Controlling magnetism on metal surfaces with non-magnetic means: electric fields and surface charging

Engineering Magnetic Anisotropy of Rhenium Atom in Nitrogenized Divacancy of Graphene

The effects of charging on the magnetic anisotropy energy (MAE) of rhenium atom in nitrogenized-divacancy graphene (Re@NDV) are investigated using density functional theory (DFT) calculations. High-stability and large MAE of 71.2 meV are found in Re@NDV. The more exciting finding is that the magnitude of MAE of a system can be tuned by charge injection. Moreover, the easy magnetization direction of a system may also be controlled by charge injection. The controllable MAE of a system is attributed to the critical variation in d_z² and d_yz of Re under charge injection. Our results show that Re@NDV is very promising in high-performance magnetic storage and spintronics devices.

Mechanochemical Effects of Adsorbates at Nanoelectromechanical Switch Contacts

Herein, classical molecular dynamics simulations are used to examine nanoscale adsorbate reactions during the cyclic opening and closing of nanoelectromechanical system (NEMS) switches. We focus upon how reactions change metal/metal conductive contact area, asperity morphology, and plastic deformation. We specifically consider Pt, which is often used as an electrode material for NEMS switches. The structural evolution of asperity contacts in gaseous environments with molecules which can potentially form tribopolymers is determined by various factors, for example, contact forces, partial pressure and molecular weight of gas, and the fundamental reaction rates of surface adsorption and adsorbate linkages. The modeled systems exhibit significant changes during the first few cycles, but as the number of contact cycles increases, the system finds a steady-state where the morphologies, Pt/Pt contact area, oligomer chain lengths, amount of Pt transfer between opposing surfaces, and deformation rate stabilize. The stress generated during asperity contact increases the rate of reactions among the adsorbates in the contact region. This makes the size of the adsorbate molecules increase and thus more exposed metal, which implies higher electrical conductance in the closed contact, but more plastic deformation, metal-metal transfer, and mechanical work expended in each contact cycle.

Voltage-Control of Magnetism in All-Solid-State and Solid/Liquid Magnetoelectric Composites

The control of magnetism by means of low-power electric fields, rather than dissipative flowing currents, has the potential to revolutionize conventional methods of data storage and processing, sensing, and actuation. A promising strategy relies on the utilization of magnetoelectric composites to finely tune the interplay between electric and magnetic degrees of freedom at the interface of two functional materials. Albeit early works predominantly focused on the magnetoelectric coupling at solid/solid interfaces; however, recently there has been an increased interest related to the opportunities offered by liquid-gating techniques. Here, a comparative overview on voltage control of magnetism in all-solid-state and solid/liquid composites is presented within the context of the principal coupling mediators, i.e., strain, charge carrier doping, and ionic intercalation. Further, an exhaustive and critical discussion is carried out, concerning the suitability of using the common definition of coupling coefficient α C = Δ M Δ E   to compare the strength of the interaction between electricity and magnetism among different magnetoelectric systems.

Large Magnetoelectric Effects in Electrodeposited Nanoporous Microdisks Driven by Effective Surface Charging and Magneto-Ionics

A synergetic approach to enhance magnetoelectric effects (i.e., control of magnetism with voltage) and improve energy efficiency in magnetically actuated devices is presented. The investigated material consists of an ordered array of Co-Pt microdisks, in which nanoporosity and partial oxidation are introduced during the synthetic procedure to synergetically boost the effects of electric field. The microdisks are grown by electrodeposition from an electrolyte containing an amphiphilic polymeric surfactant. The bath formulation is designed to favor the incorporation of oxygen in the form of cobalt oxide. A pronounced reduction of coercivity (88%) and a remarkable increase of Kerr signal amplitude (60%) are observed at room temperature upon subjecting the microdisks to negative voltages through an electrical double layer. These large voltage-induced changes in the magnetic properties of the microdisks are due to (i) the high surface-area-to-volume ratio with ultranarrow pore walls (sub-10 nm) that promote enhanced electric charge accumulation and (ii) magneto-ionic effects, where voltage-driven O^2- migration promotes a partial reduction of CoO to Co at room temperature. This simple and versatile procedure to fabricate patterned "nano-in-micro" magnetic motifs with adjustable voltage-driven magnetic properties is very appealing for energy-efficient magnetic recording systems and other magnetoelectronic devices.

Electric-field-driven switching of individual magnetic skyrmions

Controlling magnetism with electric fields is a key challenge to develop future energy-efficient devices. The present magnetic information technology is mainly based on writing processes requiring either local magnetic fields or spin torques, but it has also been demonstrated that magnetic properties can be altered on the application of electric fields. This has been ascribed to changes in magnetocrystalline anisotropy caused by spin-dependent screening and modifications of the band structure, changes in atom positions or differences in hybridization with an adjacent oxide layer. However, the switching between states related by time reversal, for example magnetization up and down as used in the present technology, is not straightforward because the electric field does not break time-reversal symmetry. Several workarounds have been applied to toggle between bistable magnetic states with electric fields, including changes of material composition as a result of electric fields. Here we demonstrate that local electric fields can be used to switch reversibly between a magnetic skyrmion and the ferromagnetic state. These two states are topologically inequivalent, and we find that the direction of the electric field directly determines the final state. This observation establishes the possibility to combine electric-field writing with the recently envisaged skyrmion racetrack-type memories.

Mechanisms of Contact, Adhesion, and Failure of Metallic Nanoasperities in the Presence of Adsorbates: Toward Conductive Contact Design

The properties of contacting interfaces are strongly affected not only by the bulk and surface properties of contacting materials but also by the ubiquitous presence of adsorbed contaminants. Here, we focus on the properties of single asperity contacts in the presence of adsorbates within a molecular dynamics description of metallic asperity normal contact and a parametric description of adsorbate properties. A platinum-platinum asperity contact is modeled with adsorbed oligomers with variable properties. This system is particularly tailored to the context of nanoelectromechanical system (NEMS) contact switches, but the results are generally relevant to metal-metal asperity contacts in nonpristine conditions. Even though mechanical forces can displace adsorbate out of the contact region, increasing the adsorbate layer thickness and/or adsorbate/metal adhesion makes it more difficult for metal asperity/metal surface contact to occur, thereby lowering the electrical contact conductance. Contact separation is a competition between plastic necking in the asperity or decohesion at the asperity/substrate interface. The mechanism which operates at a lower tensile stress dominates. Necking dominates when the adsorbate/metal adhesion is strong and/or the adsorbate layer thickness is small. In broad terms, necking implies larger asperity deformation and mechanical work, as compared with decohesion. Optimal NEMS switch performance requires substantial contact conductance and minimal asperity deformation; these results indicate that these goals can be achieved by balancing the quantity of adsorbates and their adhesion to the metal surface.

Non-Volatile Ferroelectric Switching of Ferromagnetic Resonance in NiFe/PLZT Multiferroic Thin Film Heterostructures

Magnetoelectric effect, arising from the interfacial coupling between magnetic and electrical order parameters, has recently emerged as a robust means to electrically manipulate the magnetic properties in multiferroic heterostructures. Challenge remains as finding an energy efficient way to modify the distinct magnetic states in a reliable, reversible, and non-volatile manner. Here we report ferroelectric switching of ferromagnetic resonance in multiferroic bilayers consisting of ultrathin ferromagnetic NiFe and ferroelectric Pb0.92La0.08Zr0.52Ti0.48O3 (PLZT) films, where the magnetic anisotropy of NiFe can be electrically modified by low voltages. Ferromagnetic resonance measurements confirm that the interfacial charge-mediated magnetoelectric effect is dominant in NiFe/PLZT heterostructures. Non-volatile modification of ferromagnetic resonance field is demonstrated by applying voltage pulses. The ferroelectric switching of magnetic anisotropy exhibits extensive applications in energy-efficient electronic devices such as magnetoelectric random access memories, magnetic field sensors, and tunable radio frequency (RF)/microwave devices.

Tuning an Atomic Switch on a Surface with Electric and Magnetic Fields

Controllable switching an adatom position and its magnetization could lead to a single-atom memory. Our theoretical studies show that switching adatom between different surface sites by the quantum tunneling, discovered in several experiments, can be controlled by an external electric field. Switching a single spin by magnetic fields is found to be strongly site-dependent on a surface. This could enable to control a spin-dynamics of adatom.