe. Therefore, this simple, rapid, low-cost, sensing activity appeared to hold great sensibleness for detection of heavy metal ions in real sample.

Novel approach to supercritical fluid chromatography-mass spectrometry analysis of metal ions using EDTA complexation

BACKGROUND

Reliable methods enabling detection of metal ions, and especially heavy metals, in different matrices are necessary in various fields such as ecology, pharmaceuticals and toxicology. As some of the currently used methods suffer from spectral and chemical interferences, this study investigates the applicability of SFC-MS/MS for the determination of metal ions.

RESULTS

Effective novel approaches for metal ion analysis using CO2-based mobile phase were developed using three ligands forming metal complexes. As metal-EDTA complexes are prepared by simple addition of EDTA to the solution containing metal ions, this approach to metal ion analysis does not require laborious synthesis and isolation of solid metal-complexes. Besides, two other approaches using diethyldithiocarbamate and acetylacetonate as ligands were compared. Metal complexes of Cu, Co, Cr, Fe, Al, Mn, and Zn with all 3 ligands were synthesized and their identity was confirmed by high-resolution mass spectrometry (HRMS). The suitability of the three developed UHPSFC-MS/MS methods was examined using the determination of calibration range and repeatability of injections. Moreover, the universality of the developed UHPSFC-MS/MS method for the determination of metal-EDTA complexes was proved by analyzing Ni, Bi and Pb as additional metal ions.

SIGNIFICANCE AND NOVELTY

This study demonstrates the extended range of applicability for SFC based separations. For the first time, the possibility to analyze metal complexes with EDTA using a fast and reliable ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MS/MS) method is reported. The three developed UHPSFC-MS/MS methods are able to separate DDC, acac, and EDTA complexes of various metals very efficiently (total cycle times of 5, 2, and 3 min, respectively). They offer a fast and green alternative to chromatographic methods commonly used for metal ion analysis.

Simultaneous detection of mercury and cadmium ions: A colorimetric method in aqueous media

Hg and Cd are the two most toxic heavy metal ions that could be found in aqueous solutions. In this study, a chemosensor based on 5-(4-((4-nitrophenyl) diazenyl) phenyl)-1,3,4-oxadiazole-2-thiol (DOT) was reported to detect these ions simultaneously. DOT showed high selectivity towards Hg ion by changing the color of the solution from beige to gold-yellow at different concentrations of Hg ion. In comparison, other relevant metals, such as Li+, Na+, K+, Cs+, Mg2+, Ca2+, Al3+, Fe2+, Ag+, Cu2+, Pb2+, Ni2+, Zn2+, Cr3+, Fe3+, Pb4+, Mn2+, and Cd2+ did not affect the color of the DOT solution as the interfering ions. Despite no changes in the color of DOT solution in the presence of Cd ion, a solution containing DOT-Hg complex was changed from gold-yellow to orange by adding Cd ion, providing an approach for detecting Hg and Cd ion simultaneously with UV-Vis and Fluorescent spectroscopy. DOT exhibited a high association constant with a detection limit of 0.05 μM for Hg and Cd ions in an aqueous solution. The results of quantum mechanics (QM) calculations were also consistent with the experimental observations, which indicated that changes in the band gap could explain the various colors of DOT complex with metal ions.

Intellectualized Visualization of Single-Particle Raman Spectra for Sensitive Detection and Simultaneous Multianalysis of Heavy Metal Ions

Easy-to-use, reliable, and real-time methods for detecting heavy metal ion contamination are urgently required, which is a primary concern for water pollution control and human health. However, present methods for this aim are still unable to achieve simultaneous multianalysis for complex real sample detection. Herein, an intellectualized vision-based single-nanoparticle Raman imaging strategy combined with ion-responsive functional nucleic acids (FNAs) was proposed to address these issues. We reported a correspondence between the concentration of the analytes and the density of particles (DOP) of specifically captured nanoparticles to achieve sensitive detection and simultaneous multianalysis of heavy metal ions. The specific detection of Pb2+ (Hg2+) was obtained with a detection linear range from 100 pM to 100 nM (from 500 fM to 100 nM) and limit of detections low to 1 pM (100 fM), with the advantages of good specificity, excellent homogeneity, and reproducibility. Furthermore, the differentiation of different heavy metal ions (Pb2+/Hg2+) was achieved, i.e., the simultaneous multianalysis, based on Raman imaging of the single particle and intelligent machine vision method. Finally, the Raman imaging assay was utilized for real sample analysis, and it provided a powerful and reliable tool for detecting trace Pb2+/Hg2+ in real water samples and facilitated the portable on-site monitoring of heavy metal ions.

Rapid Detection of Mercury Ions Using Sustainable Natural Gum-Based Silver Nanoparticles

Fabrication of metal nanostructures using natural products has attracted scientists and researchers due to its renewable and environmentally benign availability. This work has prepared an eco-friendly, low-cost, and rapid colorimetric sensor of silver nanoparticles using tree gum as a reducing and stabilizing agent. Several characterization techniques have been exploited to describe the synthesized nanosensor morphology and optical properties. Ultraviolet−Visible (UV−Vis) spectroscopy has been used for monitoring the localized plasmon surface area. High-resolution transmission electron microscopy (HR-TEM) illustrated the size and shape of silver nanoparticles. X-ray diffraction spectra showed the crystallography and purity of the product. Silver nanoparticles decorated with almond gum molecules (AgNPs@AG) demonstrated high sensitivity and colorimetric detection of mercury ions in water samples. The method is based on the aggregation of AgNPs and the disappearing yellow color of AgNPs via a spectrophotometer. The detection limit of this method was reported to be 0.5 mg/L. This work aimed to synthesize a rapid, easy-preparation, eco-friendly, and efficient naked-eye colorimetric sensor to detect toxic pollutants in aqueous samples.

Biosynthesis of bifunctional silver nanoparticles for catalytic reduction of organic pollutants and optical monitoring of mercury (II) ions using their oxidase-mimic activity

In this study, an aqueous extract of Sclerocarya birrea leaves was used as a reducing agent to synthesize silver nanoparticles (AgNPs). The synthesis was carried out at room temperature and was both rapid and simple. Different characterization techniques such as UV/visible spectroscopy, surface-enhanced Raman spectroscopy, X-ray diffraction, and focused ion beam scanning electron microscopy were used to confirm the formation of AgNPs. The synthesized nanoparticles exhibited catalytic activity for the reduction of 4-nitrophenol, methyl orange, methylene blue, and rhodamine 6G. The catalytic activity was monitored by measuring the UV/visible absorbance spectra of the compounds using sodium borohydride as a reducing agent and found to be high. Additionally, the particles displayed oxidase-like activity. In the presence of AgNPs, 3, 3', 5, 5'-tetramethylbenzidine (TMB) which is colorless was transformed to oxidized TMB, which is blue, using dissolved oxygen as the oxidant. In the presence of Hg2+, the oxidase-like activity was enhanced. On the basis of this observation, an assay for the analysis of Hg2+ was developed. The linear range of the calibration curve is wide (0-600 µM) and the limit of detection (LOD) is low, as small as 34.8 nM. The method is strongly selective towards Hg2+. Tap water obtained from the laboratory where these experiments were carried out was used to study the feasibility of the method in real sample analyses.

Gold and silver nanoparticles in resonance Rayleigh scattering techniques for chemical sensing and biosensing: a review

This review (with 116 refs.) summarizes the state of the art in resonance Rayleigh scattering (RRS)-based analytical methods. Following an introduction into the fundamentals of RRS and on the preparation of metal nanoparticles, a first large section covers RRS detection methods based on the use of gold nanoparticles, with subsections on proteins (albumin, bovine serum albumin and ovalbumin, glycoproteins, folate receptors, iron binding-proteins, G-proteins-coupled receptors, transmembrane proteins, epidermal growth factor receptors), on pesticides, saccharides, vitamins, heavy metal ions (such as mercury, silver, chromium), and on cationic dyes. This is followed by a section on RRS methods based on the use of silver nanoparticles, with subsections on the detection of nucleic acids and insecticides. Several Tables are presented where an RRS method is compared to the performance of other methods. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical Abstract Change in the resonance Rayleigh scattering (RRS) intensity when mixing the nanoparticles with the specific analyte.

A compact prospective investigation on the colorimetric recognition of Hg2+ ion and photostimulated degradation of discharged toxic organic dyes motivated by H. mutabilis directed silver nanoparticles

A colorimetric sensing method for Hg²⁺ ion was developed using H. mutabilis motivated silver NPs. The calculated detection limit was estimated ∼48 pM. The nanoparticles also work as a good photo catalyst for degradation of TB and Rh-B.

Synthesis and characterisation of calix[4]arene based bis(triazole)-bis(hexahydroquinoline): Probing highly selective fluorescence quenching towards mercury (Hg2+) analyte

In the present study, we are reporting the synthesis of a triazoles incorporated fluorescent hexahydroquinoline appended calix[4]arene 7 and its highly selective optical recognition ability towards Hg²⁺. The optical sensor 7 was synthesized via two different synthetic pathways and unambiguously characterized by mass spectrometry and NMR spectroscopy. The stoichiometric ratio between 7 and Hg²⁺ was determined as 1:1 based on Job's plot and ESI-MS analysis. The chemosensor 7 selectively recognized Hg²⁺ in the presence of competitive cations such as Cu²⁺, Cu¹⁺, Co³⁺, Ni²⁺, Ag¹⁺, Fe²⁺, Fe³⁺, Cr³⁺, Pb²⁺, Cd²⁺, Zn²⁺, Sn²⁺, Ti⁴⁺, Sb³⁺, In³⁺, Ba²⁺, Ca²⁺, and K¹⁺. The limit of detection (LOD) was established as 0.5 μM on spectrofluorimetric analysis. According to world health organization (WHO) in guidelines for drinking-water quality, the mercury level in natural occurring ground and surface water is about ∼0.5 μM (μg/L). The supra molecule 7 with LOD (0.5 μM) could potentially serve effective receptors for Hg²⁺ cation. The probe 7 was applied effectively for detection of Hg²⁺ in real water samples (i.e. tap and deionized water), spiked with Hg²⁺ (10 μM) solution. Moreover, the compound 7 showed non-toxicity during cytotoxic assay against human B cells as they retain their morphology. The supramolecule 7 in living cells showed selectivity towards Hg²⁺ in cytotoxic assay with T lymphocytes, evident by morphological changes observed via AFM analysis.