Magnetic separation of micro-spheres from viscous biological fluids

On-chip immuno-agglutination assay based on a dynamic magnetic bead clump and a sheath-less flow cytometry

Immunoagglutination assay is a promising approach for the detection of waterborne analytes like virus, cells, proteins with its advantages such as a smaller amount of reagents and easier operation. This paper presents a microfluidic agglutination assay on which all the assay processes including analyte capture, agglutination, and detection are performed. The chip integrates an on-chip pump for sample loading, a dynamic magnetic bead (MB) clump for analyte capture and agglutination, and a sheath-less flow cytometry for particle detection, sizing, and counting. The chip is tested with streptavidin-coated MBs and biotinylated bovine serum albumin as a model assay, which realizes a limit of detection (LOD) of 1 pM. Then, an antigen/antibody assay using rabbit IgG and goat anti-rabbit IgG coated MBs is tested and a LOD of 5.5 pM is achieved. At last, human ferritin in 10% fetal bovine serum is tested with Ab-functionalized MBs and the detection achieves a LOD of 8.5 pM. The whole procedure takes only 10 min in total.

Biomedical applications of high gradient magnetic separation: progress towards therapeutic haeomofiltration

High gradient magnetic separation is a well-established technology in the mineral processing industry, and has been used for decades in the bioprocessing industry. Less well known is the increasing role that high gradient magnetic separation is playing in biomedical applications, for both diagnostic and therapeutic purposes. We review here the state of the art in this emerging field, with a focus on therapeutic haemofiltration, the key enabling technologies relating to the functionalisation of magnetic nanoparticles with target-specific binding agents, and the development of extra-corporeal circuits to enable the in situ filtering of human blood.

Magnetic Particle Plug-Based Assays for Biomarker Analysis

Conventional immunoassays offer selective and quantitative detection of a number of biomarkers, but are laborious and time-consuming. Magnetic particle-based assays allow easy and rapid selection of analytes, but still suffer from the requirement of tedious multiple reaction and washing steps. Here, we demonstrate the trapping of functionalised magnetic particles within a microchannel for performing rapid immunoassays by flushing consecutive reagent and washing solutions over the trapped particle plug. Three main studies were performed to investigate the potential of the platform for quantitative analysis of biomarkers: (i) a streptavidin-biotin binding assay; (ii) a sandwich assay of the inflammation biomarker, C-reactive protein (CRP); and (iii) detection of the steroid hormone, progesterone (P4), towards a competitive assay. Quantitative analysis with low limits of detection was demonstrated with streptavidin-biotin, while the CRP and P4 assays exhibited the ability to detect clinically relevant analytes, and all assays were completed in only 15 min. These preliminary results show the great potential of the platform for performing rapid, low volume magnetic particle plug-based assays of a range of clinical biomarkers via an exceedingly simple technique.

A comprehensivein vitroinvestigation of a portable magnetic separator device for human blood detoxification

A portable magnetic separator device is being developed for a proposed magnetically based detoxification system. In this paper, the performance of this device was evaluated via preliminary in vitro flow experiments using simple fluids and a separator unit consisting of one tube and two metal wires, each at the top and bottom of the tube. The effects of the following factors were observed: mean flow velocity U(o) (0.14-45 cm s(-1)), magnetic field strength micro(o)H(o) (0.125-0.50 T), wire size R(w) (0.125, 0.250 and 0.500 mm), wire length L(w) (2, 5 and 10 cm), wire materials (nickel, stainless steel 304 and 430) and tube size (outer radius R(o) = 0.30 mm and inner radius R(i) = 0.25 mm; R(o) = 0.50 mm and R(i) = 0.375 mm; and R(o) = 2.0 mm and R(i) = 1.0 mm). Our observations showed that the experimental results fit well with the corresponding theoretical results from the model we previously developed at a low flow velocity area (for example, U(o) < or = 20 cm s(-1)), strong external magnetic field (for example, > or = 0.30 T) and long wire length (for example, L(w) = 10 cm). The experimental results also showed that more than 90% capture efficiency is indeed achievable under moderate systemic and operational conditions. Pressure drop measurements revealed that the device could work well under human physiological and clinical conditions, and sphere buildup would not have any considerable effect on the pressure drop of the device. The breakthrough experiments demonstrated that a lower flow rate V, higher applied magnetic field micro(o)H(o) and diluted sphere suspension, i.e. lower C(o), would delay the breakthrough. All the results indicate the promise of this portable magnetic separator device to efficiently in vivo sequestrate nano-/micro-spheres from blood flow in the future magnetically based detoxification system.

Three-dimensional modeling of a portable medical device for magnetic separation of particles from biological fluids

A portable separator has been developed to quantitatively separate blood-borne magnetic spheres in potentially high-flow regimes for the human detoxification purpose. In the separator design, an array of biocompatible capillary tubing and magnetizable wires is immersed in an external magnetic field that is generated by two permanent magnets. The wires are magnetized and the high magnetic field gradient from the magnetized wires helps to collect blood-borne magnetic nano/micro-spheres from the blood flow. In this study, a 3D numerical model was created and the effect of tubing-wire configurations on the capture efficiency of the system was analyzed using COMSOL Multiphysics 3.3(R). The results showed that the configuration characterized by bi-directionally alternating wires and tubes was the best design with respect to the four starting configurations. Preliminary in vitro experiments verified the numerical predictions. The results helped us to optimize a prototype portable magnetic separator that is suitable for rapid sequestration of magnetic nano/micro-spheres from the human blood stream while accommodating necessary clinical boundary conditions.