Dose effect of guidewire position in intravascular brachytherapy

Advances in Design and Development of Lumi-Solve: A Novel Drug-Eluting Photo-Angioplasty Device

PURPOSE

The Lumi-Solve photo-angioplasty drug eluting balloon catheter (DEBc) may afford safety advantages over current DEBc. Lumi-Solve utilises the guidewire (GW) port and lumen to deliver fibre-optic UV365nm light to the angioplasty balloon which may be problematic. We explore and evaluate alternative Lumi-Solve design options to circumvent fibre-optic use of the GW port and lumen which may enhance efficacy and clinical utility.

METHODS

Effects of guidewire shadowing (GWS) on visible and UV365nm light transmission were evaluated and modelled in-silico. To evaluate the effect of a dedicated intra-balloon fibre-optic port, modified angioplasty balloons and sections of translucent polyethylene terephthalate (PET) GW port tubing were utilised. Investigation of the effect of GWS on chemical and biological photo-activation of balloon surface drug was performed utilising LCMS analysis and inhibition of histone deacetylase activity (HDACi) was measured in human umbilical vein endothelial cells (HUVEC).

RESULTS

Parallel fibre-optic and GW port configurations generated a GWS of approximately 18.0% of the evaluable balloon surface area and attenuated both visible and UV light intensity by 20.0-25.0% and reduced chemical photo-activation of balloon surface drug and HDACi by at least 40-45%. Alternative fibre-optic port configurations including a spiral design significantly mitigated GWS effects on UV light transmission.

CONCLUSIONS

To avoid use of the GW port and its associated complications a dedicated third port and lumen for the Lumi-Solve fibre-optic may be required. To maximize balloon surface chemical and biological photo-activation, non-parallel, intra-balloon, fibre-optic lumen trajectories, including a spiral design may be useful.

A retrospective analysis of catheter-based sources in intravascular brachytherapy

PURPOSE

Coronary artery disease involves the deposition of plaque along the walls of a coronary artery leading to narrowed or blocked vessels (stenosis) and is one of the main causes of death in developed countries. Percutaneous transluminal coronary angioplasty (PTCA) is used to reverse stenosis. Restenosis (renarrowing) of the treated vessel is a major complication of PTCA. A metal mesh tube (stent) can be placed inside the vessel to prevent restenosis. Tissue stress incurred during PTCA and stenting can provoke neointimal cell proliferation leading to in-stent restenosis (ISR). Intravascular brachytherapy (IVBT), a form of internal radiotherapy, is used to treat ISR. Renewed interest in IVBT is being expressed as a treatment for patients with ISR in drug-eluting stents. Current treatment planning (TP) of IVBT is extremely limited and assumes human tissue can be approximated by water. The interactions of arterial plaque, guidewires, and the stent have been shown to attenuate radiation significantly but are ignored in TP. Other models have determined the degree of attenuation by each factor in isolation. For the first time, we create a model with several inhomogenities present to determine whether attenuation by multiple inhomogenities combines linearly or if a larger dose reduction than anticipated is realized. We are also able to evaluate a spatial distribution of dose around the source and in arterial walls.

METHODS AND MATERIALS

A dosimetric analysis of two commercially available IVBT systems was performed in a Monte Carlo-based particle simulation (Geant4). Absorbed dose was calculated using a model of a human coronary artery with a calcified plaque and stent. Dose delivered in water was also calculated to evaluate the accuracy of a water approximation.

RESULTS

Dose as a function of θ shows significant variation around IVBT sources. For the Guidant Galileo, dose is reduced by 20% behind stent struts and as much as 66% in a region occluded by the guidewire, plaque, and stent. For the Novoste Beta Cath device, delivered dose is reduced by 19% and 58%, respectively, in the same regions.

CONCLUSIONS

Our findings show that the water approximation used in clinical practice to calculate dose is inaccurate when inhomogeneities are present. Methods proposed for calculating dose perturbations in IVBT may underestimate the magnitude of dose reduction. Increasing source dwell time seems unlikely to resolve dosimetric issues in IVBT. The effectiveness of currently existing β-emitting devices may be reduced in patients with complex lesions at the treatment site. Investigation of new radioisotopes and off-centering devices should be considered to improve dose outcomes.

Dose perturbation of a novel cobalt chromium coronary stent on P32 intravascular brachytherapy: A Monte Carlo study

Intravascular brachytherapy has been adopted for the indication of in-stent restenosis on the basis of results of clinical trials using mainly stainless steel stents. Recently, a new stent made of cobalt-chromium L-605 alloy (CoCr, p=9.22 g/cm3) (MULTI-LINK VISION) was introduced as an alternative to the 316L stainless steel stent design (SS, p=7.87 g/cm3) (MULTI-LINK PENTA). In this work, we used the Monte Carlo code MCNPX to compare the dose distribution for the 32P GALILEO source in CoCr and SS 8 mm stent models. The dose perturbation factor (DPF), defined as the ratio of the dose in water with the presence of a stent to the dose without a stent, was used to compare results. Both stent designs were virtually expanded to diameters of 2.0, 3.0, and 4.0 mm using finite element models. The complicated strut shapes of both the CoCr and SS stents were simplified using circular rings with an effective width to yield a metal-to-tissue ratio identical to that of the actual stents. The mean DPF at a 1 mm tissue depth, over the entire stented length of 8 mm, was 0.935 for the CoCr stent and 0.911 for the SS stent. The mean DPF at the intima (0.05 mm radial distance from the strut outer surface), over the entire stented length of 8 mm, was 0.950 for CoCr, and 0.926 for SS. The maximum DPFs directly behind the CoCr and SS struts were 0.689 and 0.644, respectively. All DPF estimates have a standard deviation of +/-0.6%(k=2), approximating the 95% confidence interval. Although the CoCr stent has a higher effective atomic number and greater density than the SS stent, the DPFs for the two stents are similar, probably because the metal-to-tissue ratio and strut thickness of the CoCr stent are lower than those of the SS stent.

Improving patient-specific dosimetry for intravascular brachytherapy

PURPOSE

Accurate patient-specific dosimetry in intravascular brachytherapy (IVBT) is generally difficult due to the extremely high-dose gradient, complexity of treatment device, and patient-specific geometry (e.g., calcification, stent, curvature, movement of target). The purpose of this study is to analyze quantitatively and systematically the dose effects of calcification, stent, guidewire, and source curvature on clinical dosimetry in an IVBT procedure, and propose a method that can be used to assess these effects in routine clinical practice.

METHODS AND MATERIALS

Monte Carlo techniques were used to calculate 3-D dose distribution in both homogeneous and inhomogeneous media for three most commonly used IVBT sources: (90)Sr beta (Novoste), (192)Ir gamma (Cordis/Best), and (32)P beta (Guidant). Dosimetric perturbations in the presence of metallic stents, calcified plaques, metallic guide wires, and source curvature were studied for situations commonly encountered in the clinic. The importance of each of these perturbations and their practical influence on patient-specific dosimetry were analyzed. Factors (plaque, stent, guidewire, and curvature) that may be used to correct/reduce these perturbations were introduced to prevent dosimetric cold spots during IVBT. Practical methods of using these correction factors are proposed.

RESULTS

Dose perturbations are significant due to the presence of source curvature, metallic stents, calcified plaques, and metallic guide wires, especially for beta sources. These perturbations can be as high as 30% under normal clinical conditions, although they can be much higher in extreme situations. Empirical relationships of plaque factor with the thickness of calcified plaque, stent factor with stent metallic surface area, guidewire with guidewire thickness, and curvature factor with the bending angle are derived. These relationships are found to be useful in improving clinical dose accuracy in IVBT treatment planning or dose evaluation after treatment.

CONCLUSIONS

Significant dose perturbations due to the presence of source curvature, metallic stents, calcified plaques, and guide wires have been found in IVBT for in-stent restenosis. Because it has been reported that, with the current prescriptions for IVBT, higher doses consistently improve treatment outcomes, the empirical method derived from this work can be used to assess cold spots dosimetrically, thus improving patient-specific dosimetry for IVBT.

β-Radiation for the Creation of Linear Lesions in the Canine Atrium

Background— Creating linear lesions is important for the treatment of arrhythmias such as atrial flutter and fibrillation. Making these lesions with standard radiofrequency catheters can be difficult and may result in charring and thrombosis. The purpose of this study was to evaluate β-radiation as a novel energy source for creating linear myocardial lesions.

Methods and Results— Eight dogs with intact conduction across the cavotricuspid isthmus were studied. The isthmus was irradiated (25 to 50 Gy) with strontium/yttrium-90 delivered via a deflectable 7F catheter (Novoste Corporation). There were no immediate effects, but bidirectional conduction block developed during follow-up studies in 7 of 8 dogs. The dog without conduction block received 25 Gy. After the animals were euthanized, histology revealed transmural, linear areas of fibrosis without any thrombus.

Conclusions— β-Radiation can safely and effectively create linear lesions that are contiguous and nonthrombogenic. This energy source may become an interesting adjunct to radiofrequency for the treatment of atrial flutter and fibrillation.