Keratocytes pull with similar forces on their dorsal and ventral surfaces

Versatile and High-throughput Force Measurement Platform for Dorsal Cell Mechanics

We present a high-throughput microfluidics technique facilitating in situ measurements of cell mechanics parameters at the dorsal side of the cell, including molecular binding strengths, local traction forces, and viscoelastic properties. By adjusting the flow rate, the force magnitude exerted on the cell can be modulated ranging from ~14 pN to 2 nN to perturb various force-dependent processees in cells. Time-lapse images were acquired to record events due to such perturbation. The values of various mechanical parameters are subsequently obtained by single particle tracking. Up to 50 events can be measured simultaneously in a single experiment. Integrating the microfluidic techniques with the analytic framework established in computational fluid dynamics, our method is physiologically relevant, reliable, economic and efficient.

3D-printed magnetic tweezers for dorsal traction force measurement

In this study, economic magnetic tweezers (EMT) with a sharp gradient field were designed and built, in order to facilitate accurate force measurement. Our design costs less than 40 USD and is easy to mount onto most microscope stages. We leverage the computational fluidic dynamics techniques to calculate the forces based on the results obtained using our simple device. The EMT device is especially suitable to measure the traction forces at the dorsal side of a cell. As a proof of concept it was demonstrated that the EMT device could be applied to measure the dorsal traction forces exerted via the CD80-CTLA4 bond in metastatic cancer cells.

The desmoplakin-intermediate filament linkage regulates cell mechanics

Desmoplakin connects desmosomal core components to intermediate filaments at sites of cell–cell adhesion. Modulating the strength of this linkage using desmoplakin mutants led to alterations in cell–substrate and cell–cell forces and cell stiffness as assessed by micropillar arrays and atomic force microscopy. Perturbation of the actin cytoskeleton leads to abrogation of these effects.

The translation of mechanical forces into biochemical signals plays a central role in guiding normal physiological processes during tissue development and homeostasis. Interfering with this process contributes to cardiovascular disease, cancer progression, and inherited disorders. The actin-based cytoskeleton and its associated adherens junctions are well-established contributors to mechanosensing and transduction machinery; however, the role of the desmosome–intermediate filament (DSM–IF) network is poorly understood in this context. Because a force balance among different cytoskeletal systems is important to maintain normal tissue function, knowing the relative contributions of these structurally integrated systems to cell mechanics is critical. Here we modulated the interaction between DSMs and IFs using mutant forms of desmoplakin, the protein bridging these structures. Using micropillar arrays and atomic force microscopy, we demonstrate that strengthening the DSM–IF interaction increases cell–substrate and cell–cell forces and cell stiffness both in cell pairs and sheets of cells. In contrast, disrupting the interaction leads to a decrease in these forces. These alterations in cell mechanics are abrogated when the actin cytoskeleton is dismantled. These data suggest that the tissue-specific variability in DSM–IF network composition provides an opportunity to differentially regulate tissue mechanics by balancing and tuning forces among cytoskeletal systems.

Coupling of Retrograde Flow to Force Production During Malaria Parasite Migration

Migration of malaria parasites is powered by a myosin motor that moves actin filaments, which in turn link to adhesive proteins spanning the plasma membrane. The retrograde flow of these adhesins appears to be coupled to forward locomotion. However, the contact dynamics between the parasite and the substrate as well as the generation of forces are complex and their relation to retrograde flow is unclear. Using optical tweezers we found retrograde flow rates up to 15 μm/s contrasting with parasite average speeds of 1-2 μm/s. We found that a surface protein, TLP, functions in reducing retrograde flow for the buildup of adhesive force and that actin dynamics appear optimized for the generation of force but not for maximizing the speed of retrograde flow. These data uncover that TLP acts by modulating actin dynamics or actin filament organization and couples retrograde flow to force production in malaria parasites.

Two-Phase Acto-Cytosolic Fluid Flow in a Moving Keratocyte: A 2D Continuum Model

The F-actin network and cytosol in the lamellipodia of crawling cells flow in a centripetal pattern and spout-like form, respectively. We have numerically studied this two-phase flow in the realistic geometry of a moving keratocyte. Cytosol has been treated as a low viscosity Newtonian fluid flowing through the high viscosity porous medium of F-actin network. Other involved phenomena including myosin activity, adhesion friction, and interphase interaction are also discussed to provide an overall view of this problem. Adopting a two-phase coupled model by myosin concentration, we have found new accurate perspectives of acto-cytosolic flow and pressure fields, myosin distribution, as well as the distribution of effective forces across the lamellipodia of a keratocyte with stationary shape. The order of magnitude method is also used to determine the contribution of forces in the internal dynamics of lamellipodia.

Regulation of RhoA activity by adhesion molecules and mechanotransduction

The low molecular weight GTP-binding protein RhoA regulates many cellular events, including cell migration, organization of the cytoskeleton, cell adhesion, progress through the cell cycle and gene expression. Physical forces influence these cellular processes in part by regulating RhoA activity through mechanotransduction of cell adhesion molecules (e.g. integrins, cadherins, Ig superfamily molecules). RhoA activity is regulated by guanine nucleotide exchange factors (GEFs) and GTPase activating proteins (GAPs) that are themselves regulated by many different signaling pathways. Significantly, the engagement of many cell adhesion molecules can affect RhoA activity in both positive and negative ways. In this brief review, we consider how RhoA activity is regulated downstream from cell adhesion molecules and mechanical force. Finally, we highlight the importance of mechanotransduction signaling to RhoA in normal cell biology as well as in certain pathological states.

Interplay of RhoA and mechanical forces in collective cell migration driven by leader cells

The leading front of a collectively migrating epithelium often destabilizes into multicellular migration fingers where a cell initially similar to the others becomes a leader cell while its neighbours do not alter. The determinants of these leader cells include mechanical and biochemical cues, often under the control of small GTPases. However, an accurate dynamic cartography of both mechanical and biochemical activities remains to be established. Here, by mapping the mechanical traction forces exerted on the surface by MDCK migration fingers, we show that these structures are mechanical global entities with the leader cells exerting a large traction force. Moreover, the spatial distribution of RhoA differential activity at the basal plane strikingly mirrors this force cartography. We propose that RhoA controls the development of these fingers through mechanical cues: the leader cell drags the structure and the peripheral pluricellular acto-myosin cable prevents the initiation of new leader cells.

Cell migration

Cell migration is fundamental to establishing and maintaining the proper organization of multicellular organisms. Morphogenesis can be viewed as a consequence, in part, of cell locomotion, from large-scale migrations of epithelial sheets during gastrulation, to the movement of individual cells during development of the nervous system. In an adult organism, cell migration is essential for proper immune response, wound repair, and tissue homeostasis, while aberrant cell migration is found in various pathologies. Indeed, as our knowledge of migration increases, we can look forward to, for example, abating the spread of highly malignant cancer cells, retarding the invasion of white cells in the inflammatory process, or enhancing the healing of wounds. This article is organized in two main sections. The first section is devoted to the single-cell migrating in isolation such as occurs when leukocytes migrate during the immune response or when fibroblasts squeeze through connective tissue. The second section is devoted to cells collectively migrating as part of multicellular clusters or sheets. This second type of migration is prevalent in development, wound healing, and in some forms of cancer metastasis.

Cell migration

Cell migration is fundamental to establishing and maintaining the proper organization of multicellular organisms. Morphogenesis can be viewed as a consequence, in part, of cell locomotion, from large-scale migrations of epithelial sheets during gastrulation, to the movement of individual cells during development of the nervous system. In an adult organism, cell migration is essential for proper immune response, wound repair, and tissue homeostasis, while aberrant cell migration is found in various pathologies. Indeed, as our knowledge of migration increases, we can look forward to, for example, abating the spread of highly malignant cancer cells, retarding the invasion of white cells in the inflammatory process, or enhancing the healing of wounds. This article is organized in two main sections. The first section is devoted to the single-cell migrating in isolation such as occurs when leukocytes migrate during the immune response or when fibroblasts squeeze through connective tissue. The second section is devoted to cells collectively migrating as part of multicellular clusters or sheets. This second type of migration is prevalent in development, wound healing, and in some forms of cancer metastasis.

Membrane tension, myosin force, and actin turnover maintain actin treadmill in the nerve growth cone

A growth cone is a motile structure at the tips of axons that is driven by the actin network and guides axon extension. Low actin adhesion to the substrate creates a stationary actin treadmill that allows leading-edge protrusion when adhesion increases in response to guidance cues. We use experimental measurements in the Aplysia bag growth cone to develop and constrain a simple mechanical model of the actin treadmill. We show that actin retrograde flow is primarily generated by myosin contractile forces, but when myosin is inhibited, leading-edge membrane tension increases and drives the flow. By comparing predictions of the model with previous experimental measurements, we demonstrate that lamellipodial and filopodial filament breaking contribute equally to the resistance to the flow. The fully constrained model clarifies the role of actin turnover in the mechanical balance driving the actin treadmill and reproduces the recent experimental observation that inhibition of actin depolymerization causes retrograde flow to slow exponentially with time. We estimate forces in the actin treadmill, and we demonstrate that measured G-actin distributions are consistent with the existence of a forward-directed fluid flow that transports G-actin to the leading edge.

Traction forces of neutrophils migrating on compliant substrates

Proper functioning of the innate immune response depends on migration of circulating neutrophils into tissues at sites of infection and inflammation. Migration of highly motile, amoeboid cells such as neutrophils has significant physiological relevance, yet the traction forces that drive neutrophil motion in response to chemical cues are not well characterized. To better understand the relationship between chemotactic signals and the organization of forces in motile neutrophils, force measurements were made on hydrogel surfaces under well-defined chemotactic gradients created with a microfluidic device. Two parameters, the mean chemoattractant concentration (C(M)) and the gradient magnitude (Δc/Δx) were varied. Cells experiencing a large gradient with C(M) near the chemotactic receptor K(D) displayed strong punctate centers of uropodial contractile force and strong directional motion on stiff (12 kPa) surfaces. Under conditions of ideal chemotaxis--cells in strong gradients with mean chemoattractant near the receptor K(D) and on stiffer substrates--there is a correlation between the magnitude of force generation and directional motion as measured by the chemotactic index. However, on soft materials or under weaker chemotactic conditions, directional motion is uncorrelated with the magnitude of traction force. Inhibition of either β(2) integrins or Rho-associated kinase, a kinase downstream from RhoA, greatly reduced rearward traction forces and directional motion, although some vestigial lamellipodium-driven motility remained. In summary, neutrophils display a diverse repertoire of methods for organizing their internal machinery to generate directional motion.

Viscoelastic gel-strip model for the simulation of migrating cells

Migrating tumor cells can exhibit both mesenchymal- and amoeboid-type behaviors. Recent studies have shown that both cellular and extracellular structural and mechanical variables control the transition of tumor cells from one mode to the other and provide them with morphological plasticity. The mesenchymal-mode migration is characterized by strong adhesion and proteolytic machinery to navigate through complex extracellular matrices. The amoeboid-mode migration is characterized by little or no adhesion and strong actomyosin contraction to squeeze through the matrices. While adhesion dependent migration has been computationally and experimentally studied in both 2D and 3D environments, quantitative models of amoeboid motion in native environments are lacking. In order to address this major gap in our understanding and to probe the mesenchymal to amoeboid transitions quantitatively and comprehensively, we have developed an axisymmetric viscoelastic gel-strip model of a single cell to investigate a cell migrating in native-like environments. In this model, cell migration and morphology are governed by internal stresses as well as external forces. The internal stresses are controlled by F-actin density distribution, protrusion strength, and contraction strength. The external forces are controlled by adhesion strength and steric resistance from the extracellular matrix. Our model predicts that the transition of the cell migration mode from mesenchymal- to amoeboid-type, and vice versa, is closely related to the loss of adhesion as well as increased contraction strength of the cells. Our results indicate that amoeboid migration is more suited for low-resistance environment while mesenchymal migration is preferred in high-resistance environment, which would explain the versatile behaviors of tumor cells in complex environments.

Modeling myosin-dependent rearrangement and force generation in an actomyosin network

Actomyosin contractility is a major force-generating mechanism that drives rearrangement of actomyosin networks; it is fundamental to cellular functions such as cellular reshaping and movement. Thus, to clarify the mechanochemical foundation of the emergence of cellular functions, understanding the relationship between actomyosin contractility and rearrangement of actomyosin networks is crucial. For this purpose, in this study, we present a new particulate-based model for simulating the motions of actin, non-muscle myosin II, and α-actinin. To confirm the model's validity, we successfully simulated sliding and bending motions of actomyosin filaments, which are observed as fundamental behaviors in dynamic rearrangement of actomyosin networks in migrating keratocytes. Next, we simulated the dynamic rearrangement of actomyosin networks. Our simulation results indicate that an increase in the density fraction of myosin induces a higher-order structural transition of actomyosin filaments from networks to bundles, in addition to increasing the force generated by actomyosin filaments in the network. We compare our simulation results with experimental results and confirm that actomyosin bundles bridging focal adhesions and the characteristics of myosin-dependent rearrangement of actomyosin networks agree qualitatively with those observed experimentally.

A POROELASTIC MODEL FOR CELL CRAWLING INCLUDING MECHANICAL COUPLING BETWEEN CYTOSKELETAL CONTRACTION AND ACTIN POLYMERIZATION

Much is known about the biophysical mechanisms involved in cell crawling, but how these processes are coordinated to produce directed motion is not well understood. Here, we propose a new hypothesis whereby local cytoskeletal contraction generates fluid flow through the lamellipodium, with the pressure at the front of the cell facilitating actin polymerization which pushes the leading edge forward. The contraction, in turn, is regulated by stress in the cytoskeleton. To test this hypothesis, finite element models for a crawling cell are presented. These models are based on nonlinear poroelasticity theory, modified to include the effects of active contraction and growth, which are regulated by mechanical feedback laws. Results from the models agree reasonably well with published experimental data for cell speed, actin flow, and cytoskeletal deformation in migrating fish epidermal keratocytes. The models also suggest that oscillations can occur for certain ranges of parameter values.

Leading tip drives soma translocation via forward F-actin flow during neuronal migration

Neuronal migration involves coordinated extension of the leading process and translocation of the soma, but the relative contribution of different subcellular regions, including the leading process and cell rear, in driving soma translocation remains unclear. By local manipulation of cytoskeletal components in restricted regions of cultured neurons, we examined the molecular machinery underlying the generation of traction force for soma translocation during neuronal migration. In actively migrating cerebellar granule cells in culture, a growth cone (GC)-like structure at the leading tip exhibits high dynamics, and severing the tip or disrupting its dynamics suppressed soma translocation within minutes. Soma translocation was also suppressed by local disruption of F-actin along the leading process but not at the soma, whereas disrupting microtubules along the leading process or at the soma accelerated soma translocation. Fluorescent speckle microscopy using GFP-alpha-actinin showed that a forward F-actin flow along the leading process correlated with and was required for soma translocation, and such F-actin flow depended on myosin II activity. In migrating neurons, myosin II activity was high at the leading tip but low at the soma, and increasing or decreasing this front-to-rear difference accelerated or impeded soma advance. Thus, the tip of the leading process actively pulls the soma forward during neuronal migration through a myosin II-dependent forward F-actin flow along the leading process.

A microfluidic imaging chamber for the direct observation of chemotactic transmigration

To study the roles of nonmuscle myosin II (NM-II) during invasive cell migration, microfluidic migration chambers have been designed and fabricated using photo- and soft-lithography microfabrication techniques. The chamber consists of two channels separated by a vertical barrier with multiple bays of pores with widths varying from 6 microm to 16 microm, and lengths varying from 25 microm to 50 microm. The cells are plated in the channel on one side of the barrier while a chemoattractant is flowed through the channel on the other side of the barrier. In these chambers, cells can be observed with transmitted light or fluorescence optics while they chemotax through various sized pores that impose differential mechanical resistance to transmigration. As an initial test of this device, we compared breast-cancer cell chemotactic transmigration through different pore sizes with and without inhibition of NM-II. Two distinct rates were observed as cells attempted to pull their nucleus through the smaller pores, and the faster nuclear transit mode was critically dependent on NM-II motor activity. The ability to monitor cells as they chemotax through pores of different dimensions within a single experimental system provides novel information on how pore size affects cell morphology and migration rate, providing a dramatic improvement of imaging potential relative to other in vitro transmigration systems such as Boyden chambers.

Probing cellular traction forces by micropillar arrays: contribution of substrate warping to pillar deflection

Quantifying cellular forces relies on accurate calibrations of the sensor stiffness. Neglecting deformations of elastic substrates to which elastic pillars are anchored systematically overestimates the applied forces (up to 40%). A correction factor considering substrate warping is derived analytically and verified experimentally. The factor scales with the dimensionless pillar aspect ratio. This has significant implications when designing pillar arrays or comparing absolute forces measured on different pillar geometries during cell spreading, motility, or rigidity sensing.

Cell contraction forces in scaffolds with varying pore size and cell density

The contractile behavior of cells is relevant in understanding wound healing and scar formation. In tissue engineering, inhibition of the cell contractile response is critical for the regeneration of physiologically normal tissue rather than scar tissue. Previous studies have measured the contractile response of cells in a variety of conditions (e.g. on two-dimensional solid substrates, on free-floating tissue engineering scaffolds and on scaffolds under some constraint in a cell force monitor). Tissue engineering scaffolds behave mechanically like open-cell elastomeric foams: between strains of about 10 and 90%, cells progressively buckle struts in the scaffold. The contractile force required for an individual cell to buckle a strut within a scaffold has been estimated based on the strut dimensions (radius, r, and length, l) and the strut modulus, E(s). Since the buckling force varies, according to Euler's law, with r(4)/l(2), and the relative density of the scaffold varies as (r/l)(2), the cell contractile force associated with strut buckling is expected to vary with the square of the pore size for scaffolds of constant relative density. As the cell density increases, the force per cell to achieve a given strain in the scaffold is expected to decrease. Here we model the contractile response of fibroblasts by analyzing the response of a single tetrakaidecahedron to forces applied to individual struts (simulating cell contractile forces) using finite element analysis. We model tetrakaidecahedra of different strut lengths, corresponding to different scaffold pore sizes, and of varying numbers of loaded struts, corresponding to varying cell densities. We compare our numerical model with the results of free-floating contraction experiments of normal human dermal fibroblasts (NHDF) in collagen-GAG scaffolds of varying pore size and with varying cell densities.

Force transmission in migrating cells

During cell migration, forces generated by the actin cytoskeleton are transmitted through adhesion complexes to the substrate. To investigate the mechanism of force generation and transmission, we analyzed the relationship between actin network velocity and traction forces at the substrate in a model system of persistently migrating fish epidermal keratocytes. Front and lateral sides of the cell exhibited much stronger coupling between actin motion and traction forces than the trailing cell body. Further analysis of the traction-velocity relationship suggested that the force transmission mechanisms were different in different cell regions: at the front, traction was generated by a gripping of the actin network to the substrate, whereas at the sides and back, it was produced by the network's slipping over the substrate. Treatment with inhibitors of the actin-myosin system demonstrated that the cell body translocation could be powered by either of the two different processes, actomyosin contraction or actin assembly, with the former associated with significantly larger traction forces than the latter.

Cytoskeletal coherence requires myosin-IIA contractility

Maintaining a physical connection across cytoplasm is crucial for many biological processes such as matrix force generation, cell motility, cell shape and tissue development. However, in the absence of stress fibers, the coherent structure that transmits force across the cytoplasm is not understood. We find that nonmuscle myosin-II (NMII) contraction of cytoplasmic actin filaments establishes a coherent cytoskeletal network irrespective of the nature of adhesive contacts. When NMII activity is inhibited during cell spreading by Rho kinase inhibition, blebbistatin, caldesmon overexpression or NMIIA RNAi, the symmetric traction forces are lost and cell spreading persists, causing cytoplasm fragmentation by membrane tension that results in 'C' or dendritic shapes. Moreover, local inactivation of NMII by chromophore-assisted laser inactivation causes local loss of coherence. Actin filament polymerization is also required for cytoplasmic coherence, but microtubules and intermediate filaments are dispensable. Loss of cytoplasmic coherence is accompanied by loss of circumferential actin bundles. We suggest that NMIIA creates a coherent actin network through the formation of circumferential actin bundles that mechanically link elements of the peripheral actin cytoskeleton where much of the force is generated during spreading.

Actin-myosin viscoelastic flow in the keratocyte lamellipod

The lamellipod, the locomotory region of migratory cells, is shaped by the balance of protrusion and contraction. The latter is the result of myosin-generated centripetal flow of the viscoelastic actin network. Recently, quantitative flow data was obtained, yet there is no detailed theory explaining the flow in a realistic geometry. We introduce models of viscoelastic actin mechanics and myosin transport and solve the model equations numerically for the flat, fan-shaped lamellipodial domain of keratocytes. The solutions demonstrate that in the rapidly crawling cell, myosin concentrates at the rear boundary and pulls the actin network inward, so the centripetal actin flow is very slow at the front, and faster at the rear and at the sides. The computed flow and respective traction forces compare well with the experimental data. We also calculate the graded protrusion at the cell boundary necessary to maintain the cell shape and make a number of other testable predictions. We discuss model implications for the cell shape, speed, and bi-stability.

Locomotion guidance by extracellular matrix is adaptive and can be restored by a transient change in Ca2+ level

Navigation of cell locomotion by gradients of soluble factors can be desensitized if the concentration of the chemo-attractant stays unchanged. It remains obscure if the guidance by immobilized extracellular matrix (ECM) as the substrate is also adaptive and if so, how can the desensitized ECM guidance be resensitized. When first interacting with a substrate containing micron-scale fibronectin (FBN) trails, highly motile fish keratocytes selectively adhere and migrate along the FBN paths. However, such guided motion become adaptive after about 10 min and the cells start to migrate out of the ECM trails. We found that a burst increase of intracellular calcium created by an uncaging technique immediately halts the undirected migration by disrupting the ECM-cytoskeleton coupling, as evidenced by the appearance of retrograde F-actin flow. When the motility later resumes, the activated integrin receptors render the cell selectively binding to the FBN path and reinitiates signaling events, including tyrosine phosphorylation of paxillin, that couple retrograde F-actin flow to the substrate. Thus, the calcium-resensitized cell can undergo a period of ECM-navigated movement, which later becomes desensitized. Our results also suggest that endogenous calcium transients as occur during spontaneous calcium oscillations may exert a cycling resensitization-desensitization control over cell's sensing of substrate guiding cues.

Intracellular fluid flow in rapidly moving cells

Cytosolic fluid dynamics have been implicated in cell motility because of the hydrodynamic forces they induce and because of their influence on transport of components of the actin machinery to the leading edge. To investigate the existence and the direction of fluid flow in rapidly moving cells, we introduced inert quantum dots into the lamellipodia of fish epithelial keratocytes and analysed their distribution and motion. Our results indicate that fluid flow is directed from the cell body towards the leading edge in the cell frame of reference, at about 40% of cell speed. We propose that this forward-directed flow is driven by increased hydrostatic pressure generated at the rear of the cell by myosin contraction, and show that inhibition of myosin II activity by blebbistatin reverses the direction of fluid flow and leads to a decrease in keratocyte speed. We present a physical model for fluid pressure and flow in moving cells that quantitatively accounts for our experimental data.

Positively and negatively modulating cell adhesion to type I collagen via peptide grafting

The biophysical interactions between cells and type I collagen are controlled by the level of cell adhesion, which is dictated primarily by the density of ligands on collagen and the density of integrin receptors on cells. The native adhesivity of collagen was modulated by covalently grafting glycine-arginine-glycine-aspartic acid-serine (GRGDS), which includes the bioactive RGD sequence, or glycine-arginine-aspartic acid-glycine-serine (GRDGS), which includes the scrambled RDG sequence, to collagen with the hetero-bifunctional coupling agent 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The peptide-grafted collagen self-assembled into a fibrillar gel with negligible changes in gel structure and rheology. Rat dermal fibroblasts (RDFs) and human smooth muscle cells demonstrated increased levels of adhesion on gels prepared from RGD-grafted collagen, and decreased levels of adhesion on RDG-grafted collagen. Both cell types demonstrated an increased ability to compact free-floating RGD-grafted collagen gels, and an impaired ability to compact RDG-grafted gels. RDF migration on and within collagen was increased with RDG-grafted collagen and decreased with RGD-grafted collagen, and dose-response experiments indicated a biphasic response of RDF migration to adhesion. Smooth muscle cells demonstrated similar, though not statistically significant, trends. The ability to both positively and negatively modulate cell adhesion to collagen increases the versatility of this natural biomaterial for regenerative therapies.

The use of gelatin substrates for traction force microscopy in rapidly moving cells

The study of traction forces generated by rapidly moving cells requires the use of substrates that are highly elastic because these cells typically generate weaker traction forces than slower moving cells. Gelatin substrates are soft enough to allow deformation by rapidly moving cells such as fish epidermal keratocytes and Dictyostelium discoideum amoebas. In addition, gelatin substrates are thin (approximately 30-40 microm) and transparent, allowing them to be used in combination with high-resolution calcium imaging. Importantly, the responsiveness of gelatin substrates allows changes in traction force generation to be detected within seconds, corresponding to the timescale of calcium transients. Here we describe the manufacture and application of gelatin substrates to study the role of mechanochemical signaling in the regulation of keratocyte movement. We show how patterns of traction force generation can be analyzed from a time series of traction vector maps, and how to interpret them in relation to cell movement. In addition, we discuss how the gelatin traction force assay is being used to study the mechanics of Dictyostelium cell motility, and future applications such as the study of neuronal path finding.

Modeling emergent tissue organization involving high-speed migrating cells in a flow equilibrium

There is increasing interest in the analysis of biological tissue, its organization and its dynamics with the help of mathematical models. In the ideal case emergent properties on the tissue scale can be derived from the cellular scale. However, this has been achieved in rare examples only, in particular, when involving high-speed migration of cells. One major difficulty is the lack of a suitable multiscale simulation platform, which embeds reaction diffusion of soluble substances, fast cell migration and mechanics, and, being of great importance in several tissue types, cell flow homeostasis. In this paper a step into this direction is presented by developing an agent-based mathematical model specifically designed to incorporate these features with special emphasis on high-speed cell migration. Cells are represented as elastic spheres migrating on a substrate in lattice-free space. Their movement is regulated and guided by chemoattractants that can be derived from the substrate. The diffusion of chemoattractants is considered to be slower than cell migration and, thus, to be far from equilibrium. Tissue homeostasis is not achieved by the balance of growth and death but by a flow equilibrium of cells migrating in and out of the tissue under consideration. In this sense the number and the distribution of the cells in the tissue is a result of the model and not part of the assumptions. For the purposes of demonstration of the model properties and functioning, the model is applied to a prominent example of tissue in a cellular flow equilibrium, the secondary lymphoid tissue. The experimental data on cell speed distributions in these tissues can be reproduced using reasonable mechanical parameters for the simulated cell migration in dense tissue.

MscCa Regulation of Tumor Cell Migration and Metastasis

The acquisition of cell motility is a required step in order for a cancer cell to migrate from the primary tumor and spread to secondary sites (metastasize). For this reason, blocking tumor cell migration is considered a promising approach for preventing the spread of cancer. However, cancer cells just as normal cells can migrate by several different modes referred to as "amoeboid," "mesenchymal," and "collective cell." Under appropriate conditions, a single cell can switch between modes. A consequence of this plasticity is that a tumor cell may be able to avoid the effects of an agent that targets only one mode by switching modes. Therefore, a preferred strategy would be to target mechanisms that are shared by all modes. This chapter reviews the evidence that Ca(2+) influx via the mechanosensitive Ca(2+)-permeable channel (MscCa) is a critical regulator of all modes of cell migration and therefore represents a very good therapeutic target to block metastasis.

Analysis of single mammalian cells on-chip

A goal of modern biology is to understand the molecular mechanisms underlying cellular function. The ability to manipulate and analyze single cells is crucial for this task. The advent of microengineering is providing biologists with unprecedented opportunities for cell handling and investigation on a cell-by-cell basis. For this reason, lab-on-a-chip (LOC) technologies are emerging as the next revolution in tools for biological discovery. In the current discussion, we seek to summarize the state of the art for conventional technologies in use by biologists for the analysis of single, mammalian cells, and then compare LOC devices engineered for these same single-cell studies. While a review of the technical progress is included, a major goal is to present the view point of the practicing biologist and the advances that might increase adoption by these individuals. The LOC field is expanding rapidly, and we have focused on areas of broad interest to the biology community where the technology is sufficiently far advanced to contemplate near-term application in biological experimentation. Focus areas to be covered include flow cytometry, electrophoretic analysis of cell contents, fluorescent-indicator-based analyses, cells as small volume reactors, control of the cellular microenvironment, and single-cell PCR.

Collection and Expansion of Single Cells and Colonies Released from a Micropallet Array

The ability to selectively grow out individual cells possessing unique characteristics from within a mixed population is of widespread importance for biomedical investigations. Generation of genetically engineered cell lines, transformation studies, cell-based assays, and stem cell studies are examples where single-cell cloning is of immense value. The vast majority of mammalian cells grow adherent to a surface; therefore, positive selection followed by cloning of cells while the cells remain adherent to their growth surface is an important goal. We recently demonstrated a microfabricated cell array combined with laser-based release of individual array elements for positive selection of single cells. In the current work, a strategy to collect single cells for clonal expansion is described. The system enabled cloning of individual cells with 80-90% efficiency. Single cells were selected and cloned from small populations of fewer than 10,000 cells. Strategies used by cells to migrate from the pallets to form colonies on the surface of the collection device were examined. Implementation of encoded array elements made it possible to follow specific cells throughout the selection, collection, and cloning procedure. Thus, a particular cell can be identified by any number of imaging techniques, isolated, and clonally expanded to generate a homogeneous cell line or a pure sample for genetic or biochemical analysis.

Polarization and Movement of Keratocytes: A Multiscale Modelling Approach

Eukariotic cell motility is a complex phenomenon, in which the cytoskeleton and its major constituent, actin, play an essential role. Actin forms polymers of long, stiff filaments that are cross-linked into an anisotropic network inside a thin sheet-like cellular protrusion, the lamellipod. At the leading edge of this structure, polymerization of actin filaments creates the force that pushes out the membrane and leads to translocation of a motile cell. Dynamics of the actin network account for changes in cell shape, crawling motion and turning of the cell in response to external cues. Regulating the dynamics of the cytoskeleton, and playing a central role in signal transduction in the cell, are Cdc42, Rac and Rho (GTPases of the rho family, collectively known as the small G-proteins) and the actin nucleating complex, Arp2/3. In this paper, we use a multiscale modelling approach in a 2D model of a motile cell. We describe the mutual interactions of the small G-proteins, and their effects on capping and side-branching of actin filaments. We incorporate the pushing exerted by oriented actin filament ends on the cell edge, and a Rho-dependent contraction force. Combining these biochemical and mechanical aspects, we investigate the dynamics of a model epidermal fish keratocyte through in silico experiments. Our model gives insight into how, in response to some cue, a cell can polarize, form a leading edge, and move; concomitantly it explains how a keratocyte cell can maintain its shape and polarity, even after removal of the initial stimulus, and how it can change direction quickly in response to changes in its environment. We show that establishment of polarity stems from interactions of Cdc42, Rac and Rho, while maintenance and robustness of polarity is due to the rapid cytosolic diffusion of the inactive (GDI-bound) forms of the small G-proteins. Our model produces a cell shape that closely resembles the keratocytes and correct speeds for biologically reasonable parameter values. Movies of the simulations can be obtained from http://theory.bio.uu.nl/stan/keratocyte.

Cellular adaptation to mechanical stress: role of integrins, Rho, cytoskeletal tension and mechanosensitive ion channels

To understand how cells sense and adapt to mechanical stress, we applied tensional forces to magnetic microbeads bound to cell-surface integrin receptors and measured changes in bead displacement with sub-micrometer resolution using optical microscopy. Cells exhibited four types of mechanical responses: (1) an immediate viscoelastic response; (2) early adaptive behavior characterized by pulse-to-pulse attenuation in response to oscillatory forces; (3) later adaptive cell stiffening with sustained (>15 second) static stresses; and (4) a large-scale repositioning response with prolonged (>1 minute) stress. Importantly, these adaptation responses differed biochemically. The immediate and early responses were affected by chemically dissipating cytoskeletal prestress (isometric tension), whereas the later adaptive response was not. The repositioning response was prevented by inhibiting tension through interference with Rho signaling, similar to the case of the immediate and early responses, but it was also prevented by blocking mechanosensitive ion channels or by inhibiting Src tyrosine kinases. All adaptive responses were suppressed by cooling cells to 4 degrees C to slow biochemical remodeling. Thus, cells use multiple mechanisms to sense and respond to static and dynamic changes in the level of mechanical stress applied to integrins.

Nanotechnology for Cell–Substrate Interactions

In the pursuit to understand the interaction between cells and their underlying substrates, the life sciences are beginning to incorporate micro- and nanotechnology-based tools to probe and measure cells. The development of these tools portends endless possibilities for new insights into the fundamental relationships between cells and their surrounding microenvironment that underlie the physiology of human tissue. Here, we review techniques and tools that have been used to study how a cell responds to the physical factors in its environment. We also discuss unanswered questions that could be addressed by these approaches to better elucidate the molecular processes and mechanical forces that dominate the interactions between cells and their physical scaffolds.

Mechanobiology in the third dimension

Cells are mechanically coupled to their extracellular environments, which play critical roles in both communicating the state of the mechanical environment to the cell as well as in mediating cellular response to a variety of stimuli. Along with the molecular composition and mechanical properties of the extracellular matrix (ECM), recent work has demonstrated the importance of dimensionality in cell-ECM associations for controlling the sensitive communication between cells and the ECM. Matrix forces are generally transmitted to cells differently when the cells are on two-dimensional (2D) vs. within three-dimensional (3D) matrices, and cells in 3D environments may experience mechanical signaling that is unique vis-à-vis cells in 2D environments, such as the recently described 3D-matrix adhesion assemblies. This review examines how the dimensionality of the extracellular environment can affect in vitro cell mechanobiology, focusing on collagen and fibrin systems.

Encapsulation of attached ectoparasitic glochidia larvae of freshwater mussels by epithelial tissue on fins of naive and resistant host fish

To metamorphose into juveniles and subsequently mature into adults, the glochidia larvae of freshwater mussels in the order Unionoida must temporarily parasitize the gills, fins, or other external structures of fish. Once attached to the fish, the glochidium is encapsulated by host fish epithelial tissue. The migration of epithelial cells of the bluegill sunfish Lepomis macrochirus over glochidia of Utterbackia imbecillis was examined by time-lapse video microscopy, and the morphology was examined by scanning electron microscopy. Initially, the leading edge epithelial cells migrating over the larvae became rounded and the cells moved as a sheet until the attached glochidium was completely covered. Cyst formation on host fish that had been repeatedly exposed to mussel larvae was significantly delayed and morphologically irregular compared to that on naïve fish. Cyst formation on other species of fish that are less successful as hosts was examined. In general, it took longer for glochidia to become encapsulated on these less suitable potential hosts. The delay and irregularities in cyst formation on resistant fish and nonhost fish species may result in increased mortality and reduced success of metamorphosis of glochidia.

Weak force stalls protrusion at the leading edge of the lamellipodium

Protrusion, the first step of cell migration, is driven by actin polymerization coupled to adhesion at the cell's leading edge. Polymerization and adhesive forces have been estimated, but the net protrusion force has not been measured accurately. We arrest the leading edge of a moving fish keratocyte with a hydrodynamic load generated by a fluid flow from a micropipette. The flow arrests protrusion locally as the cell approaches the pipette, causing an arc-shaped indentation and upward folding of the leading edge. The effect of the flow is reversible upon pipette removal and dependent on the flow direction, suggesting that it is a direct effect of the external force rather than a regulated cellular response. Modeling of the fluid flow gives a surprisingly low value for the arresting force of just a few piconewtons per micrometer. Enhanced phase contrast, fluorescence, and interference reflection microscopy suggest that the flow does not abolish actin polymerization and does not disrupt the adhesions formed before the arrest but rather interferes with weak nascent adhesions at the very front of the cell. We conclude that a weak external force is sufficient to reorient the growing actin network at the leading edge and to stall the protrusion.

Lamellipodial contractions during crawling and spreading

Most eukaryotic cells can crawl over surfaces. In general, this motility requires three distinct actions: polymerization at the leading edge, adhesion to the substrate, and retraction at the rear. Recent experiments with mouse embryonic fibroblasts showed that during spreading and crawling the lamellipodium undergoes periodic contractions that are substrate-dependent. Here I show that a simple model incorporating stick-slip adhesion and a simplified mechanism for the generation of contractile forces is sufficient to explain periodic lamellipodial contractions. This model also explains why treatment of cells with latrunculin modifies the period of these contractions. In addition, by coupling a diffusing chemical species that can bind actin, such as myosin light-chain kinase, with the contractile model leads to periodic rows and waves in the chemical species, similar to what is observed in experiments. This model provides a novel and simple explanation for the generation of contractile waves during cell spreading and crawling that is only dependent on stick-slip adhesion and the generation of contractile force and suggests new experiments to test this mechanism.

Computational model for cell migration in three-dimensional matrices

Although computational models for cell migration on two-dimensional (2D) substrata have described how various molecular and cellular properties and physiochemical processes are integrated to accomplish cell locomotion, the same issues, along with certain new ones, might contribute differently to a model for migration within three-dimensional (3D) matrices. To address this more complicated situation, we have developed a computational model for cell migration in 3D matrices using a force-based dynamics approach. This model determines an overall locomotion velocity vector, comprising speed and direction, for individual cells based on internally generated forces transmitted into external traction forces and considering a timescale during which multiple attachment and detachment events are integrated. Key parameters characterize cell and matrix properties, including cell/matrix adhesion and mechanical and steric properties of the matrix; critical underlying molecular properties are incorporated explicitly or implicitly. Model predictions agree well with experimental results for the limiting case of migration on 2D substrata as well as with recent experiments in 3D natural tissues and synthetic gels. Certain predicted features such as biphasic behavior of speed with density of matrix ligands for 3D migration are qualitatively similar to their 2D counterparts, but new effects generally absent in 2D systems, such as effects due to matrix sterics and mechanics, are now predicted to arise in many 3D situations. As one particular sample manifestation of these effects, the optimal levels of cell receptor expression and matrix ligand density yielding maximal migration are dependent on matrix mechanical compliance.

Tracking retrograde flow in keratocytes: news from the front

Actin assembly at the leading edge of the cell is believed to drive protrusion, whereas membrane resistance and contractile forces result in retrograde flow of the assembled actin network away from the edge. Thus, cell motion and shape changes are expected to depend on the balance of actin assembly and retrograde flow. This idea, however, has been undermined by the reported absence of flow in one of the most spectacular models of cell locomotion, fish epidermal keratocytes. Here, we use enhanced phase contrast and fluorescent speckle microscopy and particle tracking to analyze the motion of the actin network in keratocyte lamellipodia. We have detected retrograde flow throughout the lamellipodium at velocities of 1-3 microm/min and analyzed its organization and relation to the cell motion during both unobstructed, persistent migration and events of cell collision. Freely moving cells exhibited a graded flow velocity increasing toward the sides of the lamellipodium. In colliding cells, the velocity decreased markedly at the site of collision, with striking alteration of flow in other lamellipodium regions. Our findings support the universality of the flow phenomenon and indicate that the maintenance of keratocyte shape during locomotion depends on the regulation of both retrograde flow and actin polymerization.

MULTISCALE TWO-DIMENSIONAL MODELING OF A MOTILE SIMPLE-SHAPED CELL

Cell crawling is an important biological phenomenon underlying coordinated cell movement in morphogenesis, cancer, and wound healing. In recent decades the process of cell crawling has been experimentally and theoretically dissected into further subprocesses: protrusion of the cell at its leading edge, retraction of the cell body, and graded adhesion. A number of one-dimensional (1-D) models explain successfully a proximal-distal organization and movement of the motile cell. However, more adequate two-dimensional (2-D) models are lacking. We propose a multiscale 2-D computational model of the lamellipodium (motile appendage) of a simply shaped, rapidly crawling fish keratocyte cell. We couple submodels of (i) protrusion and adhesion at the leading edge, (ii) the elastic 2-D lamellipodial actin network, (iii) the actin-myosin contractile bundle at the rear edge, and (iv) the convection-reaction-diffusion actin transport on the free boundary lamellipodial domain. We simulate the combined model numerically using a finite element approach. The simulations reproduce observed cell shapes, forces, and movements and explain some experimental results on perturbations of the actin machinery. This novel 2-D model of the crawling cell makes testable predictions and posits questions to be answered by future modeling.

Zoetic polymers

Conditions mediating the formation of biological polymers in situ are reviewed, and terminology suggested to differentiate polymers found in living cells from synthetic materials and polymers derived from biological sources that are modified or studied in a way that obscures their biological function. Methods currently used to characterize the mechanical properties of biopolymer networks in cells are briefly discussed.

Roles of microtubules, cell polarity and adhesion in electric-field-mediated motility of 3T3 fibroblasts

Direct-current electric fields mediate motility (galvanotaxis) of many cell types. In 3T3 fibroblasts, electric fields increased the proportion, speed and cathodal directionality of motile cells. Analogous to fibroblasts' spontaneous migration, we initially hypothesized that reorientation of microtubule components modulates galvanotaxis. However, cells with intact microtubules did not reorient them in the field and cells without microtubules still migrated, albeit slowly, thus disproving the hypothesis. We next proposed that, in monolayers wounded and placed in an electric field, reorientation of microtubule organizing centers and stable, detyrosinated microtubules towards the wound edge is necessary and/or sufficient for migration. This hypothesis was negated because field exposure mediated migration of unoriented, cathode-facing cells and curtailed migration of oriented, anode-facing cells. This led us to propose that ablating microtubule detyrosination would not affect galvanotaxis. Surprisingly, preventing microtubule detyrosination increased motility speed, suggesting that detyrosination inhibits galvanotaxis. Microtubules might enhance adhesion/de-adhesion remodeling during galvanotaxis; thus, electric fields might more effectively mediate motility of cells poorly or dynamically attached to substrata. Consistent with this hypothesis, incompletely spread cells migrated more rapidly than fully spread cells. Also, overexpression of PAK4, a Cdc42-activated kinase that decreases adhesion, enhanced galvanotaxis speed, whereas its lack decreased speed. Thus, electric fields mediate fibroblast migration via participation of microtubules and adhesive components, but their participation differs from that during spontaneous motility.

Slipping or gripping? Fluorescent speckle microscopy in fish keratocytes reveals two different mechanisms for generating a retrograde flow of actin

Fish keratocytes can generate rearward directed traction forces within front portions of the lamellipodium, suggesting that a retrograde flow of actin may also occur here but this was not detected by previous photoactivation experiments. To investigate the relationship between retrograde flow and traction force generation, we have transfected keratocytes with GFP-actin and used fluorescent speckle microscopy, to observe speckle flow. We detected a retrograde flow of actin within the leading lamellipodium that is inversely proportional to both protrusion rate and cell speed. To observe the effect of reducing contractility, we treated transfected cells with ML7, a potent inhibitor of myosin II. Surprisingly, ML7 treatment led to an increase in retrograde flow rate, together with a decrease in protrusion and cell speed, but only in rapidly moving cells. In slower moving cells, retrograde flow decreased, whereas protrusion rate and cell speed increased. These results suggest that there are two mechanisms for producing retrograde flow. One involves slippage between the cytoskeleton and adhesions, that decreases traction force production. The other involves slippage between adhesions and the substratum, which increases traction force production. We conclude that a biphasic relationship exists between retrograde actin flow and adhesiveness in moving keratocytes.

Dielectrophoretic registration of living cells to a microelectrode array

We present a novel microfabricated device to simultaneously and actively trap thousands of single mammalian cells in alignment with a planar microelectrode array. Thousands of 3 micromdiameter trapping electrodes were fabricated within the bottom of a parallel-plate flow chamber. Cells were trapped on the electrodes and held against destabilizing fluid flows by dielectrophoretic forces generated in the device. In general, each electrode trapped only one cell. Adhesive regions were patterned onto the surface in alignment with the traps such that cells adhered to the array surface and remained in alignment with the electrodes. By driving the device with different voltages, we showed that trapped cells could be killed by stronger electric fields. However, with weaker fields, cells were not damaged during trapping, as indicated by the similar morphologies and proliferation rates of trapped cells versus controls. As a test of the device, we patterned approximately 20000 cells onto a 1cm(2) grid of rectangular adhesive regions, with two electrodes and thus two cells per rectangle. Our method obtained 70+/-1% fidelity versus 17+/-1% when using an existing cell-registration technique. By allowing the placement of desired numbers of cells at specified locations, this approach addresses many needs to manipulate and register cells to the surfaces of biosensors and other devices with high precision and fidelity.

Molecular dissection of the fibroblast-traction machinery

Motile fibroblasts generate forces that can be expressed as cell migration or as traction, the drawing-in of extracellular matrix. Traction by cultured fibroblasts can induce a rapid concerted reorganization of collagen gel, creating a pattern of collagen alignment similar to that seen in tendons and ligaments. In such fibrous connective tissues, after pattern morphogenesis is complete, ongoing traction may be responsible for the maintenance of proper form and function. The molecules that generate and transmit forces have been catalogued; however, how these nanometer-scale molecules contribute to millimeter-scale patterns has not been directly tested. Here, we placed pairs of explants of human periodontal ligament fibroblasts in collagen gels, where ligament-like straps of anisotropic collagen formed on the axes between them. We scrutinized the traction apparatus using electron microscopy, video microscopy, and computer-based pattern analysis, augmented with pharmacologic inhibitors of cytoskeletal function. Patterning was marked by the co-alignment of collagen, fibroblasts, and their actin cytoskeletons, all parallel to the axis between explants. The pattern was diminished by depolymerizing actin filaments or by blocking myosin activity, but was accentuated by depolymerizing microtubules. The plasma membrane also seems to contribute to the traction force. These molecular components combine to exert a sub-maximal traction force on the matrix, suggesting that the force may be regulated to ensure tissue tensional homeostasis.

Dielectrophoretic registration of living cells to a microelectrode array

We present a novel microfabricated device to simultaneously and actively trap thousands of single mammalian cells in alignment with a planar microelectrode array. Thousands of 3 Ipm diameter trapping electrodes were fabricated within the bottom of a parallel-plate flow chamber. Cells were trapped on the electrodes and held against destabilizing fluid flows by dielectrophoretic forces generated in the device. In general, each electrode trapped only one cell. Adhesive regions were patterned onto the surface in alignment with the traps such that cells adhered to the array surface and remained in alignment with the electrodes. By driving the device with different voltages, we showed that trapped cells could be killed by stronger electric fields. However, with weaker fields, cells were not damaged during trapping, as indicated by the similar morphologies and proliferation rates of trapped cells versus controls. As a test of the device, we patterned approximately 20,000 cells onto aI cm2 grid of rectangular adhesive regions, with two electrodes and thus two cells per rectangle. Our method obtained 70 +/- 1% fidelity versus 17 +/- 1% when using an existing cell-registration technique. By allowing the placement of desired numbers of cells at specified locations, this approach addresses many needs to manipulate and register cells to the surfaces of biosensors and other devices with high precision and fidelity.

Cytoskeletal mechanics in adherent human airway smooth muscle cells: probe specificity and scaling of protein-protein dynamics

We probed elastic and loss moduli in the adherent human airway smooth muscle cell through a variety of receptor systems, each serving as a different molecular window on cytoskeletal dynamics. Coated magnetic microbeads were attached to the cell surface via coating-receptor binding. A panel of bead coatings was investigated: a peptide containing the sequence RGD, vitronectin, urokinase, activating antibody against beta(1)-integrin, nonactivating antibody against beta(1)-integrin, blocking antibody against beta(1)-integrin, antibody against beta(1)-integrin, and acetylated low-density lipoprotein. An oscillatory mechanical torque was applied to the bead, and resulting lateral displacements were measured at baseline, after actin disruption by cytochalasin D, or after contractile activation by histamine. As expected, mechanical moduli depended strongly on bead type and bead coating, differing at the extremes by as much as two orders of magnitude. In every case, however, elastic and loss moduli increased with frequency f as a weak power law, f( x-1). Moreover, with few exceptions, data could be scaled such that elastic and frictional responses depended solely on the power law exponent x. Taken together, these data suggest that power law behavior represents a generic feature of underlying protein-protein dynamics.

The tissue engineeting puzzle: a molecular perspective

The inability of biomaterial scaffolds to functionally integrate into surrounding tissue is one of the major roadblocks to developing new biomaterials and tissue-engineering scaffolds. Despite considerable advances, current approaches to engineering cell-surface interactions fall short in mimicking the complexity of signals through which surrounding tissue regulates cell behavior. Cells adhere and interact with their extracellular environment via integrins, and their ability to activate associated downstream signaling pathways depends on the character of adhesion complexes formed between cells and their extracellular matrix. In particular, alpha5beta1 and alphavbeta3 integrins are central to regulating downstream events, including cell survival and cell-cycle progression. In contrast to previous findings that alphavbeta3 integrins promote angiogenesis, recent evidence argues that alphavbeta3 integrins may act as negative regulators of proangiogenic integrins such as alpha5beta1. This suggests that fibronectin is critical for scaffold vascularization because it is the only mammalian adhesion protein that binds and activates alpha5beta1 integrins. Cells are furthermore capable of stretching fibronectin matrices such that the protein partially unfolds, and recent computational simulations provide structural models of how mechanical stretching affects fibronectin function. We propose a model whereby excessive tension generated by cells in contact to biomaterials may in fact render fibronectin fibrils nonangiogenic and potentially inhibit vascularization. The model could explain why current biomaterials independent of their surface chemistries and textures fail to vascularize.