Effect of coadsorbent on the photovoltaic performance of squaraine sensitized nanocrystalline solar cells

Bifacial Dye-Sensitized Solar Cells Utilizing Visible and NIR Dyes: Implications of Dye Adsorption Behaviour

Bifacial dye-sensitized solar cells (DSSCs) were fabricated utilizing dye cocktails of two dyes, Z-907 and SQ-140, which have complementary light absorption and photon harvesting in the visible and near-infrared wavelength regions, for panchromatic photon harvesting. The investigation of the rate of dye adsorption and the binding strengths of the dyes on mesoporous TiO₂ corroborated the finding that the Z-907 dye showed a rate of dye adsorption that was about >15 times slower and a binding that was about 3 times stronger on mesoporous TiO₂ as compared to SQ-140. Utilizing the dye cocktails Z-907 and SQ-140 from ethanol, the formation of the dye bilayer, which was significantly influenced by the ratio of dyes and adsorption time, was demonstrated. It was demonstrated that the dyes of Z-907 and SQ-140 prepared in 1:9 or 9:1 molar ratios favoured the dye bilayer formation by subtly controlling the adsorption time. In contrast, the 1:1 ratio counterpart was prone to form mixed dye adsorption; the best performance of the BF-DSSCs was shown when a dye cocktail of Z-907 and SQ-140 in a molar 9:1 ratio was used to prepare a photoanode for 1 h of dye adsorption. The BF-DSSCs thus exhibited PCEs of 4.23% and 3.48% upon the front and rear side light illuminations, a cumulated PCE of 7.71%, and a very good BBF of 83%.

Effects of physical orientation of dye molecules and molecular orbitals on performance of solid-state dye sensitized solar cells

Performance of Dye-sensitized devices depends on the photon absorption and carrier injection properties of the sensitizer (dye). The orientation of the dye molecule affects the photon absorption cross-section, injection efficiency and carrier transport. These effects are studied, using three variants of cyanine dyes in n-TiO₂/Dye/p-CuSCN heterojunction. The results show correlation of dye-molecule's orientation on the short-circuit-photocurrent (I_sc). The open-circuit-voltage (V_oc) is also subjective. The orientation of the dye molecule influence the photon-harvesting efficiency and obstruct the hole-conductor penetrating onto the working-electrode. Additionally, Cumulative effects of e-e, e-h, spin-coupling and HOMO/LUMO distribution are identified.

Electrolyte containing lithium cation in squaraine-sensitized solar cells: interactions and consequences for performance and charge transfer dynamics

By optimizing the lithium concentration in an electrolyte to 50 mmol L^-1 and the dye-to-chenodeoxycholic acid ratio in a VG1-based dye solution, we achieved 4.7% power conversion efficiency under standard AM 1.5G conditions. In addition to this performance, we herein discuss the role played by lithium in the electrolyte and its interplay in the charge transfer processes from ms to fs dynamics. Based on electrochemical impedance spectroscopy, photoluminescence and pump-probe transient absorption spectroscopy, we conclude that although lithium increases the electron diffusion length, this has no satisfactory impact on electron injection and even slows dye regeneration. This study provides evidence that lithium is not only specifically adsorbed on the surface of TiO₂ but prompts a molecular reorganization of the self-assembled dye monolayer, forming harmful H-aggregates.

Efficient near infrared fluorescence detection of elastase enzyme using peptide-bound unsymmetrical squaraine dye

Extended wavelength analyte-responsive fluorescent probes are highly desired for the imaging applications owing to their deep tissue penetration, and minimum interference from autofluorescence by biomolecules. Near infra-red (NIR) sensitive and self-quenching fluorescent probe based on the dye-peptide conjugate (SQ 1 PC) was designed and synthesized by facile and efficient one-pot synthetic route for the detection of Elastase activity. In the phosphate buffer solution, there was an efficient quenching of fluorescence of SQ 1 PC (86%) assisted by pronounced dye-dye interaction due to H-aggregate formation. Efficient and fast recovery of this quenched fluorescence of SQ 1 PC (> 50% in 30s) was observed on hydrolysis of this peptide-dye conjugate by elastase enzyme. Presently designed NIR sensitive self-quenching substrate offers the potential application for the detection of diseases related to proteases by efficient and fast detection of their activities.

Optical Absorption Spectra and Electronic Properties of Symmetric and Asymmetric Squaraine Dyes for Use in DSSC Solar Cells: DFT and TD-DFT Studies

The electronic absorption spectra, ground-state geometries and electronic structures of symmetric and asymmetric squaraine dyes (SQD1–SQD4) were investigated using density functional theory (DFT) and time-dependent (TD-DFT) density functional theory at the B3LYP/6-311++G** level. The calculated ground-state geometries reveal pronounced conjugation in these dyes. Long-range corrected time dependent density functionals Perdew, Burke and Ernzerhof (PBE, PBE1PBE (PBE0)), and the exchange functional of Tao, Perdew, Staroverov, and Scuseria (TPSSh) with 6-311++G** basis set were employed to examine optical absorption properties. In an extensive comparison between the optical data and DFT benchmark calculations, the BEP functional with 6-311++G** basis set was found to be the most appropriate in describing the electronic absorption spectra. The calculated energy values of lowest unoccupied molecular orbitals (LUMO) were 3.41, 3.19, 3.38 and 3.23 eV for SQD1, SQD2, SQD3, and SQD4, respectively. These values lie above the LUMO energy (−4.26 eV) of the conduction band of TiO₂ nanoparticles indicating possible electron injection from the excited dyes to the conduction band of the TiO₂ in dye-sensitized solar cells (DSSCs). Also, aromaticity computation for these dyes are in good agreement with the data obtained optically and geometrically with SQD4 as the highest aromatic structure. Based on the optimized molecular geometries, relative positions of the frontier orbitals, and the absorption maxima, we propose that these dyes are suitable components of photovoltaic DSSC devices.

Surface Modification of TiO2 Photoanodes with Fluorinated Self-Assembled Monolayers for Highly Efficient Dye-Sensitized Solar Cells

Dye aggregation and electron recombination in TiO2 photoanodes are the two major phenomena lowering the energy conversion efficiency of dye-sensitized solar cells (DSCs). Herein, we introduce a novel surface modification strategy of TiO2 photoanodes by the fluorinated self-assembled monolayer (F-SAM) formation with 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFTS), blocking the vacant sites of the TiO2 surface after dye adsorption. The F-SAM helps to efficiently lower the surface tension, resulting in efficient repelling ions, e.g., I3(-), in the electrolyte to decrease the electron recombination rate, and the role of F-SAM is characterized in detail by impedance spectroscopy using a diffusion-recombination model. In addition, the dye aggregates on the TiO2 surface are relaxed by the F-SAM with large conformational perturbation (i.e., helix structure) seemingly because of steric hindrance developed during the SAM formation. Such multifunctional effects suppress the electron recombination as well as the intermolecular interactions of dye aggregates without the loss of adsorbed dyes, enhancing both the photocurrent density (11.9 → 13.5 mA cm(-2)) and open-circuit voltage (0.67 → 0.72 V). Moreover, the combined surface modification with the F-SAM and the classical coadsorbent further improves the photovoltaic performance in DSCs.

β-Functionalized Push-Pull Porphyrin Sensitizers in Dye-Sensitized Solar Cells: Effect of π-Conjugated Spacers

A series of new β-functionalized push-pull-structured porphyrin dyes were synthesized so as to investigate the effect of the π-conjugated spacer on the performance of dye-sensitized solar cells (DSSCs). Suzuki- and Heck-type palladium-catalyzed coupling methodologies were used to obtain various β-functionalized porphyrins and β-benzoic acid (ZnPHn) and β-vinylbenzoic acid (ZnPVn) derivatives from β-borylated porphyrin precursors. Photophysical studies of the resulting porphyrins revealed a clear dependence on the nature of the β linker. In particular, it was found that a β-vinylene linkage perturbs the electronic structure of the porphyrin core; this is less true for a β-phenyl linkage. Theoretical analyses provided support for the intrinsic intramolecular charge-transfer character of the β-functionalized, push-pull porphyrins of this study. The extent of charge transfer depends on the nature of the β-conjugated linkage. The photovoltaic performances of the cells sensitized with β-phenylenevinylene ZnPVn exhibited higher power conversion efficiency values than those bearing β-phenyl linkages (ZnPHn). This was ascribed to differences in light-harvesting efficiency. Furthermore, compared to the use of a standard iodine-based electrolyte, the DSSC performance of cells made from the present porphyrins was improved by more than 1 % upon using a cobalt(II/III)-based electrolyte. Under standard AM 1.5 illumination, the highest efficiency, 8.2 %, was obtained by using cells made from the doubly β-butadiene-linked porphyrin.

Co-adsorbents: a key component in efficient and robust dye-sensitized solar cells

Since the establishment of dye-sensitized solar cells in the early '90s, both the efficiency and stability of these third generation photovoltaics have been greatly enhanced. Nevertheless, there still exist many unwanted processes that impede operation of dye-sensitized solar cells, encumbering the achievement of the maximum theoretical power conversion efficiency and decreasing the devices' long-term operation. These processes include charge recombination, dye aggregation, dye desorption, and high protonation degrees of the semiconductor's surface. This Minireview focuses on a powerful strategy developed to address these problems, namely the use of co-adsorbents. All types of co-adsorbents utilized thus far are categorized in terms of the chemical identity of their anchoring group; in addition their operational mechanisms are presented and the properties that a functional molecule should possess to be applied as an efficient co-adsorbent are discussed.

Amplification of light collection in solid-state dye-sensitized solar cells via the antenna effect through supramolecular assembly

Efficient energy transfer steps from an organic antenna bound via supramolecular interactions to an organic dyad are demonstrated within solid-state dye-sensitized solar cells.

Efficiency of ruthenium dye sensitized solar cells enhanced by 2,6-bis[1-(phenylimino)ethyl]pyridine as a co-sensitizer containing methyl substituents on its phenyl rings

By applying 2,6-bis(iminoalkyl)pyridine into DSSCs as a co-sensitizer, a power-conversion efficiency of 7.32% was achieved, 35% higher than that of N719 sensitized DSSCs.

Anthracene/phenothiazine π-conjugated sensitizers for dye-sensitized solar cells using redox mediator in organic and water-based solvents

Metal-free dyes (MD1 to MD5) containing an anthracene/phenothiazine unit in the spacer have been synthesized. The conversion efficiency (7.13 %) of the dye-sensitized solar cell using MD3 as the sensitizer reached approximately 85 % of the N719-based standard cell (8.47 %). The cell efficiency (8.42 %) of MD3-based dye-sensitized solar cells (DSSCs) with addition of chenodeoxycholic acid is comparable with that of N719-based standard cell. The MD3 water-based DSSCs using a dual-TEMPO (2,2,6,6-tetramethylpiperidine-N-oxyl)/iodide electrolyte exhibited very promising cell performance of 4.96 % with an excellent Voc of 0.77 V.

Sequential “click” functionalization of mesoporous titania for energy-relay dye enhanced dye-sensitized solar cells

Energy relay dyes (ERDs) were immobilized in vicinity of energy-accepting injection dyes (IDs) via a sequential functionalization approach of mesoporous titania photo anodes in dye-sensitized solar cells.

Phenothiazinedioxide-conjugated sensitizers and a dual-TEMPO/iodide redox mediator for dye-sensitized solar cells

Metal-free dyes containing a phenothiazinedioxide entity in the spacer were synthesized. The best conversion efficiency (7.47%) of the dye-sensitized solar cell (DSSC) by using new sensitizers with chenodeoxycholic acid as a co-adsorbent and the I(-) /I3 (-) electrolyte reached over 90% of that of the standard N719-based cell (8.10%). A new type of ionic liquid containing the nitroxide radical (N-O(.) ) and iodide was successfully synthesized and applied to the DSSCs. If the I(-) /I3 (-) electrolyte was replaced with a dual redox electrolyte, that is, a TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl) derivative with a dangling imidazolium iodide entity, the cell exhibited a high open-circuit voltage of 0.85 V and a cell efficiency of 8.36%.

A robust organic dye for dye sensitized solar cells based on iodine/iodide electrolytes combining high efficiency and outstanding stability

Among the new photovoltaic technologies, the Dye-Sensitized Solar Cell (DSC) is becoming a realistic approach towards energy markets such as BIPV (Building Integrated PhotoVoltaics). In order to improve the performances of DSCs and to increase their commercial attractiveness, cheap, colourful, stable and highly efficient ruthenium-free dyes must be developed. Here we report the synthesis and complete characterization of a new purely organic sensitizer (RK1) that can be prepared and synthetically upscaled rapidly. Solar cells containing this orange dye show a power conversion efficiency of 10.2% under standard conditions (AM 1.5G, 1000 Wm(-2)) using iodine/iodide as the electrolyte redox shuttle in the electrolyte, which is among the few examples of DSC using an organic dyes and iodine/iodide red/ox pair to overcome the 10% efficiency barrier. We demonstrate that the combination of this dye with an ionic liquid electrolyte allows the fabrication of solar cells that show power conversion efficiencies of up to 7.36% that are highly stable with no measurable degradation of initial performances after 2200 h of light soaking at 65°C under standard irradiation conditions. RK1 achieves one of the best output power conversion efficiencies for a solar cell based on the iodine/iodide electrolyte, combining high efficiency and outstanding stability.

In situ monitoring and optimization of room temperature ultra-fast sensitization for dye-sensitized solar cells

We describe extremely fast dyeing of TiO₂ photo-electrodes for DSCs (<2 min) at room temperature giving η = 7.5%.

Panchromatic symmetrical squaraines: a step forward in the molecular engineering of low cost blue-greenish sensitizers for dye-sensitized solar cells

A new series of low cost dibranched symmetrical blue-greenish squaraines showing interesting photovoltaic properties and photostabilities is reported.

Enhanced light harvesting with a reflective luminescent down-shifting layer for dye-sensitized solar cells

For a dye-sensitized solar cell with a near-infrared squaraine (SQ1) sensitizer, the photovoltaic performance was enhanced remarkably with a reflective luminescent down-shifting (R-LDS) layer to increase the light-harvesting efficiency at the wavelength region 400-550 nm where the SQ1 dye has weak absorption. Relative enhancements greater than 200% in IPCE near 500 nm and 40-54% in JSC were achieved with red phosphor CaAlSiN3:Eu(2+) as the LDS material, attaining 5.0 and 4.8% overall efficiencies of power conversion for the R-LDS layer coated on the counter electrode (front illumination) and working electrode (back illumination), respectively.