Optoelectronic modulation by multi-wall carbon nanotubes

Research on a Fast-Response Thermal Conductivity Sensor Based on Carbon Nanotube Modification

Aiming at solving the slow-response problem of traditional bead-type thermal conductivity gas sensors, a fast-response thermal conductivity gas sensor can be made by using multiwalled carbon nanotubes (MWNTs), combined with the technology of carrier modification, to modify the performance of the sensor carrier. The carrier material, granular nanoscale γ-Al₂O₃/ZrO₂, was synthesized by chemical precipitation, and its particle size was found to be 50–70 nm through SEM. After the carrier material was wet-incorporated into carbon nanotubes, the composite carrier γ-Al₂O₃/ZrO₂/MWNTs was obtained. The results show that the designed thermal conductivity sensor has a fast response to methane gas, with a 90% response time of 7 s and a recovery time of 16 s. There is a good linear relationship between the sensor output and CH₄ gas concentration, with an average sensitivity of 1.15 mV/1% CH₄. Thus, the response speed of a thermal conductivity sensor can be enhanced by doping carbon nanotubes into γ-Al₂O₃/ZrO₂.

Mechano-optical effects in multiwall carbon nanotubes ethanol based nanofluids

A highly sensitive technique for analyzing surface tension and dynamic viscosity of nanofluids was reported. Multiwall carbon nanotubes suspended in ethanol were evaluated. The assistance of a Fabry-Perot interferometer integrated by a small sample volume fluid allowed us to explore the stability and mechanical properties exhibited by the nanostructures. The surface tension and dynamic viscosity of the colloid was examined by using interferometric optical signals reflected from a remnant drop pending at the end of an optical fiber. Nanosecond pulses provided by a Nd:YAG laser source with 9.5 MW/mm² at 532 nm wavelength were used to induce mechano-optical effects in the liquid drop. The mechanical parameters were approximated, taking into account single optical pulses interacting with an inelastic mass-spring-damper system.

MoS2 /Carbon Nanotube Core-Shell Nanocomposites for Enhanced Nonlinear Optical Performance

Nanocomposites of layered MoS₂ and multi-walled carbon nanotubes (CNTs) with core-shell structure were prepared by a simple solvothermal method. The formation of MoS₂ nanosheets on the surface of coaxial CNTs has been confirmed by scanning electron microscopy, transmission electron microscopy, absorption spectrum, Raman spectroscopy, and X-ray photoelectron spectroscopy. Enhanced third-order nonlinear optical performances were observed for both femtosecond and nanosecond laser pulses over a broad wavelength range from the visible to the near infrared, compared to those of MoS₂ and CNTs alone. The enhancement can be ascribed to the strong coupling effect and the photoinduced charge transfer between MoS₂ and CNTs. This work affords an efficient way to fabricate novel CNTs based nanocomposites for enhanced nonlinear light-matter interaction. The versatile nonlinear properties imply a huge potential of the nanocomposites in the development of nanophotonic devices, such as mode-lockers, optical limiters, or optical switches.

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Optical limiting effect and ultrafast saturable absorption in a solid PMMA composite containing porphyrin-covalently functionalized multi-walled carbon nanotubes

A versatile solid Poly-methyl-methacrylate (PMMA) composite containing porphyrin-covalently functionalized multi-walled carbon nanotubes (MWNTs-TPP) was prepared through free radical polymerization without additional dispersion stabilizer. Using nanosecond, femtosecond pulse Z-scan and degenerate femtosecond pump-probe techniques, we studied the optical limiting effect, ultrafast saturable absorption and transient differential transmission of the composite. Results show that the solid composite exhibits weaker optical limiting effects than that of the suspension at 532 nm under nanosecond pulse, due to the absence of nonlinear scattering mechanism. The composite also shows ultrafast saturable absorption with a relaxation time about 190 fs at 800 nm under femtosecond pulse due to band-filling effect, comparably to the suspension. The versatile solid composite can be the candidate for uses in applications of ultrafast optical switching and mode-locking element or optical limiter for nanosecond pulse.