Functionalized graphene oxide quantum dot-PVA hydrogel: a colorimetric sensor for Fe²⁺, Co²⁺ and Cu²⁺ ions

Toward Humidity-Independent Sensitive and Fast Response Temperature Sensors Based on Reduced Graphene Oxide/Poly(vinyl alcohol) Nanocomposites

Flexible temperature sensors are becoming increasingly important these days. In this work, we explore graphene oxide (GO)/poly(vinyl alcohol) (PVA) nanocomposites for potential application in temperature sensors. The influence of the mixing ratio of both materials, the reduction temperature, and passivation on the sensing performance has been investigated. Various spectroscopic techniques revealed the composite structure and atomic composition. These were complemented by semiempirical quantum chemical calculations to investigate rGO and PVA interaction. Scanning electron and atomic force microscopy measurements were carried out to evaluate dispersion and coated film quality. The temperature sensitivity has been evaluated for several composite materials with different compositions in the range from 10 to 80 °C. The results show that a linear temperature behavior can be realized based on rGO/PVA composites with temperature coefficients of resistance (TCR) larger than 1.8% K-1 and a fast response time of 0.3 s with minimal hysteresis. Furthermore, humidity influence has been investigated in the range from 10% to 80%, and a minor effect is shown. Therefore, we can conclude that rGO/PVA composites have a high potential for excellent passivation-free, humidity-independent, sensitive, and fast response temperature sensors for various applications. The GO reduction is tunable, and PVA improves the rGO/PVA sensor performance by increasing the tunneling effect and band gap energy, consequently improving temperature sensitivity. Additionally, PVA exhibits minimal water absorption, reducing the humidity sensitivity. rGO/PVA maintains its temperature sensitivity during and after several mechanical deformations.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Multifunctional nanomaterials and nanocomposites for sensing and monitoring of environmentally hazardous heavy metal contaminants

The applications of conventional sensors are limited by the long response time, high cost, large detection limit, low sensitivity, complicated usage and low selectivity. These sensors are nowadays replaced by Nanocomposite-based modalities and nanomaterials which are known for their high selectivity and physical and chemical properties. These nanosensors effectively detect heavy metal contaminants in the environment as the discharge of heavy metals into natural water as a result of human activity has become a global epidemic. Exposure to these toxic metals might induce many health-related complications, including kidney failure, brain injury, immune disorders, muscle paleness, cardiac damage, nervous system impairment and limb paralysis. Therefore, designing and developing novel sensing systems for the detection and recognition of these harmful metals in various environmental matrices, particularly water, is of extremely important. Emerging nanotechnological approaches in the past two decades have played a key role in overcoming environmentally-related problems. Nanomaterial-based fabrication of chemical nanosensors has widely been applied as a powerful analytical tool for sensing heavy metals. Portability, high sensitivity, on-site detection capability, better device performance and selectivity are all advantages of these nanosensors. The detection and selectivity have been improved using molecular recognition probes for selective binding on different nanostructures. This study aims to evaluate the sensing properties of various nanomaterials such as metal-organic frameworks, fluorescent materials, metal-based nanoparticles, carbon-based nanomaterials and quantum dots and graphene-based nanomaterials and quantum dots for heavy metal ions recognition. All these nano-architectures are frequently served as effective fluorescence probes to directly (or by modification with some large or small biomolecules) sense heavy metal ions for improved selectivity. However, efforts are still needed for the simultaneous designing of multiple metal ion-based detection systems, exclusively in colorimetric or optical fluorescence nanosensors for heavy metal cations.

Modified polymeric hydrogels for the detection of Zn2+ in E. coli bacterial cells and Zn2+, Cd2+ and Hg2+ in industrial effluents

The article focusses on exploring the real-time application of meta-benziporphodimethene (m-BPDM) embedded polyacrylamide/carboxymethylguargum (PAM/CMG) hydrogel. The hydrogel-based sensor is highly selective for Zn²⁺, Cd²⁺ and Hg²⁺ with no significant response to other competitive cations including Na⁺, K⁺, Ca²⁺, Cr³⁺, Pb²⁺, Mg²⁺, Mn²⁺, Co²⁺, Cu²⁺ in aqueous medium. Initially, the stability of the hydrogel has been examined at different pH conditions. The sensitivity of the hydrogel was found to be 0.5, 1, and 2 ppm in 1, 2 and 3 h for Hg²⁺, Zn²⁺, and Cd²⁺, respectively, at pH 6. The sensor exhibits colour change from red to bluish-green with Zn²⁺, Cd²⁺ and Hg²⁺ in water over other ions. The modified hydrogel matrix displayed a unique naked eye turn-on colorimetric sensor selectivity for Zn²⁺, Cd²⁺ and Hg²⁺ ions in the aqueous solutions of Escherichia coli (E. coli) bacterial cells and industrial effluents. During the detection process, the zinc metal ions released because of cell lysis bind with hydrogel, in the former. The binding of Zn²⁺ causes the change in the colour of hydrogel from red to bluish-green, which was visually detected. The m-BPDM does not leach out and is stable in the hydrogel matrix. The sensing of Zn²⁺, Cd²⁺ and Hg²⁺ was achieved by directly adding hydrogel into industrial effluent without any pretreatment of effluent. The quantitative determination of Zn²⁺, Cd²⁺ and Hg²⁺ in industrial effluent was performed by the atomic absorption spectroscopy technique just to confirm the results obtained with the hydrogel.

Study on the microstructure of the symbiosis of coal-based graphene and coal-based graphene quantum dots: preparation and characterization

Coal-based graphene sheets (GS) and coal-based graphene quantum dots (GQDs) are usually prepared separately. In this paper, symbiosis of coal-based GS and coal-based GQDs was successfully prepared with our proposed preparation method by using three raw coals with different reflectance (collected from Qinshui coalfield, Shanxi Province) as carbon sources. The results showed that coal-based GS and coal-based GQDs can exist stably in the symbiosis and are distributed in different layers, and the GQDs are freely distributed between layers of GS. The average number of GS (N_ave) in the three symbiosis is about 7 and the average interlayer spacing (d₀₀₂) is about 0.3887 nm. The average diameter of GQDs in the three symbiosis is about 4.255 nm and the averaged₀₀₂is about 0.230 nm. The averageN_aveof the three symbiosis was about 3 and the averaged₀₀₂is about 0.361 nm. The morphology and crystal parameters of symbiosis is more similar to that of graphene, the elements are only carbon and oxygen. In the prepared symbiosis, the higher the reflectance of raw coal, the smoother the lattice skeleton and the less vortex-layer structure of GS, and the larger the diameter and the denser the six membered ring of GQDs. The C and O functional groups of the prepared symbionts are similar. The higher the reflectance of coal, the higher the content of C-C/C=C. Under ultraviolet light, the prepared products all emit blue, and the higher the reflectance of coal, the higher the ultraviolet absorption, and the stronger the fluorescence intensity.

Metal ion sensing with graphene quantum dots: detection of harmful contaminants and biorelevant species

Graphene quantum dots (GQDs) are attractive materials for use as highly selective and sensitive chemical sensors, owing to their simple preparation and affordability. GQDs have been successfully deployed as sensors for toxic metal ions, which is a significant issue due to the ever-increasing environmental contamination from agricultural and industrial activities. Despite the success of GQDs in this area, the mechanisms which underpin GQD-metal ion specificity are rarely explored. This lack of information can result in difficulties when attempting to replicate published procedures and can limit the judicious design of new highly selective GQD sensors. Furthermore, there is a dearth of GQD examples which selectively detect biologically relevant alkali and alkaline earth metals. This review will present the current state of GQDs as metal ion sensors for harmful contaminants, highlighting and discussing the discrepancies that exist in the proposed mechanisms regarding metal ion selectivity. The emerging field of GQD sensors for biorelevant metal ion species will also be reviewed, with a perspective to the future of this highly versatile material.

Rapid and efficient colorimetric sensing of clindamycin and Fe3+ using controllable phyto-synthesized silver/silver chloride nanoparticles by Syzygium cumini fruit extract

Abstract

The first evidence of a green, single-step, and additive-free process for the fabrication of silver/silver chloride nanoparticles (Ag/AgCl NPs) by fruit extract of Syzygium cumini (S. cumini) without the usage of any stabilizer and halide source was provided. The formation of nanoparticles was optimized to control the shape, size, and stability via various pHs of the reaction mixture, the quantity of fruit extract, temperature, concentrations of silver ion, and reaction time. The optimal conditions were determined: pH = 7.0, the quantity of the leaf extract = 3.0 mL, silver ion concentration = 1.0 mM, temperature = 60 °C, and incubation time = 40 min. As an application in colorimetric sensing, the ability of the prepared Ag/AgCl NPs to sense clindamycin and Fe3+ ion in an aqueous medium was investigated. The SPR band and color of the solution of Ag/AgCl NPs undergo dramatic changes in exposure to clindamycin with new SPR peaks appearing at 500 nm, accompanied by a color change from yellow to pink due to the aggregation of NPs. Under the optimized pH of 3.0, this sensor was shown a linear dynamic range from 10.0 to 100.0 µM with a LOD of 1.2 µM and good linear relationships (R2 = 0.99) for clindamycin. On the other hand, the quenching of the SPR peak at 412 nm was used to monitor the Fe3+ ions with wide linear ranges of 10.0–350.0 µM under the optimized pH (pH = 9) with a LOD of 5.6 µM. In addition, the proposed sensor displayed applicability in the real sample containing clindamycin (in capsules and injection ampoules) and Fe3+ ions (in water samples) detection.

Graphical Abstract

A Highly Sensitive and Selective Probe for the Colorimetric Detection of Mn(II) Based on the Antioxidative Selenium and Nitrogen Co-Doped Carbon Quantum Dots and ABTS•

Herein, selenium and nitrogen co-doped carbon quantum dots (Se/N-CQDs) were hydrothermally synthesized by using citric acid, histidine, and sodium selenite, which had sp³ and sp² hybridized carbon atoms and showed excitation-dependent fluorescence behavior. Furthermore, due to the redox reaction of ABTS^•+ and Se/N-CQDs, Se/N-CQDs had the excellent antioxidant capacity that it was demonstrated by scavenging ABTS^•+ with the fading of blue. Based on the synergistic effect of Se/N-CQDs and Mn(II) on ABTS^•+, Se/N-CQDs and ABTS^•+, as a stable, sensitive, selective, and reproducible colorimetric sensor, was applied to the detection of Mn(II) with a detection limit of 1.69 μM and a linear range of 0 to 142.90 μM. More importantly, the probe was successfully applied to detecting Mn(II) in tap water, illustrating that it could be a promising tool for Mn(II) detection in water environments.

Flexible conductive hydrogel fabricated with polyvinyl alcohol, carboxymethyl chitosan, cellulose nanofibrils, and lignin-based carbon applied as strain and pressure sensor

Employing renewable, environmentally friendly, low-cost lignocellulose to design flexible pressure sensitive hydrogel (PSH) as strain and pressure sensors in wearable electronics represents the global perspective to build sustainable and green society. Lignin-based carbon (LC), as the conductive filler, were uniform distributed in the hydrogel system composing by polyvinyl alcohol (PVA), carboxymethyl chitosan (CMC), and cellulose nanofibrils (CNF) to assemble PSH. The analysis revealed that the cross-linking of components through hydrogen bonds formed among hydroxyl group, amino group and carboxyl group exerts the hydrogel with stretching ability and fatigue resistance. The results indicated that the fracture tensile strength and compression stress of the PC/CNF/LC hydrogel were 133 kPa and 37.7 kPa, respectively. Because of the existence of LC, PSH hydrogel exhibits the sensitive deformation-dependent conductivity and can be applied as a flexible strain and pressure sensor monitoring body motions such as elbow flexion, finger bend and palm grip. Therefore, the assembled PSH hydrogel is a prominent candidate applying as the strain and pressure sensor devices.

Design, Bioanalytical, and Biomedical Applications of Aptamer-Based Hydrogels

Aptamers are special types of single-stranded DNA generated by a process called systematic evolution of ligands by exponential enrichment (SELEX). Due to significant advances in the chemical synthesis and biotechnological production, aptamers have gained considerable attention as versatile building blocks for the next generation of soft materials. Hydrogels are high water-retainable materials with a three-dimensional (3D) polymeric network. Aptamers, as a vital element, have greatly expanded the applications of hydrogels. Due to their biocompatibility, selective binding, and molecular recognition, aptamer-based hydrogels can be utilized for bioanalytical and biomedical applications. In this review, we focus on the latest strategies of aptamer-based hydrogels in bioanalytical and biomedical applications. We begin this review with an overview of the underlying design principles for the construction of aptamer-based hydrogels. Next, we will discuss some bioanalytical and biomedical applications of aptamer-based hydrogel including biosensing, target capture and release, logic devices, gene and cancer therapy. Finally, the recent progress of aptamer-based hydrogels is discussed, along with challenges and future perspectives.

New water-soluble colorimetric pH and metal ione sensor based on graphene quantum dot modified with alizarine red S

A new colorimetric sensor was designed for the screening pH changes in solutions, as well as, detection of some cations. The sensor preparation includes the chemical binding of alizarine red S (ARS) as a sensor of pH and cation to graphene quantum dots (GQD). Loading ARS on GQD led to the formation of water soluble sensor which finally responded to the colorimetric detection of some cations in water. Solubility and stability of the sensor in water indicate that the sensor is an ideal system for the biological and environmental applications. To demonstrate the applicability of the new sensor, the colorimetric responds of sensor were examined for some cations including Fe³⁺, Co²⁺, Ca²⁺, As³⁺, Cd²⁺, Hg²⁺, Pb²⁺, Sn²⁺, Al³⁺, and Cr³⁺. The colorimetric detections of all the ions were performable individually in a solution. In addition, GQD-ARS as a colorimetric sensor detected Co²⁺ at pH < 0.6 with limit of quantification 0.08 mM and Fe³⁺ at 0.6 < pH < 4.0 with limit of quantification 0.03 mM in the mixture of cations.

Electrostatically controlled plasmonic effects of gold nanoparticles with indigo-carmine functionation for rapid and straightforward colorimetric detection of Cu2+ ions

A colorimetric sensor is fabricated for effective on-site monitoring of Cu²⁺ ions content based on the distance-dependent optical properties of gold nanoparticles-polyvinyl alcohol-citrate (Au-NPs-PVA-Cy) which plasmonic effect electrostatically was controlled by PVA-Cy stabilizing indigo-carmine (IC) functionalizing. The surface-modified gold nanoparticles were extremely stable with a strong affinity toward Cu²⁺ ions. Citrate ion was employed as a cross-linking agent for pairs of Au-NPs-PVA-Cy and IC for stabilizing coordination between Cu²⁺ ion and IC. The active materials were characterized by UV-Vis, SEM, DLS, XRD, FT-IR, and EDS analyses. The sensor response toward Cu²⁺ ion was found to be linear in the range of 0.0974 to 3.27 μM with the limit of detection and quantification values of 0.021 and 0.07 μM, respectively. The sensor represents good sensitivity and stability, promisingly suggesting this device for the accurate and repeatable determination of Cu²⁺ in real water samples. The effect of different foreign ions on the selectivity of the sensor was checked. The sensor has a long shelf life in comparison to other similar colorimetric sensors. Also, it shows a repeatable response with RSD% of 2.02%. Thus, the sensing of Cu²⁺ ions based on the electrostatically control plasmonic of Au-NPs-PVA-Cy was developed with proper signaling based on the color change from dark blue to light blue as readily seen by the naked eye. Furthermore, the efficient environmental applicability of this simple and rapid determination of the Cu²⁺ sensor is proved.

Low-temperature phyto-synthesis of copper oxide nanosheets: Its catalytic effect and application for colorimetric sensing

The last decade has seen a remarkable detonation in modifying chemical processes for nanomaterial synthesis to make them 'green'. Owing to the unique properties of nanomaterial and with regard to environmental issues, in this study, a new alternative and fast eco-friendly approach for the synthesis of copper oxide nanosheets (CuO-NSs) using Terminalia catappa (Indian almond) leaf extract as a renewable and non-toxic reducing agent and efficient stabilizer was reported. It is noteworthy to mention that the present fabrication process can open up the possibility of fast, low cost and high efficiency synthesis of CuO nanostructures with an interesting morphology of nanosheets at ambient temperature and pressure. Optimization of important factors such as pH, the quantity of leaf extract, copper precursor concentration, incubation time and temperature on the formation of CuO-NSs were investigated. The formation of bioreduced CuO-NSs was certified by UV-Vis spectroscopy, XRD, TEM analysis and FT-IR spectroscopy. Due to good stability, and excellent catalytic activity of the synthesized CuO-NSs, they are exerted to degrade of MB dye in water as a model color pollutant in the presence of NaBH₄ at room temperature. Furthermore, color properties of CuO nanostructures aid us to apply these biosynthesized nanomaterials in the design of optical sensors for detection of Fe²⁺ and Fe³⁺ ions. In view of many advantages of the current optical sensors based on CuO-NSs, such as eco-friendly, cost-effective, and straightforward design, the sensing system presents a potential application in environmental science.

Nitrogen doped graphene quantum dots as a fluorescent probe for mercury(II) ions

A highly selective fluorescent probe for Hg²⁺ is reported. It consists of nitrogen doped graphene quantum dots (NGQDs) that are nearly spherical in shape, have an average diameter of 2.7 nm and excitation-independent emission. The blue fluorescence of the NGQDs (with maximum excitation/emission at 378/447 nm) is quenched by Hg²⁺ due to both dynamic and static quenching. The probe has a wide detection range (2.5 μM - 800 μM) and a limit of detection of 2.5 μM. The dynamic and static quenching constants are 417 M^-1 and 63500 M^-1, respectively. The probe was used to quantfy Hg²⁺ in spiked real water samples with satisfactory results. Graphical abstract ᅟ.

Stimuli-responsive graphene-incorporated multifunctional chitosan for drug delivery applications: a review

INTRODUCTION

Recently, the use of chitosan (CS) in the drug delivery has reached an acceptable maturity. Graphene-based drug delivery is also increasing rapidly due to its unique physical, mechanical, chemical, and electrical properties. Therefore, the combination of CS and graphene can provide a promising carrier for the loading and controlled release of therapeutic agents.

AREAS COVERED

In this review, we will outline the advantages of this new drug delivery system (DDS) in association with CS and graphene alone and will list the various forms of these carriers, which have been studied in recent years as DDSs. Finally, we will discuss the application of this hybrid composite in other fields.

EXPERT OPINION

The introducing the GO amends the mechanical characteristics of CS, which is a major problem in the use of CS-based carriers in drug delivery due to burst release in a CS-based controlled release system through the poor mechanical strength of CS. Many related research on this area are still not fully unstated and occasionally they seem inconsistent in spite of the intent to be complementary. Therefore, a sensitive review may be needed to understand the role of graphene in CS/graphene carriers for future drug delivery applications.

Ultrahigh luminescence quantum yield lanthanide coordination polymer as a multifunctional sensor

The investigation and development of advanced multifunctional and sensitive sensors with high luminescent quantum yield and the capability of detecting different analytes, such as metal ions, is imperative. Due to its inherent properties the lanthanide coordination complex is one candidate for sensing applications, particularly for multifunctional sensors. Herein, we present two series of alkali ion decorated lanthanide coordination polymers (Ln-CPs), which show ultrahigh luminescence quantum yields (QYs) of 77% (1a) and 92% (2a). To the best of our knowledge, 1a represents the first trifunctional lanthanide complex sensor that can simultaneous detect and discriminate three different analytes, namely H+/Cd2+/Cr3+ through a multimode optical response. Furthermore, the limit of detection (LOD) for Cr3+ is an ultralow value of 2.0 × 10-9 M with a sensing time of 2 h, which is comparable to the most sensitive Cr3+ chemosensor. More interestingly, 92% (2a) is an unprecedented luminescence QY among the reported lanthanide coordination complexes.

Quantum Dots-Doped Tapered Hydrogel Waveguide for Ratiometric Sensing of Metal Ions

Advances in fluorescent nanomaterials and photonics have led to a new generation of photonic devices for applications in biosensing, diagnostics, and therapy. However, for clinical utility, biocompatibility and limited light guiding in tissues pose significant challenges. Here, we report a new type of soft, biocompatible, and tapered optical waveguide with capability of delivering light in deep tissues and demonstrate it as a ratiometric probe for rapid point-of-care detection of metal ions. The waveguide was made from quantum dots (QDs)-incorporated biocompatible hydrogels and coated with a thin sensing film to ensure fast exchanges with the surrounding analytes. The tapered design of the waveguide allows more light extraction for efficient excitation of the coating film. To achieve ratiometric measurements, two types of QDs with well-resolved emission bands are synthesized and immobilized in the waveguide and the coating film, respectively. We show that the ratiometric readout of the waveguide sensor is free of environmental disturbances and exhibits negligible drifts when applied in various environments such as being immersed in water or embedded in tissues. The waveguide device provides a new photonic-sensing platform that may allow being engineered to sense a wide range of metal ions and analytes.

Recent progress in two-dimensional inorganic quantum dots

This review critically summarizes recent progress in the categories, synthetic routes, properties, functionalization and applications of 2D materials-based quantum dots (QDs).

Manganese(ii) enhanced fluorescent nitrogen-doped graphene quantum dots: a facile and efficient synthesis and their applications for bioimaging and detection of Hg2+ ions

Manganese ion (Mn²⁺) bonded nitrogen-doped graphene quantum dots (Mn(ii)-NGQDs) with water solubility have been successfully synthesized by a simple, one-pot hydrothermal carbonization, using sodium citrate, glycine and manganese chloride as raw materials.

Tuning the wettability and photoluminescence of graphene quantum dots via covalent modification

In this paper, we have tuned the dual properties, i.e., wettability and photoluminescence of GQDs by simply covalent modification with long chain alkyl (–C₁₂H₂₇) groups.

Hydrogel Based Biosensors for In Vitro Diagnostics of Biochemicals, Proteins, and Genes

Hydrogel-based biosensors have drawn considerable attention due to their various advantages over conventional detection systems. Recent studies have shown that hydrogel biosensors can be excellent alternative systems to detect a wide range of biomolecules, including small biochemicals, pathogenic proteins, and disease specific genes. Due to the excellent physical properties of hydrogels such as the high water content and stimuli-responsive behavior of cross-linked network structures, this system can offer substantial improvement for the design of novel detection systems for various diagnostic applications. The other main advantage of hydrogels is the role of biomimetic three-dimensional (3D) matrix immobilizing enzymes and aptamers within the detection systems, which enhances their stability. This provides ideal reaction conditions for enzymes and aptamers to interact with substrates within the aqueous environment of the hydrogel. In this review, we have highlighted various novel detection approaches utilizing the outstanding properties of the hydrogel. This review summarizes the recent progress of hydrogel-based biosensors and discusses their future perspectives and clinical limitations to overcome.

Ethylene diamine mediated cobalt nanoparticle studded graphene oxide quantum dots with tunable photoluminescence properties

The present study demonstrates ethylene diamine mediated in situ synthesis of cobalt oxide nanoparticles (Co₃O₄NPs) studded on graphene oxide quantum dots (GOQDs) showing reversible on/off fluorescence switching.