Enhanced performance of dicationic ionic liquid electrolytes by organic solvents

Unveiling the Impact of Tailoring Ionic Conductor Characteristics on the Performance of Wearable Triboelectric Nanogenerators

This work reveals the correlation between the performance of triboelectric nanogenerators (TENGs) and the characteristics of deformable solid-state ionic conductors (referred to as ionogels). For this purpose, we modify ionogel characteristics by incorporating additional plasticizers (propylene carbonate) and solid salts (lithium bis(trifluoromethylsulfonyl)imide) into the ionogels. We conclude that the high capacitance of the ionogel is crucial for achieving a high-performance TENG platform. The optimized ionogel-based TENG (i-TENG) exhibits a power density of ∼372.4 mW·m-2 (based on 95 V and 36 mA·m-2 outputs) with outstanding long-term stability over 2 weeks. Additionally, successful demonstrations of wearable nanogenerators are performed by leveraging the high stretchability (up to ∼1000%) and optical transparency (∼90%) of the ionogels. Overall, the results provide insight into the design of deformable ionic conductors for high-performance, reliable, and wearable TENGs.

Electrotunable friction with ionic liquid lubricants

Room-temperature ionic liquids and their mixtures with organic solvents as lubricants open a route to control lubricity at the nanoscale via electrical polarization of the sliding surfaces. Electronanotribology is an emerging field that has a potential to realize in situ control of friction-that is, turning the friction on and off on demand. However, fulfilling its promise needs more research. Here we provide an overview of this emerging research area, from its birth to the current state, reviewing the main achievements in non-equilibrium molecular dynamics simulations and experiments using atomic force microscopes and surface force apparatus. We also present a discussion of the challenges that need to be solved for future applications of electrotunable friction.

Structural Reorganization of Ionic Liquid Electrolyte by a Rapid Charge/Discharge Circle

The behavior of forming layers near the electrode surface is an important topic for the energy storage with ionic liquid (IL) electrolytes. Here, molecular dynamics (MD) simulations were used to study the behavior of surface active ionic liquid (SAIL) electrolytes near positive electrodes. With the increase of electrode surface charge density, a V-type conformation of the anion [AOT]^- for energy storage was shown. The V conformation is easier to replace the latent voids, which is like wedging ions into the layer near the electrodes. Meanwhile, after a rapid charge/discharge circle, there would be more V-type anions appearing in this optimized electrolyte. It is a significant point for the mechanism of nanoscale and microscale energy storage, which provides a theoretical basis for the optimization of efficient IL electrolytes and the design of related experimental research.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

Structural Forces in Mixtures of Ionic Liquids with Organic Solvents

Using molecular dynamics simulations, we study the impact of electrode charging and addition of solvent (acetonitrile, ACN) on structural forces of the BMIM PF₆ ionic liquid (IL) confined by surfaces at nanometer separations. We establish relationships between the structural forces and the microscopic structure of the confined liquid. Depending on the structural arrangements of cations and anions across the nanofilm, the load-induced squeeze-out of liquid layers occurs via one-layer or bilayer steps. The cations confined between charged plates orient with their aliphatic chain perpendicular to the surface planes and link two adjacent IL layers. These structures facilitate the squeeze-out of single layers. For both pure IL and IL-ACN mixtures, we observe a strong dependence of nanofilm structure on the surface charge density, which affects the simulated pressure-displacement curves. Addition of solvent to the IL modifies the layering in the confined film. At high electrode charges and high dilution of IL (below 10% molar fraction), the layered structure of the nanofilm is less well defined. We predict a change in the squeeze-out mechanism under pressure, from a discontinuous squeeze-out (for high IL concentrations) to an almost continuous one (for low IL concentrations). Importantly, our simulations show that charged electrodes are coated with ions even at low IL concentrations. These ion-rich layers adjacent to the charged plate surfaces are not squeezed out even under very high normal pressures of ∼5 GPa. Hence, we demonstrate the high performance of IL-solvent mixtures to protect surfaces from wear and to provide lubrication at high loads.

Effects of Solvent Concentration on the Performance of Ionic-Liquid/Carbon Supercapacitors

We use molecular dynamics simulations to investigate the effects of solvent concentration on the bulk properties of an ion liquid electrolyte and the electrochemical performance on carbon-based electrodes, including pristine graphene, oxidized graphene, graphene armchair edge, graphene zigzag edge, onion-like carbon, and slit-pore carbon. We find that diluting the electrolyte reduces the number of ion pairs in the bulk and improves ion dynamics. The capacitance of the two-edge electrodes decreases monotonically as the solvent concentration increases, while the capacitance of other nonedge electrodes exhibits nonmonotonic behavior and a capacitance maximum is observed. Further analyses on the electric double layer reveals two competing factors: solvation reduces the charge overscreening effect, but it also causes the dilution of absorbed ion concentration. While the former increases the capacitance in the low dilution regime, the latter decreases the capacitance in the high dilution regime. In addition, the dilution also significantly improves the ion dynamics at the interface. Our simulation results demonstrate that diluting an ionic liquid electrolyte could potentially boost the power density while maintaining or even slightly increasing the energy density with a careful selection of solvent concentrations on a nonedge carbon electrode.

Adding Solvent into Ionic Liquid-Gated Transistor: The Anatomy of Enhanced Gating Performance

Most studies of ionic liquid (IL)-gated field effect transistors (FETs) focus on the extremely large electric field and capacitance induced in liquid/solid interfaces and correspondingly the significantly enhanced carrier density in semiconductors, which can appreciably improve the gating performance. However, how to boost the switching speed, another key property of gating performance of FETs, has been rarely explored. In this work, the gating performance of molybdenum disulfide (MoS₂) FETs, gated by the mixtures of IL/organic solvent (1-butyl-3-methylimidazolium tetrafluoroborate/acetonitrile, [Bmim][BF₄]/ACN) at different ion concentrations, is investigated for both dynamic and static properties by a combination of molecular dynamics simulation and resistance network analysis. Results reveal that organic solvent can speed up the IL response time by a factor of about 40 times at the optimal ion concentration of 1.94 M, which is mainly attributed to the increased ionic conductivity of IL via the addition of organic solvent. Meanwhile, the surface charge distribution of MoS₂ becomes more homogenous after the addition of organic solvent, which increases the conductivity of MoS₂ by up to 2.4 times. Surprisingly, the optimal ion concentration for increased switching speed is nearly the same as that for achieving the highest MoS₂ conductivity. Thus, our findings provide a strategy to simultaneously improve the dynamic and static gating performance of IL-gated FETs as well as a modeling technique to screen out the ideal ion concentration.

Computational Insights into Materials and Interfaces for Capacitive Energy Storage

Supercapacitors such as electric double-layer capacitors (EDLCs) and pseudocapacitors are becoming increasingly important in the field of electrical energy storage. Theoretical study of energy storage in EDLCs focuses on solving for the electric double-layer structure in different electrode geometries and electrolyte components, which can be achieved by molecular simulations such as classical molecular dynamics (MD), classical density functional theory (classical DFT), and Monte-Carlo (MC) methods. In recent years, combining first-principles and classical simulations to investigate the carbon-based EDLCs has shed light on the importance of quantum capacitance in graphene-like 2D systems. More recently, the development of joint density functional theory (JDFT) enables self-consistent electronic-structure calculation for an electrode being solvated by an electrolyte. In contrast with the large amount of theoretical and computational effort on EDLCs, theoretical understanding of pseudocapacitance is very limited. In this review, we first introduce popular modeling methods and then focus on several important aspects of EDLCs including nanoconfinement, quantum capacitance, dielectric screening, and novel 2D electrode design; we also briefly touch upon pseudocapactive mechanism in RuO2. We summarize and conclude with an outlook for the future of materials simulation and design for capacitive energy storage.

Ionic Liquids for Supercapacitor Applications

Supercapacitors are electrochemical energy storage devices in which the charge is accumulated through the adsorption of ions from an electrolyte on the surface of the electrode. Because of their large ionic concentrations, ionic liquids have widely been investigated for such applications. The main properties that have to be optimized are the electrochemical window, the electrical conductivity, and the interfacial capacitances. Ionic liquids allow a significant improvement of the former, but they suffer from their high viscosity. In this review, I will discuss the advantages and the inconvenience of using ionic liquids in supercapacitors. Some innovative approaches using mixtures of ionic liquids or redox-active ions will also be critically addressed.