The synthesis and characterization of poly(γ-glutamic acid)-coated magnetite nanoparticles and their effects on antibacterial activity and cytotoxicity

Coating Fe3O4 quantum dots with glutamic acid to achieve enhanced catalysis for facile and sensitive detection of chromium(VI) in water

A universal green synthesis approach for Glu-Fe3O4 quantum dots (QDs) with ultrasmall size (∼3.3 nm) and enhanced catalysis was demonstrated using glutamic acid (Glu) as a dopant. Abundant carboxylic groups and amino groups on the surfaces with a zeta potential of -6.28 mV resulted in greatly improved environmental stability. The Glu-Fe3O4 QDs exhibited oxidoreductase-like catalytic activity. The steady-state kinetic assays indicated that the QDs had a high binding affinity for the substrate TMB. A facile and sensitive colorimetric platform was developed using the Glu-Fe3O4 QDs for the detection of Cr(VI) in naturally sourced water and waste water, which showed a detection limit of 31.02 nM, much lower than the maximum Cr(VI) level permitted in drinking water by the World Health Organization (WHO) and the industrial water threshold. This universal green synthesis approach and the unique catalytic activity of Fe3O4 QDs open a new horizon in materials chemistry and the development of colorimetric biosensors for environmental protection and public health.

Investigating the role of poly-γ-glutamic acid in Pennisetum giganteum phytoextraction of mercury-contaminated soil

Farmland mercury (Hg) pollution poses a significant threat to human health, but there is a lack of highly efficient phytoextraction for its remediation at present. This study investigates the impact of poly-γ-glutamic acid (γ-PGA) on the phytoextraction capabilities of Pennisetum giganteum (P. giganteum) in Hg-contaminated soil. Our research indicates that amending γ-PGA to soil markedly enhances the assimilation of soil Hg by P. giganteum and transformation of Hg within itself, with observed increases in Hg concentrations in roots, stems, and leaves by 1.1, 4.3, and 18.9 times, respectively, compared to the control. This enhancement is attributed to that γ-PGA can facilitate the hydrophilic and bioavailable of soil Hg. Besides, γ-PGA can stimulate the abundance of Hg-resistance bacteria Proteobacteria in the rhizosphere of P. giganteum, thus increasing the mobility and uptake of soil Hg by P. giganteum roots. Moreover, the hydrophilic nature of Hg-γ-PGA complexes supports their transport via the apoplastic pathway, across the epidermis, and through the Casparian strip, eventually leading to immobilization in the mesophyll tissues. This study provides novel insights into the mechanisms of Hg phytoextraction, demonstrating that γ-PGA significantly enhances the effectiveness of P. giganteum in Hg uptake and translocation. The findings suggest a promising approach for the remediation of Hg-contaminated soil, offering a sustainable and efficient strategy for environmental management and health risk mitigation.

Poly (γ) glutamic acid: a unique microbial biopolymer with diverse commercial applicability

Microbial biopolymers have emerged as promising solutions for environmental pollution-related human health issues. Poly-γ-glutamic acid (γ-PGA), a natural anionic polymeric compound, is composed of highly viscous homo-polyamide of D and L-glutamic acid units. The extracellular water solubility of PGA biopolymer facilitates its complete biodegradation and makes it safe for humans. The unique properties have enabled its applications in healthcare, pharmaceuticals, water treatment, foods, and other domains. It is applied as a thickener, taste-masking agent, stabilizer, texture modifier, moisturizer, bitterness-reducing agent, probiotics cryoprotectant, and protein crystallization agent in food industries. γ-PGA is employed as a biological adhesive, drug carrier, and non-viral vector for safe gene delivery in tissue engineering, pharmaceuticals, and medicine. It is also used as a moisturizer to improve the quality of hair care and skincare cosmetic products. In agriculture, it serves as an ideal stabilizer, environment-friendly fertilizer synergist, plant-growth promoter, metal biosorbent in soil washing, and animal feed additive to reduce body fat and enhance egg-shell strength.

Poly-Gamma-Glutamic Acid Nanopolymer Effect against Bacterial Biofilms: In Vitro and In Vivo Study

In this study, a biodegradable poly-gamma-glutamic-acid nanopolymer (Ɣ-PGA NP) was investigated for its activity against clinical strains of Gram-positive (Staphylococcus aureus and Streptococcus pyogenes) and Gram-negative (Klebsiella pneumoniae and Escherichia coli), and reference strains of S. aureus ATCC 6538, S. pyogenes ATCC 19615 (Gram-positive), and Gram-negative E. coli ATCC 25922, and K. pneumoniae ATCC 13884 bacterial biofilms. The minimum inhibitory concentration (MIC) effect of Ɣ-PGA NP showed inhibitory effects of 0.2, 0.4, 1.6, and 3.2 μg/mL for S. pyogenes, S. aureus, E. coli, and K. pneumoniae, respectively. Also, MIC values were 1.6, 0.8, 0.2, and 0.2 μg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Afterwards, MBEC (minimum biofilm eradication concentration) and MBIC (minimum biofilm inhibitory concentration) were investigated to detect Ɣ-PGA NPs efficiency against the biofilms. MBEC and MBIC increased with increasing Ɣ-PGA NPs concentration or time of exposure. Interestingly, MBIC values were at lower concentrations of Ɣ-PGA NPs than those of MBEC. Moreover, MBEC values showed that K. pneumoniae was more resistant to Ɣ-PGA NPs than E. coli, S. aureus, and S. pyogenes, and the same pattern was observed in the reference strains. The most effective results for MBEC were after 48 h, which were 1.6, 0.8, 0.4, and 0.2 µg/mL for K. pneumoniae, E. coli, S. aureus, and S. pyogenes, respectively. Moreover, MBIC results were the most impactful after 24 h but some were the same after 48 h. MBIC values after 48 h were 0.2, 0.2, 0.2, and 0.1 μg/mL for K. pneumoniae, E. coli, S. aureus, and S. pyogenes, respectively. The most effective results for MBEC were after 24 h, which were 1.6, 0.8, 0.4, and 0.4 µg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Also, MBIC results were the most impactful after an exposure time of 12 h. MBIC values after exposure time of 12 h were 0.4, 0.4, 0.2, and 0.2 μg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Besides that, results were confirmed using confocal laser scanning microscopy (CLSM), which showed a decrease in the number of living cells to 80% and 60% for MBEC and MBIC, respectively, for all the clinical bacterial strains. Moreover, living bacterial cells decreased to 70% at MBEC while decreasing up to 50% at MBIC with all bacterial refence strains. These data justify the CFU quantification. After that, ImageJ software was used to count the attached cells after incubating with the NPs, which proved the variation in live cell count between the manual counting and image analysis methods. Also, a scanning electron microscope (SEM) was used to detect the biofilm architecture after incubation with the Ɣ-PGA NP. In in vivo wound healing experiments, treated wounds of mice showed faster healing (p < 0.00001) than both the untreated mice and those that were only wounded, as the bacterial count was eradicated. Briefly, the infected mice were treated faster (p < 0.0001) when infected with S. pyogenes > S. aureus > E. coli > K. pneumoniae. The same pattern was observed for mice infected with the reference strains. Wound lengths after 2 h showed slightly healing (p < 0.001) for the clinical strains, while treatment became more obvious after 72 h > 48 h > 24 h (p < 0.0001) as wounds began to heal after 24 h up to 72 h. For reference strains, wound lengths after 2 h started to heal up to 72 h.

Albumin Retains Its Transport Function after Interaction with Cerium Dioxide Nanoparticles

The interaction of inorganic nanomaterials with biological fluids containing proteins can lead not only to the formation of a protein corona and thereby to a change in the biological activity of nanoparticles but also to a significant effect on the structural and functional properties of the biomolecules themselves. This work studied the interaction of nanoscale CeO2, the most versatile nanozyme, with human serum albumin (HSA). Fourier transform infrared spectroscopy, MALDI-TOF mass spectrometry, UV-vis spectroscopy, and fluorescence spectroscopy confirmed the formation of HSA-CeO2 nanoparticle conjugates. Changes in protein conformation, which depend on the concentration of both citrate-stabilized CeO2 nanoparticles and pristine CeO2 nanoparticles, did not affect albumin drug-binding sites and, accordingly, did not impair the HSA transport function. The results obtained shed light on the biological consequences of the CeO2 nanoparticles' entrance into the body, which should be taken into account when engineering nanobiomaterials to increase their efficiency and reduce the side effects.

Green Approach for the Synthesis of Copper Oxide Nanoparticles and its Antibacterial Effect against Methicillin-resistant Staphylococcus aureus (MRSA)

Nowadays, nanotechnology has gained promising advantages in the medical and pharmaceutical field by improving the delivery of drug to the target site. Morinda citrifolia L. belongs to the genus Morinda of the family Rubiaceae and know as ‘Pokok Mengkudu’ in Malay. Aqueous extract of Morinda citrifolia treated with copper (II) sulfate results in the formation of copper oxide nanoparticles. The size of synthesized copper oxide nanoparticles (CuONPs) was 10-30nm spherical in shape using TEM analysis. UV spectrophotometer showed the absorption peak at 306nm. SEM analyses confirm the surface morphology of nanoparticles showed spherical shaped particles. FTIR spectroscopy showed broad absorption bands between 2800 and 4000 cm−1 showed C-O, OH, C=O stretch are associated with nanoparticles. Zeta potential showed the value of 21.8 mV and -6.45 mV confirms the stability of nanoparticles. These CuONPs showed good antibacterial activity against Staphylococcus aureus (ATCC 33591) 20mm, Staphylococcus epidermidis (ATCC 35984) 16 mm, Salmonella typhi, 17mm Escherichia coli (ATCC 25922) 18mm and Vibrio cholerae 20mm. CuONPs also had significant antibacterial properties against Methicillin-resistance Staphylococcus aureus (MRSA) (ATCC 4330). These CuONPs also show good synergistic affect along with Ceftriaxone, Gentamycin and Amoxicillin antibiotic against bacterial pathogens respectively.

Preparation and characterization of glucose-conjugated super-paramagnetic iron oxide nanoparticles (G-SPIONs) for removal of Edwardsiella tarda and Aeromonas hydrophila from water

The present research was conducted to prepare efficient G-SPIONs by co-precipitation to remove Edwardsiella tarda and Aeromonas hydrophila from the aqueous solution. The synthesized G-SPIONs were characterized by UV-Vis spectrophotometer, DLS, FEG-TEM, FT-IR, XRD, and VSM analysis. The results showed that the synthesized G-SPIONs had super-paramagnetic properties (58.31 emu/g) and spherical shape (16 ± 3 nm). The antibacterial activity was assessed in sterilized distilled water at different G-SPIONs concentrations viz. 0, 1.5, 3, 6, 12, 24, 48, 120, and 240 mg/L against E. tarda and A. hydrophila with various bacterial loads viz. 1 × 10³ , 1 × 10⁴ , 1 × 10⁵ , 1 × 10⁶ , and 1 × 10⁷  CFU/ml at different time intervals 15, 30, 45, and 60 min. At a lower bacterial load of E. tarda and A. hydrophila 1 × 10³ -1 × 10⁴  CFU/ml, 100% bacterial load was removed by 15 min exposure with NPs concentration 6-48 mg/L and 1.5-6 mg/L, respectively. Cent percent bacterial removal was observed in both the bacterial species even at higher bacterial load (1 × 10⁵ -1 × 10⁷  CFU/ml) by increasing exposure time (15-60 min) and nanoparticle concentration as well (24-240 mg/L). At an initial bacterial load of E. tarda and A. hydrophila (1 × 10³ -1 × 10⁷  CFU/ml), the EC₅₀ ranged between 0.01-6.51 mg/L and 0.02-3.84 mg/L, respectively, after 15-60 min exposure. Thus, it is concluded that the antibacterial effect of G-SPIONs depends on concentration and exposure time. Hence, G-SPIONs can be used as an antibacterial/biocidal agent to treat Edwardsiellosis and Aeromonosis disease in aquaculture.

Towards machine learning discovery of dual antibacterial drug-nanoparticle systems

Artificial Intelligence/Machine Learning (AI/ML) algorithms may speed up the design of DADNP systems formed by Antibacterial Drugs (AD) and Nanoparticles (NP). In this work, we used IFPTML = Information Fusion (IF) + Perturbation-Theory (PT) + Machine Learning (ML) algorithm for the first time to study of a large dataset of putative DADNP systems composed by >165 000 ChEMBL AD assays and 300 NP assays vs. multiple bacteria species. We trained alternative models with Linear Discriminant Analysis (LDA), Artificial Neural Networks (ANN), Bayesian Networks (BNN), K-Nearest Neighbour (KNN) and other algorithms. IFPTML-LDA model was simpler with values of Sp ≈ 90% and Sn ≈ 74% in both training (>124 K cases) and validation (>41 K cases) series. IFPTML-ANN and KNN models are notably more complicated even when they are more balanced Sn ≈ Sp ≈ 88.5%-99.0% and AUROC ≈ 0.94-0.99 in both series. We also carried out a simulation (>1900 calculations) of the expected behavior for putative DADNPs in 72 different biological assays. The putative DADNPs studied are formed by 27 different drugs with multiple classes of NP and types of coats. In addition, we tested the validity of our additive model with 80 DADNP complexes experimentally synthetized and biologically tested (reported in >45 papers). All these DADNPs show values of MIC < 50 μg mL^-1 (cutoff used) better that MIC of AD and NP alone (synergistic or additive effect). The assays involve DADNP complexes with 10 types of NP, 6 coating materials, NP size range 5-100 nm vs. 15 different antibiotics, and 12 bacteria species. The IFPTML-LDA model classified correctly 100% (80 out of 80) DADNP complexes as biologically active. IFPMTL additive strategy may become a useful tool to assist the design of DADNP systems for antibacterial therapy taking into consideration only information about AD and NP components by separate.

Adsorption of Cu(II) by Poly-γ-glutamate/Apatite Nanoparticles

Poly-γ-glutamate/apatite (PGA-AP) nanoparticles were prepared by chemical coprecipitation method in the presence of various concentrations of poly-γ-glutamate (γ-PGA). Powder X-ray diffraction pattern and energy-dispersive spectroscopy revealed that the main crystal phase of PGA-AP was hydroxyapatite. The immobilization of γ-PGA on PGA-AP was confirmed by Fourier transform infrared spectroscopy and the relative amount of γ-PGA incorporation into PGA-AP was determined by thermal gravimetric analysis. Dynamic light scattering measurements indicated that the particle size of PGA-AP nanoparticles increased remarkably with the decrease of γ-PGA content. The adsorption of aqueous Cu(II) onto the PGA-AP nanoparticles was investigated in batch experiments with varying contact time, solution pH and temperature. Results illustrated that the adsorption of Cu(II) was very rapid during the initial adsorption period. The adsorption capacity of PGA-AP nanoparticles for Cu(II) was increased with the increase in the γ-PGA content, solution pH and temperature. At a pH of 6 and 60 °C, a higher equilibrium adsorption capacity of about 74.80 mg/g was obtained. The kinetic studies indicated that Cu(II) adsorption onto PGA-AP nanoparticles obeyed well the pseudo-second order model. The Langmuir isotherm model was fitted well to the adsorption equilibrium data. The results indicated that the adsorption behavior of PGA-AP nanoparticles for Cu(II) was mainly a monolayer chemical adsorption process. The maximum adsorption capacity of PGA-AP nanoparticles was estimated to be 78.99 mg/g.

IFPTML mapping of nanoparticle antibacterial activity vs. pathogen metabolic networks

Nanoparticles are useful antimicrobial drug-release systems, but some nanoparticles also exhibit antibacterial activity. However, investigation of their antibacterial activity is a difficult and slow process due to the numerous combinations of nanoparticle size, shape, and composition vs. biological tests, assay organisms, and multiple activity parameters to be measured. Additionally, the overuse of antibiotics has led to the emergence of resistant bacterial strains with different metabolic networks. Computational models may speed up this process, but the models reported to date do not to consider all the previous factors, and the data sources are dispersed and not curated. Thus, herein, we used an information fusion, perturbation-theory machine learning (IFPTML) approach, which is introduced by us for the first time, to fit a model for the discovery of antibacterial nanoparticles. The dataset studied had 15 classes of nanoparticles (1-100 nm) with most cases in the range of 1-50 nm vs. >20 pathogenic bacteria species with different metabolic networks. The nanoparticles studied included metal nanoparticles of Au, Ag, and Cu; oxide nanoparticles of Zn, Cu, La, Al, Fe, Sn, Ti, Cd, and Si; and metal salt nanoparticles of CuI and CdS. We used the SOFT.PTML software (our own application) with a user-friendly interface for the IFPTML calculations and a control statistics package. Using SOFT.PTML, we found a linear logistic regression equation that could model 4 biological activity parameters using only 8 variables with χ2 = 2265.75, p-level <0.05, sensitivity, Sn = 79.4, and specificity, Sp = 99.3, for 3213 cases (nanoparticle-bacteria pairs) in the training series. The model had Sn = 80.8 and Sp = 99.3 for 2114 cases in the external validation series. We also developed a random forest non-linear model with higher values of Sn and Sp = 98-99% in the training/validation series, although it was more complicated to use. SOFT.PTML has been demonstrated to be a useful tool for the analysis of complex data in nanotechnology. We also introduced a new anabolism-catabolism unbalance index of metabolic networks to reveal the biological connotation of the IFPTML predictions for antibacterial nanoparticles. These new models open a new door for the discovery of NPs vs. new bacterial species and strains with different topological structures of their metabolic networks.

Combining Ag and γ-Fe2O3 properties to produce effective antibacterial nanocomposites

The antibacterial activity of hybrid γ-Fe₂O₃/Ag nanocomposites against the bacterial pathogens E. coli (Gram-negative) and S. aureus (Gram-positive) has been studied. Silver is a well-known bactericidal agent and γ-Fe₂O₃ nanoparticles release heat when they are exposed to alternating magnetic fields. The combination of both properties to fight infections has not been previously explored. The nanocomposites were synthesized through reduction of silver nitrate in the presence of pre-synthesized superparamagnetic γ-Fe₂O₃ nanoparticles. Changing systematically the ratio of γ-Fe₂O₃ and silver precursor and the temperature of the reaction allowed obtaining superparamagnetic nanocomposites with different Ag contents and particle sizes. The antibacterial activity of the samples was tested, and the minimum inhibitory concentrations and minimum bactericidal concentrations of the nanocomposites were determined to compare the microbicidal activity of the samples. It was found that it is related with the release of silver ions from the nanocomposites. Finally, we studied the combination of the bactericidal effect of silver and magnetic hyperthermia finding a synergetic effect between them when plates containing E. coli or S. aureus bacteria with γ-Fe₂O₃/Ag nanocomposites were subjected to an alternating magnetic field. This effect is related with an increase in the release of silver ions due to that heat dissipation.

A novel Approach for Non-Invasive Lung Imaging and Targeting Lung Immune Cells

Despite developments in pulmonary radiotherapy, radiation-induced lung toxicity remains a problem. More sensitive lung imaging able to increase the accuracy of diagnosis and radiotherapy may help reduce this problem. Super-paramagnetic iron oxide nanoparticles are used in imaging, but without further modification can cause unwanted toxicity and inflammation. Complex carbohydrate and polymer-based coatings have been used, but simpler compounds may provide additional benefits. Herein, we designed and generated super-paramagnetic iron oxide nanoparticles coated with the neutral natural dietary amino acid glycine (GSPIONs), to support non-invasive lung imaging and determined particle biodistribution, as well as understanding the impact of the interaction of these nanoparticles with lung immune cells. These GSPIONs were characterized to be crystalline, colloidally stable, with a size of 12 ± 5 nm and a hydrodynamic diameter of 84.19 ± 18 nm. Carbon, Hydrogen, Nitrogen (CHN) elemental analysis estimated approximately 20.2 × 10³ glycine molecules present per nanoparticle. We demonstrated that it is possible to determine the biodistribution of the GSPIONs in the lung using three-dimensional (3D) ultra-short echo time magnetic resonance imaging. The GSPIONs were found to be taken up selectively by alveolar macrophages and neutrophils in the lung. In addition, the GSPIONs did not cause changes to airway resistance or induce inflammatory cytokines. Alveolar macrophages and neutrophils are critical regulators of pulmonary inflammatory diseases, including allergies, infections, asthma and chronic obstructive pulmonary disease (COPD). Therefore, pulmonary Magnetic Resonance (MR) imaging and preferential targeting of these lung resident cells by our nanoparticles offer precise imaging tools, which can be utilized to develop precision targeted radiotherapy as well as diagnostic tools for lung cancer, thereby having the potential to reduce the pulmonary complications of radiation.

Enhanced Antimicrobial Activity of Biofunctionalized Zirconia Nanoparticles

The effective interactions of nanomaterials with biological constituents play a significant role in enhancing their biomedicinal properties. These interactions can be efficiently enhanced by altering the surface properties of nanomaterials. In this study, we demonstrate the method of altering the surface properties of ZrO2 nanoparticles (NPs) to enhance their antimicrobial properties. To do this, the surfaces of the ZrO2 NPs prepared using a solvothermal method is functionalized with glutamic acid, which is an α-amino acid containing both COO- and NH4 + ions. The binding of glutamic acid (GA) on the surface of ZrO2 was confirmed by UV-visible and Fourier transform infrared spectroscopies, whereas the phase and morphology of resulting GA-functionalized ZrO2 (GA-ZrO2) was identified by X-ray diffraction and transmission electron microscopy. GA stabilization has altered the surface charges of the ZrO2, which enhanced the dispersion qualities of NPs in aqueous media. The as-prepared GA-ZrO2 NPs were evaluated for their antibacterial properties toward four strains of oral bacteria, namely, Rothia mucilaginosa, Rothia dentocariosa, Streptococcus mitis, and Streptococcus mutans. GA-ZrO2 exhibited increased antimicrobial activities compared with pristine ZrO2. This improved activity can be attributed to the alteration of surface charges of ZrO2 with GA. Consequently, the dispersion properties of GA-ZrO2 in the aqueous solution have increased considerably, which may have enhanced the interactions between the nanomaterial and bacteria.

Functional Nanomaterials for the Detection and Control of Bacterial Infections

Infections with multidrug-resistant bacteria that are difficult to treat with commonly used antibiotics have spread globally, raising serious public health concerns. Conventional bacterial detection techniques are time-consuming, which may delay treatment for critically ill patients past the optimal time. There is an urgent need for rapid and sensitive diagnosis and effective treatments for multidrug-resistant pathogenic bacterial infections. Advances in nanotechnology have made it possible to design and build nanomaterials with therapeutic and diagnostic capabilities. Functional nanomaterials that can specifically interact with bacteria offer additional options for the diagnosis and treatment of infections due to their unique physical and chemical properties. Here, we summarize the recent advances related to the preparation of nanomaterials and their applications for the detection and treatment of bacterial infection. We pay particular attention to the toxicity of therapeutic nanoparticles based on both in vitro and in vivo assays. In addition, the major challenges that require further research and future perspectives are briefly discussed.

Poly-Gamma-Glutamic Acid Functions as an Eective Lubricant with Antimicrobial Activity in Multipurpose Contact Lens Care Solutions

In order to perform the multiple functions of disinfection, cleansing, and storage, preservatives are often added to contact lens care solutions. The disadvantage of adding preservatives is that this often causes various eye conditions. However, lens care solutions would not be able to disinfect in the absence of such preservatives. In addition, comfort is an important issue for contact lens wearers due to the long periods of time they are worn. It has been shown that lower friction coefficients are correlated with increased comfort. We have previously developed a multipurpose contact lens care solution in which poly-gamma-glutamic acid (γ-PGA) was the main ingredient. In this study, we investigated the antimicrobial activity and lubricating property of our care solution. We showed that there was a synergetic effect of γ-PGA and chlorine dioxide on antimicrobial activity. We also demonstrated that γ-PGA functioned as a lubricating agent. Our results provided evidence of γ-PGA acting as a multi-functional polymer that could be applied in contact lens care solutions.

Regulation of Allergic Immune Responses by Microbial Metabolites

Emerging evidence demonstrates that the microbiota plays an essential role in shaping the development and function of host immune responses. A variety of environmental stimuli, including foods and commensals, are recognized by the host through the epithelium, acting as a physical barrier. Two allergic diseases, atopic dermatitis and food allergy, are closely linked to the microbiota, because inflammatory responses occur on the epidermal border. The microbiota generates metabolites such as short-chain fatty acids and poly-γ-glutamic acid (γPGA), which can modulate host immune responses. Here, we review how microbial metabolites can regulate allergic immune responses. Furthermore, we focus on the effect of γPGA on allergic T helper (Th) 2 responses and its therapeutic application.

Reduced Staphylococcus aureus biofilm formation in the presence of chitosan-coated iron oxide nanoparticles

Staphylococcus aureus can adhere to most foreign materials and form biofilm on the surface of medical devices. Biofilm infections are difficult to resolve. The goal of this in vitro study was to explore the use of chitosan-coated nanoparticles to prevent biofilm formation. For this purpose, S. aureus was seeded in 96-well plates to incubate with chitosan-coated iron oxide nanoparticles in order to study the efficiency of biofilm formation inhibition. The biofilm bacteria count was determined using the spread plate method; biomass formation was measured using the crystal violet staining method. Confocal laser scanning microscopy and scanning electron microscopy were used to study the biofilm formation. The results showed decreased viable bacteria numbers and biomass formation when incubated with chitosan-coated iron oxide nanoparticles at all test concentrations. Confocal laser scanning microscopy showed increased dead bacteria and thinner biofilm when incubated with nanoparticles at a concentration of 500 µg/mL. Scanning electron microscopy revealed that chitosan-coated iron oxide nanoparticles inhibited biofilm formation in polystyrene plates. Future studies should be performed to study these nanoparticles for anti-infective use.

Microbial synthesis of poly-γ-glutamic acid: current progress, challenges, and future perspectives

Poly-γ-glutamic acid (γ-PGA) is a naturally occurring biopolymer made from repeating units of l-glutamic acid, d-glutamic acid, or both. Since some bacteria are capable of vigorous γ-PGA biosynthesis from renewable biomass, γ-PGA is considered a promising bio-based chemical and is already widely used in the food, medical, and wastewater industries due to its biodegradable, non-toxic, and non-immunogenic properties. In this review, we consider the properties, biosynthetic pathway, production strategies, and applications of γ-PGA. Microbial biosynthesis of γ-PGA and the molecular mechanisms regulating production are covered in particular detail. Genetic engineering and optimization of the growth medium, process control, and downstream processing have proved to be effective strategies for lowering the cost of production, as well as manipulating the molecular mass and conformational/enantiomeric properties that facilitate screening of competitive γ-PGA producers. Finally, future prospects of microbial γ-PGA production are discussed in light of recent progress, challenges, and trends in this field.

Computational modeling in nanomedicine: prediction of multiple antibacterial profiles of nanoparticles using a quantitative structure-activity relationship perturbation model

AIMS

We introduce the first quantitative structure-activity relationship (QSAR) perturbation model for probing multiple antibacterial profiles of nanoparticles (NPs) under diverse experimental conditions.

MATERIALS & METHODS

The dataset is based on 300 nanoparticles containing dissimilar chemical compositions, sizes, shapes and surface coatings. In general terms, the NPs were tested against different bacteria, by considering several measures of antibacterial activity and diverse assay times. The QSAR perturbation model was created from 69,231 nanoparticle-nanoparticle (NP-NP) pairs, which were randomly generated using a recently reported perturbation theory approach.

RESULTS

The model displayed an accuracy rate of approximately 98% for classifying NPs as active or inactive, and a new copper-silver nanoalloy was correctly predicted by this model with consensus accuracy of 77.73%.

CONCLUSION

Our QSAR perturbation model can be used as an efficacious tool for the virtual screening of antibacterial nanomaterials.

Cytotoxicity and antibacterial activity of gold-supported cerium oxide nanoparticles

BACKGROUND

Cerium oxide nanoparticles (CeO2) have been shown to be a novel therapeutic in many biomedical applications. Gold (Au) nanoparticles have also attracted widespread interest due to their chemical stability and unique optical properties. Thus, decorating Au on CeO2 nanoparticles would have potential for exploitation in the biomedical field.

METHODS

In the present work, CeO2 nanoparticles synthesized by a chemical combustion method were supported with 3.5% Au (Au/CeO2) by a deposition-precipitation method. The as-synthesized Au, CeO2, and Au/CeO2 nanoparticles were evaluated for antibacterial activity and cytotoxicity in RAW 264.7 normal cells and A549 lung cancer cells.

RESULTS

The as-synthesized nanoparticles were characterized by X-ray diffraction, scanning and transmission electron microscopy, and ultraviolet-visible measurements. The X-ray diffraction study confirmed the formation of cubic fluorite-structured CeO2 nanoparticles with a size of 10 nm. All synthesized nanoparticles were nontoxic towards RAW 264.7 cells at doses of 0-1,000 μM except for Au at >100 μM. For A549 cancer cells, Au/CeO2 had the highest inhibitory effect, followed by both Au and CeO2 which showed a similar effect at 500 and 1,000 μM. Initial binding of nanoparticles occurred through localized positively charged sites in A549 cells as shown by a shift in zeta potential from positive to negative after 24 hours of incubation. A dose-dependent elevation in reactive oxygen species indicated that the pro-oxidant activity of the nanoparticles was responsible for their cytotoxicity towards A549 cells. In addition, cellular uptake seen on transmission electron microscopic images indicated predominant localization of nanoparticles in the cytoplasmic matrix and mitochondrial damage due to oxidative stress. With regard to antibacterial activity, both types of nanoparticles had the strongest inhibitory effect on Bacillus subtilis in monoculture systems, followed by Salmonella enteritidis, Escherichia coli, and Staphylococcus aureus, while, in coculture tests with Lactobacillus plantarum, S. aureus was inhibited to a greater extent than the other bacteria.

CONCLUSION

Gold-supported CeO2 nanoparticles may be a potential nanomaterial for in vivo application owing to their biocompatible and antibacterial properties.

Poly-γ-glutamic acid: production, properties and applications

Poly-γ-glutamic acid (γ-PGA) is a naturally occurring biopolymer made up of repeating units of l-glutamic acid, d-glutamic acid or both. γ-PGA can exhibit different properties (conformational states, enantiomeric properties and molecular mass). Owing to its biodegradable, non-toxic and non-immunogenic properties, it has been used successfully in the food, medical and wastewater industries. Amongst other novel applications, it has the potential to be used for protein crystallization, as a soft tissue adhesive and a non-viral vector for safe gene delivery. This review focuses on the production, properties and applications of γ-PGA. Each application of γ-PGA utilizes specific properties attributed to various forms of γ-PGA. As a result of its growing applications, more strains of bacteria need to be investigated for γ-PGA production to obtain high yields of γ-PGA with different properties. Many medical applications (especially drug delivery) have exploited α-PGA. As γ-PGA is essentially different from α-PGA (i.e. it does not involve a chemical modification step and is not susceptible to proteases), it could be better utilized for such medical applications. Optimization of γ-PGA with respect to cost of production, molecular mass and conformational/enantiomeric properties is a major step in making its application practical. Analyses of γ-PGA production and knowledge of the enzymes and genes involved in γ-PGA production will not only help increase productivity whilst reducing the cost of production, but also help to understand the mechanism by which γ-PGA is effective in numerous applications.

Magnetite nanostructures as novel strategies for anti-infectious therapy

This review highlights the current situation of antimicrobial resistance and the use of magnetic nanoparticles (MNPs) in developing novel routes for fighting infectious diseases. The most important two directions developed recently are: (i) improved delivery of antimicrobial compounds based on a drastic decrease of the minimal inhibition concentration (MIC) of the drug used independently; and (ii) inhibition of microbial attachment and biofilm development on coated medical surfaces. These new directions represent promising alternatives in the development of new strategies to eradicate and prevent microbial infections that involve resistant and biofilm-embedded bacteria. Recent promising applications of MNPs, as the development of delivery nanocarriers and improved nanovehicles for the therapy of different diseases are discussed, together with the mechanisms of microbial inhibition.

Synthesis, characterization, and antimicrobial activity of an ampicillin-conjugated magnetic nanoantibiotic for medical applications

Because of their magnetic properties, magnetic nanoparticles (MNPs) have numerous diverse biomedical applications. In addition, because of their ability to penetrate bacteria and biofilms, nanoantimicrobial agents have become increasingly popular for the control of infectious diseases. Here, MNPs were prepared through an iron salt coprecipitation method in an alkaline medium, followed by a chitosan coating step (CS-coated MNPs); finally, the MNPs were loaded with ampicillin (amp) to form an amp-CS-MNP nanocomposite. Both the MNPs and amp-CS-MNPs were subsequently characterized and evaluated for their antibacterial activity. X-ray diffraction results showed that the MNPs and nanocomposites were composed of pure magnetite. Fourier transform infrared spectra and thermogravimetric data for the MNPs, CS-coated MNPs, and amp-CS-MNP nanocomposite were compared, which confirmed the CS coating on the MNPs and the amp-loaded nanocomposite. Magnetization curves showed that both the MNPs and the amp-CS-MNP nanocomposites were superparamagnetic, with saturation magnetizations at 80.1 and 26.6 emu g(-1), respectively. Amp was loaded at 8.3%. Drug release was also studied, and the total release equilibrium for amp from the amp-CS-MNPs was 100% over 400 minutes. In addition, the antimicrobial activity of the amp-CS-MNP nanocomposite was determined using agar diffusion and growth inhibition assays against Gram-positive bacteria and Gram-negative bacteria, as well as Candida albicans. The minimum inhibitory concentration of the amp-CS-MNP nanocomposite was determined against bacteria including Mycobacterium tuberculosis. The synthesized nanocomposites exhibited antibacterial and antifungal properties, as well as antimycobacterial effects. Thus, this study introduces a novel β-lactam antibacterial-based nanocomposite that can decrease fungus activity on demand for numerous medical applications.

In vitro evaluation of new functional properties of poly-γ-glutamic acid produced by Bacillus subtilis D7

We investigated the functionality of poly-γ-glutamic acid (γ-PGA), which is produced by Bacillus subtilis D7, for its potential applications in medicine and cosmetics. The γ-PGA had angiotensin-converting enzyme (ACE) inhibition activity. ACE inhibition activity was dependent on the γ-PGA concentration; the highest ACE inhibition activity was observed at 1.25 mg/l of γ-PGA. IC50 (0.108 mg/ml) of the γ-PGA was lower than that of standard ACE inhibitory drug, N-[(S)-mercapto-2-methylpropionyl]-L-proline (0.247 mg/ml). The γ-PGA also had water-holding capacity and hygroscopicity. Furthermore, the γ-PGA inhibited growth of some pathogenic bacteria, including Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, Klebsiella pneumonia and Esherichia coli. The γ-PGA exhibited a good metal adsorption capacity; Cr (VI) adsorption capacity of γ-PGA increased with decreasing pH, and the maximal adsorption was observed at pH 2. Our results suggest that γ-PGA may be expected to be widely applied in cosmetics, biomedical and environmental industries with the feature of being less harmful to humans and the environment.

Engineered magnetic nanoparticles for biomedical applications

In the past decades, magnetic nanoparticles (MNPs) have been used in wide range of diverse applications, ranging from separation to sensing. Here, synthesis and applications of functionalized MNPs in the biomedical field are discussed, in particular in drug delivery, imaging, and cancer therapy, highlighting also recent progresses in the development of multifunctional and stimuli-responsive MNPs. The role of their size, composition, and surface functionalization is analyzed, together with their biocompatibility issues.

Synthesis, characterization, controlled release, and antibacterial studies of a novel streptomycin chitosan magnetic nanoantibiotic

This study describes the preparation, characterization, and controlled release of a streptomycin-chitosan-magnetic nanoparticle-based antibiotic in an effort to improve the treatment of bacterial infections. Specifically, chitosan-magnetic nanoparticles were synthesized by an incorporation method and were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and vibrating sample magnetometry. Streptomycin was incorporated into the nanoparticles to form a streptomycin-coated chitosan-magnetic nanoparticle (Strep-CS-MNP) nanocomposite. The release profiles showed an initially fast release, which became slower as time progressed. The percentage of drug released after 350 minutes was around 100%, and the best fit mathematical model for drug release was the pseudo-second order model. The Strep-CS-MNP nanocomposite showed enhanced antibacterial activity against methicillin-resistant Staphylococcus aureus. This study forms a significant basis for further investigation of the Strep-CS-MNP nanocomposite in the treatment of various bacterial infections.

In vitro removal of toxic heavy metals by poly(γ-glutamic acid)-coated superparamagnetic nanoparticles

Background:

Chelation therapy involving organic chelators for treatment of heavy metal intoxication can cause cardiac arrest, kidney overload, mineral deficiency, and anemia.

Methods:

In this study, superparamagnetic iron oxide nanoparticles (SPIONs) modified with an edible biopolymer poly(γ-glutamic acid) (PGA) were synthesized by coprecipitation method, characterized and evaluated for their removal efficiency of heavy metals from a metal solution, and simulated gastrointestinal fluid (SGIF).

Results:

Instrumental characterization of bare- and PGA-SPIONs revealed 7% coating of PGA on SPIONs with a spherical shape and an iron oxide spinel structure belonging to magnetite. The particle sizes as determined from transmission electron microscopy images were 8.5 and 11.7 nm for bare- and PGA-SPIONs, respectively, while the magnetization values were 70.3 and 61.5 emu/g. Upon coating with PGA, the zeta potentials were shifted from positive to negative at most of the environmental pH (3–8) and biological pH (1–8), implying good dispersion in aqueous suspension and favorable conditions for heavy metal removal. Batch studies showed rapid removal of lead and cadmium with the kinetic rates estimated by pseudo-second-order model being 0.212 and 0.424 g/mg·min, respectively. A maximum removal occurred in the pH range 4–8 in deionized water and 5–8 in SGIF corresponding to most gastrointestinal pH except for the stomach. Addition of different ionic strengths (0.001–1 M sodium acetate) and essential metals (Cu, Fe, Zn, Mg, Ca, and K) did not show any marked influence on lead removal by PGA-SPIONs, but significantly reduced the binding of cadmium. Compared to deionized water, the lead removal from SGIF was high at all pH with the Langmuir monolayer removal capacity being 98.70 mg/g for the former and 147.71 mg/g for the latter. However, a lower cadmium removal capacity was shown for SGIF (23.15 mg/g) than for deionized water (31.13 mg/g).

Conclusion:

These results suggest that PGA-SPIONs could be used as a metal chelator for clinical treatment of metal poisoning.

Bacitracin-conjugated superparamagnetic iron oxide nanoparticles: synthesis, characterization and antibacterial activity

Bacitracin-conjugated superparamagnetic iron oxide (Fe(3)O(4)) nanoparticles were prepared by click chemistry and their antibacterial activity was investigated. After functionalization with hydrophilic and biocompatible poly(acrylic acid), water-soluble Fe(3)O(4) nanoparticles were obtained. Propargylated Fe(3)O(4) nanoparticles were then synthesized by carbodiimide reaction of propargylamine with the carboxyl groups on the surface of the iron oxide nanoparticles. By further reaction with N(3)-bacitracin in a Cu(I)-catalyzed azide-alkyne cycloaddition, the magnetic Fe(3)O(4) nanoparticles were modified with the peptide bacitracin. The functionalized magnetic nanoparticles were characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, TEM, zeta-potential analysis, FTIR spectroscopy and vibrating-sample magnetometry. Cell cytotoxicity tests indicate that bacitracin-conjugated Fe(3)O(4) nanoparticles show very low cytotoxicity to human fibroblast cells, even at relatively high concentrations. In view of the antibacterial activity of bacitracin, the biofunctionalized Fe(3)O(4) nanoparticles exhibit an antibacterial effect against both Gram-positive and Gram-negative organisms, which is even higher than that of bacitracin itself. The enhanced antibacterial activity of the magnetic nanocomposites allows the dosage and the side effects of the antibiotic to be reduced. Due to the antibacterial effect and magnetism, the bacitracin-functionalized magnetic nanoparticles have potential application in magnetic-targeting biomedical applications.

Synthesis, characterization and antibacterial activity of superparamagnetic nanoparticles modified with glycol chitosan

Iron oxide nanoparticles (IONPs) were synthesized by coprecipitation of iron salts in alkali media followed by coating with glycol chitosan (GC-coated IONPs). Both bare and GC-coated IONPs were subsequently characterized and evaluated for their antibacterial activity. Comparison of Fourier transform infrared spectra and thermogravimetric data of bare and GC-coated IONPs confirmed the presence of GC coating on IONPs. Magnetization curves showed that both bare and GC-coated IONPs are superparamagnetic and have saturation magnetizations of 70.3 and 59.8 emu g-1, respectively. The IONP size was measured as ∼8-9 nm by transmission electron microscopy, and their crystal structure was assigned to magnetite from x-ray diffraction patterns. Both bare and GC-coated IONPs inhibited the growths of Escherichia coli ATCC 8739 and Salmonella enteritidis SE 01 bacteria better than the antibiotics linezolid and cefaclor, as evaluated by the agar dilution assay. GC-coated IONPs showed higher potency against E. coli O157:H7 and Staphylococcus aureus ATCC 10832 than bare IONPs. Given their biocompatibility and antibacterial properties, GC-coated IONPs are a potential nanomaterial for in vivo applications.

Dye adsorption characteristics of magnetite nanoparticles coated with a biopolymer poly(γ-glutamic acid)

Magnetite nanoparticles coated with an anionic biopolymer poly(γ-glutamic acid) (PGA-MNPs) were synthesized and characterized for their methylene blue dye adsorption capability. Both bare- and dye-loaded PGA-MNPs were characterized by FTIR, TEM and VSM measurements, revealing the PGA-MNPs to be superparamagnetic with average particle diameter being 12.4 nm and magnetization value 59.2 emu/g. The synthesized PGA-MNPs were stable in deionized, tap and river waters as well as in acidic and basic media. Redlich-Peterson and Langmuir models precisely described the isotherm and the maximum adsorption capacity was 78.67 mg/g. A pseudo-second-order equation best predicted the kinetics with a maximum adsorption attained within 5 min. Incorporation of sodium or calcium ions reduced the dye adsorption, while a raise in pH enhanced adsorption and a complete desorption occurred at pH 1.0. Dye removal mechanism by PGA-MNPs was probably due to electrostatic interaction through exchange of protons from side-chain α-carboxyl groups on PGA-MNPs surface.

Synthesis of N-halamine-functionalized silica-polymer core-shell nanoparticles and their enhanced antibacterial activity

N-halamine-functionalized silica-polymer core-shell nanoparticles with enhanced antibacterial activity were synthesized through the encapsulation of silica nanoparticles as support with polymeric N-halamine. The as-synthesized nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive x-ray spectrometry (EDX), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and Fourier transform infrared (FTIR). These N-halamine-functionalized silica-polymer core-shell nanoparticles displayed powerful antibacterial performance against both Gram-positive bacteria and Gram-negative bacteria, and their antibacterial activities have been greatly improved compared with their bulk counterparts. Therefore, these N-halamine-functionalized silica-polymer core-shell nanoparticles have the potential for various significant applications such as in medical devices, healthcare products, water purification systems, hospitals, dental office equipment, food packaging, food storage, household sanitation, etc.